15

2

STM17 Dimensions

19.05

2X M3

15

2

24

38.6

67±1

13*

42.3 MAX

31

31

43.5

4-M3Depth 4.5

42.3 MAX

31

31

43.5

4-M3Depth 4.5

81±1

55.8

42.4

2

24

Ø 22

4.50 Flat

15

Ø 5

60.8

STM17R

STM17S/Q/C

Power Supplies

Applied Motion offers three matched power supplies for use with the

STM drives.

•

PS150A24 ... 24 VDC, 150 Watt for use with all STM drives.

•

PS320A48 ... 48 VDC, 320 Watt for use with all STM drives.

•

PS50A24 ... 24 VDC, 50 Watt for use with STM17 drives.

These power supplies have current overload capability making them

ideal for use with stepper drives.

USB to RS-232/485 Adapter

For users without a serial port and/or wishing to take advantage

of the benefits of an RS-485 network, Applied Motion offers an

adapter (part number 8500-003) that will plug into a USB port and

communicate to RS-232 and RS-485 networks.

RC-050 Regeneration Clamp

The RC-050 regeneration clamp is for use where regeneration from

the motor may be excessive for the power supply. In these cases

the RC-050 is connected between the drive and power supply and

absorbs regenerated energy.

Integrated Stepper

STM17

• NEMA 17 frame size

• Torque: up to 68 oz-in

• Input voltage: 12-48 VDC

Dimensions in mm, not to scale

*rear shaft is only present on –ND and –NE versions

3004-189 Serial Programming Cable

The 3004-189 serial programming cable is included with all STM23

and STM24 products (all but R models) with the “A” communication

option, and is used for setup and programming. This cable can

also be used in streaming serial command (SCL) applications as a

permanent connection between the drive and the host device’s RS-

232 port.

3004-259 Serial Programming Cable

The 3004-259 serial programming cable is included with all STM17

products (all but R models) with the “A” communication option, and

is used for setup and programming. This cable can also be used

in streaming serial command (SCL) applications as a permanent

connection between the drive and the host device’s RS-232 port.