2

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com C1081_C0G_HV_FT_AUTO_SMD • 2/29/2016

Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)

High Voltage with Flexible Termination System (HV FT-CAP), C0G Dielectric, 500 – 3,000 VDC (Automotive Grade)

Packaging C-Spec Ordering Options Table

Packaging/Grade

7" Reel

AUTO

13" Reel / Unmarked

AUTO7411 (EIA 0603 and smaller case sizes)

AUTO7210 (EIA 0805 and larger case sizes)

3190

3191

1

Reeling tape options (Paper or Plastic) are dependent on capacitor case size (L” x W”) and thickness dimension. See “Chip Thickness/Tape & Reel Packaging

Quantities” and “Tape & Reel Packaging Information”.

2

The 2 mm pitch option allows for double the packaging quantity of capacitors on a given reel size. This option is limited to EIA 0603 (1608 metric) case size

devices. For more information regarding 2 mm pitch option see “Tape & Reel Packaging Information”.

3

All Automotive packaging C-Specs listed exclude the option to laser mark components. Please contact KEMET if you require a laser marked option. For more

information see “Capacitor Marking”.

3

For additional Information regarding “AUTO” C-Spec options, see “Automotive C-Spec Information”.

Benefits

• AEC-Q200 automotive qualified

• −55°C to +125°C operating temperature range

• Superior flex performance (up to 5 mm)

• Lead (Pb)-Free, RoHS, and REACH compliant

• EIA 0805, 1206, 1210, 1808, 1812, 1825, 2220 and 2225

case sizes

• DC voltage ratings of 500 V, 630 V, 1 KV, 1.5 KV, 2 KV,

2.5 KV and 3 KV

• Capacitance offerings ranging from 1 pF to 39 nF

• Available capacitance tolerances of ±0.10 pF, ±0.25 pF,

±0.5 pF, ±1%, ±2%, ±5%, ±10% and ±20%

• No piezoelectric noise

• Extremely low ESR & ESL

• High thermal stability

• High ripple current capability

• Preferred capacitance solution at line frequencies & into the

MHz range

• No capacitance change with respect to applied rated DC voltage

• Negligible capacitance change with respect to temperature from

−55°C to +125°C

• No capacitance decay with time

• Non-polar device, minimizing installation concerns

• 100% pure matte tin-plated termination finish allowing for

excellent solderability

Applications

Typical applications include switch mode power supplies (input filters, resonators, tank circuits, snubbed circuits, output filters), high

voltage coupling and DC blocking, lighting ballasts, voltage multiplier circuits, DC/DC converters and coupling capacitors in Ćuk

converters. Markets include power supply, LCD fluorescent backlight ballasts, HID lighting, telecom equipment, industrial and medical

equipment/control, LAN/WAN interface, analog and digital modems, and automotive.