3

Gasket Maker Anaerobic Adhesives

GM10 • GM18 • GM74

Technical Data

November 2016

Product

Description

anaerobic sealants formulated to replace pre-cut gaskets or used as form-in-place

gaskets that cure at room temperature and seal rigid assemblies of any shape or

size with high temperature (300°F - 400°F) resistance. Additionally, these products

fill pits, scratches, and gouges in the flange surface without having to grind or

skim the mating surfaces.

Specific

Features

 3M™ Scotch-Weld™ High Temperature Gasket Maker GM10 is a fast set,

form-in- place gasket maker for many rigid, metal assemblies in high

temperature (400°F) applications. It can be applied by tube, tracing, roll coating, or

screen printing to provide an instant low pressure seal.

 3M™ Scotch-Weld™ Gasket Maker GM18 is a tough, flexible form-in-place

gasket maker ideal for sealing fitting joints and flanges such as gearbox and

engine casings, fuel and water pumps, auto thermostats, pipe flanges, and other

mated surfaces. It is compatible with aluminum applications and also provides

an instant low pressure seal and does not shrink or relax.

Common

Features

 Prevent corrosion

 Shock and vibration resistance

 Paste (before cure)

 Fast setting

 24 h cure at room temperature

 Seal against fluid leakage

Typical

Uncured

Physical

Properties

Note: The following technical information and data should be considered

representative or typical only and should not be used for specification purpose

GM10

GM18

GM74

Color

Red

Red

Red

Chemistry

Modified Urethane

Acrylate

Modified Urethane

Acrylate

Modified Urethane

Acrylate

Viscosity (cP)

Fixture time* (min)