| Electronic Components Datasheet Search |
|
HD6432138SW Datasheet(PDF) 812 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
HD6432138SW Datasheet(HTML) 812 Page - Renesas Technology Corp |
|
812 / 1061 page ![]() Section 25 Electrical Characteristics Rev. 4.00 Jun 06, 2006 page 758 of 1004 REJ09B0301-0400 25.3.7 Usage Note (1) The F-ZTAT and mask ROM versions have been confirmed as fully meeting the reference values for electrical characteristics shown in this manual. However, actual performance figures, operating margins, noise margins, and other properties may vary due to differences in the manufacturing process, on-chip ROM, layout patterns, etc. When system evaluation testing is carried out using the F-ZTAT version, the same evaluation tests should also be conducted for the mask ROM version when changing over to that version. (2) On-chip power supply step-down circuit The following products incorporate an internal power supply step-down circuit, which automatically drops down the internal power supply voltage to the optimum internal voltage level: the F-ZTAT A-mask version of the H8S/2138 (HD64F2138A) and the mask ROM versions of the H8S/2138 and H8S/2137 (HD6432138S, HD6432138SW, HD6432137S, and HD6432137SW). The voltage-stabilization capacitor (0.47 µF one or two connected in series) must be connected between the VCL (internal power supply step-down) and V SS pins. Figure 25.3 shows the connection of the external capacitors. For the 5- or 4-V version whose power supply (V CC) voltage exceeds 3.6 V, do not connect the VCL pin in a product incorporating an internal step-down circuit to the V CC power supply. (Connect the VCC1 pin to the V CC power supply as usual.) For the 3-V version whose power supply (V CC) voltage is 3.6 V or lower, connect both the VCL and VCC1 pins to the system power supply. When changing from the F-ZTAT versions not incorporating an internal step-down circuit to the F-ZTAT A-mask versions or mask ROM versions incorporating an internal step-down circuit, the VCL pin has the same pin location as the VCC2 pin. Therefore, note that the circuit patterns differ between these two types of products. |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |