WM8803CDTSLASHV datasheet(38/45 Pages) WOLFSON

38 / 45 page

WM8803

Product Preview

PP Rev 1.1 September 2003

READ DATA DETAILED DOCUMENTATION

DO7

DO6

DO5

DO4

DO3

DO2

DO1

DO0

OUTSQY

OUTCSF

OUTFSC

OUTVFL

OUTEMP

OUTPCM

OUTERR

Table 21 Output Register: Interrupt Data Output (0xEB)

OUTERR:

ERROR output

(Outputs the state when read)

0: No transmission error and the PLL circuit is in the PLL locked state.

1: Either a transmission error occurred or the PLL circuit is in the unlocked

state.

OUTPCM:

AUDIO output (Outputs the state when read)

0: Non-PCM signal not detected.

1: Non-PCM signal detected.

OUTEMP:

Channel status emphasis detection

(Outputs the state when read)

0: No pre-emphasis.

1: 50/15µs pre-emphasis was applied.

OUTVFL:

Parity flag detection

(Outputs the state when read)

0: No error.

1: Parity error detected.

OUTFSC:

Input fs calculation result

(Cleared after read)

0: No input fs calculation result update.

1: The fs calculation result was updated.

OUTCSF:

First 48 bits of the channel status update result

(Cleared after read)

0: This data was not updated.

1: The data has been updated.

OUTQSY:

Sub-code Q data readout load signal detection

(Cleared after read)

0: Not detected.

1: Detected.

WM8803CDT/V Datasheet(PDF) 38 Page - Wolfson Microelectronics plc

WM8803CDT/V Datasheet(HTML) 38 Page - Wolfson Microelectronics plc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45

Datasheet Download

Link URL