24

Sensor [Inspection/ID Model FQ2-S4 Series]

*1. The types of characters to be read are the same as those of FQ2-CH Optical Character Recognition Sensor (p.25).

*2. The types of cedes to be read are the same as those of FQ-CR1 Multi Code Reader (p.25).

*3. The types of cedes to be read are the same as those of FQ-CR2 2D Code Reader (p.25).

*4. The maximum number of registerable scenes depends on settings due to restrictions on memory.

Item

Inspection/ID Model

Model

NPN

FQ2-S40

@@@@

FQ2-S40

@@@@-M

FQ2-S40

@@@@-08 FQ2-S40@@@@-08M FQ2-S40@@@@-13 FQ2-S40@@@@-13M

PNP

FQ2-S45

@@@@

FQ2-S45

@@@@-M

FQ2-S45

@@@@-08 FQ2-S45@@@@-08M FQ2-S45@@@@-13 FQ2-S45@@@@-13M

Field of view

Refer to Ordering Information on p.19. (Tolerance (field of view):

±10% max.)

Select a lens according to the field of view

and installation distance.

Refer to the optical chart on p.30.

Installation distance

Main

functions

Inspection items

Shape Search III, Shape Search II, Search, Sensitive Search, Area, Color Data, Edge Position, Edge Pitch, Edge Width, Labeling,

OCR *1, Bar code *2, 2D-code *2, 2D-code (DMP) *3, and Model Dictionary

Number of

simultaneous

measurements

32

Position compensation Supported (360º Model position compensation, Edge position compensation, Linear correction)

Number of

registered scenes

32 *4

Calibration

Supported

Retry function

Normal retry, Exposure retry, Scene retry, Trigger retry

Print Quality

Grading Function

Applicable standards: ISO/IEC TR 29158 (AIM DPM-1-2006)

(Applicable code: Data Matrix ECC200)

Image

input

Image processing

method

Real color

Monochrome

Real color

Monochrome

Real color

Monochrome

Image filter

High dynamic range (HDR), image adjustment (Color Gray Filter, Weak smoothing, Strong smoothing, Dilate, Erosion, Median, Extract

edges, Extract horizontal edges, Extract vertical edges, Enhance edges, Background suppression), polarizing filter (attachment), and

white balance (Sensors with Color Cameras only), Brightness Correction

Image elements

1/3-inch color CMOS

1/3-inch

Monochrome CMOS

1/2-inch color CMOS

1/2-inch

Monochrome CMOS

1/2-inch color CMOS

1/2-inch

Monochrome CMOS

Shutter

Built-in lighting ON: 1/250 to 1/50,000s

Built-in lighting OFF: 1/1 to 1/50,000s

Built-in lighting ON: 1/250 to 1/60,000s

Built-in lighting OFF: 1/1 to 1/4155s

1/1 to 1/4155s

Processing resolution 752

× 480

928

× 828

1280

× 1024

Partial input function Supported horizontally only.

Supported horizontally and vertically

Image display

Zoom-in/Zoom-out/Fit, Rotating by 180

°

Lens mounts

---

C-mount

Lighting

Lighting method

Pulse

---

Lighting color

White

---

Data

logging

Measurement data

In Sensor: 1,000 items (If a Touch Finder is used, results can be saved up to the capacity of an SD card.)

Images

In Sensor: 20 images (If a Touch Finder is used, images can be saved up to the capacity of an SD card.)

Auxiliary function

Statistical data, Test Measurements, I/O monitor, Password function, Simulation software, Sensor error history, Calibration,

Math (arithmetic, calculation functions, trigonometric functions, and logic functions)

Measurement trigger

External trigger (single or continuous)

Communications trigger (Ethernet TCP no-protocol, Ethernet UDP no-protocol, Ethernet FINS/TCP no-protocol, EtherNet/IP, PLC Link ,

or PROFINET)

I/O

specificati

ons

Input signals

7 signals

• Single measurement input (TRIG)

• Control command input (IN0 to IN5)

Output signals

3 signals

• Control output (BUSY)

• Overall judgement output (OR)

• Error output (ERROR)

Note: The assignments of the three output signals (OUT0 to OUT2) can also be changed to the following:

• READY

• RUN

• STG (Strobe trigger)

• OR0 (Item0 judgement) to OR31 (Item31 judgement)

• Exp.0 judgement to Exp.31 judgement

Ethernet

specifications

100Base-TX/10Base-T

Communications

Ethernet TCP no-protocol, Ethernet UDP no-protocol, Ethernet FINS/TCP no-protocol, EtherNet/IP, PLC Link , or PROFINET

I/O expansion

Possible by connecting FQ-SDU1_ Sensor Data Unit. 11 inputs and 24 outputs

RS-232C

Possible by connecting FQ-SDU2_ Sensor Data Unit. 8 inputs and 7 outputs

Ratings

Power supply voltage 21.6 to 26.4 VDC (including ripple)

Current consumption 2.4 A max.

0.3 A max.

Environme

ntal

immunity

Ambient

temperature

range

Operating: 0 to 40ºC

Storage: -25 to 65ºC

(with no icing or condensation)

Ambient humidity range Operating and storage: 35% to 85% (with no condensation)

Ambient atmosphere No corrosive gas

Vibration resistance

(destruction)

10 to 150 Hz, single amplitude: 0.35 mm, X/Y/Z directions

8 min each, 10 times

Shock resistance

(destruction)

150 m/s2 3 times each in 6 direction (up, down, right, left, forward, and backward)

Degree of protection IEC 60529 IP67 (Except when Polarizing Filter Attachment is mounted or connector cap is removed.) IEC 60529 IP40

Materials

Sensor: PBT, PC, SUS

Mounting Bracket: PBT

Polarizing Filter Attachment: PBT, PC

Ethernet connector: Oil-resistance vinyl compound

I/O connector: Lead-free heat-resistant PVC

Cover: Zinc-plated steel,

Thickness: 0.6 mm

Case: Aluminum diecast alloy (ADC-12)

Mounting base: Polycarbonate ABS

Weight

Narrow View/Standard View:Approx.160 g

Wide View:Approx.150 g

Approx. 160 g without base,

Approx. 185 g with base

Accessories included

with sensor

Mounting Bracket (FQ-XL) (1)

Polarizing Filter Attachment (FQ-XF1) (1)

Instruction Manual, Member Registration Sheet

Mounting Base (FQ-XLC) (1)

Mounting Screw (M3

× 8mm) (4)

Instruction Manual, Member Registration Sheet

LED class

Risk Group 2 (IEC62471)

---