| Electronic Components Datasheet Search |
|
E75ZQG-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() TME | FSE-750MA | OptiFuse | Fuse: fuse; 5x15mm; glass; 750mA; 250VAC; quick blow |
| 95 | |
| XCSTE7511 | Telemechanique Sensors | Safety switch: key operated; XCSTE; NC + NC; IP67; plastic; red |
| 6 | ||
| 1.5KE75CATR | SMC Diode Solutions | Diode: TVS; 71.3÷78.8V; 14.8A; bidirectional; DO201AD; 1.5kW; 1.5KE |
| 0 | ||
| CRT10J7E7504 | Viking Technology | Resistor: thick film; 7.5MΩ; 1210; 500mW; ±5%; CRT; -55÷155°C; 2A |
| 0 | ||
| RK73H2HTTE7502F | KOA Speer Electronics Inc | Resistor: thick film; 75kΩ; SMD; 2010; 750mW; ±1%; RK73H; 200V RoHS : Compliant |
| 0 | ||
| RK73B2HTTE750J | KOA Speer Electronics Inc | Resistor: thick film; 75Ω; SMD; 2010; 750mW; ±5%; RK73B; 200V RoHS : Compliant |
| 0 | ||
| 1.5KE75A AMP | Fagor Electrónica | Diode: TVS; 1.5kW; 75V; unidirectional; DO201AE; 1.5KE; Ammo Pack |
| 0 | ||
| MCT06030E7501BPW00 | Vishay Intertechnologies | Resistor: thin film; 7.5kΩ; SMD; 0603; 0.125W; ±0.1%; MCT0603; 0; 75V RoHS : Compliant |
| 0 | ||
| P4HE7.5A_R1_00001 | PanJit Semiconductor | Diode: TVS; 0.4kW; 8.33÷9.21V; 31A; unidirectional; SOD123HE; P4HE RoHS : Compliant |
| 0 | ||
| WME2E756J000000BR | Sweetary Industrial | Capacitor: polypropylene; 75uF; ±5%; Ø41x60mm; Leads: axial; THT |
| 0 | ||
| XL3E-750/5A | TE Connectivity | Transformer: current; Iin: 750A; Iout: 5A; 0.5@max20VA,1@max30VA |
| 0 | ||
| GRM0225C1E750JA02L | Murata Manufacturing Co Ltd | Capacitor: ceramic; MLCC; 75pF; 25V; C0G (NP0); ±5%; SMD; 01005 RoHS : Compliant |
| 0 | ||
| FLUKE-750P22 | Fluke Calibration | Module; 0÷70mbar; differential; pressure |
| 0 | ||
| 1.5KE75CA TR | Fagor Electrónica | Diode: TVS; 75V; bidirectional; DO201AE; 1.5kW; 1.5KE; reel |
| 0 | ||
| MCT06030E7500CP100 | Vishay Intertechnologies | Resistor: thin film; 750Ω; SMD; 0603; 0.125W; ±0.25%; MCT0603; 0; 75V RoHS : Compliant |
| 0 | ||
![]() Avnet Americas | M55342K06B4E75RS2 | Vishay Intertechnologies | SMD Chip Resistor, 4.75 kohm, ? 1%, 150 mW, 0805 [2012 Metric], Thin Film, Established Reliability - Tape and Reel (Alt: M55342K06B4E75RS2) RoHS : Not Compliant |
| 26,000 | |
| D55342K07B4E75RS2 | Vishay Intertechnologies | SMD Chip Resistor, 4.75 kohm, ? 1%, 250 mW, 1206 [3216 Metric], Thin Film, Established Reliability - Tape and Reel (Alt: D55342K07B4E75RS2) RoHS : Not Compliant |
| 10,000 | ||
| M55342K11B4E75RS2 | Vishay Intertechnologies | SMD Chip Resistor, 4.75 kohm, ? 1%, 50 mW, 0402 [1005 Metric], Thin Film, Established Reliability - Tape and Reel (Alt: M55342K11B4E75RS2) RoHS : Not Compliant |
| 7,500 | ||
| RNCF1206BTE75K0 | SEI Stackpole Electronics Inc | - Tape and Reel (Alt: RNCF1206BTE75K0) RoHS : Compliant |
| 5,000 | ||
| M55342H06B4E75RT5 | Vishay Intertechnologies | SMD Chip Resistor, 4.75 kohm, ? 1%, 150 mW, 0805 [2012 Metric], Thin Film, Established Reliability - Tape and Reel (Alt: M55342H06B4E75RT5) RoHS : Not Compliant |
| 5,000 | ||
| M55342K06B4E75RS3 | Vishay Intertechnologies | SMD Chip Resistor, 4.75 kohm, ? 1%, 150 mW, 0805 [2012 Metric], Thin Film, Established Reliability - Tape and Reel (Alt: M55342K06B4E75RS3) RoHS : Not Compliant |
| 5,000 | ||
| P6KE7.5CA-E3/54 | Vishay Intertechnologies | Diode TVS Single Bi-Dir 6.4V 600W 2-Pin DO-15 T/R - Tape and Reel (Alt: P6KE7.5CA-E3/54) RoHS : Compliant |
| 4,000 | ||
| M55342K12B4E75RS2 | Vishay Intertechnologies | SMD Chip Resistor, 4.75 kohm, ? 1%, 100 mW, 0603 [1608 Metric], Thin Film, Established Reliability - Tape and Reel (Alt: M55342K12B4E75RS2) RoHS : Not Compliant |
| 3,500 | ||
| M55342K06B4E75RS6 | Vishay Intertechnologies | SMD Chip Resistor, 4.75 kohm, ? 1%, 150 mW, 0805 [2012 Metric], Thin Film, Established Reliability - Tape and Reel (Alt: M55342K06B4E75RS6) RoHS : Not Compliant |
| 2,100 | ||
| UE75A206000T | Amphenol Corporation | - Tape and Reel (Alt: UE75A206000T) RoHS : Compliant |
| 2,000 | ||
| PAT0603E7502BST1 | Vishay Intertechnologies | SMD Chip Resistor, 75 kohm, ? 0.1%, 150 mW, 0603 [1608 Metric], Thin Film, Precision, PAT Series - Tape and Reel (Alt: PAT0603E7502BST1) RoHS : Compliant |
| 2,000 | ||
| D55342K07B4E75RS3 | Vishay Intertechnologies | SMD Chip Resistor, 4.75 kohm, ? 1%, 250 mW, 1206 [3216 Metric], Thin Film, Established Reliability - Tape and Reel (Alt: D55342K07B4E75RS3) RoHS : Not Compliant |
| 1,000 | ||
| RV0805E7501DBT | Vishay Intertechnologies | SMD Chip Resistor, 7.5 kOhm, ? 0.5%, 200 mW, 0805 [2012 Metric], Thin Film, High Precision - Custom Tape W/Leader (Alt: RV0805E7501DBT) RoHS : Not Compliant |
| 518 | ||
| M55342K06B4E75RWB | Vishay Intertechnologies | SMD Chip Resistor, 4.75 kohm, ? 1%, 150 mW, 0805 [2012 Metric], Thin Film, Established Reliability - Waffle Pack (Alt: M55342K06B4E75RWB) RoHS : Not Compliant |
| 400 | ||
TWAE757M060CBEZ0700![]() | Kyocera AVX Components | - Trays (Alt: TWAE757M060CBEZ0700) RoHS : Compliant |
| 6 | ||
![]() Newark | MMF204FRE75K | YAGEO Corporation | Melf Res Smd, 75K, Metal Film, 200V; |Yageo MMF204FRE75K RoHS : Compliant |
| 5,870 | |
| MMF204FRE75K | YAGEO Corporation | Melf Res Smd, 75K, Metal Film, 200V; |Yageo MMF204FRE75K RoHS : Compliant |
| 5,870 | ||
| MMF204FRE75K | YAGEO Corporation | Res, 75K, 0.4W, Minimelf 0204; |Yageo MMF204FRE75K RoHS : Compliant |
| 4,893 | ||
| MMF204FRE75K | YAGEO Corporation | Res, 75K, 0.4W, Minimelf 0204; |Yageo MMF204FRE75K RoHS : Compliant |
| 4,893 | ||
| TLE75080ESHXUMA1 | Infineon Technologies AG | Power Load Sw, High Side, -40 To 150Degc; |Infineon Technologies TLE75080ESHXUMA1 RoHS : Compliant |
| 2,072 | ||
| TLE75080ESHXUMA1 | Infineon Technologies AG | Power Load Sw, High Side, -40 To 150Degc; |Infineon Technologies TLE75080ESHXUMA1 RoHS : Compliant |
| 2,072 | ||
T495B106M025ATE750![]() | KEMET Corporation | Cap, 10Uf, 25V, Tant, Case B; |Kemet T495B106M025ATE750 RoHS : Compliant |
| 2,000 | ||
T495B106M025ATE750![]() | KEMET Corporation | Cap, 10Uf, 25V, Tant, Case B; |Kemet T495B106M025ATE750 RoHS : Compliant |
| 2,000 | ||
| MCT06030E7509BP100 | Vishay Intertechnologies | Res, 75R, 0.1%, 0.1W, 0603, Thin Film; |Vishay MCT06030E7509BP100 RoHS : Compliant |
| 924 | ||
| MCT06030E7509BP100 | Vishay Intertechnologies | Res, 75R, 0.1%, 0.1W, 0603, Thin Film; |Vishay MCT06030E7509BP100 RoHS : Compliant |
| 924 | ||
| UE75-A30-2000T | Amphenol Communications Solutions | Sfp Connector, Receptacle, 30 Position, Smd; No. Of Contacts:30Contacts; Gender:Receptacle; Connector Type:Xfp; Contact Termination Type:Surface Mount; Product Range:Ue75 Series; Connector Mounting:Pcb Mount Rohs Compliant: Yes RoHS : Compliant |
| 154 | ||
| TLE75242ESHDBTOBO1 | Infineon Technologies AG | Daughter Board, Spi Drive Relay Control; |Infineon Technologies TLE75242ESHDBTOBO1 RoHS : Compliant |
| 4 | ||
| TLE75620ESTDBTOBO1 | Infineon Technologies AG | Daughter Board, Spi Drive Relay Control; |Infineon Technologies TLE75620ESTDBTOBO1 RoHS : Compliant |
| 3 | ||
| NEBU-M12G5-E-7.5-Q8N-M1& | Festo | Sensor Cord, 5P M12 Rcpt-M12 Plug, 7.5M; |Festo NEBU-M12G5-E-7.5-Q8N-M1& RoHS : Compliant |
| 2 | ||
| E75 | Thomas & Betts | Nonins Bs Rng Term No6 Awg 1/2 Bolt |Abb Thomas & Betts E75 RoHS : Not Compliant |
| 0 | ||
![]() RS | FSE-750MA | OptiFuse | FUSE, 5 X 15MM, GLASS, FAST-ACTING, 250V, 750MA |
| 55 | |
| E750TH | Sola/Hevi-Duty | TRANSFORMER 750VA 240/415/480V PRIMARY 120/240VAC SECONDARY INTERNATIONAL SERIES |
| 38 | ||
| THINWIRE-7.5M | Stadium Group PLC | CABLE ASSEMBLIES - HDMI TO HDMI |
| 5 | ||
| EA5E750Q (75427) | Banner Engineering Corp | EMITTER, 750MM, RANGE 0.4-4M, 5MM RESOLUTION, 12-30VDC, QD, EZ-ARRAY SERIES |
| 5 | ||
| AVT03006E75R00JE3 | Vishay Dale | RESISTOR; WIREWOUND; INDUSTRIAL POWER; ADJUSTABLE TUBULAR;30W;7.5OHM;5% |
| 5 | ||
| XCSE7513 | Telemechanique Sensors | XCS-E SAFETY LIMIT SWITCH POWER TO UNLOCK 24 V AC/DC |
| 3 | ||
| LE750 | ABB Low Voltage Products and Systems | LUG HARDWARE KIT AF580-AF750 |
| 2 | ||
| XCSE7512 | Telemechanique Sensors | XCS-E SOLENOID INTERLOCK SWITCH POWER TO LOCK 24 V AC/DC |
| 2 | ||
| GAE75-10-11-81 | ABB Low Voltage Products and Systems | GAE75, 1P DC CONTR, 24VDC |
| 2 | ||
| 3125E-75 | American Beauty Tools | HEAVY-DUTY SOLDERING IRON,75 W,1/4 IN. SHANK, RIGHT ANGLE FOR ERGONOMIC COMFORT |
| 1 | ||
| T22CT 1TE75L000000 | Sifam Tinsley Precision Instrumentation Ltd | THETA CT CURRENT TRANSDUCER, TRUE RMS, 4-20 MA DC OUT., 31 MM I.D., 250A |
| 1 | ||
| FLUKE-750P27 (4352351) | Fluke Calibration | PRESSURE MODULE, 0 TO 300 (0 TO 20 BAR), (0 TO 2000 KPA) |
| 1 | ||
| FLUKE-750P03 (4352738) | Fluke Calibration | PRESSURE MODULE, 0 TO 5 (0 TO 350 MBAR), (0 TO 35 KPA) |
| 1 | ||
| FLUKE-750P00 (4352270) | Fluke Calibration | DIFFERENTIAL PRESSURE MODULE, 0 TO 1 INH2O, 0 TO 2.5 MBAR, 0 TO 0.25 KPA |
| 1 | ||
| E75 | STA-KON | NON-INSULATED LARGE BRAZED SEAM RING TERMINAL, 1.49"L X .82"W, BOLT 1/2", #6 |
| 0 | ||
![]() Microchip Technology Inc | AT30TSE752A-XM8M-T![]() | Microchip Technology Inc | 1.7-5.5V, 1MHz, Ind High Tmp, 8-MSOP, MSOP, Projected EOL: 2041-03-23 RoHS : Compliant |
| 43,498 | |
AT30TSE758A-SS8M-T![]() | Microchip Technology Inc | 1.7-5.5V, 1MHz, Ind High Tmp, 8-SOIC-N, SOIC, Projected EOL: 2041-06-04 RoHS : Compliant |
| 4,000 | ||
AT30TSE758A-XM8M-T![]() | Microchip Technology Inc | 1.7-5.5V, 1MHz, Ind High Tmp, 8-MSOP, MSOP, Projected EOL: 2040-12-10 RoHS : Compliant |
| 3,145 | ||
AT30TSE752A-SS8M-T![]() | Microchip Technology Inc | 1.7-5.5V, 1MHz, Ind High Tmp, 8-SOIC-N, SOIC, Projected EOL: 2041-03-24 RoHS : Compliant |
| 1,055 | ||
AT30TSE758A-SS8M-B![]() | Microchip Technology Inc | 1.7-5.5V, 1MHz, Ind High Tmp, 8-SOIC-N, SOIC, Projected EOL: 2041-04-18 RoHS : Compliant |
| 1,045 | ||
| MSMCJLCE75A | Microchip Technology Inc | Uni-Directional TVS _ SMCJ (DO-214AB), Projected EOL: 2049-02-05 RoHS : Compliant |
| 538 | ||
AT30TSE752A-XM8M-B![]() | Microchip Technology Inc | 1.7-5.5V, 1MHz, Ind High Tmp, 8-MSOP, MSOP, Projected EOL: 2040-12-01 RoHS : Compliant |
| 178 | ||
AT30TSE754A-SS8M-B![]() | Microchip Technology Inc | 1.7-5.5V, 1MHz, Ind High Tmp, 8-SOIC-N, SOIC, Projected EOL: 2045-12-22 RoHS : Compliant |
| 50 | ||
| MP6KE7.5A | Microchip Technology Inc | Uni-Directional TVS _ T-18, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| MXLP4KE75AE3 | Microchip Technology Inc | Uni-Directional TVS _ DO-41P, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| MSMCGLCE7.5A | Microchip Technology Inc | Uni-Directional TVS _ SMCG (DO-215AB), Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| MAP4KE75CAE3 | Microchip Technology Inc | Bi-Directional TVS _ DO-41P, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| MXSMCGLCE7.5AE3 | Microchip Technology Inc | Uni-Directional TVS _ SMCG (DO-215AB), Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| MSMCJLCE75AE3/TR | Microchip Technology Inc | Uni-Directional TVS _ SMCJ (DO-214AB), Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
AT30TSE754A-MA8M-T![]() | Microchip Technology Inc | 1.7-5.5V, 1MHz, Ind High Tmp, 8-UDFN, UDFN, Projected EOL: 2046-01-14 RoHS : Compliant |
| 0 | ||
![]() Bisco Industries | YKFAE-75416-GA | PennEngineering (PEM) | 4,668 | |||
| FRBHE-7500-12-B-4 | Howmet Aerospace | 150 | ||||
| E-750 | Bivar Inc | 102 | ||||
| SE-75 | MISC. EYELETS | 45 | ||||
| NE7512CSNP42 | MISC MAGNETS | 15 | ||||
| SE75PFR-DR0 | Panduit Corp | 1 | ||||
| SE75PFR-CR0 | Panduit Corp | RoHS : Compliant | 1 | |||
![]() Rochester Electronics | TLE75080EMHXUMA1![]() | Infineon Technologies AG | Power Distribution Switch Relay, Solenoid Driver N-Channel 8 OUT High Side 24-SOP T/R RoHS : Compliant |
| 107,000 | |
| TLE75242ESDXUMA1 | Infineon Technologies AG | Power Distribution Switch Relay, Solenoid Driver N-Channel 8 OUT High/Low Side 24-SOP T/R RoHS : Compliant |
| 220,763 | ||
| TLE75080ESHXUMA1 | Infineon Technologies AG | Power Distribution Switch Relay, Solenoid Driver N-Channel 8 OUT High Side 24-SOP T/R RoHS : Compliant |
| 8,070 | ||
| TLE75242ESHXUMA1 | Infineon Technologies AG | Power Distribution Switch Relay, Solenoid Driver N-Channel 8 OUT High Side or Low Side 24-SOP T/R RoHS : Compliant |
| 21,713 | ||
ADE7518ASTZF8![]() | Analog Devices Inc | Consumer Circuit, PQFP64 RoHS : Compliant |
| 5,673 | ||
ADE7569ASTZF16![]() | Analog Devices Inc | Analog Circuit, 1 Func RoHS : Compliant |
| 2,529 | ||
ADE7566ASTZF16-RL![]() | Analog Devices Inc | Analog Circuit, 1 Func RoHS : Compliant |
| 9,419 | ||
| AT30TSE752-MA8-T | Atmel Corporation | Temperature Sensor ICs I²C/SMBus Digital, Local 8-SON T/R RoHS : Compliant |
| 99,068 | ||
| AT30TSE752-XM8-B | Atmel Corporation | Serial Switch/Digital Sensor, 12 Bit(s), 3Cel, Square, 8 Pin, Surface Mount RoHS : Compliant |
| 24,452 | ||
| AT30TSE754-XM8-B | Atmel Corporation | Temperature Sensor ICs I²C/SMBus Digital, Local 8-SOP Tube RoHS : Compliant |
| 15,479 | ||
P6KE75A![]() | Fairchild Semiconductor Corporation | TVS Diode Zener Uni-Directional 64.1V (Max) 103V DO15 Box RoHS : Compliant |
| 2,100 | ||
| RGE7501MC | Intel Corporation | Intel E7501 Chipset Memory Controller Hub (MCH) |
| 2,024 | ||
SIT1602AC-82-18E-75.000000X![]() | SiTime Corporation | CRYSTAL OSC XO (Standard) HCMOS, LVCMOS 75MHz 1.62V ~ 1.98V ±25ppm 4-SMD T/R RoHS : Compliant |
| 221 | ||
SIT1602BI-32-18E-75.000000T![]() | SiTime Corporation | CRYSTAL OSC XO (Standard) HCMOS, LVCMOS 75MHz 1.62V ~ 1.98V ±25ppm 4-SMD T/R RoHS : Compliant |
| 4,000 | ||
| SIT8103AI-83-33E-75.00000Y | SiTime Corporation | CRYSTAL OSC XO (Standard) LVCMOS, LVTTL 75MHz 2.97V ~ 3.63V ±50ppm 4-SMD T/R RoHS : Compliant |
| 10,000 | ||
![]() Sager | PTE7500-41AG-1A400BN | Sensata Technologies | INDUSTRIAL DIGITAL PRESSURE SENSOR, 400 BAR, CANOPEN, G1/4, FKM SEAL |
| 33 | |
| E75 | ABB Group | Fixed Terminal Blocks |
| 0 | ||
| SC5E7.5K | Honeywell Sensing and Control / Clarostat | Wirewound Resistors - Through Hole SC Series, 7.5 kOhms, 5.0 W, Fixed, Wirewound Resistor | 0 | |||
ATS-21E-75-C3-R0![]() | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,FINE-PITCH,STRAIGHT, HOLE PATTERN:RIGHT-TABBED,BLUE,T412 RoHS : Compliant |
| 0 | ||
| AXE750127 | Panasonic Electronic Components | Board to Board & Mezzanine Connectors A35S(0.35mm pit RoHS : Compliant |
| 0 | ||
| CCE-75 | Eaton Bussmann | Specialty Fuses CAPAC FUSE 75A 2.4KV | 0 | |||
| KIT.SERVICE.CABLE.7500SEN0 | OMRON Electronic Components | 005, BROWN |
| 0 | ||
| A9D2N1JNNE750 | ABB Group | CL A9D2N1JNNE750 1-1/2 IN CORR PE O | 0 | |||
| AXE754127 | Panasonic Electronic Components | BOARD TO BOARD & MEZZANINE CONNECTORS RoHS : Compliant |
| 0 | ||
ATS-17E-75-C1-R0![]() | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,FINE-PITCH,STRAIGHT, HOLE PATTERN:RIGHT-TABBED,BLUE,NO TIM |
| 0 | ||
ATS-09E-75-C1-R0![]() | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,FINE-PITCH,STRAIGHT, HOLE PATTERN:RIGHT-TABBED,BLUE,NO TIM |
| 0 | ||
| AAE7544-00 | TE Connectivity | TE Connectivity 100P160-13-2-Z-WR4-01 RoHS : Compliant | 0 | |||
| C4D0203N-0816 W/LOCK CODE 7525 | Electroswitch Electronic Products | Rotary Switches | 0 | |||
| 8161J96V31QE75 | C&K Switches | Pushbutton Switches | 0 | |||
| 5CLE-750E | Eaton Bussmann | Cartridge Fuses 5.5kV 750A | 0 | |||
![]() ComSIT USA | Q120JXE7511250100T1LF | Jauch Quartz America | AVAILABLE EU | 34,109 | ||
| Q300JXE7511250100T3FULF | Jauch Quartz America | AVAILABLE EU | 8,078 | |||
| TLE75004ELD | NXP Semiconductors | AVAILABLE EU | 3,442 | |||
| MMA02040E7500BB300 | Vishay Intertechnologies | AVAILABLE EU RoHS : Compliant | 4,171 | |||
![]() ComSIT USA | SFH206E7504 | Siemens | SILICON-PIN-PHOTODIODE WITH DAYLIGHT FILTER PIN Photodiode RoHS : Not Compliant | 74,000 | ||
P4KE75A![]() | Littelfuse Inc | TVS Diode Trans Voltage Suppressor Diode, 400W, 64.1V V(RWM), Unidirectional, 1 Element, Silicon, DO-204AL RoHS : Compliant | 40,000 | |||
| LG5411TE7500 | Siemens | ORANGE SUPER BRIGHT T1 3/4 (5MM) LED LAMP Single Color LED, Orange, Colorless Clear, T-1 3/4, 5mm RoHS : Not Compliant | 18,000 | |||
| LHGBT686E7510 | OSRAM GmbH | HYPER-BRIGHT MULTI TOPLED Triple Color LED, Hyper Red/green/blue, Colorless Clear, 2.4mm RoHS : Not Compliant | 12,700 | |||
| SFH309FA5E7500 | OSRAM GmbH | Radial T1 Photo transistor Photo Transistor, 900nm, 0.015A I(C) RoHS : Not Compliant | 11,251 | |||
P6KE75A![]() | Littelfuse Inc | TVS DIODE Trans Voltage Suppressor Diode, 600W, 64.1V V(RWM), Unidirectional, 1 Element, Silicon, DO-204AC RoHS : Compliant | 4,000 | |||
| P6KE75AE354 | Vishay Intertechnologies | TRANSZORB TRANSIENT VOLTAGE SUPPRESSOR Trans Voltage Suppressor Diode, 600W, 64.1V V(RWM), Unidirectional, 1 Element, Silicon, DO-204AC RoHS : Compliant | 3,820 | |||
| 15KE75AE354 | Vishay Intertechnologies | Trans Voltage Suppressor Diode, 1500W, 6.4V V(RWM), Unidirectional, 1 Element, Silicon RoHS : Compliant | 1,400 | |||
| Q160JXE7511250100T1LF | Jauch Quartz America | Electronic Component RoHS : Compliant | 1,000 | |||
| Q160JXE752125050T1LF | Jauch Quartz America | Electronic Component RoHS : Compliant | 1,000 | |||
| UE75A206000T | TE Connectivity | SFP 20 POSITION HIGH SPEED CONNECTOR RECEPTACLE FIXED BOARD, RIGHT ANGLE SMT Telecom and Datacom Connector, 20 Contact(s), Female, Right Angle, Surface Mount Terminal, Receptacle RoHS : Compliant | 500 | |||
| F90T12NS1E757A01B1 | Nidec Corporation | Electronic Component RoHS : Not Compliant | 27 | |||
| E75W12R33 | Deutronic Elektronik GmbH | Electronic Component RoHS : Compliant | 12 | |||
EP4CE75F23I7N![]() | Altera Corporation | CYCLONE IV FPGA DEVICE FAMILY Field Programmable Gate Array, 4713 CLBs, 472.5MHz, 75408-Cell, PBGA484 RoHS : Compliant | 9 | |||
| JGE7501MC | Intel Corporation | Dynamic RAM (DRAM) Tray RoHS : Compliant | 8 | |||
![]() GLYN GmbH & Co. KG | EP4CE75F23I7N![]() | Altera Corporation | Cyclone-IVE FPGA 484-BGA -40/+85øC RoHS : Compliant | 205 | ||
![]() Interstate Connecting Components | MS3137E7-50S | TE Connectivity | CONNECTOR, PLUG, PUSH-PULL COUPLING | 0 | ||
| 233-218-CMNF21E-75SN | Glenair Inc | 0 | ||||
| MWDM1L-51GP-6E7-50S | Glenair Inc | 0 | ||||
| E75738-000 | TE Connectivity | S1189-1-120(A3)-(S15) | 0 | |||
| MWDM2L-100P-8E7-5B | Glenair Inc | RoHS : Compliant | 0 | |||
| MWDL-51S-4E7-5B | Glenair Inc | 0 | ||||
| MWDM1L-15S-6E7-50B | Glenair Inc | RoHS : Not Compliant | 0 | |||
| 233-218-07MT17E-75SN | Glenair Inc | SUPER9 HIGH SPEED PC TAIL WALL MOUNT RECPT | 0 | |||
| EE7552-000 | TE Connectivity | BAH-031500051 | 0 | |||
| FRVE754VP62419PT104MRB | ITT Interconnect Solutions | FRVE75-4VP624-19PT104-MRB | 0 | |||
| AE75-000125 | Conesys | C8944-25 | 0 | |||
| EE7546-000 | TE Connectivity | BAH-033000083 | 0 | |||
| MWDM2L-9P-6E7-54M | Glenair Inc | 0 | ||||
| E75281-077 | TE Connectivity | POLJ-24/1X70-150-CEE01 | 0 | |||
| MS3132E7-50P | TE Connectivity | 0 | ||||
![]() PEI Genesis | R58HB45E75A160 | SOURIAU-SUNBANK |
| 0 | ||
| R58HB35E75X036 | SOURIAU-SUNBANK |
| 0 | |||
| FFA.0E.750.CNS | LEMO connectors |
| 0 | |||
| FFA.1E.755.CNS | LEMO connectors |
| 0 | |||
| R58HB18E75A018 | SOURIAU-SUNBANK |
| 0 | |||
| 4120-G111-K1M1-A1S0ZE-7.5A | E-T-A |
| 0 | |||
| FFA.1E.750.CNS | LEMO connectors |
| 0 | |||
| J2CE7521-20S0A | ITT Interconnect Solutions |
| 0 | |||
| UE75A202001T | Amphenol Corporation |
| 0 | |||
| UE75A205000T | Amphenol Corporation |
| 0 | |||
| UE75-A20-6000T | Amphenol Corporation | RoHS : Compliant |
| 0 | ||
![]() PUI | FSE-750MA | 285 | ||||
![]() Chip 1 Exchange | LYT670-KE7510 | OSRAM GmbH | INSTOCK | 44,229 | ||
| LY3340-MNP-E7500 | OSRAM GmbH | INSTOCK | 23,800 | |||
| LPT670HE7510 | INSTOCK | 7,900 | ||||
| LST676-Q2-E7510 | INSTOCK | 7,500 | ||||
| P6KE75A | GII | INSTOCK | 4,000 | |||
1.5KE7.5A_AY_10001![]() | PanJit Semiconductor | INSTOCK RoHS : Compliant | 1,589 | |||
| JXE75/1-12-50/50-FU-LF | Jauch Quartz America | INSTOCK | 800 | |||
| JXE75/1 24MHZ | INSTOCK | 399 | ||||
| PHCE75C92012-X02-G | Foxconn | INSTOCK | 146 | |||
EP4CE75F23C8N![]() | Altera Corporation | INSTOCK RoHS : Compliant | 60 | |||
| E-75 | Thomas & Betts | INSTOCK | 23 | |||
EP4CE75F23C6N![]() | Altera Corporation | INSTOCK RoHS : Compliant | 20 | |||
| RGE7501MC SL6NV | INSTOCK | 3 | ||||
| RGE7501MC SL6NV | Intel Corporation | INSTOCK | 3 | |||
| FSE-750-10 | INSTOCK | 2 | ||||
![]() Avnet Abacus | MMA02040E7509BB300 | Vishay Intertechnologies | - Tape and Reel (Alt: MMA02040E7509BB300) RoHS : Compliant | 6,000 | ||
| M55342K06B4E75RS2 | Vishay Intertechnologies | SMD Chip Resistor 475 kohm 1 150 mW 0805 2012 Metric Thin Film Established Reliability (Alt: M55342K06B4E75RS2) RoHS : Not Compliant | 1,000 | |||
| UE75A206000T | Amphenol Corporation | Conn SFP RCP SMD 20 POS 08mm Solder RA SMD 20 Terminal 1 Port TR - Tape and Reel (Alt: UE75A206000T) RoHS : Compliant | 500 | |||
| TE750B12RJ | TE Connectivity | Res Wirewound 12 Ohm 5 750W 440ppmC Ceramic BoxLoose (Alt: 1-1879452-4) RoHS : Compliant | 0 | |||
| RE75N5R00C02 | Vishay Intertechnologies | (Alt: RE75N5R00C02) RoHS : Compliant | 0 | |||
| V375C15E75BG | Vicor Power | (Alt: V375C15E75BG) RoHS : Compliant | 0 | |||
| RN73C1E75RBTG | TE Connectivity | SMD Chip Resistor 75 Ohm 01 63 mW 0402 1005 Metric Thin Film (Alt: 4-1879125-9) RoHS : Compliant | 0 | |||
| RP73PF1E750RBTDF | TE Connectivity | SMD Chip Resistor 750 ohm 01 100 mW 0402 1005 Metric Thin Film High Power (Alt: 8-2176310-2) RoHS : Compliant | 0 | |||
| PAT0805E7502BSTF | Vishay Intertechnologies | SMD Chip Resistor 75 kohm 01 200 mW 0805 2012 Metric Thin Film Precision PAT Series (Alt: PAT0805E7502BSTF) RoHS : Compliant | 0 | |||
| PTN0603E7502BST1 | Vishay Intertechnologies | SMD Chip Resistor 75 kohm 01 150 mW 0603 1608 Metric Thin Film Precision PTN Series - Tape and Reel (Alt: PTN0603E7502BST1) RoHS : Compliant | 0 | |||
| RN413ASTTE75R0F50 | KOA Speer Electronics Inc | METFILM MELF 1W 1 TCR50 - Tape and Reel (Alt: RN413ASTTE75R0F50) RoHS : Compliant | 0 | |||
T495B106K010AGE750![]() | KEMET Corporation | Surface Mount Tantalum Capacitor 10 uF 10 V 1411 3528 Metric 10 750 mohm 337 mA - Tape and Reel (Alt: T495B106K010AGE750) RoHS : Compliant | 0 | |||
| MMA02040E7501BB300 | Vishay Intertechnologies | - Tape and Reel (Alt: MMA02040E7501BB300) RoHS : Compliant | 0 | |||
| GRM0225C1E750JA02L | Murata Manufacturing Co Ltd | SMD Multilayer Ceramic Capacitor 75 pF 25 V 01005 0402 Metric 5 C0G NP0 GRM Series (Alt: GRM0225C1E750JA02L) RoHS : Compliant | 0 | |||
| DCM3623E75H06A6T00 | Vicor Power | DCM3623T75H06A6T00 Isolated DC to DC Converter Evaluation Board (Alt: DCM3623E75H06A6T00) RoHS : Not Compliant | 0 | |||
![]() Avnet Asia | PHP01206E75R0BST5 | Vishay Intertechnologies | Res Thin Film 1206 75Ohm 0.1% 1W ?25ppm/?C Molded T/R (Alt: PHP01206E75R0BST5) RoHS : Compliant | 0 | ||
| PTN0603E7501BST1 | Vishay Intertechnologies | SMD Chip Resistor, 7.5 kohm, ? 0.1%, 150 mW, 0603 [1608 Metric], Thin Film, Precision, PTN Series (Alt: PTN0603E7501BST1) RoHS : Compliant | 0 | |||
| STE750-75T4MI | Vishay Intertechnologies | (Alt: STE750-75T4MI) RoHS : Compliant | 0 | |||
TWAE757M075CBEZ0700![]() | Kyocera AVX Components | (Alt: TWAE757M075CBEZ0700) RoHS : Compliant | 0 | |||
| SMDJE75A | Eaton Corporation | (Alt: SMDJE75A) RoHS : Compliant | 0 | |||
| M55342K12B4E75RS2 | Vishay Intertechnologies | SMD Chip Resistor, 4.75 kohm, ? 1%, 100 mW, 0603 [1608 Metric], Thin Film, Established Reliability (Alt: M55342K12B4E75RS2) RoHS : Compliant | 0 | |||
| M55342K12B4E75RWL | Vishay Intertechnologies | SMD Chip Resistor, 4.75 kohm, ? 1%, 100 mW, 0603 [1608 Metric], Thin Film, Established Reliability (Alt: M55342K12B4E75RWL) RoHS : Compliant | 0 | |||
| PHPA2512E75R0BST1 | Vishay Intertechnologies | Res High Power Thin Film 2512 75 Ohm 0.1% 2.5W ?25ppm/?C Molded T/R (Alt: PHPA2512E75R0BST1) RoHS : Compliant | 0 | |||
| UE75A203000T | Amphenol Corporation | Pluggable I/O Connector, SFP, 20 Contacts, 1 x 1 (Port), Surface Mount Right Angle, UE75 Series (Alt: UE75A203000T) RoHS : Compliant | 0 | |||
| M55342H12B4E75RTS | Vishay Intertechnologies | SMD Chip Resistor, 4.75 kohm, ? 1%, 100 mW, 0603 [1608 Metric], Thin Film, Established Reliability (Alt: M55342H12B4E75RTS) RoHS : Compliant | 0 | |||
| M55342K12B4E75RS6 | Vishay Intertechnologies | SMD Chip Resistor, 4.75 kohm, ? 1%, 100 mW, 0603 [1608 Metric], Thin Film, Established Reliability (Alt: M55342K12B4E75RS6) RoHS : Compliant | 0 | |||
| PHPA2512E75R0BSTS | Vishay Intertechnologies | SMD Chip Resistor, 75 Ohm, ? 0.1%, 2.5 W, 2512 [6432 Metric], Thin Film, High Power (Alt: PHPA2512E75R0BSTS) RoHS : Compliant | 0 | |||
| E757312 | Elo Touch Solutions Inc | (Alt: E757312) RoHS : Compliant | 0 | |||
| M55342K11B4E75RS6 | Vishay Intertechnologies | (Alt: M55342K11B4E75RS6) RoHS : Compliant | 0 | |||
| M55342K12B4E75RTSV | Vishay Intertechnologies | SMD Chip Resistor, 4.75 kohm, ? 1%, 100 mW, 0603 [1608 Metric], Thin Film, Established Reliability (Alt: M55342K12B4E75RTSV) RoHS : Not Compliant | 0 | |||
![]() Avnet Silica | M1.5KE7.5CAE3 | Microchip Technology Inc | (Alt: M1.5KE7.5CAE3) RoHS : Compliant | 0 | ||
| MX1.5KE7.5CAE3 | Microchip Technology Inc | (Alt: MX1.5KE7.5CAE3) RoHS : Compliant | 0 | |||
| MSMCJLCE7.5AE3/TR | Microchip Technology Inc | (Alt: MSMCJLCE75AE3/TR) RoHS : Compliant | 0 | |||
AT30TSE754A-MA8M-T![]() | Microchip Technology Inc | (Alt: AT30TSE754A-MA8M-T) RoHS : Compliant | 0 | |||
AT30TSE752A-MA8M-T![]() | Microchip Technology Inc | (Alt: AT30TSE752A-MA8M-T) RoHS : Compliant | 0 | |||
AT30TSE752A-XM8M-B![]() | Microchip Technology Inc | (Alt: AT30TSE752A-XM8M-B) RoHS : Compliant | 0 | |||
| P4KE75A_ R2 _10001 | PanJit Semiconductor | (Alt: P4KE75A_R2_10001) RoHS : Compliant | 0 | |||
AT30TSE758A-SS8M-T![]() | Microchip Technology Inc | (Alt: AT30TSE758A-SS8M-T) RoHS : Compliant | 0 | |||
AT30TSE758A-MA8M-T![]() | Microchip Technology Inc | (Alt: AT30TSE758A-MA8M-T) RoHS : Compliant | 0 | |||
| P4KE75CA_ R2 _10001 | PanJit Semiconductor | (Alt: P4KE75CA_R2_10001) RoHS : Compliant | 0 | |||
| P6KE7.5A_ R2 _10001 | PanJit Semiconductor | (Alt: P6KE7.5A_R2_10001) RoHS : Compliant | 0 | |||
| P4KE7.5CA _AY _10001 | PanJit Semiconductor | (Alt: P4KE7.5CA_AY_10001) RoHS : Compliant | 0 | |||
| 1.5KE75CA _AY _10001 | PanJit Semiconductor | (Alt: 1.5KE75CA_AY_10001) RoHS : Compliant | 0 | |||
| 1.5KE7.5CA _AY _10001 | PanJit Semiconductor | (Alt: 1.5KE7.5CA_AY_10001) RoHS : Compliant | 0 | |||
| 1.5KE7.5CA_ R2 _10001 | PanJit Semiconductor | (Alt: 1.5KE7.5CA_R2_10001) RoHS : Compliant | 0 | |||
![]() Braemac Americas-Symmetry | ANLTE7-50HRA | Multi-Tech Systems Inc | LTE Antenna, 7.75" (2 dBi). 50-pack |
| 0 | |
| ASE7-50.000MHZ-LR-T | Abracon Corporation |
| 0 | |||
| ASE7-50.000MHZ-LC-T | Abracon Corporation |
| 0 | |||
![]() Component Electronics, Inc | RK73H2ATE7503F | KOA Speer Electronics Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 20,000 | |
| RK73H2BTE7501F | KOA Speer Electronics Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 6,400 | ||
| RK73H2ATE75R0F | KOA Speer Electronics Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 4,000 | ||
| RK73B2HTTE750J | KOA Speer Electronics Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 3,900 | ||
| 1.5KE75CA | Littelfuse Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 1,000 | ||
| K50-3C1-SE75.0000MR | KYOCERA Corporation | IN STOCK SHIP TODAY | 995 | |||
| 1.5KE7.5A | Vishay Semiconductors | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 802 | ||
| 1.5KE75A-E3/54 | Vishay Intertechnologies | IN STOCK SHIP TODAY RoHS : Compliant |
| 770 | ||
| MBA0204-50-1%-PE-75R | Vishay Beyschlag | IN STOCK SHIP TODAY |
| 430 | ||
| P6KE75A-E3 | GS Battery | IN STOCK SHIP TODAY |
| 390 | ||
| 1.5KE7.5A | General Instrument | IN STOCK SHIP TODAY |
| 50 | ||
| RE75G5R00 | Ohmite Mfg Co | IN STOCK SHIP TODAY |
| 22 | ||
| PLE75039-125.0MHZ | IN STOCK SHIP TODAY | 15 | ||||
| 1.5KE7.5A | Motorola Semiconductor Products | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 11 | ||
| MS3130E7-50S | IN STOCK SHIP TODAY |
| 1 | |||
![]() DB Roberts | E-750 | Bivar Inc | ECON-O-GIDES, PRESS-IN CARD GUIDE, 7.5 IN. LENGTH, 0.078 |
| 73 | |
| SLCSE-750-3-01 | Essentra Components | Wire SdlSpacerNatural3/16 in Spc Wire Saddle Spacer Natural | 0 | |||
| SLCSE-750-4-01 | Essentra Components | 0 | ||||
![]() EBV Elektronik | BXE75T60HFHD | Bridgelux Inc | Transistor IGBT NCH 600V 150A 3Pin TO247 Tube (Alt: BXE75T60HFHD) RoHS : Compliant | 1,000 | ||
| P6KE75A | Taiwan Semiconductor | Diode TVS Single UniDirectional 641V 600W 2Pin DO204AC (Alt: P6KE75A) RoHS : Compliant | 0 | |||
| 1.5KE7.5A | Taiwan Semiconductor | Diode TVS Single UniDirectional 64V 15kW 2Pin DO201 Ammo Pack (Alt: 1.5KE7.5A) RoHS : Compliant | 0 | |||
| 1.5KE75A-E3/54 | Vishay Intertechnologies | 15KW75V 5UNIDIRAXIAL TVS (Alt: 1.5KE75A-E3/54) RoHS : Compliant | 0 | |||
| P6KE7.5A-E3/54 | Vishay Intertechnologies | Diode TVS Single UniDir 64V 600W 2Pin DO15 TR (Alt: P6KE7.5A-E3/54) RoHS : Compliant | 0 | |||
| TLE75080ESHXUMA1 | Infineon Technologies AG | SPIDER (Alt: SP001635024) RoHS : Compliant | 0 | |||
| 1.5KE7.5CAHE3_A/C | Vishay Intertechnologies | Diode TVS Single BiDir 64V 1500W 2Pin Case 15KE Paper TR (Alt: 1.5KE7.5CAHE3_A/C) RoHS : Compliant | 0 | |||
