| Electronic Components Datasheet Search |
|
HD6417618 Datasheet(PDF) 40 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
HD6417618 Datasheet(HTML) 40 Page - Renesas Technology Corp |
|
40 / 646 page ![]() Section 1 Overview Rev. 6.00 Jun. 12, 2007 Page 8 of 610 REJ09B0131-0600 1.4 Pin Functions Table 1.1 Pin Functions Classifi- cation Abbr. I/O Pin Name Description Power supply Vcc Input Power Supply Power supply for the internal logic of this LSI. All the Vcc pins must be connected to the system power supply. This LSI does not operate correctly if there is a pin left open. Vss Input Ground Ground pins. All the Vss pins must be connected to the system power supply (0 V). This LSI does not operate correctly if there is a pin left open. VccQ Input Power Supply Power supply for input/output pins. All the VccQ pins must be connected to the system power supply. This LSI does not operate correctly if there is a pin left open. VssQ Input Ground Ground pins. All the VssQ pins must be connected to the system power supply (0 V). This LSI does not operate correctly if there is a pin left open. Clock Vcc (PLL1) Input Power Supply for PLL1 Power supply pin for the on-chip PLL1 oscillator Vss (PLL1) Input Ground for PLL1 Ground pin for the on-chip PLL1 oscillator Vcc (PLL2) Input Power Supply for PLL2 Power supply pin for the on-chip PLL2 oscillator Vss (PLL2) Input Ground for PLL2 Ground pin for the on-chip PLL2 oscillator EXTAL Input External Clock Connects to a crystal resonator. An external clock is also input on this pin. For details on connection of an external clock, see section 8, Clock Pulse Generator (CPG). XTAL Output Crystal Connects to a crystal resonator. CKIO Output System Clock Supplies the system clock to external devices. CK_PHY Output PHY Clock Supplies the clock for external IEEE802.3-PHY. Operating mode control MD5, MD3 to MD0 Input Mode Setting Sets operating mode. The signal levels of these pins must not be changed during operation. Pins MD2 to MD0 are used for setting clock mode, pin MD3 is for setting bus width mode for area 0, and pin MD5 is for setting endian. |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |