ADL5566ACPZ-R7 datasheet(7/24 Pages) AD

7 / 24 page

Data Sheet

ADL5566

Rev. C | Page 7 of 24

PIN CONFIGURATION AND FUNCTION DESCRIPTIONS

VIP1

VIP2

VIN2

VON2

VOP2

VOP1

VON1

VIN1

ADL5566

TOP VIEW

1. NC = NO CONNECT. DO NOT CONNECT TO THIS PIN.

2. THE EXPOSED PADDLE IS INTERNALLY CONNECTED TO

GND AND MUST BE SOLDERED TO A LOW IMPEDANCE

GROUND PLANE.

Figure 2. Pin Configuration

Table 4. Pin Function Descriptions

Pin No.

Mnemonic

Description

VIN1

Balanced Differential Input for Amplifier 1. Biased to VCC/2, typically ac-coupled. Input for AV = 16 dB.

VIP1

Balanced Differential Input for Amplifier 1. Biased to VCC/2, typically ac-coupled. Input for AV = 16 dB.

3, 4, 7, 8, 12, 15,

16, 19, 23, 24

No Connect. Do not connect to this pin. Solder to ground.

VIP2

Balanced Differential Input for Amplifier 2. Biased to VCC/2, typically ac-coupled. Input for AV = 16 dB.

VIN2

Balanced Differential Input for Amplifier 2. Biased to VCC/2, typically ac-coupled. Input for AV = 16 dB.

ENBL2

Enable for Amplifier 2. Apply positive voltage (1.3 V < ENBL2 < VCC2) to activate device.

VCOM2

Common-Mode Voltage. A voltage applied to this pin sets the common-mode voltage of the inputs and

outputs of Amplifier 2. If left open, VCOM2 = VCC/2. Typically, it is decoupled to ground with a 0.1 µF

capacitor.

VCC2

Positive Supply for Amplifier 2.

VON2

Balanced Differential Output for Amplifier 2. Biased to VCC/2, typically ac-coupled.

VOP2

Balanced Differential Output for Amplifier 2. Biased to VCC/2, typically ac-coupled.

VOP1

Balanced Differential Output for Amplifier 1. Biased to VCC/2, typically ac-coupled.

VON1

Balanced Differential Output for Amplifier 1. Biased to VCC/2, typically ac-coupled.

VCC1

Positive Supply for Amplifier 1.

VCOM1

Common-Mode Voltage. A voltage applied to this pin sets the common-mode voltage of the inputs and

outputs of Amplifier 1. If left open, VCOM1 = VCC/2. Typically, it is decoupled to ground with a 0.1 µF

capacitor.

ENBL1

Enable for Amplifier 1. Apply positive voltage (1.3 V < ENBL1 < VCC1) to activate device.

The exposed paddle is internally connected to GND and must be soldered to a low impedance ground plane.

ADL5566ACPZ-R7 Datasheet(PDF) 7 Page - Analog Devices

ADL5566ACPZ-R7 Datasheet(HTML) 7 Page - Analog Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

Datasheet Download

Link URL