| Electronic Components Datasheet Search |
|
R8C/20 Datasheet(PDF) 254 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
R8C/20 Datasheet(HTML) 254 Page - Renesas Technology Corp |
|
254 / 501 page ![]() R8C/20 Group, R8C/21 Group 14. Timers Rev.2.00 Aug 27, 2008 Page 238 of 458 REJ09B0250-0200 i = 0 or 1, j = either A, B, C or D Table 14.33 PWM3 Mode Specifications Item Specification Count Sources f1, f2, f4, f8, f32, fOCO40M Count Operations The TRD0 register is incremented. (The TRD1 is not used.) PWM Waveform PWM period: 1/fk × (m + 1) Active level width of TRDIOA0 output: 1/fk × (m - n) Active level width of TRDIOB0 output: 1/fk × (p - q) fk: Frequency of count source m: Setting value in the TRDGRA0 register n: Setting value in the TRDGRA1 register p: Setting value in the TRDGRB0 register q: Setting value in the TRDGRB1 register Count Start Condition Write 1 (count starts) to the TSTART0 bit in the TRDSTR register. Count Stop Conditions • Write 0 (count stops) to the TSTART0 bit in the TRDSTR register when the CSEL0 bit in the TRDSTR register is set to 1. • The PWM output pin holds output level before the count stops • When the CSEL0 bit in the TRDSTR register is set to 0, the count stops at the compare match in the TRDGRA0 register. • The PWM output pin holds level after output change by the compare match. Interrupt Request Generation Timing • Compare match (the content in the TRDi register matches with the content in the TRDGRji register.) • The TRD0 register overflows TRDIOA0, TRDIOB0 Pin Functions PWM output TRDIOC0, TRDIOD0, TRDIOA1 to TRDIOD1 Pin Functions Programmable I/O port INT0 Pin Function Programmable I/O port, pulse output forced cutoff signal input or INT0 interrupt input Read from Timer The count value can be read by reading the TRD0 register. Write to Timer The value can be written to the TRD0 register. Selection Functions • Pulse output forced cutoff signal input (refer to 14.3.4 Pulse Output Forced Cutoff) • Select the active level every pin. • Buffer operation (refer to 14.3.2 Buffer Operation) m + 1 TRDIOA0 output TRDIOB0 output (When “H” is selected for the active level) p - q m - n n + 1 p + 1 q + 1 |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |