 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
SW4STM32C Datasheet(PDF) 14 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
SW4STM32C Datasheet(HTML) 14 Page - STMicroelectronics |
|
|
14 / 99 page  STM32 ecosystem outlines AN4989 14/99 DocID030181 Rev 2 Both stand-alone and embedded versions share the same ST-LINK/V2 basic features: • 5 V power supplied by a USB connector • USB 2.0 full-speed-compatible interface • USB standard A to Mini- B cable • JTAG/serial wire debug (SWD) specific features: – 1.65 V to 3.6 V application voltage supported on the JTAG/SWD interface and 5 V tolerant inputs – JTAG cable for connection to a standard JTAG 20-pin pitch 2.54 mm connector – JTAG supported – SWD and serial wire viewer (SWV) communication supported • Device Firmware Upgrade (DFU) feature supported • Status LED which blinks during communication with the PC • Operating temperature 0 °C to 50 °C • 1000 V rms high-isolation voltage (ST-LINK/V2-ISOL only) Embedded versions usually supports the following additional features: • Virtual-COM-port interface on USB. (VCP) • Mass storage interface on USB The availability of these additional features depends on software version. In order to identify the ST-LINK version on a board and the related features associated with it, please refer STMicroelectronics technical note Overview of the ST-LINK embedded in STM32 MCU Nucleo, Discovery Kits and Eval Boards (TN1235). On-board ST-LINK does not support JTAG port. Note: For Nucleo and Discovery, JTAG port signal can be wired through Morpho / Arduino™ connectors. On EVAL boards, there is a dedicated 20-pin connector. The use of ST-LINK requires the software packages listed in Table 2. Note: STSW-LINK007 is included in STSW-LINK004. STSW-LINK009 is included in most IDE installation packages (IAR™, Keil®, SW4STM32) and tools. Tip: It is recommended to use the latest firmware version of the on-board ST-LINK interface. Firmware upgrade can be performed thanks to the ST-LINK utility software (refer to Section 2.2.4: ST-LINK utility on page 19). Table 2. ST-LINK software pack Part Number Description STSW-LINK004 STM32 ST-LINK utility (refer to Section 2.2.4: ST-LINK utility on page 19) STSW-LINK007 ST-LINK, ST-LINK/V2, ST-LINK/V2-1 firmware upgrade STSW-LINK009 ST-LINK, ST-LINK/V2, ST-LINK/V2-1 USB driver signed for Windows® 7, Windows® 8, Windows® 10 |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
English ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
