LM3590 datasheet(4/9 Pages) NSC

4 / 9 page

Electrical Characteristics (Notes 2, 6) (Continued)

Note 6: All room temperature limits are 100% tested or guaranteed through statistical analysis. All limits at temperature extremes are guaranteed by correlation

using standard Statistical Quality Control methods (SQC). All limits are used to calculate Average Outgoing Quality Level (AOQL). Typical numbers are not

guaranteed, but do represent the most likely norm.

Note 7: The current source is connected internally between VIN and VIOUT. The voltage across the current source, [VIN −VIOUT], is referred to as headroom voltage.

For the current source to regulate properly, a minimum headroom voltage must be present across it. Minimum required headroom voltage is proportional to the

current flowing through the current source, as dictated by this equation: VHR-MIN = 300mV x (IOUT ÷ 20mA).

Note 8: An internal 500k

Ω pull-down resistor is connected between the EN and GND pins.

Functional Block Diagram

20081314

LM3590 Datasheet(PDF) 4 Page - National Semiconductor (TI)

LM3590 Datasheet(HTML) 4 Page - National Semiconductor (TI)

Html Pages

1 2 3 4 5 6 7 8 9

Datasheet Download

Link URL