PCF2113EUSLASH2SLASHF4 datasheet(2/65 Pages) NXP

2 / 65 page

PCF2113_FAM_4

Product data sheet

Rev. 04 — 4 March 2008

2 of 65

NXP Semiconductors

PCF2113x

LCD controllers/drivers

I Multiplex rates (MUX) 1:18 (for normal operation), 1:9 (for single-line operation) and

1:2 (for Icon-only mode)

I Uses common 11 code instruction set (extended)

I Logic supply voltage range VDD1 − VSS1 = 1.8 V to 5.5 V (chip may be driven with two

battery cells)

I VLCD generator supply voltage range VDD2 − VSS2 = 2.2 V to 4.0 V

I Display supply voltage range VLCD − VSS2 = 2.2 V to 6.5 V

I Direct mode to save current consumption for Icon mode and MUX 1:9 (depending on

VDD2 and LCD liquid properties)

I CMOS compatible

I Remark: Icon mode is a way to save current. When only icons are displayed (i.e. only

the lower two rows are active), a much lower operating voltage VLCD can be used and

the switching frequency of the LCD outputs is reduced. In most applications it is

possible to use VDD as VLCD.

Applications

I Telecom equipment

I Point-of-sale terminals

I Portable instruments

Ordering information

Marking

Table 1.

Ordering information

Type number

Package

Name

Description

Version

PCF2113AU/10/F4 -

chip on ﬂexible ﬁlm carrier

PCF2113DU/F4

chip in tray

PCF2113DH/4

LQFP100

plastic low proﬁle quad ﬂat package; 100 leads;

body 14

× 14 × 1.4 mm

SOT407-1

PCF2113DU/2/F4

chip with bumps in tray

PCF2113EU/2/F4

chip with bumps in tray

PCF2113WU/2/F4

chip with bumps in tray

Table 2.

Marking codes

Type number

Marking code

PCF2113DH/4

PCF2113DH

PCF2113EU/2/F4 Datasheet(PDF) 2 Page - NXP Semiconductors

PCF2113EU/2/F4 Datasheet(HTML) 2 Page - NXP Semiconductors

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65

Datasheet Download

Link URL