TLC193, TLC393

DUAL MICROPOWER LinCMOS

™ VOLTAGE COMPARATOR

SLCS115D – DECEMBER 1986 – REVISED JANUARY 1999

14

POST OFFICE BOX 655303

TYPICAL CHARACTERISTICS

02

4

6

8

10

VDD – Supply Voltage – V

OUTPUT FALL TIME

vs

SUPPLY VOLTAGE

60

50

40

30

20

0

10

50-mV Overdrive

RL = 5.1 kΩ (pullup to VDD)

TA = 25°C

12

14

16

CL = 100 pF

15 pF

50 pF

Figure 18

APPLICATION INFORMATION

The input should always remain within the supply rails in order to avoid forward biasing the diodes in the electrostatic

discharge (ESD) protection structure. If either input exceeds this range, the device will not be damaged as long as

the input current is limited to less than 5 mA. To maintain the expected output state, the inputs must remain within

the common-mode range. For example, at 25

to assure proper device operation.

To assure reliable operation, the supply should be decoupled with a capacitor (0.1-

µF) positioned as close to the

device as possible.

The TLC393 has internal ESD-protection circuits that prevent functional failures at voltages up to 2000 V as tested

under MIL-STD-883C, Method 3015.2; however, care should be exercised in handling these devices, as exposure

to ESD may result in the degradation of the device parametric performance.

Table of Applications

FIGURE

Pulse-width-modulated motor speed controller

19

Enhanced supply supervisor

20

Two-phase nonoverlapping clock generator

21

Micropower switching regulator

28