V12TCJ-R Price, Distributor, Stock

Key Specifications, Connector Series In: SMA, Connector Gender In: Female, Minimum Frequency: 10 MHz, Maximum Frequency: 500 MHz, Number of Output Ports: 4 Port, Impedance: 50 Ohm, Maximum Input Power: 10 Watt. 4 way SMA Power Divider from 10 MHz to 500 MHz Rated at 10 Watts., The PE20DV1211 4-way SMA power divider (also known as a SMA coaxial power splitter) is rated for a minimum frequency of 10 MHz and a maximum frequency of 500 MHz. This Pasternack 4 port power divider / coaxial splitter has a 50 Ohm impedance and a maximum input power of 10 Watts. Our SMA coaxial RF splitter / divider has a female SMA input and 4 female SMA output ports. This RF power divider allows the splitting of a single signal into multiple signals with equal magnitude and phase. Pasternack’s PE20DV1211 power splitter comes with an aluminum housing and can handle maximum reverse power up to 1 Watts. This SMA connector power divider has a 0.30 dB maximum amplitude balance. Our 50 Ohm radio frequency power divider is built to operate across a temperature range of -40 deg C to 85 deg C. This 500 MHz RF power divider has 1 degrees and 2 degrees typical and maximum phase balance, respectively. This 4-way SMA RF power divider from Pasternack has a maximum insertion loss of 1.5 dB. The maximum input VSWR of this SMA splitter / divider is 1.5:1 and the minimum isolation is 20 dB. Our 4 port SMA power divider is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This 4-way SMA female coaxial RF power divider splitter can be bought and shipped worldwide the same-day as with Pasternack's other in-stock RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the perfect RF power divider for your requirements.

1 : $451.99
10 : $433.91
25 : $415.83
100 : $397.75

PE20DV1212

Pasternack Enterprises

Key Specifications, Connector Series In: SMA, Connector Gender In: Female, Minimum Frequency: 500 MHz, Maximum Frequency: 1 GHz, Number of Output Ports: 8 Port, Impedance: 50 Ohm, Maximum Input Power: 30 Watt. 8 way SMA Power Divider from 500 MHz to 1 GHz Rated at 30 Watts., The PE20DV1212 8-way SMA power divider (also known as a SMA coaxial power splitter) is rated for a minimum frequency of 500 MHz and a maximum frequency of 1 GHz. This Pasternack 8 port power divider / coaxial splitter has a 50 Ohm impedance and a maximum input power of 30 Watts. Our SMA coaxial RF splitter / divider has a female SMA input and 8 female SMA output ports. This RF power divider allows the splitting of a single signal into multiple signals with equal magnitude and phase. This SMA connector power divider has a 0.45 dB maximum amplitude balance. Our 50 Ohm radio frequency power divider is built to operate across a temperature range of -40 deg C to 85 deg C. This 1 GHz RF power divider has 3 degrees and 5 degrees typical and maximum phase balance, respectively. This 8-way SMA RF power divider from Pasternack has a maximum insertion loss of 0.7 dB. The maximum input VSWR of this SMA splitter / divider is 1.35:1 and the minimum isolation is 20 dB. Our 8 port SMA power divider is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This 8-way SMA female coaxial RF power divider splitter can be bought and shipped worldwide the same-day as with Pasternack's other in-stock RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the perfect RF power divider for your requirements.

1 : $955.0
5 : $916.8
10 : $878.6
25 : $840.4

PE20DV1209

Pasternack Enterprises

Key Specifications, Connector Series In: N, Connector Gender In: Female, Minimum Frequency: 300 MHz, Maximum Frequency: 500 MHz, Number of Output Ports: 4 Port, Impedance: 50 Ohm, Maximum Input Power: 50 Watt. 4 way N Power Divider from 300 MHz to 500 MHz Rated at 50 Watts., The PE20DV1209 4-way type N power divider (also known as a type N coaxial power splitter) is rated for a minimum frequency of 300 MHz and a maximum frequency of 500 MHz. This Pasternack 4 port power divider / coaxial splitter has a 50 Ohm impedance and a maximum input power of 50 Watts. Our type N coaxial RF splitter / divider has a female type N input and 4 female type N output ports. This RF power divider allows the splitting of a single signal into multiple signals with equal magnitude and phase. Pasternack’s PE20DV1209 power splitter comes with an aluminum housing and can handle maximum reverse power up to 5 Watts. This type N connector power divider has a 0.30 dB maximum amplitude balance. Our 50 Ohm radio frequency power divider is built to operate across a temperature range of -40 deg C to 85 deg C. This 500 MHz RF power divider has 2 degrees and 4 degrees typical and maximum phase balance, respectively. This 4-way type N RF power divider from Pasternack has a maximum insertion loss of 0.8 dB. The maximum input VSWR of this type N splitter / divider is 1.35:1 and the minimum isolation is 20 dB. Our 4 port type N power divider is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This 4-way type N female coaxial RF power divider splitter can be bought and shipped worldwide the same-day as with Pasternack's other in-stock RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the perfect RF power divider for your requirements.

1 : $735.0
5 : $705.6
10 : $676.2
25 : $646.8

PE20DV1203

Pasternack Enterprises

Key Specifications, Connector Series In: SMA, Connector Gender In: Female, Minimum Frequency: 220 MHz, Maximum Frequency: 450 MHz, Number of Output Ports: 2 Port, Impedance: 50 Ohm, Maximum Input Power: 50 Watt. 2 way SMA Power Divider from 220 MHz to 450 MHz Rated at 50 Watts., The PE20DV1203 2-way SMA power divider (also known as a SMA coaxial power splitter) is rated for a minimum frequency of 220 MHz and a maximum frequency of 450 MHz. This Pasternack 2 port power divider / coaxial splitter has a 50 Ohm impedance and a maximum input power of 50 Watts. Our SMA coaxial RF splitter / divider has a female SMA input and 2 female SMA output ports. This RF power divider allows the splitting of a single signal into multiple signals with equal magnitude and phase. Pasternack’s PE20DV1203 power splitter comes with an aluminum housing and can handle maximum reverse power up to 5 Watts. This SMA connector power divider has a 0.20 dB maximum amplitude balance. Our 50 Ohm radio frequency power divider is built to operate across a temperature range of -40 deg C to 85 deg C. This 450 MHz RF power divider has 1 degrees and 2 degrees typical and maximum phase balance, respectively. This 2-way SMA RF power divider from Pasternack has a maximum insertion loss of 0.3 dB. The maximum input VSWR of this SMA splitter / divider is 1.3:1 and the minimum isolation is 20 dB. Our 2 port SMA power divider is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This 2-way SMA female coaxial RF power divider splitter can be bought and shipped worldwide the same-day as with Pasternack's other in-stock RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the perfect RF power divider for your requirements.

1 : $435.6
10 : $418.18
25 : $400.75
100 : $383.33

PE20DV1205

Pasternack Enterprises

Key Specifications, Connector Series In: N, Connector Gender In: Female, Minimum Frequency: 300 MHz, Maximum Frequency: 500 MHz, Number of Output Ports: 3 Port, Impedance: 50 Ohm, Maximum Input Power: 50 Watt. 3 way N Power Divider from 300 MHz to 500 MHz Rated at 50 Watts., The PE20DV1205 3-way type N power divider (also known as a type N coaxial power splitter) is rated for a minimum frequency of 300 MHz and a maximum frequency of 500 MHz. This Pasternack 3 port power divider / coaxial splitter has a 50 Ohm impedance and a maximum input power of 50 Watts. Our type N coaxial RF splitter / divider has a female type N input and 3 female type N output ports. This RF power divider allows the splitting of a single signal into multiple signals with equal magnitude and phase. Pasternack’s PE20DV1205 power splitter comes with an aluminum housing and can handle maximum reverse power up to 2 Watts. This type N connector power divider has a 0.30 dB maximum amplitude balance. Our 50 Ohm radio frequency power divider is built to operate across a temperature range of -40 deg C to 85 deg C. This 500 MHz RF power divider has 3 degrees and 5 degrees typical and maximum phase balance, respectively. This 3-way type N RF power divider from Pasternack has a maximum insertion loss of 0.5 dB. The maximum input VSWR of this type N splitter / divider is 1.35:1 and the minimum isolation is 20 dB. Our 3 port type N power divider is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This 3-way type N female coaxial RF power divider splitter can be bought and shipped worldwide the same-day as with Pasternack's other in-stock RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the perfect RF power divider for your requirements.

1 : $514.8
5 : $494.21
10 : $473.62
25 : $453.02

PE20DV1201

Pasternack Enterprises

Key Specifications, Connector Series In: N, Connector Gender In: Female, Minimum Frequency: 300 MHz, Maximum Frequency: 500 MHz, Number of Output Ports: 2 Port, Impedance: 50 Ohm, Maximum Input Power: 50 Watt. 2 way N Power Divider from 300 MHz to 500 MHz Rated at 50 Watts., The PE20DV1201 2-way type N power divider (also known as a type N coaxial power splitter) is rated for a minimum frequency of 300 MHz and a maximum frequency of 500 MHz. This Pasternack 2 port power divider / coaxial splitter has a 50 Ohm impedance and a maximum input power of 50 Watts. Our type N coaxial RF splitter / divider has a female type N input and 2 female type N output ports. This RF power divider allows the splitting of a single signal into multiple signals with equal magnitude and phase. Pasternack’s PE20DV1201 power splitter comes with an aluminum housing and can handle maximum reverse power up to 5 Watts. This type N connector power divider has a 0.30 dB maximum amplitude balance. Our 50 Ohm radio frequency power divider is built to operate across a temperature range of -40 deg C to 85 deg C. This 500 MHz RF power divider has 1 degrees and 3 degrees typical and maximum phase balance, respectively. This 2-way type N RF power divider from Pasternack has a maximum insertion loss of 0.5 dB. The maximum input VSWR of this type N splitter / divider is 1.3:1 and the minimum isolation is 20 dB. Our 2 port type N power divider is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This 2-way type N female coaxial RF power divider splitter can be bought and shipped worldwide the same-day as with Pasternack's other in-stock RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the perfect RF power divider for your requirements.

1 : $471.6
10 : $452.74
25 : $433.87
100 : $415.01

PE20DV1283

Pasternack Enterprises

Key Specifications, Connector Series In: N, Connector Gender In: Female, Minimum Frequency: 375 MHz, Maximum Frequency: 6 GHz, Number of Output Ports: 8 Port, Impedance: 50 Ohm, Maximum Input Power: 30 Watt. 8 Way N Female Input Connector Power Divider, From 0.375 GHz to 6 GHz, Rated at 30 Watts. The PE20DV1283 8-way N-type power divider, also known as a type N coaxial power splitter, is rated for a minimum frequency of 375 MHz and a maximum frequency of 6 GHz. This Pasternack 8 port N-type power divider/coaxial splitter has a 50 Ohm impedance and a maximum input power (CW) of 30 Watts. Our N-type connectors power splitter/divider has a female input and 8-way female output ports. This RF power divider allows the splitting of a single signal into multiple signals with equal magnitude and phase. Make your online purchase right now to take advantage of our same-day shipping. Pasternack’s PE20DV1283 power splitter has an aluminum housing. This N-type connector power divider has a 0.4 dB maximum amplitude balance. This 6 GHz power divider has 6 degrees maximum phase balance. Additional power divider specifications and dimensions can be found on its PDF specification datasheet and CAD drawings above. This 8-way type N RF power divider from Pasternack has a maximum insertion loss of 3 dB. The maximum input VSWR of this N-type splitter/divider is 1.65:1 and the minimum isolation is 14 dB. Our radio frequency power divider is built to operate across a temperature range of -40 deg C to 85 deg C. Our 8 port N-type power divider is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This 8-way N-type female coaxial RF power divider splitter can be bought and shipped worldwide on the same-day as with Pasternack’s other in-stock RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the perfect power divider for your requirements.

1 : $1,980.0
5 : $1,940.4
10 : $1,900.8
25 : $1,861.2

PE20DV1281

Pasternack Enterprises

Key Specifications, Connector Series In: SMA, Connector Gender In: Female, Minimum Frequency: 2 GHz, Maximum Frequency: 8 GHz, Number of Output Ports: 8 Port, Impedance: 50 Ohm, Maximum Input Power: 30 Watt. 8 Way SMA Female Input Connector Power Divider, From 2 GHz to 8 GHz, Rated at 30 Watts. The PE20DV1281 8-way SMA-type power divider, also known as a type SMA coaxial power splitter, is rated for a minimum frequency of 2 GHz and a maximum frequency of 8 GHz. This Pasternack 8 port SMA-type power divider/coaxial splitter has a 50 Ohm impedance and a maximum input power (CW) of 30 Watts. Our SMA-type connectors power splitter/divider has a female input and 8-way female output ports. This RF power divider allows the splitting of a single signal into multiple signals with equal magnitude and phase. Make your online purchase right now to take advantage of our same-day shipping. Pasternack’s PE20DV1281 power splitter has an aluminum housing. This SMA-type connector power divider has a 0.5 dB maximum amplitude balance. This 8 GHz power divider has 4 degrees and 5 degrees typical and maximum phase balance, respectively. Additional power divider specifications and dimensions can be found on its PDF specification datasheet and CAD drawings above. This 8-way type SMA RF power divider from Pasternack has a maximum insertion loss of 1.5 dB. The maximum input VSWR of this SMA-type splitter/divider is 1.6:1 and the minimum isolation is 18 dB. Our radio frequency power divider is built to operate across a temperature range of -40 deg C to 85 deg C. Our 8 port SMA-type power divider is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This 8-way SMA-type female coaxial RF power divider splitter can be bought and shipped worldwide on the same-day as with Pasternack’s other in-stock RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the perfect power divider for your requirements.

1 : $1,320.0
5 : $1,293.6
10 : $1,267.2
25 : $1,240.8

PE20DV1273

Pasternack Enterprises

Key Specifications, Connector Series In: N, Connector Gender In: Female, Minimum Frequency: 2 GHz, Maximum Frequency: 18 GHz, Number of Output Ports: 4 Port, Impedance: 50 Ohm, Maximum Input Power: 30 Watt. 4 Way N Female Input Connector Power Divider, From 2 GHz to 18 GHz, Rated at 30 Watts. The PE20DV1273 4-way N-type power divider, also known as a type N coaxial power splitter, is rated for a minimum frequency of 2 GHz and a maximum frequency of 18 GHz. This Pasternack 4 port N-type power divider/coaxial splitter has a 50 Ohm impedance and a maximum input power (CW) of 30 Watts. Our N-type connectors power splitter/divider has a female input and 4-way female output ports. This RF power divider allows the splitting of a single signal into multiple signals with equal magnitude and phase. Make your online purchase right now to take advantage of our same-day shipping. Pasternack’s PE20DV1273 power splitter has an aluminum housing. This N-type connector power divider has a 0.4 dB maximum amplitude balance. This 18 GHz power divider has 5 degrees and 6 degrees typical and maximum phase balance, respectively. Additional power divider specifications and dimensions can be found on its PDF specification datasheet and CAD drawings above. This 4-way type N RF power divider from Pasternack has a maximum insertion loss of 2.2 dB. The maximum input VSWR of this N-type splitter/divider is 1.65:1 and the minimum isolation is 16 dB. Our radio frequency power divider is built to operate across a temperature range of -40 deg C to 85 deg C. Our 4 port N-type power divider is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This 4-way N-type female coaxial RF power divider splitter can be bought and shipped worldwide on the same-day as with Pasternack’s other in-stock RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the perfect power divider for your requirements.

1 : $2,200.0
5 : $2,156.0
10 : $2,112.0
25 : $2,068.0

PE20DV1272

Pasternack Enterprises

Key Specifications, Connector Series In: N, Connector Gender In: Female, Minimum Frequency: 2 GHz, Maximum Frequency: 8 GHz, Number of Output Ports: 4 Port, Impedance: 50 Ohm, Maximum Input Power: 30 Watt. 4 Way N Female Input Connector Power Divider, From 2 GHz to 8 GHz, Rated at 30 Watts. The PE20DV1272 4-way N-type power divider, also known as a type N coaxial power splitter, is rated for a minimum frequency of 2 GHz and a maximum frequency of 8 GHz. This Pasternack 4 port N-type power divider/coaxial splitter has a 50 Ohm impedance and a maximum input power (CW) of 30 Watts. Our N-type connectors power splitter/divider has a female input and 4-way female output ports. This RF power divider allows the splitting of a single signal into multiple signals with equal magnitude and phase. Make your online purchase right now to take advantage of our same-day shipping. Pasternack’s PE20DV1272 power splitter has an aluminum housing. This N-type connector power divider has a 0.3 dB maximum amplitude balance. This 8 GHz power divider has 3 degrees and 4 degrees typical and maximum phase balance, respectively. Additional power divider specifications and dimensions can be found on its PDF specification datasheet and CAD drawings above. This 4-way type N RF power divider from Pasternack has a maximum insertion loss of 1.2 dB. The maximum input VSWR of this N-type splitter/divider is 1.4:1 and the minimum isolation is 20 dB. Our radio frequency power divider is built to operate across a temperature range of -40 deg C to 85 deg C. Our 4 port N-type power divider is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This 4-way N-type female coaxial RF power divider splitter can be bought and shipped worldwide on the same-day as with Pasternack’s other in-stock RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the perfect power divider for your requirements.

1 : $990.0
5 : $970.2
10 : $950.4
25 : $930.6

PE20DV1271

Pasternack Enterprises

Key Specifications, Connector Series In: N, Connector Gender In: Female, Minimum Frequency: 4 GHz, Maximum Frequency: 18 GHz, Number of Output Ports: 4 Port, Impedance: 50 Ohm, Maximum Input Power: 30 Watt. 4 Way N Female Input Connector Power Divider, From 4 GHz to 18 GHz, Rated at 30 Watts. The PE20DV1271 4-way N-type power divider, also known as a type N coaxial power splitter, is rated for a minimum frequency of 4 GHz and a maximum frequency of 18 GHz. This Pasternack 4 port N-type power divider/coaxial splitter has a 50 Ohm impedance and a maximum input power (CW) of 30 Watts. Our N-type connectors power splitter/divider has a female input and 4-way female output ports. This RF power divider allows the splitting of a single signal into multiple signals with equal magnitude and phase. Make your online purchase right now to take advantage of our same-day shipping. Pasternack’s PE20DV1271 power splitter has an aluminum housing. This N-type connector power divider has a 0.4 dB maximum amplitude balance. This 18 GHz power divider has 4 degrees and 6 degrees typical and maximum phase balance, respectively. Additional power divider specifications and dimensions can be found on its PDF specification datasheet and CAD drawings above. This 4-way type N RF power divider from Pasternack has a maximum insertion loss of 1.2 dB. The maximum input VSWR of this N-type splitter/divider is 1.6:1 and the minimum isolation is 18 dB. Our radio frequency power divider is built to operate across a temperature range of -40 deg C to 85 deg C. Our 4 port N-type power divider is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This 4-way N-type female coaxial RF power divider splitter can be bought and shipped worldwide on the same-day as with Pasternack’s other in-stock RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the perfect power divider for your requirements.

1 : $2,090.0
5 : $2,048.2
10 : $2,006.4
25 : $1,964.6

PE20DV1263

Pasternack Enterprises

Key Specifications, Connector Series In: 2.4mm, Connector Gender In: Female, Minimum Frequency: 8 GHz, Maximum Frequency: 54 GHz, Number of Output Ports: 2 Port, Impedance: 50 Ohm, Maximum Input Power: 20 Watt. 2 Way 2.4mm Female Input Connector Power Divider, From 8 GHz to 54 GHz, Rated at 20 Watts. The PE20DV1263 2-way 2.4mm-type power divider, also known as a type 2.4mm coaxial power splitter, is rated for a minimum frequency of 8 GHz and a maximum frequency of 54 GHz. This Pasternack 2 port 2.4mm-type power divider/coaxial splitter has a 50 Ohm impedance and a maximum input power (CW) of 20 Watts. Our 2.4mm-type connectors power splitter/divider has a female input and 2-way female output ports. This RF power divider allows the splitting of a single signal into multiple signals with equal magnitude and phase. Make your online purchase right now to take advantage of our same-day shipping. Pasternack’s PE20DV1263 power splitter has an aluminum housing. This 2.4mm-type connector power divider has a 0.3 dB maximum amplitude balance. This 54 GHz power divider has 4 degrees and 6 degrees typical and maximum phase balance, respectively. Additional power divider specifications and dimensions can be found on its PDF specification datasheet and CAD drawings above. This 2-way type 2.4mm RF power divider from Pasternack has a maximum insertion loss of 1.3 dB. The maximum input VSWR of this 2.4mm-type splitter/divider is 1.8:1 and the minimum isolation is 15 dB. Our radio frequency power divider is built to operate across a temperature range of -40 deg C to 85 deg C. Our 2 port 2.4mm-type power divider is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This 2-way 2.4mm-type female coaxial RF power divider splitter can be bought and shipped worldwide on the same-day as with Pasternack’s other in-stock RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the perfect power divider for your requirements.

