| Electronic Components Datasheet Search |
|
WM8510GEDS/V Datasheet(PDF) 8 Page - Wolfson Microelectronics plc |
|
|
|||||||||||||||||||||||||||||
WM8510GEDS/V Datasheet(HTML) 8 Page - Wolfson Microelectronics plc |
|
8 / 81 page ![]() WM8510 Production Data w PD Rev 4.1 December 2006 8 TERMINOLOGY 1. MICN input only in single ended microphone configuration. Maximum input signal to MICP without distortion is -3dBV. 2. Hold Time is the length of time between a signal detected being too quiet and beginning to ramp up the gain. It does not apply to ramping down the gain when the signal is too loud, which happens without a delay. 3. Ramp-up and Ramp-Down times are defined as the time it takes the PGA to change its gain by 6dB. 4. All hold, ramp-up and ramp-down times scale proportionally with MCLK 5. Signal-to-noise ratio (dB) – SNR is a measure of the difference in level between the full scale output and the output with no signal applied. (No Auto-zero or Automute function is employed in achieving these results). 6. THD (dB) – THD is a ratio, of the rms values, of Noise Signal. 7. The maximum output voltage can be limited by the speaker power supply. If MONOBOOST=1 then SPKVDD should be 1.5xAVDD or higher to prevent clipping taking place in the output stage. |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |