LM193, LM293, LM293A

LM393, LM393A, LM2903, LM2903V

DUAL DIFFERENTIAL COMPARATORS

SLCS005S − JUNE 1976 − REVISED OCTOBER 2004

3

POST OFFICE BOX 655303

symbol (each comparator)

IN+

IN−

OUT

schematic (each comparator)

80-

µA

Current Regulator

80

µA

60

µA

10

µA

VCC

10

µA

OUT

GND

IN+

IN−

Epi-FET

Diodes

Resistors

Transistors

Current values shown are nominal.

COMPONENT COUNT

1

2

2

30

36 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

±36 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

−0.3 V to 36 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

36 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

20 mA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Duration of output short-circuit to ground (see Note 3)

Unlimited

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Package thermal impedance,

97

°C/W

. . . . . . . . . . . . . . . . . . . . . . . . . . . .

DGK package

172

°C/W

. . . . . . . . . . . . . . . . . . . . . . . .

P package

85

°C/W

. . . . . . . . . . . . . . . . . . . . . . . . . . . .

PS package

95

°C/W

. . . . . . . . . . . . . . . . . . . . . . . . . . .

PW package

149

°C/W

. . . . . . . . . . . . . . . . . . . . . . . . .

Package thermal impedance,

5.61

°C/W

. . . . . . . . . . . . . . . . . . . . . . . . .

JG package

14.5

°C/W

. . . . . . . . . . . . . . . . . . . . . . . . .

150

°C

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Case temperature for 60 seconds: FK package

260

°C

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Lead temperature 1,6 mm (1/16 inch) from case for 60 seconds: JG package

300

°C

. . . . . . . . . . . . . . . . . . . .

−65

°C to 150°C

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and

functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not

implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

NOTES:

1. All voltage values, except differential voltages, are with respect to GND.

2. Differential voltages are at IN+, with respect to IN−.

3. Short circuits from outputs to VCC can cause excessive heating and eventual destruction.

4. Maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any allowable

ambient temperature is PD = (TJ(max) − TA)/θJA. Operating at the absolute maximum TJ of 150°C can affect reliability.

5. The package thermal impedance is calculated in accordance with JESD 51-7.

6. Maximum power dissipation is a function of TJ(max), θJC, and TC. The maximum allowable power dissipation at any allowable case

temperature is PD = (TJ(max) − TC)/θJC. Operating at the absolute maximum TJ of 150°C can affect reliability.

7. The package thermal impedance is calculated in accordance with MIL-STD-883.