1 : $2,090.0
5 : $2,048.2
10 : $2,006.4
25 : $1,964.6

PE20DV1280

Pasternack Enterprises

Key Specifications, Connector Series In: N, Connector Gender In: Female, Minimum Frequency: 698 MHz, Maximum Frequency: 2.7 GHz, Number of Output Ports: 8 Port, Impedance: 50 Ohm, Maximum Input Power: 50 Watt. 8 Way N Female Input Connector Power Divider, From 0.698 GHz to 2.7 GHz, Rated at 50 Watts. The PE20DV1280 8-way N-type power divider, also known as a type N coaxial power splitter, is rated for a minimum frequency of 698 MHz and a maximum frequency of 2.7 GHz. This Pasternack 8 port N-type power divider/coaxial splitter has a 50 Ohm impedance and a maximum input power (CW) of 50 Watts. Our N-type connectors power splitter/divider has a female input and 8-way female output ports. This RF power divider allows the splitting of a single signal into multiple signals with equal magnitude and phase. Make your online purchase right now to take advantage of our same-day shipping. Pasternack’s PE20DV1280 power splitter has an aluminum housing. This N-type connector power divider has a 0.5 dB maximum amplitude balance. This 2.7 GHz power divider has 5 degrees maximum phase balance. Additional power divider specifications and dimensions can be found on its PDF specification datasheet and CAD drawings above. This 8-way type N RF power divider from Pasternack has a maximum insertion loss of 1 dB. The maximum input VSWR of this N-type splitter/divider is 1.5:1 and the minimum isolation is 18 dB. Our radio frequency power divider is built to operate across a temperature range of -40 deg C to 85 deg C. Our 8 port N-type power divider is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This 8-way N-type female coaxial RF power divider splitter can be bought and shipped worldwide on the same-day as with Pasternack’s other in-stock RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the perfect power divider for your requirements.

1 : $1,420.0
5 : $1,391.6
10 : $1,363.2
25 : $1,334.8

PE20DV1285

Pasternack Enterprises

Key Specifications, Connector Series In: 2.92mm, Connector Gender In: Female, Minimum Frequency: 26 GHz, Maximum Frequency: 40 GHz, Number of Output Ports: 8 Port, Impedance: 50 Ohm, Maximum Input Power: 10 Watt. 8 Way 2.92mm Female Input Connector Power Divider, From 26 GHz to 40 GHz, Rated at 10 Watts. The PE20DV1285 8-way 2.92mm-type power divider, also known as a type 2.92mm coaxial power splitter, is rated for a minimum frequency of 26 GHz and a maximum frequency of 40 GHz. This Pasternack 8 port 2.92mm-type power divider/coaxial splitter has a 50 Ohm impedance and a maximum input power (CW) of 10 Watts. Our 2.92mm-type connectors power splitter/divider has a female input and 8-way female output ports. This RF power divider allows the splitting of a single signal into multiple signals with equal magnitude and phase. Make your online purchase right now to take advantage of our same-day shipping. Pasternack’s PE20DV1285 power splitter has an aluminum housing. This 2.92mm-type connector power divider has a 0.5 dB maximum amplitude balance. This 40 GHz power divider has 5 degrees and 8 degrees typical and maximum phase balance, respectively. Additional power divider specifications and dimensions can be found on its PDF specification datasheet and CAD drawings above. The maximum input VSWR of this 2.92mm-type splitter/divider is 1.8:1 and the minimum isolation is 15 dB. Our radio frequency power divider is built to operate across a temperature range of -40 deg C to 85 deg C. Our 8 port 2.92mm-type power divider is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This 8-way 2.92mm-type female coaxial RF power divider splitter can be bought and shipped worldwide on the same-day as with Pasternack’s other in-stock RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the perfect power divider for your requirements.

1 : $2,860.0
5 : $2,802.8
10 : $2,745.6
25 : $2,688.4

PE37889/HV-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: C, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 7/16 DIN Male Right Angle to C Male Cable 12 Inch Length Using RG393 Coax., Radio frequency assembly 7/16 DIN male right angle to C male cable 12 inch length using RG393 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 7/16 DIN male right angle to C male cable 12 inch length using RG393 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to type C cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with right angle 7/16 DIN cable connection on one end and C type cable connection on the other. Our right angle 7/16 DIN to type C cable assembly has male gender on end 1 and male on end 2. PE37889/HV-12 can also be known as a right angle 7/16 DIN plug to type C plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and PTFE dielectric type. 7/16 DIN plug to C type plug cable assembly PE37889/HV-12 is built with RG393 which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with right angle 7/16 DIN to type C cable connectors, has a 50 Ohm impedance and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE37889/HV-12 RF cable are available on our downloadable PDF datasheet.PE37889/HV-12 can also be used in the other direction and will be C type male to right angle 7/16 DIN male cable assembly if the opposite connectivity is required. 7/16 DIN right angle plug to type C plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to type C cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal 7/16 DIN RF cable assembly as per your requirements.

1 : $317.99
25 : $302.09
50 : $286.19
100 : $273.47