 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
S26V2CJ-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
 Avnet Americas | SS26T3G | onsemi | Schottky Rectifier, 60 V, 2 A, Single, DO-214AA (SMB), 2 Pins, 630 mV - Tape and Reel (Alt: SS26T3G) RoHS : Compliant |
| 67,500 | |
| SS26S-E3/61T | Vishay Intertechnologies | 2A,60V,SM SCHOTTKY RECT - Tape and Reel (Alt: SS26S-E3/61T) RoHS : Compliant |
| 23,400 | ||
| SS26HE3_A/H | Vishay Intertechnologies | Diode Schottky Barrier Rectifier 60V 2A 2-Pin DO-214AA Plastic T/R - Tape and Reel (Alt: SS26HE3_A/H) RoHS : Compliant |
| 12,000 | ||
| B72530E1140S262 | TDK Corporation | - Tape and Reel (Alt: B72530E1140S262) RoHS : Compliant |
| 12,000 | ||
PTVS26VS1UR,115 | Nexperia | TVS Diode, PTVSxS1UR Series, Unidirectional, 26 V, 42.1 V, SOD-123, 2 Pins - Tape and Reel (Alt: PTVS26VS1UR,115) RoHS : Compliant |
| 9,000 | ||
| MURS260T3G | onsemi | Power Rectifier, Ultra-Fast Recovery, 2 A, 600 V - Tape and Reel (Alt: MURS260T3G) RoHS : Compliant |
| 7,500 | ||
| FDS2672 | onsemi | Power MOSFET, N Channel, 200 V, 3.9 A, 0.07 ohm, SOIC, Surface Mount - Tape and Reel (Alt: FDS2672) RoHS : Compliant |
| 2,500 | ||
| 10090929-S264VLF | Amphenol Corporation | D Sub Connector, High Density, Receptacle, FCI 10090929 Series, 26 Contacts, DA, Solder - Trays (Alt: 10090929-S264VLF) RoHS : Compliant |
| 1,570 | ||
| VS-26MT120 | Vishay Intertechnologies | Diode Rectifier Bridge Single 1.2KV 25A 5-Pin Case D-63 - Boxed Product (Development Kits) (Alt: VS-26MT120) RoHS : Compliant |
| 1,263 | ||
ABLS2-6.144MHZ-D4Y-T | Abracon Corporation | Crystal, Microprocessor, 6.144 MHz, SMD, 11.4mm x 4.7mm x 3.3mm, 30 ppm, 18 pF, 30 ppm, ABLS2 - Tape and Reel (Alt: ABLS2-6.144MHZ-D4Y-T) RoHS : Compliant |
| 1,000 | ||
| SM5S26AHE3_A/I | Vishay Intertechnologies | - Tape and Reel (Alt: SM5S26AHE3_A/I) RoHS : Compliant |
| 750 | ||
| B72220S2621K101 | TDK Corporation | - Bulk (Alt: B72220S2621K101) RoHS : Compliant |
| 180 | ||
| ATS-HP-D3L70S26W-111 | Advanced Thermal Solutions Inc | HIGH PERFORMANCE COPPER HEAT PIPE - ROUN - Trays (Alt: ATS-HP-D3L70S26W-111) RoHS : Compliant |
| 50 | ||
| ATS-HP-D6L400S26W-134 | Advanced Thermal Solutions Inc | - Trays (Alt: ATS-HP-D6L400S26W-134) RoHS : Compliant |
| 48 | ||
| DCM2322E72S26A0T60 | Vicor Power | DCM2322T72S26A0T60 Isolated DC to DC Converter Evaluation Board - Boxed Product (Development Kits) (Alt: DCM2322E72S26A0T60) RoHS : Not Compliant |
| 10 | ||
 Newark | MPZ1608S260ATDH5 | TDK Corporation | FERRITE CHIP BEAD, 0603, 0.007OHM, 6A; RoHS : Compliant |
| 14,310 | |
| MPZ1608S260ATDH5 | TDK Corporation | FERRITE CHIP BEAD, 0603, 0.007OHM, 6A; RoHS : Compliant |
| 14,310 | ||
| MTSW-102-22-T-S-265 | Samtec Inc | HDR, BRD-TO-BRD, 2.54MM, 2POS; RoHS : Compliant |
| 2,793 | ||
| MTMM-102-08-T-S-264 | Samtec Inc | PIN HEADER, MTMM-102-08-T-S-264; RoHS : Compliant |
| 2,150 | ||
| MTSW-108-08-S-S-260 | Samtec Inc | HDR, BRD-TO-BRD, 2.54MM, 8POS; RoHS : Compliant |
| 1,041 | ||
| MTSW-116-08-S-S-260 | Samtec Inc | HDR, BRD-TO-BRD, 2.54MM, 16POS; RoHS : Compliant |
| 533 | ||
| TW-06-09-SM-S-267-120 | Samtec Inc | CONN STACK BRD, 2MM, 6POS, HDR; RoHS : Compliant |
| 521 | ||
| MTMM-112-07-L-S-260 | Samtec Inc | HDR, BRD-TO-BRD, 2MM, 12POS; RoHS : Compliant |
| 435 | ||
| ZW-01-07-T-S-260-090 | Samtec Inc | STACKING BOARD CONNECTOR, ZW SERIES; RoHS : Compliant |
| 434 | ||
| ZW-03-10-G-S-260-280 | Samtec Inc | CONN STACK BRD, 2.54MM, 3POS, HDR; RoHS : Compliant |
| 374 | ||
| MTSW-120-08-G-S-265 | Samtec Inc | HDR, BRD-TO-BRD, 2.54MM, 20POS; RoHS : Compliant |
| 369 | ||
| SS26V-080350 | KEMET Corporation | COMMON MODE FILTER, 35MH, 0.8A; RoHS : Compliant |
| 139 | ||
| DW-18-08-G-S-265 | Samtec Inc | CONN STACK BRD, 2.54MM, 18POS, HDR; RoHS : Compliant |
| 137 | ||
| MCABS-266-RC | SPC Multicomp | SPEAKER, MINIATURE, 0HZ-20KHZ, 3W; RoHS : Compliant |
| 50 | ||
| MIKE19/1M/SMAM/S/S/26 | Siretta Ltd | PATCH ANTENNA, 1.575GHZ, 23.39DBI; RoHS : Compliant |
| 10 | ||
 Analog Devices Inc | MAX6390XS26D4+T | Analog Devices Inc | SC70/µDFN, Single/Dual Low-Vol RoHS : Compliant |
| 37,500 | |
| MAX6443US26L+T | Analog Devices Inc | µP Reset Circuits with Long Ma RoHS : Compliant |
| 23,167 | ||
| MAX6444US26L+T | Analog Devices Inc | µP Reset Circuits with Long Ma RoHS : Compliant |
| 18,011 | ||
| MAX6386XS26D3+T | Analog Devices Inc | SC70/µDFN, Single/Dual Low-Vol RoHS : Compliant |
| 15,433 | ||
| MAX6387XS26D3+T | Analog Devices Inc | SC70/µDFN, Single/Dual Low-Vol RoHS : Compliant | 7,500 | |||
| MAX6443US26L+ | Analog Devices Inc | µP Reset Circuits with Long Ma RoHS : Compliant | 3,012 | |||
| MAX6314US26D4+ | Analog Devices Inc | 68HC11/Bidirectional-Compatibl RoHS : Compliant | 2,295 | |||
| MAX6467US26D3+ | Analog Devices Inc | Microprocessor Supervisory Res RoHS : Compliant | 0 | |||
| MAX6314US26D3+ | Analog Devices Inc | 68HC11/Bidirectional-Compatibl RoHS : Compliant | 0 | |||
| MAX6315US26D4+ | Analog Devices Inc | Open-Drain SOT µP Reset Circui RoHS : Compliant | 0 | |||
| MAX6314US26D1+ | Analog Devices Inc | 68HC11/Bidirectional-Compatibl RoHS : Compliant | 0 | |||
| MAX6804US26D3+ | Analog Devices Inc | 4-Pin, Low-Power µP Reset Circ RoHS : Compliant | 0 | |||
| MAX6421US26+ | Analog Devices Inc | Low-Power, SC70/SOT Microproce RoHS : Compliant | 0 | |||
| MAX6423US26+ | Analog Devices Inc | Low-Power, SC70/SOT µP Reset C RoHS : Compliant | 0 | |||
| MAX6390XS26D4+ | Analog Devices Inc | SC70/µDFN, Single/Dual Low-Vol RoHS : Compliant | 0 | |||
 NXP Semiconductors | MFS2613HMDDCAD | NXP Semiconductors | Safety System Basis Chip with Low Power for ASIL D, LQFP-48 Tray, Tray, Bakeable, Multiple in Drypack RoHS : Compliant |
| 5,160 | |
| SFS2600HMBEDAD | NXP Semiconductors | S32K148 for Infotainment Application, Tray, Bakeable, Multiple in Drypack RoHS : Compliant |
| 745 | ||
| SFS2633HMDEZAD | NXP Semiconductors | S32K396 for BMS Application, Tray, Bakeable, Multiple in Drypack RoHS : Compliant |
| 567 | ||
| MFS2613HMDA4AD | NXP Semiconductors | Safety System Basis Chip with Low Power for ASIL D, LQFP-48 Tray, Tray, Bakeable, Multiple in Drypack RoHS : Compliant |
| 3,569 | ||
| SFS2631HMDDYAD | NXP Semiconductors | TC387 for inverter Application, Tray, Bakeable, Multiple in Drypack RoHS : Compliant |
| 1,000 | ||
| SFS2620HMBGBAD | NXP Semiconductors | AM2634 for OBC Application, Tray, Bakeable, Multiple in Drypack RoHS : Compliant |
| 679 | ||
| MFS2613HMDA6AD | NXP Semiconductors | Safety System Basis Chip with Low Power for ASIL D, LQFP-48 Tray, Tray, Bakeable, Multiple in Drypack RoHS : Compliant |
| 3,685 | ||
| MFS2623HMDAEAD | NXP Semiconductors | Safety System Basis Chip with Low Power for ASIL D, LQFP-48 Tray, Tray, Bakeable, Multiple in Drypack RoHS : Compliant |
| 500 | ||
| KITFS26SKTEVM | NXP Semiconductors | FS26 Safety SBC Programming Socket Board, RoHS : Compliant |
| 0 | ||
| LPC55S26JEV98K | NXP Semiconductors | LPC552x/S2x: Mainstream Arm® Cortex®-M33-based Microcontroller Family, Tray, Bakeable, Multiple in Drypack RoHS : Compliant |
| 3,127 | ||
| MFS2613HMDAAAD | NXP Semiconductors | Safety System Basis Chip with Low Power for ASIL D, LQFP-48 Tray, Tray, Bakeable, Multiple in Drypack RoHS : Compliant |
| 790 | ||
| MFS2633HMDAMAD | NXP Semiconductors | Safety System Basis Chip with Low Power for ASIL D, LQFP-48 Tray, Tray, Bakeable, Multiple in Drypack RoHS : Compliant |
| 999 | ||
| SFS2613HMDFKAD | NXP Semiconductors | S32K344 for BMS Application, Tray, Bakeable, Multiple in Drypack RoHS : Compliant |
| 850 | ||
| SFS2631HMDEXAD | NXP Semiconductors | TC387 for DC/DC Application, Tray, Bakeable, Multiple in Drypack RoHS : Compliant |
| 500 | ||
| SFS2633HMDG6AD | NXP Semiconductors | SPC58NH for BMS Application, Tray, Bakeable, Multiple in Drypack RoHS : Compliant |
| 500 | ||
 RS | VS-26MB160A | Vishay Intertechnologies | RECTIFIER BRIDGE GLASS PASSIVATED SINGLE PHASE 1600 V -55 DEGC 150 DEGC RoHS : Compliant |
| 1,634 | |
| XS26-2DE (85064) | Banner Engineering Corp | SAFETY CONTROLLER, 26 INPUT, 2 OUTPUTS, ETHERNET, 24VDC, SCREW TERMINALS, 85064 |
| 26 | ||
| BNS260-02/01Z-ST-R (101184362) | Schmersal | SAFETY SENSOR, CODED MAGNET, 2) NC CONTACTS,1) NC SIGNALING CONTACT, RT HAND DOO |
| 26 | ||
| VS26SA11DF313A | Norgren | DOUBLE SOLENOID VALVE, SPRING RETURN, 24V, 2X3/2, 145PSI, VS26 SERIES |
| 23 | ||
| VS26S511DF213A | Norgren | VALVE, 5/2, SOL/SOL, 24VDC, LOCK, SOFT SEAL SPOOL |
| 11 | ||
| VS26SB11DF213A | Norgren | VALVE, 2X3/2 NO, SOL/SPRING RTN, INT PILOT, 3-10 BAR, 24VDC, PUSH/TURN OVERRIDE |
| 7 | ||
| M2SS2-60B01 | ABB Low Voltage Products and Systems | 2POS KNOB A-C BLK CMR 1NC MAIN |
| 3 | ||
| VS26SB11DF313A | Norgren | VALVE, DBL SOL, SPR RTN, NO, 24V, 2X3/2, 145PSI, 1250L/M, VS26 SERIES |
| 3 | ||
| VS2672932-KG00 | Norgren | VALVE, PILOT |
| 2 | ||
| BNS260-02ZG-ST-L (101184381) | Schmersal | SAFETY SENSOR, CODED MAGNET, 2) NC CONTACTS, LED, LEFT HAND DOOR |
| 2 | ||
| BHS0033 (BES 516-300-S265-S4-D) | Balluff Inc | INDUCTIVE SENSOR, 1.5 MM RANGE, M12 FLUSH, PNP-NO, 10-30 VDC, BES SERIES |
| 2 | ||
| TANGO17/5M/LL/SMAM/S/S/26 (1248710) | Siretta Ltd | ANTENNA, 3G/GSM/GPRS BELL ANTENNA IP67 SMA-M 5M |
| 2 | ||
| VS26G517DF218A | Norgren | VALVE, 5/2, SOL/SPRING, 115VAC, VS26 SERIES |
| 1 | ||
| BNS260-11/01Z-R (101184372) | Schmersal | SAFETY SENSOR, CODED MAGNET, 1)NO/1)NC CONTACTS, NC SIGNALING CONTACT, RH DOOR |
| 1 | ||
| BFS0001 (BFS 26K-PS-L01-S115) | Balluff Inc | SENSOR, PHOTOELECTRIC, COLOR, BLOCK, WHITE LIGHT, 32MM, (3) PNP, TEACH-IN, LO |
| 1 | ||
 STMicroelectronics | STS26N3LLH6 | STMicroelectronics | N-channel 30 V, 0.0038 Ohm, 26 A, SO-8 STripFET(TM) VI DeepGATE(TM) Power MOSFET RoHS : Compliant |
| 78 | |
 Microchip Technology Inc | MCP6S26-I/SL | Microchip Technology Inc | 6-Chan. 12 MHz SPI PGA, SOIC, Projected EOL: 2036-04-04 RoHS : Compliant |
| 52,175 | |
MCP6S26-I/P | Microchip Technology Inc | 6-Chan. 12 MHz SPI PGA, PDIP, Projected EOL: 2036-04-04 RoHS : Compliant |
| 5,134 | ||
MCP6S26T-I/ST | Microchip Technology Inc | 6-Chan. 12 MHz SPI PGA, TSSOP, Projected EOL: 2036-04-04 RoHS : Compliant |
| 2,500 | ||
| MCP6S26-I/ST | Microchip Technology Inc | 6-Chan. 12 MHz SPI PGA, TSSOP, Projected EOL: 2036-04-04 RoHS : Compliant |
| 2,282 | ||
| UES2603 | Microchip Technology Inc | UFR,FRR _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 861 | ||
| UES2605HR2 | Microchip Technology Inc | UFR,FRR _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 284 | ||
| UES2606 | Microchip Technology Inc | UFR,FRR _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 79 | ||
| UES2602 | Microchip Technology Inc | UFR,FRR _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 17 | ||
| TFS265 | Microchip Technology Inc | TFS265, Projected EOL: 2050-07-31 - Contact for Pricing RoHS : Compliant | 0 | |||
| TFS265A | Microchip Technology Inc | TFS265A, Projected EOL: 2050-07-31 - Contact for Pricing | 0 | |||
| UES2601 | Microchip Technology Inc | UFR,FRR _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| TFS261B | Microchip Technology Inc | TFS261B, Projected EOL: 2050-07-31 - Contact for Pricing | 0 | |||
| TFS2655B | Microchip Technology Inc | TFS2655B, Projected EOL: 2050-07-31 - Contact for Pricing RoHS : Compliant | 0 | |||
| UES2606R | Microchip Technology Inc | UFR,FRR _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| UES2602R | Microchip Technology Inc | UFR,FRR _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
 Bisco Industries | 1056-SS-26 | RAF Electronic Hardware | 1,950 | |||
| 7109-S-26 | RAF Electronic Hardware | 300 | ||||
| 4542-632-SS-26 MODB=3/8 | RAF Electronic Hardware | 217 | ||||
| 0107-SS-26 | RAF Electronic Hardware | 123 | ||||
| 1-MFS-2-6 | SOCKET SCREWS | 100 | ||||
| M0321-SS-26 | RAF Electronic Hardware | 79 | ||||
| MS 26TB06 GME 07E | Marathon Motors | 15 | ||||
| 0165-SS-26 | RAF Electronic Hardware | 10 | ||||
| 7108-SS-26 | RAF Electronic Hardware | 7 | ||||
| S-264-2 | MISC. INDUSTRIAL HRD | 4 | ||||
| 1179-10-SS-26 | RAF Electronic Hardware | 2 | ||||
| FS436US26D | MISCELLANEOUS | 1 | ||||
| SS2-64 | WM Berg | 1 | ||||
| 14002-R-SS-.265-12A | Accurate Screw Machine | 1 | ||||
| 25EM26S-26 | WM Berg | 1 | ||||
 Rochester Electronics | MFS2630AMDA0AD | NXP Semiconductors | Adjustable, 8 Channel, CMOS, PQFP48 RoHS : Compliant |
| 1,647 | |
| NCP163AFCS260T2G | onsemi | LDO Regulator, 250 mA, Ultra-High PSRR, Ultra-Low Noise 2.6 V, Active Discharge RoHS : Compliant |
| 110,000 | ||
| CY8C4147LQS-S263T | Infineon Technologies AG | IC MCU ARM® Cortex®-M0+ 32Bit 1 Core FLASH 128kB (128k x 8) 48MHz 40-QFN T/R RoHS : Compliant |
| 32,463 | ||
| S26KS256SDGBHV030 | Infineon Technologies AG | HyperFlash - NOR 256Mbit 32M x 8 1.7V - 1.95V HyperBus 133MHz 96ns 24-BGA Tray RoHS : Compliant |
| 329 | ||
TMDS261BPAGR | Texas Instruments | Video Processor Switch Consumer Video 64-QFP T/R RoHS : Compliant |
| 126,230 | ||
TMDS261PAGR | Texas Instruments | Consumer Circuit, PQFP64 RoHS : Compliant |
| 120,000 | ||
S26KL128SDABHA030 | Cypress Semiconductor | HyperFlash - NOR 128Mbit 16M x 8 2.7V - 3.6V HyperBus 100MHz 96ns 24-BGA Tray RoHS : Compliant |
| 878 | ||
| S26KL256SDABHN020 | Cypress Semiconductor | HyperFlash - NOR 256Mbit 32M x 8 2.7V - 3.6V HyperBus 100MHz 96ns 24-BGA Tray RoHS : Compliant |
| 878 | ||
| S26KS256SDGBHV030 | Cypress Semiconductor | HyperFlash - NOR 256Mbit 32M x 8 1.7V - 1.95V HyperBus 133MHz 96ns 24-BGA Tray RoHS : Compliant |
| 1,178 | ||
MAX6468XS26D1+ | Maxim Integrated Products | MAX6468XS26D1 Triple Ultra-Low-Voltage Microprocessor Supervisory Circuit RoHS : Compliant |
| 2,350 | ||
MAX6468XS26D3-T | Maxim Integrated Products | Microprocessor Supervisory Reset Circuit RoHS : Not Compliant |
| 14,910 | ||
| MAX6803US26D3+ | Maxim Integrated Products | MAX6803 4-Pin, Low-Power Microprocessor Reset Circuit With Manual Reset RoHS : Compliant |
| 1,689 | ||
| DM54LS260W/883 | National Semiconductor Corporation | NOR Gate, LS Series, 2-Func, 5-Input, TTL, CDFP14 RoHS : Not Compliant |
| 8 | ||
| DS26F32MJ | National Semiconductor Corporation | Line Receiver, 1 Func, 4 Rcvr, BIPolar, CDIP16 RoHS : Not Compliant |
| 298 | ||
| S26KS256SDGBHV030 | Spansion | HyperFlash - NOR 256Mbit 32M x 8 1.7V - 1.95V HyperBus 133MHz 96ns 24-BGA Tray RoHS : Compliant |
| 840 | ||
 Sager | ZW-01-07-T-S-260-090 | Samtec Inc | Board to Board & Mezzanine Connectors Flexible Board Stacking Header, 0.100 Pitch RoHS : Compliant |
| 434 | |
| ZW-03-10-G-S-260-280 | Samtec Inc | Board to Board & Mezzanine Connectors Flexible Board Stacking Header, 0.100 Pitch RoHS : Compliant |
| 374 | ||
| 82A0111-10-9CS2630 | TE Connectivity | TE Connectivity | 0 | |||
| MTSW-124-24-S-S-260 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| ZF5S-26-03-T-WT-TR | Samtec Inc | Headers & Wire Housings Zero Insertion Force Connector for FFC, 0.50 mm (.0197) Pitch RoHS : Compliant |
| 0 | ||
| TW-31-07-L-S-260-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| TW-32-06-T-S-260-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| TW-33-02-G-S-260-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| TW-34-09-F-S-260-090 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| TW-35-02-F-S-263-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| TW-35-07-T-S-260-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| TFSS-26-28C-G-18.00-D-NUS | Samtec Inc | .050 TIGER EYE� SINGLE ROW DISCRETE WIRE CABLE ASSEMBLY, TERMINAL |
| 0 | ||
| MTSW-101-07-G-S-267 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| MTSW-104-24-L-S-266 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| MTSW-108-22-S-S-265-NA | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
 Coilcraft Direct | 0805CS-261XJEC | Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, RoHS, halogen-free RoHS : Compliant |
| 0 | |
| 0805CS-261XJLC | Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, RoHS RoHS : Compliant |
| 0 | ||
| 1008HS-261TJLC | Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, RoHS RoHS : Compliant |
| 0 | ||
 TME | YDTS26W09-98PNV001 | TE Connectivity | Connector: circular; plug; 7.5A; PIN: 3; straight; gold-plated RoHS : Not Compliant |
| 4,841 | |
| SS26HE3_A/H | Vishay Intertechnologies | Diode: Schottky rectifying; SMB; SMD; 60V; 2A; 7 inch reel RoHS : Compliant |
| 539 | ||
| AIO-BICS-26 | Amphenol Corporation | Cable gland; M25; 1.5; IP66,IP68; polyamide; black |
| 290 | ||
| MFS2630AMDA0AD | NXP Semiconductors | MFS2630AMDA0AD |
| 250 | ||
| YDTS26F11-98JNV001 | TE Connectivity | Connector: circular; plug; 7.5A; PIN: 6; straight; crimped RoHS : Compliant |
| 100 | ||
| S26 GZ38 | Pneumatic Components Limited (PCL) | Quick connection coupling; straight; max.35bar; brass; D: 25mm |
| 39 | ||
| VS-26MT20 | Vishay Intertechnologies | Bridge rectifier: three-phase; Urmax: 200V; If: 25A; Ifsm: 360A; THT RoHS : Compliant |
| 18 | ||
| DTS26S13-35SN | TE Connectivity | Connector: circular; plug; PIN: 22; straight; crimped; gold-plated RoHS : Compliant |
| 18 | ||
| DTS26Z15-19SN [V001] | TE Connectivity | Connector: circular; plug; PIN: 19; straight; gold-plated |
| 17 | ||
| CDS263D | Andeen-Hagerling Inc | RCD breaker; Inom: 63A; Ires: 30mA; Max surge current: 250A; 240VAC |
| 11 | ||
| DTS26Z09-35PB [V001] | TE Connectivity | Connector: circular; plug; PIN: 6; straight; gold-plated |
| 1 | ||
| TES-2619.07-B | Agilink Microwires | Wire; 7x26AWG; shielded,silver plated copper braid; white; 600V |
| 0 | ||
| SS26-M3/5BT | Vishay Intertechnologies | Diode: Schottky rectifying; SMB; SMD; 60V; 2A; 13 inch reel RoHS : Compliant |
| 0 | ||
| MPZ1608S260ATDH5 | TDK Corporation | Ferrite: bead; Imp.@ 100MHz: 26Ω; SMD; 6A; 0603; R: 7mΩ; -55÷125°C RoHS : Compliant |
| 0 | ||
| D3L70S26W-111 | Advanced Thermal Solutions Inc | Heatsink: heat pipe; round; natural; L: 70mm; copper; raw; Ø: 3mm |
| 0 | ||
 ComSIT USA | SS26T3G | ON SEMICONDUCTOR/ONSEMI | AVAILABLE EU | 283 | ||
| DS26LV32ATMNOPB | Texas Instruments | AVAILABLE EU | 29 | |||
| DS26C32ATMXNOPB | NATIONAL SEMI/TEXAS INSTRUMENTS | AVAILABLE EU | 677 | |||
| APX803S26SA7 | Diodes Incorporated | AVAILABLE EU | 278 | |||
| S263689C04 | SUNTECH CIRCUITS | AVAILABLE EU | 735 | |||
| DS26LV32ATMXNOPB | Texas Instruments | AVAILABLE EU | 51 | |||
ComSIT USA | LYS269B0GROUPD | OSRAM GmbH | DIFFUSED, SOT-23 LED Single Color LED RoHS : Not Compliant | 9,000 | ||
| LYS269B0GROUPC | OSRAM GmbH | DIFFUSED, SOT-23 LED Single Color LED RoHS : Not Compliant | 3,000 | |||
| LYS269B0GROUPB | OSRAM GmbH | DIFFUSED, SOT-23 LED Single Color LED RoHS : Not Compliant | 3,000 | |||
| MAX6314US26D4T | Maxim Integrated Products | 68HC11/BIDIRECTIONAL-COMPATIBLE MICROPROCESSOR RESET CIRCUIT Power Supply Support Circuit, Fixed, 1 Channel, +2.63VV, CMOS, PDSO4 RoHS : Not Compliant | 2,365 | |||
| DS26C31TM | National Semiconductor Corporation | CMOS QUAD TRI-STATE DIFFERENTIAL LINE DRIVER Line Driver, 4 Func, 4 Driver, CMOS, PDSO16 RoHS : Not Compliant | 1,471 | |||
| KOZRBS2617 | Kaco New Energy | Electronic Component RoHS : Not Compliant | 1,169 | |||
| LGS260D0GEGURT | Siemens | Electronic Component RoHS : Not Compliant | 960 | |||
| SS26E352T | Vishay Intertechnologies | SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER Rectifier Diode, Schottky, 1 Phase, 1 Element, 2A, 60V V(RRM), Silicon, DO-214AA RoHS : Compliant | 915 | |||
| DS26LS31CMX | National Semiconductor Corporation | QUAD HIGH SPEED DIFFERENTIAL LINE DRIVER Line Driver, 4 Func, 4 Driver, BIPolar, PDSO16 RoHS : Not Compliant | 285 | |||
| DS26LV32ATM | National Semiconductor Corporation | 3V ENHANCED CMOS QUAD DIFFERENTIAL LINE RECEIVER Line Receiver, 4 Func, 4 Rcvr, CMOS, PDSO16 RoHS : Not Compliant | 155 | |||
| DV8526515S2600RA | dev | Electronic Component RoHS : Compliant | 88 | |||
| DS26C32ATM | National Semiconductor Corporation | QUAD DIFFERENTIAL LINE RECEIVER Line Receiver, 4 Func, 4 Rcvr, CMOS, PDSO16 RoHS : Not Compliant | 36 | |||
| DS26C31MJ883Q | National Semiconductor Corporation | CMOS QUAD TRI-STATE DIFFERENTIAL LINE DRIVER Line Driver, 4 Func, 4 Driver, CMOS, CDIP16 RoHS : Not Compliant | 25 | |||
| TGS2620 | FIGARO Engineering Inc | Electronic Component RoHS : Not Compliant | 25 | |||
| DS26C31TN | National Semiconductor Corporation | CMOS QUAD TRI-STATE DIFFERENTIAL LINE DRIVER Line Driver, 4 Func, 4 Driver, CMOS, PDIP16 RoHS : Not Compliant | 19 | |||
 GLYN GmbH & Co. KG | P0840VGF1MA00-CS-26134 | Tianma Micro-electronics Co | TFT 8.40", 640x480, IPS, 900cd, RGB (TTL) | 15 | ||
 Interstate Connecting Components | YDTS26F09-98ADV001 | TE Connectivity | PLUG ASSY RoHS : Compliant | 0 | ||
| YDTS26F11-99BAV001 | TE Connectivity | PLUG ASSY RoHS : Compliant | 0 | |||
| YDTS26F13-08ANV001 | TE Connectivity | PLUG ASSY RoHS : Compliant | 0 | |||
| YDTS26F13-98ACV001 | TE Connectivity | PLUG ASSY RoHS : Compliant | 0 | |||
| YDTS26F15-97BEV001 | TE Connectivity | PLUG ASSY RoHS : Compliant | 0 | |||
| YDTS26F17-08BCV001 | TE Connectivity | PLUG ASSY RoHS : Compliant | 0 | |||
| YDTS26F19-32AEV001 | TE Connectivity | PLUG ASSY RoHS : Compliant | 0 | |||
| YDTS26F19-35SAC001 | TE Connectivity | PLUG ASSY RoHS : Compliant | 0 | |||
| YDTS26F23-35SAV001 | TE Connectivity | PLUG ASSY RoHS : Not Compliant | 0 | |||
| YDTS26F25-19BNV001 | TE Connectivity | PLUG ASSY RoHS : Compliant | 0 | |||
| YDTS26F25-20BNV001 | TE Connectivity | PLUG ASSY RoHS : Compliant | 0 | |||
| YDTS26W09-98PNV001 | TE Connectivity | PLUG ASSY RoHS : Not Compliant | 0 | |||
| YDTS26W11-35BBV001 | TE Connectivity | PLUG ASSY RoHS : Not Compliant | 0 | |||
| YDTS26W13-04BNV001 | TE Connectivity | PLUG ASSY RoHS : Not Compliant | 0 | |||
| YDTS26W15-18ABV001 | TE Connectivity | PLUG ASSY RoHS : Not Compliant | 0 | |||
 NexGen Digital | TGS2612-D01 | FIGARO Engineering Inc | 260,850 | |||
| TPS26400PWPR | Texas Instruments | RoHS : Compliant | 83,476 | |||
| DS26514GN+ | Analog Devices Inc | RoHS : Compliant | 900 | |||
PTVS26VZ1USKYL | Nexperia | RoHS : Compliant | 779 | |||
| SN74LS26N | Motorola Semiconductor Products | RoHS : Not Compliant | 200 | |||
| DS26LS32ACN | National Semiconductor Corporation | RoHS : Not Compliant | 108 | |||
| MURS260T3G | onsemi | RoHS : Compliant | 17 | |||
| TKS2606CT-ND | TOKO Inc | 8 | ||||
 PEI Genesis | SM20WL3S26 | SOURIAU-SUNBANK |
| 490 | ||
| S2613-0012 | SOURIAU-SUNBANK |
| 0 | |||
| S2630-2406-34 | SOURIAU-SUNBANK |
| 0 | |||
| GRA.2S.269.GR | LEMO connectors |
| 0 | |||
| S2636-1403-34 | SOURIAU-SUNBANK |
| 0 | |||
| S2636-2006-34 | SOURIAU-SUNBANK |
| 0 | |||
| S2673-0904-4S | SOURIAU-SUNBANK |
| 0 | |||
| WS-26 | Daniels Manufacturing Corporation (DMC) |
| 0 | |||
| GRA.0S.269.GR | LEMO connectors |
| 0 | |||
| GRA.3S.269.GM | LEMO connectors |
| 0 | |||
| S2630-1805-34 | SOURIAU-SUNBANK |
| 0 | |||
| S2647-03C | SOURIAU-SUNBANK |
| 0 | |||
| S2647-06 | SOURIAU-SUNBANK |
| 0 | |||
| RQP0B1-7S-26-M1-M150 | Ulti-Mate Connector Inc |
| 0 | |||
| 8D717S26PD | SOURIAU-SUNBANK | RoHS : Unknown |
| 0 | ||
 Powell Electronics | 55FB1521-16-FLT2-0CS2636 | TE Connectivity | Connectors |
| 4,288 | |
| MTMM-102-08-T-S-264 | Samtec Inc | PCB Header, 2.00mm Pitch, SMT, Male, Mal RoHS : Compliant |
| 1,419 | ||
| 22759/43-16-9CS2621 | TE Connectivity | Connectors RoHS : Compliant |
| 1,254 | ||
| MTLW-103-24-T-S-268 | Samtec Inc | PCB Header, 2.00mm Pitch, Through-Hole, RoHS : Compliant |
| 832 | ||
| MTSW-116-08-S-S-260 | Samtec Inc | Variable Height PCB Header Strips, 0.100 RoHS : Compliant |
| 352 | ||
| TW-06-09-SM-S-267-120 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 344 | ||
| MTMM-112-07-L-S-260 | Samtec Inc | Variable Post Height Header Strips, 2.00 RoHS : Compliant |
| 287 | ||
| ZW-01-07-T-S-260-090 | Samtec Inc | Flexible Board Stacking Header, 0.100" P RoHS : Compliant |
| 286 | ||
| ZW-03-10-G-S-260-280 | Samtec Inc | Flexible Board Stacking Header, 0.100" P RoHS : Compliant |
| 247 | ||
| MTSW-120-08-G-S-265 | Samtec Inc | Variable Height PCB Header Strips, 0.100 RoHS : Compliant |
| 244 | ||
| YDTS26W09-98PNV001 | TE Connectivity | PLUG ASSY RoHS : Not Compliant |
| 134 | ||
| YDTS26W15-19PNV001 | TE Connectivity | DTS26 PLUG SZ15-19 PIN CAD RoHS : Not Compliant |
| 86 | ||
| YDTS26F11-98JNV001 | TE Connectivity | DTS26 PLUG SZ11-98 SKTHC EN RoHS : Compliant |
| 66 | ||
| YDTS26W13-04SAV001 | TE Connectivity | PLUG ASSY RoHS : Not Compliant |
| 22 | ||
| YDTS26W15-35PBV001 | TE Connectivity | PLUG ASSY RoHS : Compliant |
| 3 | ||
 PUI | SS26-HF | 25,000 | ||||
| 2211-1X06G00S/2.6/2.8B | 1,113 | |||||
| 2211-1X04G00S-2.6-2.8B | 499 | |||||
| 2211-2X40G00S-2.6-2.8B | 333 | |||||
| 2211-1X01G00S-2.6-2.8 | 200 | |||||
| 2011-2X03G00S-2.6-10.9B-I | 200 | |||||
| 2211-1X09G00S-2.6-2.8B | 153 | |||||
| 2211-1X07G00S/2.6/2.8B | 34 | |||||
 Richardson RFPD | 3P5MST-13S26-3P5MST-24 | Acuity Brands Lighting Inc | RFTEST CABLE ASSY RoHS : Compliant | 10 | ||
| AGPS26MMMC | Amphenol PCTEL | Antenna Unit RoHS : Not Compliant |
| 0 | ||
| HP12S26-600TH | Wall Industries Inc | Brick Style DC/DC Converter RoHS : Not Compliant | 0 | |||
| NMST-13S26-NMST-24 | Acuity Brands Lighting Inc | RFTEST CABLE ASSY RoHS : Compliant | 0 | |||
| CCR-58S26C-T | Teledyne Relays | RF Switch 0MHz to 26.5GHz 50dB RoHS : Not Compliant | 0 | |||
| FB48S26-300TH | Wall Industries Inc | DCTODC CONVERTR MOD | 0 | |||
| 3P5MST-13S26-3P5FST-24 | Acuity Brands Lighting Inc | RFTEST CABLE ASSY RoHS : Compliant | 0 | |||
| HP12S26-600 | Wall Industries Inc | 600 Watts Brick Style DC/DC Converter Single Outpu | 0 | |||
| ATS-HP-D3L70S26W-111 | Advanced Thermal Solutions Inc | Thrml Mgmt Access Round Heat Pipe Copper Alloy RoHS : Compliant |
| 0 | ||
| 3P5FST-13S26-3P5FST-36 | Acuity Brands Lighting Inc | RFTEST CABLE ASSY RoHS : Compliant | 0 | |||
| S26P200D15Y | Tamura Corporation of America | Closed Loop Current Sensor AC/DC Current ±12V/±15V RoHS : Compliant |
| 0 | ||
| FDS2672 | onsemi | Trans MOSFET N-CH 200V 3.9A 8-Pin SOIC T/R RoHS : Compliant | 0 | |||
| HFSMAMST-13S26-HFSMAMST-36 | Acuity Brands Lighting Inc | RFTEST CABLE ASSY RoHS : Compliant | 0 | |||
| TS260MC | Spectrum Control | Conn SMA 0Hz to 26.5GHz 50Ohm ST M Gold RoHS : Compliant |
| 0 | ||
HVMLS263M7R5EA0C | Knowles CDE | Ultra Long Life, Aluminum Electrolytic Capacitor RoHS : Not Compliant | 0 | |||
 Rutronik | SS26-E3/52T | Vishay Intertechnologies | SCHOTTKY-DIODE 2A 60V SMB RoHS : Compliant |
| 59,250 | |
| SISS26LDN-T1-UE3 | Vishay Intertechnologies | N-CH 60V 81.2A 3.4mOhm PPAK1212-8S RoHS : Compliant |
| 6,000 | ||
| SS26S-E3/61T | Vishay Intertechnologies | SCHOTTKY-DIODE 2A 60V SMA RoHS : Compliant |
| 3,600 | ||
| SM8S26AHM3/I | Vishay Intertechnologies | TRANSIL AUTO 0,008KW 26V DO218AC RoHS : Compliant |
| 750 | ||
| IAUS260N10S5N019TATMA1 | Infineon Technologies AG | N-CH 100V 260A 1,6mOhm TOLT RoHS : Compliant |
| 19 | ||
 Chip 1 Exchange | SS26HE3_A/H | Vishay Intertechnologies | INSTOCK RoHS : Compliant | 117,000 | ||
| MAX6315US26D4+ | Maxim Integrated Products | INSTOCK RoHS : Compliant | 10,650 | |||
| MAX6314US26D4+ | Maxim Integrated Products | INSTOCK RoHS : Compliant | 10,382 | |||
| B72500T1140S260 | INSTOCK | 10,034 | ||||
| OSS260 | INSTOCK | 9,000 | ||||
| YDTS26W09-98PNV001 | TE Connectivity | INSTOCK RoHS : Not Compliant | 6,293 | |||
| LGS260-D0 | OSRAM GmbH | INSTOCK | 3,000 | |||
| STIFTWANNE MKS 2654 | STOCK | INSTOCK | 2,037 | |||
| MPZ1608S260ATDH5 | TDK Corporation | INSTOCK RoHS : Compliant | 911 | |||
| MAX6314US26D4+ | MD | INSTOCK | 818 | |||
| ES2668 | INSTOCK | 300 | ||||
| DS26C32ATM | INSTOCK | 146 | ||||
| DS26C31TM/NOPB | National Semiconductor Corporation | INSTOCK RoHS : Compliant | 54 | |||
| DM74LS26M | INSTOCK | 50 | ||||
| DM74LS26M | National Semiconductor Corporation | INSTOCK RoHS : Not Compliant | 50 | |||
 Avnet Abacus | B72510E1140S262 | TDK Corporation | (Alt: B72510E1140S262) RoHS : Compliant | 72,000 | ||
| MPZ1608S260ATDH5 | TDK Corporation | Ferrite Bead 0603 1608 Metric 26 ohm 6 A MPZ Series 0007 ohm 25 (Alt: MPZ1608S260ATDH5) RoHS : Compliant | 16,000 | |||
| B82725S2602N41 | TDK Corporation | (Alt: B82725S2602N041) RoHS : Compliant | 10,000 | |||
| ABLS2-6.000MHZ-D4Y-T | Abracon Corporation | Crystal Surface Mount 6 MHz SMD 114mm x 47mm 30 ppm 18 pF 30 ppm ABLS2 Series - Tape and Reel (Alt: ABLS2-6.000MHZ-D4Y-T) RoHS : Compliant | 3,000 | |||
| B72220S2681K101 | TDK Corporation | (Alt: B72220S2681K101) RoHS : Compliant | 2,000 | |||
| 10090929-S264XLF | Amphenol Corporation | D Sub Connector High Density Receptacle FCI 10090929 Series 26 Contacts DA Solder (Alt: 10090929-S264XLF) RoHS : Compliant | 1,540 | |||
| ECS-260-10-33B-CKM-TR | ECS International Inc | - Tape and Reel (Alt: ECS-260-10-33B-CKM-TR) RoHS : Compliant | 1,000 | |||
| 579S260CAT | CTS Corporation | - Tape and Reel (Alt: 579S260CAT) RoHS : Compliant | 0 | |||
| SS26V-080350 | KEMET Corporation | Choke Common Mode 35 mH 800 mA (Alt: SS26V-080350) RoHS : Compliant | 0 | |||
| CG21AS26F474MR | Kyocera AVX Components | (Alt: CG21AS26F474MR) RoHS : Compliant | 0 | |||
| CAS26C152MARFC | KEMET Corporation | Ceramic Suppression Capacitor 1500 pF 20 X1 Y2 250 VAC 250 VAC 2211 5728 Metric (Alt: CAS26C152MARFC) RoHS : Compliant | 0 | |||
| CAS26C270GAGFC | KEMET Corporation | Ceramic Suppression Capacitor 27 pF 2 X1 Y2 250 VAC 250 VAC 2211 5728 Metric (Alt: CAS26C270GAGFC) RoHS : Compliant | 0 | |||
| CAS26C470MAGFC | KEMET Corporation | Ceramic Suppression Capacitor 47 pF 20 X1 Y2 250 VAC 250 VAC 2211 5728 Metric (Alt: CAS26C470MAGFC) RoHS : Compliant | 0 | |||
| CAS26C182MARFC | KEMET Corporation | Ceramic Suppression Capacitor 1800 pF 20 X1 Y2 250 VAC 250 VAC 2211 5728 Metric (Alt: CAS26C182MARFC) RoHS : Compliant | 0 | |||
| MTMM-112-07-L-S-260 | Samtec Inc | Pin Header BoardtoBoard WiretoBoard 1 Rows 12 Contacts Through Hole MTMM Series (Alt: MTMM-112-07-L-S-260) RoHS : Compliant | 0 | |||
Avnet Asia | PB5615-S26 | PanJit Semiconductor | (Alt: PB5615-S26) RoHS : Compliant |
| 6,000 | |
| SS26HE3_A/H | Vishay Intertechnologies | Diode Schottky Barrier Rectifier 60V 2A 2-Pin DO-214AA Plastic T/R (Alt: SS26HE3_A/H) RoHS : Compliant | 0 | |||
| MPZ1608S260ATDH5 | TDK Corporation | Ferrite Bead, 0603 [1608 Metric], 26 ohm, 6 A, MPZ Series, 0.007 ohm, ? 25% (Alt: MPZ1608S260ATDH5) RoHS : Compliant | 0 | |||
| MPZ1608S260ATAH0 | TDK Corporation | Ferrite Bead, 0603 [1608 Metric], 26 ohm, 6 A, MPZ Series, 0.007 ohm, ? 25% (Alt: MPZ1608S260ATAH0) RoHS : Compliant | 0 | |||
| SS26SHE3_B/I | Vishay Intertechnologies | (Alt: SS26SHE3_B/I) RoHS : Compliant | 0 | |||
| SISS26LDN-T1-GE3 | Vishay Intertechnologies | (Alt: SISS26LDN-T1-GE3) RoHS : Compliant | 0 | |||
| SC14481B3MRS26QNCX | Renesas Electronics Corporation | (Alt: SC14481B3MRS26QNCX) RoHS : Compliant | 0 | |||
| CAS26C101KAGFC | KEMET Corporation | (Alt: CAS26C101KAGFC) RoHS : Compliant |
| 0 | ||
| HMTSW-102-24-T-S-266 | Samtec Inc | (Alt: HMTSW-102-24-T-S-266) RoHS : Compliant | 0 | |||
| VR20AS26F540R | Kyocera AVX Components | TVS Varistor, 18 VAC, 26 VDC, TransGuard Automotive, 54 V, Radial Leaded, Multilayer Varistor (MLV) (Alt: VR20AS26F540R) RoHS : Compliant | 0 | |||
| SS26HM3_A/H | Vishay Intertechnologies | Diode Schottky 2A 2-Pin DO-214AA T/R (Alt: SS26HM3_A/H) RoHS : Compliant | 0 | |||
| PTVS26VS1UR,115 | Nexperia | TVS Diode, PTVSxS1UR Series, Unidirectional, 26 V, 42.1 V, SOD-123, 2 Pins (Alt: PTVS26VS1UR,115) RoHS : Compliant |
| 0 | ||
| FDS2672 | onsemi | Power MOSFET, N Channel, 200 V, 3.9 A, 0.07 ohm, SOIC, Surface Mount (Alt: FDS2672) RoHS : Compliant | 0 | |||
| TSSS2600 | Vishay Intertechnologies | (Alt: TSSS2600) RoHS : Compliant |
| 0 | ||
| SS26T3G | onsemi | Schottky Rectifier, 60 V, 2 A, Single, DO-214AA (SMB), 2 Pins, 630 mV (Alt: SS26T3G) RoHS : Compliant |
| 0 | ||
 Avnet Silica | MURS260T3G | onsemi | Power Rectifier UltraFast Recovery 2 A 600 V (Alt: MURS260T3G) RoHS : Compliant | 130,000 | ||
| MBRS260T3G | onsemi | Schottky Rectifier 60 V 2 A Single DO214AA SMB 2 Pins 630 mV (Alt: MBRS260T3G) RoHS : Compliant | 90,000 | |||
| DFLS260-7 | Diodes Incorporated | Schottky Rectifier 60 V 2 A Single PowerDI 123 2 Pins 620 mV (Alt: DFLS260-7) RoHS : Compliant | 54,000 | |||
| APX809S-26SR-7 | Diodes Incorporated | Voltage Detector 1 Monitor 26 V ActiveLowPushPull 1 V to 55 V SOT233 (Alt: APX809S-26SR-7) RoHS : Compliant | 3,000 | |||
| APX810S-26SR-7 | Diodes Incorporated | Reset Generator SOT23 TR 3K (Alt: APX810S-26SR-7) RoHS : Compliant | 3,000 | |||
| APX803S-26SR-7 | Diodes Incorporated | Reset Generator SOT23 TR 3K (Alt: APX803S-26SR-7) RoHS : Compliant | 3,000 | |||
| SS26T3G | onsemi | Schottky Rectifier 60 V 2 A Single DO214AA SMB 2 Pins 630 mV (Alt: SS26T3G) RoHS : Compliant | 2,500 | |||
| MFS2630AMBA0AD | NXP Semiconductors | (Alt: MFS2630AMBA0AD) RoHS : Compliant | 1,000 | |||
| MFS2613HMDHKAD | NXP Semiconductors | EFS26 (Alt: MFS2613HMDHKAD) RoHS : Compliant | 500 | |||
| MFS2633HMDAKAD | NXP Semiconductors | EFS26 (Alt: MFS2633HMDAKAD) RoHS : Compliant | 250 | |||
| MFS2633AMDA0AD | NXP Semiconductors | (Alt: MFS2633AMDA0AD) RoHS : Compliant | 250 | |||
| MFS2630AMDA0AD | NXP Semiconductors | (Alt: MFS2630AMDA0AD) RoHS : Compliant | 0 | |||
| MFS2633AMDAKAD | NXP Semiconductors | System Basis Chip SPI 32 V to 36 V 48 Pins LQFPEP (Alt: MFS2633AMDAKAD) RoHS : Compliant | 0 | |||
| NCP163AFCS260T2G | onsemi | LDO Regulator 250 mA UltraHigh PSRR UltraLow Noise 26 V Active Discharge ONSSPCLDO (Alt: NCP163AFCS260T2G) RoHS : Compliant | 0 | |||
| MFS2633AMDC3ADR2 | NXP Semiconductors | System Basis Chip SPI 32 V to 36 V 48 Pins LQFPEP (Alt: MFS2633AMDC3ADR2) RoHS : Compliant | 0 | |||
 Braemac Americas-Symmetry | AMMLPAAVJS-26.0000T | Abracon Corporation |
| 0 | ||
| AMMLPEAXRS-26.0000T | Abracon Corporation |
| 0 | |||
| AMMLPFLBLRS-26.0000T | Abracon Corporation |
| 0 | |||
| AMMLPABXRS-26.0000T | Abracon Corporation |
| 0 | |||
| AMMLPFLBVJS-26.0000T | Abracon Corporation |
| 0 | |||
| AMMLPVAXCS-26.0000T | Abracon Corporation |
| 0 | |||
| AMMLPEBVRS-26.0000T | Abracon Corporation |
| 0 | |||
| AMMLPDBLJS-26.0000T | Abracon Corporation |
| 0 | |||
| AMMLPEBLCS-26.0000T | Abracon Corporation |
| 0 | |||
| AMMLPAALJS-26.0000T | Abracon Corporation |
| 0 | |||
| AMMLPVBVJS-26.0000T | Abracon Corporation |
| 0 | |||
| AMMLPABLJS-26.0000T | Abracon Corporation |
| 0 | |||
| AMMLPFLBVCS-26.0000T | Abracon Corporation |
| 0 | |||
| AMMLPABLCS-26.0000T | Abracon Corporation |
| 0 | |||
| AMMLPVAXRS-26.0000T | Abracon Corporation |
| 0 | |||
 Chip-Germany GmbH | SS26-0B00-02 | Broadcom Limited | 10,000 | |||
| S26KS256SDPBHV023 | 5,000 | |||||
| S26KS256SDPBHB020 | 5,000 | |||||
| MAX6314US26D4 | Maxim Integrated Products | 10 | ||||
 Component Electronics, Inc | WP7104-GS26 | Kingbright | IN STOCK SHIP TODAY | 2,000 | ||
| DS26S10CV | National Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant | 750 | |||
| DS26C32ATM | National Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 714 | ||
| DS26C31TN | National Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 180 | ||
| MPZ1608S260ATAH0 | TDK Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 100 | ||
| DS26C32ACN | National Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant | 87 | |||
| DS26C31TM | National Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 65 | ||
| CGS262T350X5C3PL | Mallory Sonalert Products Inc | IN STOCK SHIP TODAY |
| 60 | ||
| DS26LS32ACN | National Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 34 | ||
| IDS-26 | RN | IN STOCK SHIP TODAY |
| 20 | ||
| PS2-61 | Keyence Corporation | IN STOCK SHIP TODAY |
| 5 | ||
| DS26C32ATMX | National Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 4 | ||
| HFS26R129N | Thomas & Betts | IN STOCK SHIP TODAY RoHS : Unknown | 4 | |||
| RIS-26 | Curtis Industries | IN STOCK SHIP TODAY |
| 3 | ||
| DS26F33MF-S | National Semiconductor Corporation | IN STOCK SHIP TODAY | 3 | |||
 DB Roberts | 8122-632-SS-26 | RAF Electronic Hardware | 0 | |||
| 8172-1032-SS-26 | RAF Electronic Hardware | 0 | ||||
| M0720-5-S-26 | RAF Electronic Hardware | 0 | ||||
| M3396-S-26 | RAF Electronic Hardware | 0 | ||||
| 1217-25-S-26 | RAF Electronic Hardware | 0 | ||||
| 0394-SS-26 | RAF Electronic Hardware | STAINLESS STEEL KNURLED HEAD CAPTIVE SCREW / ASSEMBLY | 0 | |||
| 7102-SS-26 | RAF Electronic Hardware | 0 | ||||
| 8058-440-S-26 | RAF Electronic Hardware | 0 | ||||
