| Electronic Components Datasheet Search |
|
FT313HQ-R Datasheet(PDF) 28 Page - Future Technology Devices International Ltd. |
|
|
|||||||||||||||||||||||||||||
FT313HQ-R Datasheet(HTML) 28 Page - Future Technology Devices International Ltd. |
|
28 / 67 page ![]() Copyright © 2013 Future Technology Devices International Limited 28 Document No.: FT_000589 FT313H USB2.0 HS Host Controller Datasheet Version 1.2 Clearance No.: FTDI# 318 Bit Name Type Default value Description The Port Enable Bit and Suspend Bit of this register define the port state as follows: Bits[Port Enable, Suspend] Port State 0X Disable 10 Enable 11 Suspend At the suspend state, the downstream propagation of the data is blocked on this port, except for the port reset. While at the suspend state, the port is sensitive to resume detection. Writing a ‘0’ to this bit is ignored by the host controller. The host controller will unconditionally set this bit to a ‘0’ when: The software sets Force Port Resume bit to a ‘0’ (From a one) The software sets Port Reset bit to a ‘1’ (From a ‘0’) Note: Before setting this bit, RUN/STOP bit should be set to 0. 6 F_PO_RESM R/W 1’b0 Force Port Resume 1 = Resume detected/driven on port. 0 = No resume detected/driven on port. Software sets this bit to a ‘1’ to resume signal. The host controller sets this bit to a ‘1’ if a J-to-K transition is detected while the port is in the suspend state. When this bit transits to a ‘1’ for the detection of a J-to-K transition, the Port Change Detect bit in USBSTS register is also set to a ‘1’. [5:4] Reserved RO 2’b00 - 3 PO_EN_CHG R/WC 1’b0 Port Enable/Disable Change 1 = Port enable/disable status has changed. 0 = No change 2 PO_EN R/W 1’b0 Port Enable/Disable 1 = Enable 0 = Disable Ports can only be enabled by the host controller as a part of the reset and enable. Software cannot enable a port by writing a one to this field. 1 CONN_CHG R/WC 1’b0 Connect Status Change 1 = Change current connect status 0 = No change. This bit indicates a change has occurred in the current connect status of the port. 0 CONN_STS RO 1’b0 Current Connect Status 1 = Device is presented on the port. 0 = No device is presented. |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |