804-R010-330 datasheet(15/32 Pages) MAGNETROL

15 / 32 page

50-604 Kotron Model 804 Sentinel II RF Level Transmitter

2.5.4 QuickCal

The Sentinel II Level Transmitter has a special QuickCal

menu for quick and easy calibration. With this menu,

entry of a low calibration point and a high calibration

point, which correspond to the 4–20 mA span, is possible.

The advantage of QuickCal is that it is not necessary to

enter the general programming menu to perform basic

setup of the unit. Following is the QuickCal menu

structure:

Run Mode:

Warning

Password

Set LO Point

Set HI Point

NOTE: If the QuickCal menu is accidentally pressed, depress the ENT

key (no other keys) three times when the “warning” message

appears.

Key

Function

0 – 9

For numeric entry of parameters

Decimal point

DEL

To delete an incorrectly entered character

ENT

For storing new values into memory

(up/down

Used to step through the menu and/or

arrow keys)

option choices

Quick calibration menu

Following is a step-by-step procedure for using the

QuickCal menu. Before beginning, ensure that level in the

tank is at the low level (4 mA). Begin at the RUN mode:

Key

Current Menu

Location

Display

Comments

None

Run

Magnetrol Intl

0.0 level units

This is RUN mode.

QuickCal

WARNING

SETTINGS

WILL BE LOST

ENT

QuickCal

Enter Password

Enter the system password

(factory default is 0804)

ENT

QuickCal

Set LO Point

– 0

Move the level in the vessel

to desired 4 mA output point.

Enter the actual level

(default units are in inches)

ENT

QuickCal

Set HI Point

– 0

Move the level in the vessel

to desired 20 mA output

point. Enter the actual level.

ENT

Run

Magnetrol Intl

x.x inches

x.x will correspond to level

in vessel.

804-R010-330 Datasheet(PDF) 15 Page - Magnetrol International, Inc.

804-R010-330 Datasheet(HTML) 15 Page - Magnetrol International, Inc.

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32

Datasheet Download

Link URL