2

© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard

C1070_C0G_HV_FT-CAP_SMD • 2/28/2023

Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)

High Voltage with Flexible Termination System (HV FT-CAP), C0G Dielectric, 500 – 10,000 VDC (Commercial Grade)

Ordering Information

C

2225

X

393

J

C

G

A

C

TU

Ceramic Case Size

(L" x W")

Specification/

Series

Capacitance

Code (pF)

Capacitance

Tolerance1

Rated

Voltage

(VDC)

Dielectric

Failure

Rate/

Design

Termination Finish2

Packaging/Grade

(C-Spec)

0603

0805

1206

1210

1808

1812

1825

2220

2225

X = Flexible

Termination

Two significant

digits and

number of

zeros.

B = ±0.10 pF

C = ±0.25 pF

D = ±0.5 pF

F = ±1%

G = ±2%

J = ±5%

K = ±10%

M = ±20%

C = 500

B = 630

D = 1,000

F = 1,500

G = 2,000

Z = 2,500

H = 3,000

K = 10,000

G =

C0G

A =

N/A

C = 100% Matte Sn

L = SnPb (5% Pb minimum)

See

“Packaging

C-Spec Ordering

Options Table”

1

Additional capacitance tolerance offerings may be available. Contact KEMET for details.

2

Additional termination finish options may be available. Contact KEMET for details.

Packaging C-Spec Ordering Options Table

Packaging Type1

Packaging/Grade

Ordering Code (C-Spec)

Commercial Grade1

Bulk Bag

Not required (Blank)

7" Reel/Unmarked

TU

13" Reel/Unmarked

7411 (EIA 0603 and smaller case sizes)

7210 (EIA 0805 and larger case sizes)

7" Reel/Unmarked/2mm pitch2

7081

13" Reel/Unmarked/2mm pitch2

7082

Automotive Grade3

7" Reel

AUTO

13" Reel/Unmarked

AUTO7411 (EIA 0603 and smaller case sizes)

AUTO7210 (EIA 0805 and larger case sizes)

7" Reel/Unmarked/2mm pitch2

3190

13" Reel/Unmarked/2mm pitch2

3191

1

Default packaging is “Bulk Bag”. An ordering code C-Spec is not required for “Bulk Bag” packaging.

1

The terms “Marked” and “Unmarked” pertain to laser marking option of capacitors. All packaging options labeled as “Unmarked” will contain

capacitors that have not been laser marked. The option to laser mark is not available on these devices. For more information see “Capacitor Marking”.

2

The 2mm pitch option allows for double the packaging quantity of capacitors on a given reel size. This option is limited to EIA 0603 (1608 metric) case

size devices. For more information regarding 2mm pitch option see “Tape & Reel Packaging Information”.

3

Reeling tape options (Paper or Plastic) are dependent on capacitor case size (L” x W”) and thickness dimension. See “Chip Thickness/Tape & Reel

Packaging Quantities” and “Tape & Reel Packaging Information”.

3

For additional Information regarding “AUTO” C-Spec options, see “Automotive C-Spec Information”.

3

All Automotive packaging C-Specs listed exclude the option to laser mark components. The option to laser mark is not available on these devices. For

more information see “Capacitor Marking”.