Electronic Components Datasheet Search |
|
ADP5585ACPZ-00-R7 Datasheet(PDF) 32 Page - Analog Devices |
|
|
ADP5585ACPZ-00-R7 Datasheet(HTML) 32 Page - Analog Devices |
32 / 40 page ADP5585 Data Sheet Rev. C | Page 32 of 40 Bit(s) Bit Name Access Description 4 to 2 RESET_TRIG_TIME[2:0] Read/write Defines the length of time that the reset events must be active before a reset signal is generated. All events must be active at the same time for the same duration. RESET_TRIG_TIME[2:0] is common to both RESET1 and RESET2. 000 = immediate. 001 = 1.0 sec. 010 = 1.5 sec. 011 = 2.0 sec. 100 = 2.5 sec. 101 = 3.0 sec. 110 = 3.5 sec. 111 = 4.0 sec. 1 to 0 RESET_PULSE_WIDTH[1:0] Read/write Defines the pulse width of the reset signals. RESET_PULSE_WIDTH[1:0] is common to both RESET1 and RESET2. 00 = 500 µs. 01 = 1 ms. 10 = 2 ms. 11 = 10 ms. PWM_OFFT_LOW Register 0x2F Table 55. Register 0x2F, PWM_OFFT_LOW Bit Descriptions Bit(s) Bit Name Access Description 7 to 0 PWM_OFFT_LOW_BYTE[7:0] Read/write Lower eight bits of PWM off time. PWM_OFFT_HIGH Register 0x30 Table 56. PWM_OFFT_HIGH Bit Descriptions Bit(s) Bit Name Access Description 7 to 0 PWM_OFFT_HIGH_BYTE[7:0] Read/write Upper eight bits of PWM off time. PWM_ONT_LOW Register 0x31 Table 57. PWM_ONT_LOW Bit Descriptions Bit(s) Bit Name Access Description 7 to 0 PWM_ONT_LOW_BYTE[7:0] Read/write Lower eight bits of PWM on time. PWM_ONT_HIGH Register 0x32 Table 58. PWM_ONT_HIGH Bit Descriptions Bit(s) Bit Name Access Description 7 to 0 PWM_ONT_HIGH_BYTE[7:0] Read/write Upper eight bits of PWM on time. Note that updated PWM times are not latched until this byte is written to. PWM count times are referenced from the internal oscillator. The fastest oscillator setting is 500 kHz (2 µs increments). Therefore, the maximum period is 2 µs × 216 = 131 ms This gives PWM frequencies from 500 kHz down to 7.6 Hz. PWM_CFG Register 0x33 Table 59. PWM_CFG Bit Descriptions Bit(s) Bit Name Access Description 7 to 3 N/A Reserved. 2 PWM_IN_AND 0 = no external AND’ing. 1 = PWM signal AND’ed with an externally supplied PWM signal (C3). 1 PWM_MODE Read/write Defines PWM mode. 0 = continuous. 1 = executes one PWM period, then sets PWM_EN to 0. 0 PWM_EN Read/write Enable PWM generator. |
Similar Part No. - ADP5585ACPZ-00-R7 |
|
Similar Description - ADP5585ACPZ-00-R7 |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |