| Electronic Components Datasheet Search |
|
HD6432138SW Datasheet(PDF) 676 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
HD6432138SW Datasheet(HTML) 676 Page - Renesas Technology Corp |
|
676 / 1061 page ![]() Section 21 ROM (Mask ROM Version, H8S/2138 F-ZTAT, H8S/2134 F-ZTAT, and H8S/2132 F-ZTAT) Rev. 4.00 Jun 06, 2006 page 622 of 1004 REJ09B0301-0400 Do not set or clear the SWE bit during program execution in flash memory: Clear the SWE bit before executing a program or reading data in flash memory. When the SWE bit is set, data in flash memory can be rewritten, but flash memory should only be accessed for verify operations (verification during programming/erasing). Do not use interrupts while flash memory is being programmed or erased: All interrupt requests, including NMI, should be disabled to give priority to program/erase operations. Do not perform additional programming. Erase the memory before reprogramming. In on- board programming, perform only one programming operation on a 32-byte programming unit block. In programmer mode, too, perform only one programming operation on a 128-byte programming unit block. Programming should be carried out with the entire programming unit block erased. Before programming, check that the chip is correctly mounted in the PROM programmer. Overcurrent damage to the device can result if the index marks on the PROM programmer socket, socket adapter, and chip are not correctly aligned. Do not touch the socket adapter or chip during programming. Touching either of these can cause contact faults and write errors. 21.12 Note on Switching from F-ZTAT Version to Mask ROM Version The mask ROM version dose not have the internal registers for flash memory control that are provided in the F-ZTAT version. Table 21.22 lists the registers that are present in the F-ZTAT version but not in the mask ROM version. If a register listed in table 21.22 is read in the mask ROM version, an undefined value will be returned. Therefore, if application software developed on the F-ZTAT version is switched to a mask ROM version product, it must be modified to ensure that the registers in table 21.22 have no effect. Table 21.22 Registers Present in F-ZTAT Version but Absent in Mask ROM Version Register Abbreviation Address Flash memory control register 1 FLMCR1 H'FF80 Flash memory control register 2 FLMCR2 H'FF81 Erase block register 1 EBR1 H'FF82 Erase block register 2 EBR2 H'FF83 |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |