6 Specifications

For complete electrical and mechanical specifications of the DLPR410, see the XCF16P product specification

listed in Related Documentation.

6.1 Absolute Maximum Ratings

over operating free-air temperature (unless otherwise noted) (see (1) (2))

MIN

MAX

UNIT

Internal supply voltage

Relative to ground

–0.5

2.7

V

I/O supply voltage

Relative to ground

–0.5

4.0

V

JTAG I/O supply voltage

Relative to ground

–0.5

4.0

V

Input voltage with respect to ground

–0.5

3.6

V

–0.5

3.6

V

Voltage applied to high-impedance output

–0.5

3.6

V

–0.5

3.6

V

Junction temperature

125

°C

Storage temperature, ambient

–65

150

°C

(1)

Stresses beyond those listed under Absolute Maximum Ratings can cause permanent damage to the device. These are stress ratings

only, and functional operation of the device at these or any other conditions beyond those indicated under Section 6.3 is not implied.

Exposure to absolute-maximum-rated conditions for extended periods can affect device reliability.

(2)

Maximum DC undershoot below GND must be limited to either 0.5 V or 10 mA. During transitions, the device pins can undershoot to

–2 V or overshoot to 7 V, provided this overshoot or undershoot lasts less than 10 ns and with the forcing current being limited to 200

mA.

6.2 ESD Ratings

VALUE

UNIT

Electrostatic

discharge

Human body model (HBM), per ANSI/ESDA/JEDEC JS-001, all pins

(2)

2000

V

(1)

Electrostatic discharge (ESD) to measure device sensitivity and immunity to damage caused by assembly line electrostatic discharges

in to the device.

(2)

JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.

6.3 Recommended Operating Conditions

over operating free-air temperature range (unless otherwise noted)

MIN

NOM

MAX

UNIT

Internal voltage supply

1.65

1.8

2.0

V

Supply voltage for output drivers

2.5-V operation

2.3

2.5

2.7

V

JTAG I/O Supply voltage

2.5-V operation

2.3

2.5

2.7

V

Low-level input voltage

2.5-V operation

0

0.7

V

High-level input voltage

2.5-V operation

1.7

3.6

V

Output voltage

0

V

500

ns

Operating ambient temperature

–40

85

°C

6.4 Thermal Information

Refer to the XCF16P product specifications.

6.5 Electrical Characteristics

Refer to the XCF16P product specifications at www.xilinx.com.

DLPR410

DLPS027G – AUGUST 2012 – REVISED AUGUST 2021

www.ti.com

6

Submit Document Feedback

Copyright © 2021 Texas Instruments Incorporated

Product Folder Links: DLPR410