www.austriamicrosystems.com/DC-DC_Step-Up/AS1310

Revision 1.04

5 - 15

AS1310

Datasheet - Electrical Character i s t ics

Note:

All limits are guaranteed. The parameters with min and max values are guaranteed with production tests or SQC (Statistical Quality

Control) methods.

Thermal Protection

Thermal Shutdown

10°C Hysteresis

150

°C

1. The regulator is in startup mode until this voltage is reached. Caution: Do not apply full load current until the device output > 1.75V

2. LBO goes low in startup mode as well as during normal operation if:

1) The voltage at the LBI pin is below LBI threshold.

Table 3. Electrical Characteristics

Symbol

Parameter

Conditions

Min

Typ

Max

Units