Data Sheet

HUSB251

©2023 Hynetek Semiconductor Co., Ltd. All rights reserved.

Page 21 of 21

IMPORTANT NOTICE

Hynetek Semiconductor Co., Ltd. and its subsidiaries (Hynetek) reserve the right to make corrections, enhancements,

improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any

product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should

verify that such information is current and complete. All semiconductor products (also referred to herein as “components”) are sold

subject to Hynetek’s terms and conditions of sale supplied at the time of order acknowledgment.

Hynetek warrants performance of its components to the specifications applicable at the time of sale, in accordance with the

warranty in Hynetek’s terms and conditions of sale of semiconductor products. Testing and other quality control techniques are

used to the extent Hynetek deems necessary to support this warranty. Except where mandated by applicable law, testing of all

parameters of each component is not necessarily performed.

Hynetek assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their

products and applications using Hynetek components. To minimize the risks associated with Buyers’ products and applications,

Buyers should provide adequate design and operating safeguards.

Hynetek does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright,

mask work right, or other intellectual property right relating to any combination, machine, or process in which Hynetek components

or services are used. Information published by Hynetek regarding third-party products or services does not constitute a license to

use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third

party under the patents or other intellectual property of the third party, or a license from Hynetek under the patents or other

intellectual property of Hynetek.

Reproduction of significant portions of Hynetek information in Hynetek data books or data sheets is permissible only if reproduction

is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Hynetek is not

responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions.

Resale of Hynetek components or services with statements different from or beyond the parameters stated by Hynetek for that

component or service voids all express and any implied warranties for the associated Hynetek component or service and is an

unfair and deceptive business practice.

Hynetek is not responsible or liable for any such statements.

Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related

requirements concerning its products, and any use of Hynetek components in its applications, notwithstanding any applications-

related information or support that may be provided by Hynetek. Buyer represents and agrees that it has all the necessary

expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their

consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully

indemnify Hynetek and its representatives against any damages arising out of the use of any Hynetek components in safety-critical

applications.

In some cases, Hynetek components may be promoted specifically to facilitate safety-related applications. With such components,

Hynetek’s goal is to help enable customers to design and create their own end-product solutions that meet applicable functional

safety standards and requirements. Nonetheless, such components are subject to these terms.

No Hynetek components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized

officers of the parties have executed a special agreement specifically governing such use.

Only those Hynetek components which Hynetek has specifically designated as military grade or “enhanced plastic” are designed

and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or

aerospace use of Hynetek components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely

responsible for compliance with all legal and regulatory requirements in connection with such use.

Hynetek has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any

case of use of non-designated products, Hynetek will not be responsible for any failure to meet ISO/TS16949.

Please refer to below URL for other products and solutions of Hynetek Semiconductor Co., Ltd.

©2023 Hynetek Semiconductor Co., Ltd. All rights reserved.

Trademarks and registered trademarks are the property of their respective owners.

www.hynetek.com