SL2S3003FUD datasheet(36/82 Pages) NXP

36 / 82 page

NXP Semiconductors

SL2S3003/SL2S3003TT

ICODE 3 (TagTamper)

8.5.2.8 LOCK AFI

As defined in ISO/IEC 15693-3.

Option 0 (Option flag not set) is supported.

Option 1 (Option flag set) is supported.

Note:

1. The command can be password protected. Refer to Section 8.5.3.16 "PASSWORD PROTECT EAS/AFI".

2. To lock the AFI, you can set the OTP_AFI_LOCK bit to 1 with the WRITE CONFIG command to block 30 of

the configuration memory. Refer to Table 9.

3. To avoid unauthorized change of the AFI, lock or password protect the AFI.

8.5.2.9 WRITE DSFID

As defined in ISO/IEC 15693-3.

Option 0 (Option flag not set) is supported.

Option 1 (Option flag set) is supported.

The DSFID can also be written by a WRITE CONFIG command to block 16 of the configuration memory

containing the DSFID. Refer to Table 9.

Also, the WRITE CONFIG command to block 16 of the configuration memory can write DSFID. Refer to Table 9.

8.5.2.10 LOCK DSFID

As defined in ISO/IEC 15693-3.

Option 0 (Option flag not set) is supported.

Option 1 (Option flag set) is supported.

Also, setting the OTP_DSFID_LOCK bit to 1 with the WRITE CONFIG command to block 28 of the configuration

memory can lock the DSFID. See Table 9 and Table 26.

8.5.2.11 GET SYSTEM INFORMATION

As defined in ISO/IEC 15693-3.

The TAG type of the ICODE 3 IC is "01h".

8.5.2.12 GET MULTIPLE BLOCK SECURITY STATUS

As defined in ISO/IEC 15693-3.

SL2S3003/SL2S3003TT

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 3.0 — 28 March 2024

36 / 82

SL2S3003FUD Datasheet(PDF) 36 Page - NXP Semiconductors