| 0107-SS-26 | RAF Electronic Hardware | 0 | ||||
| 2030-080-SS-26 | RAF Electronic Hardware | 0 | ||||
| 2065-440-SS-26 | RAF Electronic Hardware | 0 | ||||
| M2140-3005-SS-26 | RAF Electronic Hardware | 0 | ||||
| 1004-125-SS-26 | RAF Electronic Hardware | 0 | ||||
| 0453-SS-26 | RAF Electronic Hardware | 0 | ||||
| 1031-187-SS-26 | RAF Electronic Hardware | 0 | ||||
 EBV Elektronik | SS26-E3/52T | Vishay Intertechnologies | 2A 60V SMB SM SCHOTTKY RECT (Alt: SS26-E3/52T) RoHS : Compliant | 445,500 | ||
| 19-217/GHC-YR1S2/6T | Everlight Electronics Co Ltd | (Alt: S10B017470) RoHS : Compliant | 18,000 | |||
| SS26SHE3_B/H | Vishay Intertechnologies | Diode Schottky 60V 2A 2Pin DO214AC TR (Alt: SS26SHE3_B/H) RoHS : Compliant | 16,200 | |||
| SS26T3G | onsemi | Schottky Rectifier 60 V 2 A Single DO214AA SMB 2 Pins 630 mV (Alt: SS26T3G) RoHS : Compliant | 12,500 | |||
| SS26H | Taiwan Semiconductor | Diode Schottky 60V 2A 2Pin DO214AA TR (Alt: SS26H) RoHS : Compliant | 9,000 | |||
| TSSS2600 | Vishay Intertechnologies | (Alt: TSSS2600) RoHS : Compliant | 5,000 | |||
| MBRS260T3G | onsemi | Schottky Rectifier 60 V 2 A Single DO214AA SMB 2 Pins 630 mV (Alt: MBRS260T3G) RoHS : Compliant | 2,500 | |||
| CY8C4746LQS-S263 | Infineon Technologies AG | MCU 32Bit CY8C4746 ARM CortexM0 RISC 64KB Flash 171V to 55V 40Pin QFN Tray (Alt: SP005650575) RoHS : Compliant | 2,450 | |||
| S26KS256SDPBHI020 | Infineon Technologies AG | (Alt: SP005653893) RoHS : Compliant | 1,690 | |||
| S26HS512TGABHB000 | Infineon Technologies AG | NOR Flash 512Mbit 64M X 8bit SPI 18V 9ns 24Pin BGA Tray (Alt: SP005655835) RoHS : Compliant | 338 | |||
| MFS2630AMDA0AD | NXP Semiconductors | (Alt: MFS2630AMDA0AD) RoHS : Compliant | 250 | |||
| VS-26MT20 | Vishay Intertechnologies | Diode Rectifier Bridge Single 200V 25A 5Pin Case D63 (Alt: VS-26MT20) RoHS : Compliant | 0 | |||
| SS26-M3/5BT | Vishay Intertechnologies | 2A 60V SMB SM SCHOTTKY RECT (Alt: SS26-M3/5BT) RoHS : Compliant | 0 | |||
| SS26HE3_A/H | Vishay Intertechnologies | Diode Schottky Barrier Rectifier 60V 2A 2Pin DO214AA Plastic TR (Alt: SS26HE3_A/H) RoHS : Compliant | 0 | |||
| S26KS256SDGBHV030 | Infineon Technologies AG | NOR Flash 256Mbit 32M X 8Bit 3V 24Pin FBGA Tray (Alt: SP005653293) RoHS : Compliant | 0 | |||
 FDH Electronics | DTS26T23-55PE-LC | TE Connectivity | Connector |
| 164 | |
| NGT805HE-S2-6 | BURNDY | Identification | 156 | |||
| DTS26W09-98SN | TE Connectivity | Connector RoHS : Compliant |
| 90 | ||
| DTS26T09-35SD | TE Connectivity | Connector RoHS : Compliant |
| 83 | ||
| DTS26T09-98BB | TE Connectivity | Connector |
| 45 | ||
| DTS26F23-55PE-LC | TE Connectivity | Connector |
| 15 | ||
| DTS26W09-35AA | TE Connectivity | Connector |
| 6 | ||
| DTS26T23-35AD | TE Connectivity | Connector |
| 3 | ||
| DTS26F19-32PE-LC | TE Connectivity | Connector |
| 2 | ||
| DTS26F21-35PC | TE Connectivity | Connector |
| 2 | ||
| DTS26T19-32PE-LC | TE Connectivity | Connector |
| 1 | ||
| MS26574-7.5 | Crouzet | Circuit Protect |
| 0 | ||
| MS26574-10 | Safran Electrical & Power UK | Circuit Breaker | 0 | |||
| MS26574-10 | Crouzet | Circuit Protect |
| 0 | ||
| MS26574-51L | Safran Electrical & Power UK | Circuit Breaker | 0 | |||
 Flip Electronics | A2T18S260-12SR3 | NXP Semiconductors | Stock RoHS : Compliant | 22,000 | ||
| S26HS512TGABHI000 | Infineon Technologies AG | Stock, Ship Today RoHS : Compliant |
| 18,733 | ||
| LPC55S26JEV98K | NXP Semiconductors | Stock, Ship Today RoHS : Compliant |
| 14,248 | ||
| S26KL512SDABHI033 | Cypress Semiconductor | Stock | 7,657 | |||
| S26KL512SDABHV030 | Cypress Semiconductor | Stock, Ship Today RoHS : Compliant | 7,066 | |||
| S26HL512TFPBHI003 | Infineon Technologies AG | Stock RoHS : Compliant | 2,500 | |||
| S26KS128SDPBHN020 | Cypress Semiconductor | Stock, Ship Today RoHS : Compliant | 2,477 | |||
| S26KS256SDPBHN023 | Cypress Semiconductor | Stock | 2,019 | |||
| S26KS256SDGBHV030 | Cypress Semiconductor | Stock RoHS : Compliant | 1,947 | |||
| S26KL128SDABHV020 | Cypress Semiconductor | Stock, Ship Today RoHS : Compliant | 1,637 | |||
| S26KS128SDGBHN030 | Infineon Technologies AG | Stock, Ship Today RoHS : Compliant |
| 752 | ||
| S26KL128SDABHI023 | Cypress Semiconductor | Stock | 574 | |||
| S26HL512TFPBHV000 | Infineon Technologies AG | Stock RoHS : Compliant | 338 | |||
| S26KS256SDPBHV023 | Cypress Semiconductor | Stock | 277 | |||
| S26KS512SDGBHV033 | Cypress Semiconductor | Stock | 257 | |||
 Maritex | HL-PYT-1005S26YC-04 | Hongli Zhihui Group Co LTD | LED SMD; case 0402; amber; 586-595nm; 35-50mcd/5mA; 1.7-2.3V; water clear lens; 130 degrees; 1.0x0.5x0.4mm /6000 |
| 29,900 | |
TPS26600RHFR | Texas Instruments | Power Management ICs (PMICs); TPS26600RHFR; TEXAS INSTRUMENTS; 24; 5 mm; 0 m; VQFN RoHS : Compliant |
| 3,213 | ||
| MURS260T3G | onsemi | Rectifier Diodes & Bridges; MURS260T3G; ON SEMICONDUCTOR; 2; 2 A; 600 V; 5 �A RoHS : Compliant |
| 3,034 | ||
DS26C32ATMX/NOPB | Texas Instruments | Other Interface ICs; DS26C32ATMX/NOPB; TEXAS INSTRUMENTS; 16; 5.5 V; 4.5 V; SOIC RoHS : Compliant |
| 2,355 | ||
| TGS2611-C00 | FIGARO Engineering Inc | MOS-type methane gas sensor; range: 1-25%LEL; supply: 5V; power: 280mW |
| 1,804 | ||
TPS26625DRCR | Texas Instruments | Power Management ICs (PMICs); TPS26625DRCR; TEXAS INSTRUMENTS; 10; 1 mm; 3 mm RoHS : Compliant |
| 1,760 | ||
| TGS2610-C00 | FIGARO Engineering Inc | MOS-type propane, butane gas sensor; range: 1-25%LEL; supply: 5V; power: 280mW |
| 1,166 | ||
| PBMS26S-CT | CONNTHERM | Pin Header; pitch 2.00mm; 1x26 pins; assembly: THT; female; straight; single row |
| 901 | ||
| TGS2610-D00 | FIGARO Engineering Inc | MOS-type propane, butane gas sensor; range: 1-25%LEL; supply: 5V; power: 280mW; filter built-in |
| 646 | ||
| TGS2611-E00 | FIGARO Engineering Inc | MOS-type methane gas sensor; range: 1-25%LEL; supply: 5V; power: 280mW; filter built-in |
| 626 | ||
| SS26T3G | onsemi | Rectifier Diodes & Bridges; SS26T3G; ON SEMICONDUCTOR; 2; 2 A; 60 V; 200 �A RoHS : Compliant |
| 129 | ||
| USB-C24STS26 | WELINK Technology Co Ltd | USB-Type C, 24 circuits socket SMT, stainless steel nickel plated shell, DIP top mount; straight, gold plated contacts; 5A |
| 88 | ||
| TGS2602 | FIGARO Engineering Inc | MOS-type air pollutants gas sensor; range: 1-30ppm C2H5OH; supply: 5V; power: 280mW |
| 34 | ||
| TGS2620 | FIGARO Engineering Inc | MOS-type ethanol gas sensor; range: 50-5000ppm; supply: 5V; power: 210mW |
| 29 | ||
| NS-26CW108-XHEQ38A2 | NiViss | MCPCB module; aluminium 5052; circle 108mm; 26 x XPEHEW-L1-00BE8; warm white; Q3; 8A2; cable red; blue 25cm; RoHS |
| 6 | ||
 Master Electronics | IDSS-26-S-26.63 | Samtec Inc | RoHS : Compliant |
| 0 | |
| MTSW-124-24-S-S-260 | Samtec Inc | .100 Variable Post Height Terminal Strip RoHS : Compliant |
| 0 | ||
| NCP163AFCS260T2G | onsemi | LDO Regulator 250 mA Ultra-High PSRR Ultra-Low Noise 2.6 V Active Discharge RoHS : Compliant |
| 0 | ||
| YDTS26F11-98JNV001 | TE Connectivity | PLUG ASSY RoHS : Compliant |
| 0 | ||
| YDTS26F13-08SAV004 | TE Connectivity | PLUG ASSY MOQ Reduction RoHS : Compliant |
| 0 | ||
| YDTS26F15-15SNV001 | TE Connectivity | PLUG ASSY MOQ Reduction RoHS : Compliant |
| 0 | ||
| YDTS26F19-35SAC001 | TE Connectivity | PLUG ASSY MOQ Reduction RoHS : Compliant |
| 0 | ||
| YDTS26F19-35SBV001 | TE Connectivity | PLUG ASSY MOQ Reduction RoHS : Compliant |
| 0 | ||
| YDTS26F23-35PAV004 | TE Connectivity | PLUG ASSY MOQ Reduction RoHS : Compliant |
| 0 | ||
| YDTS26F23-35SAV001 | TE Connectivity | PLUG ASSY MOQ Reduction RoHS : Compliant |
| 0 | ||
| YDTS26G13-35PNV001 | TE Connectivity | DTS PLUG ENVELOPE MOQ Reduction RoHS : Compliant |
| 0 | ||
| YDTS26G19-32PAV001 | TE Connectivity | DTS PLUG ENVELOPE MOQ Reduction RoHS : Compliant |
| 0 | ||
| YDTS26T13-35SBV001 | TE Connectivity | PLUG ASSY MOQ Reduction RoHS : Compliant |
| 0 | ||
| YDTS26T17-06SAC001 | TE Connectivity | PLUG ASSY MOQ Reduction RoHS : Compliant |
| 0 | ||
| YDTS26W09-98PNV001 | TE Connectivity | PLUG ASSY MOQ Reduction RoHS : Compliant |
| 0 | ||
 Neutron USA | B82725S2602N041 | TDK Corporation | Common Mode Chokes / Filters RING CORE CHOKE 2x7.8mH 6.0A RoHS : Compliant |
| 50 | |
| XS26-2E | Banner Engineering Corp | Safety Controller, Expandable, 26 Safe In, 8 Convert In, 4 Indep contrl Safe Out, 2 OSSD Pairs, 11 Non Safe Out PNP, 24Vdc, 85063 |
| 50 | ||
| ATS-HP-D3L70S26W-111 | Advanced Thermal Solutions Inc | Heat Sinks Heat Pipe, Copper, High Performance, Round, 70mm, 3mm dia. |
| 50 | ||
| 2AS2-6 | Altech Corporation | Switch Actuators Selec. Opr.,22 mm,3 Pos., |
| 19 | ||
| VS26S511DF213A | Norgren | Valve, 5/2, sol/sol, 24VDC, lock, soft seal spool |
| 11 | ||
| VS26SB11DF213A | Norgren | Valve, 2X3/2 NO, sol/spring rtn, int pilot, 3-10 bar, 24VDC, push/turn override |
| 7 | ||
| VS26S611DF213A | Norgren | Norgren VS26S611DF213A Solenoid Valve Island, 24 VDC, 2 to 10 bar, 5/3, VS26 Series |
| 6 | ||
| XS26-ISDD | Banner Engineering Corp | Safety Controllers XS26-ISDd Safety Controller: Expandable; ISD Compatible (8 ISD Chains) 26 Input 2 pairs of PNP Safety Outputs (0.5 A each); Display; Ethernet USB; 8 Convertible Inputs; Removable Screw Terminals 24 V dc; 160 mA |
| 3 | ||
| M2SS2-60B01 | ABB Low Voltage Products and Systems | 2POS KNOB A-C BLK CMR 1NC MAIN |
| 3 | ||
| S26361-F3781-E516-AX | Axiom Manufacturing | AXIOM 16GB DDR3-1600 LOW VOLTAGE ECC RDIMM FOR FUJITSU - S26361-F3781-E516, TOP |
| 0 | ||
| AFS26-30-22-13 | ABB Low Voltage Products and Systems | SAFETY CONTACTOR, 3P 690V, Aux: 2NO2NC, Control: 100-250VAC/DC, 45 A (AC-1) |
| 0 | ||
| PS263 | Black Box Corporation | BUY THIS BLACK BOX USB ENTENDER POWER SUPPLY TO ADD REDUNDANCY TO YOUR USB EXTEN |
| 0 | ||
| XS26-2DE, 85064 | Banner Engineering Corp | Safety Controllers XS26-2DE Safety Controller: Expandable; 26 Input; 2 pairs of PNP Safety Outputs (0.5 A each); Display; Ethernet; USB; 8 Convertible Inputs; Removable Screw Terminals; 24 V dc; 160 mA |
| 0 | ||
| TS-262-4G-US | Qnap Systems Inc | QNAP 2BAY DESKTOP NAS INTEL CEL INTEL N4505 2C/2T |
| 0 | ||
| PS26PD32WCAM | Eaton Corporation | SAFE-IT POWER STRIP 2-OUTLET 32W 5-15R 2 USB-A USB C CHARGING |
| 0 | ||
 Pasternack Enterprises US | PE3C2346/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Male to TNC Male Low Loss Cable 60 Inch Length Using LMR-240 Coax With Times Microwave Components with Double HeatShrink., Radio frequency assembly N male to TNC male low loss cable 60 inch length using LMR-240 coax with Times Microwave components with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to TNC male low loss cable 60 inch length using LMR-240 coax with Times Microwave components with double heatshrink, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and TNC cable connection on the other. Our low loss N type to TNC cable assemblies have a male gender on end 1 and male on end 2. PE3C2346/HS2-60 can also be known as a low loss N type plug to TNC plug cable assembly and will be shipped same-day as it is purchased. Type N plug to TNC plug cable assembly PE3C2346/HS2-60 is built with LMR-240 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2346/HS2-60 can also be used in the other direction and will be TNC male to N type male cable assembly if the opposite connectivity is required. Low loss type N plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to TNC male low loss cable 60 inch length using LMR-240 coax with Times Microwave components with double heatshrink. |
| 4,296 | |
| PE3C0053/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Male to N Male Low Loss Cable 60 Inch Length Using LMR-240 Coax with Double Heatshrink., Radio frequency assembly N male to N male low loss cable 60 inch length using LMR-240 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 60 inch length using LMR-240 coax with double heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and type N cable connection on the other. Our low loss type N to N type cable assemblies have a male gender on end 1 and male on end 2. PE3C0053/HS2-60 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped same-day as it is purchased. N type plug to N type plug cable assembly PE3C0053/HS2-60 is built with LMR-240 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N male to N type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss N type plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male low loss cable 60 inch length using LMR-240 coax with double heatshrink. |
| 2,168 | ||
| PE3C1135/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. TNC Male to TNC Male Low Loss Cable 60 Inch Length Using LMR-240-UF Coax with Times Microwave Components with Double HeatShrink., Radio frequency assembly TNC male to TNC male low loss cable 60 inch length using LMR-240-UF coax with Times Microwave components with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to TNC male low loss cable 60 inch length using LMR-240-UF coax with Times Microwave components with double heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with TNC cable connection on one end and TNC cable connection on the other. Our low loss TNC to TNC cable assemblies have a male gender on end 1 and male on end 2. PE3C1135/HS2-60 can also be known as a low loss TNC plug to TNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC plug cable assembly PE3C1135/HS2-60 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohms impedance and is double shielded. RF specs on this 6 GHz maximum frequency TNC male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss TNC plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to TNC male low loss cable 60 inch length using LMR-240-UF coax with Times Microwave components with double heatshrink. |
| 2,148 | ||
| PE3C3196/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. SMA Female to N Male Low Loss Cable 60 Inch Length Using LMR-195 Coax with Double HeatShrink., Radio frequency assembly SMA female to N male low loss cable 60 inch length using LMR-195 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA female to N male low loss cable 60 inch length using LMR-195 coax with double heatshrink, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and type N cable connection on the other. Our low loss SMA to type N cable assemblies have a female gender on end 1 and male on end 2. PE3C3196/HS2-60 can also be known as a low loss SMA jack to N type plug cable assembly and will be shipped same-day as it is purchased. SMA jack to type N plug cable assembly PE3C3196/HS2-60 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SMA female to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C3196/HS2-60 can also be used in the other direction and will be N type male to SMA female cable assembly if the opposite connectivity is required. Low loss SMA jack to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female to N male low loss cable 60 inch length using LMR-195 coax with double heatshrink. |
| 814 | ||
| PE3C6334/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: UHF, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Male Right Angle to UHF Male Low Loss Cable 60 Inch Length Using LMR-195 Coax with Double HeatShrink., Radio frequency assembly N male right angle to UHF male low loss cable 60 inch length using LMR-195 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male right angle to UHF male low loss cable 60 inch length using LMR-195 coax with double heatshrink, N type cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to UHF cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle type N cable connection on one end and UHF cable connection on the other. Our low loss right angle type N to UHF cable assemblies have a male gender on end 1 and male on end 2. PE3C6334/HS2-60 can also be known as a low loss right angle N type plug to UHF plug cable assembly and will be shipped same-day as it is purchased. Type N plug to UHF plug cable assembly PE3C6334/HS2-60 is built with LMR-195 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with right angle type N to UHF cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 300 MHz maximum frequency N type right angle male to UHF male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6334/HS2-60 can also be used in the other direction and will be UHF male to right angle type N male cable assembly if the opposite connectivity is required. Low loss type N right angle plug to UHF plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to UHF cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male right angle to UHF male low loss cable 60 inch length using LMR-195 coax with double heatshrink. |
| 507 | ||
| PE3C6335/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: UHF, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Male Right Angle to UHF Female Low Loss Cable 60 Inch Length Using LMR-195 Coax with Double HeatShrink., Radio frequency assembly N male right angle to UHF female low loss cable 60 inch length using LMR-195 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male right angle to UHF female low loss cable 60 inch length using LMR-195 coax with double heatshrink, N type cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to UHF cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle type N cable connection on one end and UHF cable connection on the other. Our low loss right angle type N to UHF cable assemblies have a male gender on end 1 and female on end 2. PE3C6335/HS2-60 can also be known as a low loss right angle N type plug to UHF jack cable assembly and will be shipped same-day as it is purchased. Type N plug to UHF jack cable assembly PE3C6335/HS2-60 is built with LMR-195 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with right angle type N to UHF cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 300 MHz maximum frequency type N right angle male to UHF female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6335/HS2-60 can also be used in the other direction and will be UHF female to right angle type N male cable assembly if the opposite connectivity is required. Low loss N type right angle plug to UHF jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to UHF cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male right angle to UHF female low loss cable 60 inch length using LMR-195 coax with double heatshrink. |
| 279 | ||
| PE3C2368/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Silver, RF Cable Part Number: LMR-400-DB, RF Cable Type: LMR-400-DB, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. TNC Male RA to TNC Male RA Low Loss Cable 60 Inch Length Using LMR-400-DB Coax With Times Microwave Components with Double HeatShrink., Radio frequency assembly TNC male RA to TNC male RA low loss cable 60 inch length using LMR-400-DB coax with Times Microwave components with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male RA to TNC male RA low loss cable 60 inch length using LMR-400-DB coax with Times Microwave components with double heatshrink, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle TNC cable connection on one end and right angle TNC cable connection on the other. Our low loss right angle TNC to right angle TNC cable assemblies have a male gender on end 1 and male on end 2. PE3C2368/HS2-60 can also be known as a low loss right angle TNC plug to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC plug cable assembly PE3C2368/HS2-60 is built with LMR-400-DB which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to right angle TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency TNC right angle male to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss TNC right angle plug to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male RA to TNC male RA low loss cable 60 inch length using LMR-400-DB coax with Times Microwave components with double heatshrink. |
| 78 | ||
| PE35568/HS2-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. SMA Male to SMB Jack Cable 6 Inch Length Using RG316-DS Coax with Double HeatShrink., Radio frequency assembly SMA male to SMB jack cable 6 inch length using RG316-DS coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMB jack cable 6 inch length using RG316-DS coax with double heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMB cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMB cable connection on the other. Our SMA to SMB cable assembly has male gender on end 1 and jack on end 2. PE35568/HS2-6 can also be known as a SMA plug to SMB female cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. SMA plug to SMB female cable assembly PE35568/HS2-6 is built with RG316-DS which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMB cable connectors, has a 50 Ohm impedance and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE35568/HS2-6 RF cable are available on our downloadable PDF datasheet.PE35568/HS2-6 can also be used in the other direction and will be SMB jack to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMB female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMB cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE3C1609/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. SMB Plug to SMA Male Low Loss Cable 60 Inch Length Using LMR-195 Coax with Double HeatShrink., Radio frequency assembly SMB plug to SMA male low loss cable 60 inch length using LMR-195 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMB plug to SMA male low loss cable 60 inch length using LMR-195 coax with double heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMB to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMB cable connection on one end and SMA cable connection on the other. Our low loss SMB to SMA cable assemblies have a plug gender on end 1 and male on end 2. PE3C1609/HS2-60 can also be known as a low loss SMB male to SMA plug cable assembly and will be shipped same-day as it is purchased. SMB male to SMA plug cable assembly PE3C1609/HS2-60 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with SMB to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency SMB plug to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1609/HS2-60 can also be used in the other direction and will be SMA male to SMB plug cable assembly if the opposite connectivity is required. Low loss SMB male to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMB to SMA cable assembly for quick shipment worldwide. Variations of SMB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMB plug to SMA male low loss cable 60 inch length using LMR-195 coax with double heatshrink. |
| 0 | ||
| PE3C6004/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-200, RF Cable Type: LMR-200, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. SMA Male Right Angle to TNC Male Right Angle Low Loss Cable 60 Inch Length Using LMR-200 Coax with Double HeatShrink., Radio frequency assembly SMA male right angle to TNC male right angle low loss cable 60 inch length using LMR-200 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male right angle to TNC male right angle low loss cable 60 inch length using LMR-200 coax with double heatshrink, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle SMA cable connection on one end and right angle TNC cable connection on the other. Our low loss right angle SMA to right angle TNC cable assemblies have a male gender on end 1 and male on end 2. PE3C6004/HS2-60 can also be known as a low loss right angle SMA plug to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to TNC plug cable assembly PE3C6004/HS2-60 is built with LMR-200 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA right angle male to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6004/HS2-60 can also be used in the other direction and will be right angle TNC male to right angle SMA male cable assembly if the opposite connectivity is required. Low loss SMA right angle plug to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to TNC male right angle low loss cable 60 inch length using LMR-200 coax with double heatshrink. |
| 0 | ||
| PE3C2887/HS2-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P047, RF Cable Type: PE-P047, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. Mini SMP Female Right Angle to SMA Male Cable 6 Inch Length Using PE-P047 Coax with Double HeatShrink., Radio frequency assembly mini SMP female right angle to SMA male cable 6 inch length using PE-P047 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Mini SMP female right angle to SMA male cable 6 inch length using PE-P047 coax with double heatshrink, mini SMP cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom mini SMP to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle mini SMP cable connection on one end and SMA cable connection on the other. Our right angle mini SMP to SMA cable assemblies have a female gender on end 1 and male on end 2. This mini SMP to SMA cable is a female to male coax assembly, PE3C2887/HS2-6, can also be known as a right angle mini SMP jack to SMA plug cable assembly and will be shipped same-day as it is purchased. Mini SMP jack to SMA plug cable assembly PE3C2887/HS2-6 is built with PE-P047 which is a flexible coax type. The Pasternack flexible Mini SMP cable assembly is manufactured with right angle mini SMP to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 12 GHz maximum frequency mini SMP right angle female to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2887/HS2-6 can also be used in the other direction and will be SMA male to right angle mini SMP female cable assembly if the opposite connectivity is required. Mini SMP right angle jack to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality mini SMP to SMA cable assembly for quick shipment worldwide. Variations of mini SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this mini SMP female right angle to SMA male cable 6 inch length using PE-P047 coax with double heatshrink. |
| 0 | ||
| PE3C1041/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Male to TNC Male Right Angle Low Loss Cable 60 Inch Length Using PE-P142LL Coax with Double HeatShrink., Radio frequency assembly N male to TNC male right angle low loss cable 60 inch length using PE-P142LL coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to TNC male right angle low loss cable 60 inch length using PE-P142LL coax with double heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type cable connection on one end and right angle TNC cable connection on the other. Our low loss type N to right angle TNC cable assemblies have a male gender on end 1 and male on end 2. PE3C1041/HS2-60 can also be known as a low loss type N plug to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. N type plug to TNC plug cable assembly PE3C1041/HS2-60 is built with PE-P142LL which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to right angle TNC cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency N type male to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1041/HS2-60 can also be used in the other direction and will be right angle TNC male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to TNC male right angle low loss cable 60 inch length using PE-P142LL coax with double heatshrink. |
| 0 | ||
| PE3C7527/HS2-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P086, RF Cable Type: PE-P086, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. Mini SMP Female Right Angle to SMA Female Bulkhead Cable 6 Inch Length Using PE-P086 Coax with Double HeatShrink., Radio frequency assembly mini SMP female right angle to SMA female bulkhead cable 6 inch length using PE-P086 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The mini SMP female right angle to SMA female bulkhead cable 6 inch length using PE-P086 coax with double heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom mini SMP to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle mini SMP cable connection on one end and a SMA bulkhead cable connection on the other. Our right angle mini SMP to SMA cable assembly has a female gender on end 1 and a female on end 2. PE3C7527/HS2-6 can also be known as a right angle mini SMP jack to SMA jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C7527/HS2-6 RF cable has a FEP jacket of 0.104-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 110 dB. Our right angle Mini SMP female to bulkhead SMA female cable has a maximum VSWR of 1.4:1. Mini SMP jack to SMA jack cable assembly PE3C7527/HS2-6 is built with PE-P086 which is a flexible coax type. The Pasternack flexible Mini SMP cable assembly is manufactured with right angle mini SMP to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the solder attachment method and a brass body with gold plating, while the other has the solder/solder attachment method and a brass body with gold over nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C7527/HS2-6 can also be used in the other direction and will be a SMA female bulkhead to right angle mini SMP female cable assembly if the opposite connectivity is required. Mini SMP right angle jack to SMA jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality mini SMP to SMA cable assembly for quick shipment worldwide. Variations of mini SMP and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal Mini SMP to SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE3W12598/HS2-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMC, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMB, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. SMC Plug to SMB Plug Right Angle Cable 6 Inch Length Using RG178 Coax with Double HeatShrink., Radio frequency assembly SMC plug to SMB plug right angle cable 6 inch length using RG178 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMC plug to SMB plug right angle cable 6 inch length using RG178 coax with double heatshrink, SMC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMC to SMB cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMC cable connection on one end and right angle SMB cable connection on the other. Our SMC to right angle SMB cable assemblies have a plug gender on end 1 and plug on end 2. PE3W12598/HS2-6 can also be known as a SMC male to right angle SMB male cable assembly and will be shipped same-day as it is purchased. SMC male to SMB male cable assembly PE3W12598/HS2-6 is built with RG178 which is a flexible coax type. The Pasternack flexible SMC cable assembly is manufactured with SMC to right angle SMB cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency SMC plug to SMB right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W12598/HS2-6 can also be used in the other direction and will be right angle SMB plug to SMC plug cable assembly if the opposite connectivity is required. SMC male to SMB right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMC to SMB cable assembly for quick shipment worldwide. Variations of SMC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMC plug to SMB plug right angle cable 6 inch length using RG178 coax with double heatshrink. |
| 0 | ||
| PE3W00029/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Female Bulkhead to N Female Bulkhead Low Loss Cable 60 Inch Length Using LMR-400 Coax with Double HeatShrink., Radio frequency assembly N female bulkhead to N female bulkhead low loss cable 60 inch length using LMR-400 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N female bulkhead to N female bulkhead low loss cable 60 inch length using LMR-400 coax with double heatshrink, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N bulkhead cable connection on one end and type N bulkhead cable connection on the other. Our low loss N type to type N cable assemblies have a female gender on end 1 and female on end 2. PE3W00029/HS2-60 can also be known as a low loss N type jack to type N jack cable assembly and will be shipped same-day as it is purchased. Type N jack to type N jack cable assembly PE3W00029/HS2-60 is built with LMR-400 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency type N female bulkhead to type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss type N jack bulkhead to type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N female bulkhead to N female bulkhead low loss cable 60 inch length using LMR-400 coax with double heatshrink. |
| 0 | ||
 Teledyne HiRel | DM54LS260J/883 | Teledyne HiRel | NOR GATE, DUAL 5-INPUT | 0 | ||
| DM54LS260E/883 | Teledyne HiRel | NOR GATE, DUAL 5-INPUT | 0 | |||
 Vyrian | SNJ54AS264FK | Texas Instruments | Look-Ahead Carry Generator, AS Series, 4-Bit, TTL, CQCC20 RoHS : Not Compliant | 9,671 | ||
| SN74AS2623JP4 | Texas Instruments | Bus Driver/Transceiver, 1-Func, 8-Bit, True Output, TTL, CDIP20 RoHS : Not Compliant | 9,161 | |||
| SN54AS2623FH | Texas Instruments | Bus Driver/Transceiver, 1-Func, 8-Bit, True Output, TTL, CQCC20 RoHS : Not Compliant | 8,549 | |||
| SN74AS264NP1 | Texas Instruments | Look-Ahead Carry Generator, TTL, PDIP16 RoHS : Not Compliant | 8,007 | |||
| STS26N3LLH6 | STMicroelectronics | Power Field-Effect Transistor, 26A I(D), 30V, 0.0053ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Compliant | 7,746 | |||
| SN74AS2645FN | Texas Instruments | Bus Driver/Transceiver, 1-Func, 8-Bit, True Output, TTL, PQCC20 RoHS : Not Compliant | 7,517 | |||
| SN74AS2623DWP3 | Texas Instruments | Bus Driver/Transceiver, 1-Func, 8-Bit, True Output, TTL, PDSO20 RoHS : Not Compliant | 6,484 | |||
| SN74AS2640DWR | Texas Instruments | Bus Transceiver, AS Series, 1-Func, 8-Bit, Inverted Output, TTL, PDSO20 | 6,412 | |||
| CY8C4146LQS-S263T | Infineon Technologies AG | CMOS RoHS : Compliant | 6,145 | |||
| SN74AS2623DW3 | Texas Instruments | Bus Driver/Transceiver, 1-Func, 8-Bit, True Output, TTL, PDSO20 RoHS : Not Compliant | 5,244 | |||
| SN54S268J | Texas Instruments | D Latch, S Series, 1-Func, High Level Triggered, 6-Bit, True Output, TTL, CDIP16 RoHS : Not Compliant | 5,125 | |||
| SN74AS264D3 | Texas Instruments | Look-Ahead Carry Generator, TTL, PDSO16 RoHS : Not Compliant | 4,721 | |||
SN54LS26J | Texas Instruments | NAND Gate, LS Series, 4-Func, 2-Input, TTL, CDIP14 RoHS : Not Compliant | 3,391 | |||
| SS26V-080350 | KEMET Corporation | Single Phase EMI Filter, 250V | 837 | |||
| MURS260-A | Gulf Semiconductor | Rectifier Diode, 1 Phase, 1 Element, 2A, 600V V(RRM), Silicon, DO-214AC | 369 | |||
 Win Source Electronics | MPZ1608S260ATAH0 | TDK Corporation | FERRITE BEAD 26 OHM 0603 1LN RoHS : Compliant |
| 204,000 | |
| TPS26600RHFTG4 | Texas Instruments | TPS26600RHFTG4 Texas Instruments Digital to Analog Converters - DAC 4.2-V to 60-V 150m& Omega; 0.1-2.23A eF datasheet, inventory, & pricing. RoHS : Compliant |
| 58,250 | ||
| SS26HE3_A/H | Vishay Huntington | Diode Schottky 60V 2A Automotive 2-Pin SMB T/R / DIODE SCHOTTKY 60V 2A DO214AA |
| 51,000 | ||
DS26LV32ATM | Texas Instruments | IC LINE RVR CMOS QUAD DIF 16SOIC RoHS : Not Compliant |
| 19,720 | ||
| ISL6545CBZ-TS2694 | Intersil Corporation | IC REG CTRLR BUCK 8SOIC |
| 18,320 | ||
DS26C31TM/NOPB | Texas Instruments | DS26C31T/DS26C31M CMOS Quad TRI-STATE® Differential Line Driver RoHS : Compliant |
| 15,690 | ||
| DS26C31TMX/NOPB | Texas Instruments | IC LINE DRIVER QUAD CMOS 16-SOIC RoHS : Compliant |
| 9,490 | ||
| TPS26612DDFR | Texas Instruments | IC CURRENT REGULATOR TSOT23-8 / Current Regulator Regulator TSOT-23-8 RoHS : Compliant |
| 9,013 | ||
| DS26C32ATM | Texas Instruments | IC LINE RCVR QUAD CMOS 16-SOIC RoHS : Not Compliant |
| 8,800 | ||
| DS26C32ATMX | Texas Instruments | IC LINE RCVR QUAD CMOS 16-SOIC RoHS : Not Compliant |
| 8,180 | ||
| TPS26613DDFR | Texas Instruments | IC CURRENT REGULATOR TSOT23-8 / Current Regulator Regulator Low-Side 20mA TSOT-23-8 RoHS : Compliant |
| 8,130 | ||
| DS26C32ATM/NOPB | Texas Instruments | IC LINE RCVR QUAD CMOS 16-SOIC RoHS : Compliant |
| 7,980 | ||
| DS26LS31CMX | Texas Instruments | IC DRIVER 4/0 16SOIC / 4/0 Driver RS422, RS485 16-SOIC RoHS : Not Compliant |
| 6,800 | ||
| SISS26LDN-T1-GE3 | Vishay Huntington |
| 4,782 | |||
| TPS26601RHF | Texas Instruments | Hot Swap Voltage Controllers |
| 3,680 | ||
 Wuhan P&S | SS26HE3_A/H | Vishay Intertechnologies | Schottky Barrier Rectifier,2A,60V RoHS : Compliant |
| 19,500 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
English ▼ 
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand