SL2S3003 datasheet(32/82 Pages) NXP

32 / 82 page

NXP Semiconductors

SL2S3003/SL2S3003TT

ICODE 3 (TagTamper)

8.2.4 Configuration of delivered ICs

NXP ICODE 3 ICs are delivered with the following configuration:

• The unique identifier is unique and read-only.

• The write access allows changes to user blocks, AFI, DSFID, EAS, and passwords (password protection

disabled).

• All password bytes are 00h for the Read and Write protection password, for the EAS/AFI password, and for

the Config password.

• All password bytes are 0Fh for the privacy mode and label Destroy passwords.

• User data memory is not password protected.

• Password protected privacy Mode is disabled.

• EAS and AFI password protection is disabled.

• The status of EAS mode is not defined.

• AFI is supported and not defined

• DSFID is supported and not defined.

• The user data memory is not defined.

• NFC mirror feature is disabled.

Note:

1. As the EAS mode is undefined at delivery, enable or disable EAS mode according to your application

requirements during the test or initialization phase.

2. If password protection is not required and depending on the targeted application, write random passwords

during the label initialization (recommendation).

8.3 Communication principle

For the detailed description of the protocol and timing refer to ISO/IEC 15693-2 [2] (modulation, bit-coding,

framing), and ISO/IEC 15693-3 [3] (anti-collision, timing, protocol).

SL2S3003/SL2S3003TT

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 3.0 — 28 March 2024

32 / 82

SL2S3003 Datasheet(PDF) 32 Page - NXP Semiconductors