| Electronic Components Datasheet Search |
|
LX2160A-RDB-B Datasheet(PDF) 8 Page - NXP Semiconductors |
|
|
|||||||||||||||||||||||||||||
LX2160A-RDB-B Datasheet(HTML) 8 Page - NXP Semiconductors |
|
8 / 116 page ![]() Table 3. LX2160ARDB features (continued) LX2160ARDB feature Specification Description I2C Six I2C controllers (I2C1, I2C2, I2C3, I2C4, I2C5, and I2C6) • Most system devices (other than UEFI) are accessed via I2C1, which is multiplexed to isolate address conflicts and reduce capacitive load • I2C1 is translated to 3V3_SB, allowing programming access to devices, such as power controllers, clocks, and memories, while the system is off • I2C2 is only used for SDHC1_CD_B and SDHC1_WP • I2C3 is only used for CAN1 input/output • I2C4 is only used for CAN2 input/output • I2C5 is used for UEFI support (memory and RTC) • I2C6 is used for optional AQR107 PHY access Serial ports Two UART ports (UART1 and UART2) A dual-stack DB9 male connector providing two UART connectors, each connected through an RS-232 transceiver USB 3.0 Two high-speed USB 3.0 ports with integrated PHYs • Supports super-speed (5 Gbit/s), high-speed (480 Mbit/s), full-speed (12 Mbit/s), and low-speed (1.5 Mbit/s) operations • USB#1 3.0 port is connected to a Type A host connector • USB#2 3.0 port is configured as On-The-Go (OTG) with a Micro-AB connector Ethernet Two tri-speed RGMII interfaces • 10 Mb / 100 Mb / 1 Gb Ethernet is supported • An RJ45 connector with link and activity status is used with each RGMII interface • IEEE 1588™ precision time protocol (PTP) is supported through an onboard header (J29) Clocks System clock (SYSCLK) and DDR clock (DDRCLK) • 100 MHz differential clock to DIFF_SYSCLK • 100 MHz single-ended clock to DDRCLK SerDes clocks • 161.1328125 MHz clock to SerDes1 PLL 1 and PLL 2 • 100 MHz clock to SerDes2 PLL 1 and PLL 2 • 100 MHz clock to SerDes3 PLL 1 and PLL 2 • 100 MHz clock to AQR107 10 GbE PHY 1 and 2 • 25 MHz clock to IN112525 25 GbE PHY • 156.25 MHz clock to CS4223 40 GbE PHY • 100 MHz clock to x4 and x8 PCIe slots Ethernet clocks 125 MHz clocks to Ethernet controllers and IEEE 1588 port Power supplies • 12 V, 5 V, 3.3 V, and 5 V (standby) ATX power supplies • 0.8 V (VDD) for the LX2160A core Table continues on the next page... NXP Semiconductors LX2160ARDB Overview QorIQ LX2160A Reference Design Board Reference Manual, Rev. 4, 07/2020 Reference Manual 8 / 116 |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |