 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
SARA-R5 Datasheet(PDF) 12 Page - u-blox AG |
|
|
|||||||||||||||||||||||||||||
SARA-R5 Datasheet(HTML) 12 Page - u-blox AG |
|
|
12 / 43 page  SARA-R5 series - Data sheet UBX-19016638 - R06 Interfaces Page 12 of 43 C1-Public 2 Interfaces 2.1 Power management 2.1.1 Module supply input (VCC) SARA-R5 series modules must be supplied through the VCC pins by a proper external DC power supply providing a nominal voltage within the normal operating range (see Table 9). Voltage must be stable, because during operation the current drawn from VCC may vary significantly, based on the power consumption profile of the LTE Cat M1 and LTE Cat NB2 radio access technologies (described in the SARA-R5 series system integration manual [2]). The three VCC pins of SARA-R5 series modules are internally connected to both the internal Power Amplifier and the internal Power Management Unit, which integrates voltage regulators generating all the internal supply voltages needed by the module for the designed operations, as the supply voltage for the generic digital interfaces (V_INT), the supply voltage for the SIM interface (VSIM), and the supply voltage for the internal GNSS receiver. It is important that the system power supply circuit is able to withstand the maximum pulse current during a transmit burst at maximum power level (see Table 11). 2.1.2 Generic digital interfaces supply output (V_INT) SARA-R5 series modules provide a 1.8 V supply rail output on the V_INT pin, which is internally generated when the module is switched on. The same voltage domain is used internally to supply the generic digital interfaces of the module. The V_INT supply output can be used in place of an external discrete regulator. ☞ It is recommended to provide accessible test point directly connected to the V_INT pin. 2.2 Antenna interface 2.2.1 Cellular antenna RF interface (ANT) The ANT pin is the cellular RF antenna I/O interface, designed with 50 characteristic impedance. 2.2.2 GNSS antenna RF interface (ANT_GNSS) ☞ The GNSS antenna RF interface is not supported by SARA-R500S and SARA-R510S modules. The ANT_GNSS pin represents the GNSS RF input of the SARA-R510M8S modules, designed with 50 characteristic impedance and with an internal DC block, suitable for both active and/or passive GNSS antennas due to the built-in SAW filter followed by an LNA in front of the integrated high performing u-blox M8 concurrent positioning engine. 2.2.3 Antenna detection (ANT_DET) The ANT_DET pin is an Analog to Digital Converter (ADC) input with a current source provided by SARA-R5 series modules to sense the external antenna presence (as an optional feature), evaluating the DC resistance to GND by means of an externally implemented circuit (for more details, see the u-blox SARA-R5 series system integration manual [2] and the SARA-R5 series AT commands manual [1]). |
Similar Part No. - SARA-R5 |
|
Similar Description - SARA-R5 |
|
|
Link URL |
| Privacy Policy |
| ALLDATASHEET.COM |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
English ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
