| Electronic Components Datasheet Search |
|
DOM44KR096 Datasheet(PDF) 16 Page - Hanbit Electronics Co.,Ltd |
|
|
|||||||||||||||||||||||||||||
DOM44KR096 Datasheet(HTML) 16 Page - Hanbit Electronics Co.,Ltd |
|
16 / 30 page ![]() HANBit HFDOM44KRxxx URL:www.hbe.co.kr 16 / 30 HANBit Electronics Co., Ltd. Rev. 1.0 (December, 2004) This command writes the desired head and cylinder of the selected drive with a vendor unique data pattern (typically FFh or 00h). To remain host backward compatible, the CompactFlash Storage Card expects a sector buffer of data from the host to follow the command with the same protocol as the Write Sector(s) command although the information in the buffer is not used by the CompactFlash Storage Card. If LBA=1 then the number of sectors to format is taken from the SecCnt register (0=256). The use of this command is not recommended. Identify Drive - ECh Bit-> 7 6 5 4 3 2 1 0 Command(7) ECh C/D/H(6) X X X Drive X Cyl High(5) X Cyl Low(4) X Sec Num(3) X Sec Cnt(2) X Feature(1) X Identify Drive The Identify Drive command enables the host to receive parameter information from the CompactFlash Storage Card. This command has the same protocol as the Read Sector(s) command. The parameter words in the buffer have the arrangement and meanings defined in Table . All reserved bits or words are zero. Table 40 is the definition for each field in the Identify Drive Information. Table: Identify Drive Information Word Address Default Value Total Bytes Data Field Type Information 0 848Ah 2 General configuration – signature for the CompactFlash Storage Card 1 xxxxh 2 Default number of cylinders 2 0000h 2 Reserved 3 00xxh 2 Default number of heads 4 xxxxh 2 Number of unformatted bytes per track 5 xxxxh 2 Number of unformatted bytes per sector 6 xxxxh 2 Default number of sectors per track 7-8 xxxxh 4 Number of sectors per card (Word 7 = MSW , word 8 = LSW) 9 xxxxh 2 Vendor Unique 10-19 aaaa 20 Serial number in ASCII (Right Justified ) 20 xxxxh 2 Buffer type 21 xxxxh 2 Buffer size in 512 byte increments 22 0004h 2 # of ECC bytes passed on Read/Write Long Commands 23-26 aaaa 8 Firmware revision in ASCII. Big Endian Byte Order in Word 27-46 aaaa 40 Model number in ASCII (Left Justified) Big Endian Byte Order in Word 47 xxxxh 2 Maximum number of sectors on Read/Write Mutliple command 48 0000h 2 Double Word not supported |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |