GAMEWELL-FCI

12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118

www.gamewell-fci.com

9021-60466 Rev. D page 3 of 4

Features (Continued)

Form-C Relays - Programmable - TB8

The Form-C Relays for TB8 specifications are listed below.

•

Relay 1 (factory default programmed as Alarm Relay)

•

Relay 2 (factory default programmed as fail-safe

Trouble Relay)

•

Relay 3 (factory default programmed as Supervisory

Relay).

•

Relay Contact Ratings:

- 2 amps @ 30 VDC (resistive)

- 2 amps @ 30 VAC (resistive)

Auxiliary Trouble Input – J6

The Auxiliary Trouble Input is an open collector circuit

which can be used to monitor external devices for trouble

conditions. It can be connected to the trouble bus of a

peripheral, such as a power supply, which is compatible

with open collector circuits.

Special Application Resettable Power - TB9

The Special Application Resettable Power - TB9

specifications are listed below.

•

Operating Voltage:

Nominal 24 VDC

•

Maximum Available

Current:

500 mA - appropriate for

powering 4-wire smoke

detectors (see note 1).

•

Power-limited Circuitry

For a list of compatible devices, refer to the Gamewell-FCI

Device Compatibility Document, P/N: 52195.

NOTE 1: Total current for resettable power, non-resettable

power and Output Circuits must not exceed 7.0 amps.

Special Application Resettable or Non-resettable

Power - TB9

The Special Application Resettable or Non-resettable

Power - TB9 specifications are listed below.

•

Operating Voltage:

Nominal 24 VDC

•

Maximum Available

Current:

500 mA (see Note 1)

•

Power-limited circuitry

•

Jumper selectable by JP31 for resettable or non-reset-

table power.

For a list of compatible devices, refer to the Gamewell-FCI

Device Compatibility Document, P/N: 52195.

Product Line Information

Product

Description

GF506D

Six-zone, 24 volt Pre-action Deluge Con-

trol Panel (includes backbox, power sup-

ply, technical manual, and a frame &

post operating instruction sheet) for sin-

gle and dual hazard deluge and pre-

action applications.

CAC-5X

Class A Converter Module can be used

to convert the Style B (Class B) Initiating

Device Circuits to Style D (Class A) and

Style Y (Class B) Output Circuits to Style

Z (Class A).

4XTMF

Transmitter Module provides a super-

vised output for the local energy munici-

pal box transmitter and the alarm and

trouble reverse polarity. It includes a dis-

able switch and disable trouble LED.

GFANN-80

LCD Annunciator is a remote LCD

annunciator that mimics the information

displayed on the FACP LCD display. The

recommended wire type is unshielded.

GFANN-LED

Annunciator

Module

provides

three

LEDs for each zone: Alarm, Trouble and

Supervisory. Ships with enclosure (red

and black enclosures available; refer to

P/N: DF-60241).

GFANN-RLY

Relay Module, which can be mounted

inside or outside the cabinet, provides 10

programmable Form-C relays.

DP-51050

Dress panel (red) is available as an

option. The dress panel restricts access

to the system wiring while allowing

access to the membrane switch panel.

TR-CE

Trim-ring (red) is available as an option.

The

trim-ring

allows

semi-flushing

mounting of the cabinet.

BB-17F

Battery box, holds up to two (2) 18 Amp

Hour batteries.

Battery box, houses two (2) 55 Amp

Hour batteries, red.

Refer to P/N: DF-52397.

PRN-6

UL-Listed compatible event printer. Dot-

matrix, tractor-fed paper, 120 VAC.

PRT/PK-Cable

Programming cable.

Use this cable to update the FACPs

Flash firmware. (Also it requires an

RS485 to RS232 converter).