I-84

Digital Controller

E5CK

Precautions

I Period and Scope of Guarantee

Unit with Standard Specifications

Scope of Guarantee

Should the Unit malfunction during the guarantee period, OMRON

shall repair the Unit or replace any parts of the Unit at the expense of

OMRON.

The above does not apply in the following cases.

1. Any malfunction of the Unit due to the incorrect use or improper

handling of the Unit.

2. Any malfunction of the Unit not originating from the Unit.

3. Any malfunction of the Unit due to a modification of the Unit or

repairs to the Unit carried out by any person not authorized by

OMRON.

4. Any malfunction of the Unit due to any natural disaster.

OMRON shall not be responsible for any damage or loss induced by

any malfunction of the Unit.

Three-year Guarantee

Period of Guarantee

The guarantee period of the Unit is three years starting from the date

the Unit is shipped from the factory.

Scope of Guarantee

The Unit is guaranteed under the following operating conditions.

1. Average Operating Temperature (see note):

−10°C to 50°C

2. Mounting Method: Standard mounting

Note: Average Operating Temperature

Refer to the process temperature of the Unit mounted to a con-

trol panel and connected to peripheral devices on condition that

the Unit is in stable operation, sensor input type K is selected

for the Unit, the positive and negative thermocouple input ter-

minals of the Unit are short-circuited, and the ambient temper-

ature is stable.

Should the Unit malfunction during the guarantee period, OMRON

shall repair the Unit or replace any parts of the Unit at the expense of

OMRON.

The above does not apply in the following cases.

1. Any malfunction of the Unit due to the incorrect use or improper

handling of the Unit.

2. Any malfunction of the Unit not originating from the Unit.

3. Any malfunction of the Unit due to a modification of the Unit or

repairs to the Unit carried out by any person not authorized by

OMRON.

4. Any malfunction of the Unit due to any natural disaster.

OMRON shall not be responsible for any damage or loss induced by

any malfunction of the Unit.

Top

Bottom

In the interest of product improvement, specifications are subject to change without notice.

ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.

To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.

Cat. No. H079-E1-05