ADPA7009-2ACEZ-R7 datasheet(5/24 Pages) AD

5 / 24 page

Data Sheet

ADPA7009-2

ABSOLUTE MAXIMUM RATINGS

analog.com

Rev. 0 | 5 of 24

Table 4. Absolute Maximum Ratings

Parameter

Rating

VDD

6.0 V

VGG

−1.6 V to 0 V

RF Input Power (RFIN)

20 dBm

Continuous Power Dissipation (PDISS), TCASE = 85°C

(Derate 13.6 mW/°C above 85°C)

6.6 W

Temperature

Maximum Channel

175°C

Quiescent Channel (TCASE = 85°C, VDD = 5 V) IDQ

= 850 mA, PIN = Off

143°C

Storage Range

−65°C to +150°C

Operating Range

−40°C to +85°C

Stresses at or above those listed under Absolute Maximum Ratings

may cause permanent damage to the product. This is a stress

rating only; functional operation of the product at these or any other

conditions above those indicated in the operational section of this

specification is not implied. Operation beyond the maximum operat-

ing conditions for extended periods may affect product reliability.

THERMAL RESISTANCE

Thermal performance is directly linked to system design and op-

erating environment. Careful attention to PCB thermal design is

required.

θJC is the channel-to-case thermal resistance (channel to exposed

metal ground pad on the underside of the device).

Table 5. Thermal Resistance

Package Type

θJC1

Unit

CE-24-2

13.6

°C/W

1 θJC was determined by simulation under the following conditions: the heat

transfer is due solely to thermal conduction from the channel, through the

ground pad, to the PCB, and the ground pad is held constant at the operating

temperature of 85°C.

ELECTROSTATIC DISCHARGE (ESD) RATINGS

The following ESD information is provided for handling of ESD-sen-

sitive devices in an ESD-protected area only.

Human Body Model (HBM) per ANSI/ESDA/JEDEC JS-001.

ESD Ratings for ADPA7009-2

Table 6. ADPA7009-2, 24-Terminal LGA_CAV

ESD Model

Withstand Threshold (V)

Class

HBM

±500

ESD CAUTION

ESD (electrostatic discharge) sensitive device. Charged devi-

ces and circuit boards can discharge without detection. Although

this product features patented or proprietary protection circuitry,

damage may occur on devices subjected to high energy ESD.

Therefore, proper ESD precautions should be taken to avoid

performance degradation or loss of functionality.

ADPA7009-2ACEZ-R7 Datasheet(PDF) 5 Page - Analog Devices

ADPA7009-2ACEZ-R7 Datasheet(HTML) 5 Page - Analog Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

Datasheet Download

Link URL