AT30TSE754A-MA8M-T![]() | Microchip Technology Inc | (Alt: AT30TSE754A-MA8M-T) RoHS : Compliant | 0 | |||
AT30TSE752A-MA8M-T![]() | Microchip Technology Inc | (Alt: AT30TSE752A-MA8M-T) RoHS : Compliant | 0 | |||
AT30TSE752A-XM8M-B![]() | Microchip Technology Inc | (Alt: AT30TSE752A-XM8M-B) RoHS : Compliant | 0 | |||
| TLE75602ESHDBTOBO1 | Infineon Technologies AG | TLE75602ESH Eight Channel LowSide and HighSide Power Switch Evaluation Board (Alt: SP002641482) RoHS : Compliant | 0 | |||
AT30TSE758A-SS8M-T![]() | Microchip Technology Inc | (Alt: AT30TSE758A-SS8M-T) RoHS : Compliant | 0 | |||
AT30TSE758A-MA8M-T![]() | Microchip Technology Inc | (Alt: AT30TSE758A-MA8M-T) RoHS : Compliant | 0 | |||
AT30TSE754A-XM8M-B![]() | Microchip Technology Inc | (Alt: AT30TSE754A-XM8M-B) RoHS : Compliant | 0 | |||
| EX-4211-EEE-7582-100M000000 | Microchip Technology Inc | EX4211EEE7582100M000000 (Alt: EX-4211-EEE-7582-100M000000) RoHS : Not Compliant | 0 | |||
![]() Master Electronics | E75 | Thomas & Betts | Ring Tongue Terminal 6AWG Electrolytic Copper 37.84mm Electro Tin RoHS : Compliant |
| 125 | |
| TE750B12RJ | TE Connectivity | TE 750W 12R 5% Bracket Tubular Resistors Fixed Resistor RoHS : Compliant |
| 4 | ||
| AXE750127 | Panasonic Electronic Components | A35S(0.35mm pit RoHS : Compliant |
| 0 | ||
| MXLP4KE75AE3 | Microchip Technology Inc | TVS 75V 5% 400W uni RoHS : Compliant |
| 0 | ||
| MXSMCGLCE7.5AE3 | Microchip Technology Inc | Low Cap TVS 7.5V 5% 1500W uni 100pF RoHS : Compliant |
| 0 | ||
| MSMCGLCE7.5A | Microchip Technology Inc | Low Cap TVS 7.5V 5% 1500W uni 100pF RoHS : Compliant |
| 0 | ||
| MSMCJLCE75AE3/TR | Microchip Technology Inc | Low Cap TVS 75V 5% 1500W uni 100pF RoHS : Compliant |
| 0 | ||
| RP73PF1E750RBTDF | TE Connectivity | RP 1E 0.1W 750R 0.1% 25PPM 1K RL RoHS : Compliant |
| 0 | ||
| MP6KE7.5A | Microchip Technology Inc | TVS 7.5V 5% 600W uni RoHS : Compliant |
| 0 | ||
| MAP4KE75CAE3 | Microchip Technology Inc | TVS 75V 5% 400W bi RoHS : Compliant |
| 0 | ||
| RN73C1E75RBTG | TE Connectivity | RN 0402 75R 0.1% 10PPM CUT LENGTH Thin Film Precision SMD Fixed Resistor RoHS : Compliant |
| 0 | ||
| FRVE75-4VP624-27PT104-MRB | ITT Interconnect Solutions | FRVE75-4VP624-27PT104-MRB RoHS : Compliant |
| 0 | ||
| A9D2N1JNNE750 | Thomas & Betts | High Density Polyethylene Duct - 1-1/2 Inch - Corrugated - 1 Way Single Split - Orange - No Stripes - 1 800 Pound Pull Tape - Length 750 Feet. RoHS : Compliant |
| 0 | ||
AT30TSE754A-MA8M-T![]() | Microchip Technology Inc | 1.7-5.5V 1MHz Ind High Tmp 8-UDFN RoHS : Compliant |
| 0 | ||
| AXE754127 | Panasonic Electronic Components | A35S(0.35mm pit RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE7532-20 | Pasternack Enterprises | Key Specifications, Design: Continuously Variable, Maximum Frequency: 4 GHz, Impedance: 50 Ohm, Power Maximum: 5 Watt, VSWR Maximum: 1.5:1, Connector Series 1: SMA, Connector Gender 1: Female, Connector Series 2: SMA, Connector Gender 2: Female, Minimum Attenuation: 0 dB, Maximum Attenuation: 20 dB, Step Type: Dial. 0 to 20 dB Variable Attenuator, SMA Female to SMA Female Rated to 5 Watts from 2 GHz to 4 GHz. PE7532-20 is a continuously variable attenuator from Pasternack. Our coaxial adjustable attenuator has an impedance of 50 Ohm and is precision manufactured to RF and microwave industry specifications. This RF variable attenuator comes with a maximum insertion loss of 0.5 dB. Make your online purchase right now to take advantage of our same-business-day shipping. Pasternack’s PE7532-20 variable RF attenuator has a SMA female connector configuration and a rotary dial for continuous attenuation level adjustment. Our PE7532-20 variable attenuator has a maximum attenuation of 20 dB. This microwave RF variable attenuator has a frequency range of 2 GHz to 4 GHz and a maximum VSWR of 1.5:1. Our continuously variable attenuator is rated to 5 Watts (CW) at the stated attenuation. Our continuously variable attenuator has an overall length of 2 inches, a width of 1.25 inches, and weighs 0.02 lbs. This radio frequency continuously variable attenuator with SMA connectors is built with aluminum. Additional dimensions and specifications for this 20 dB variable attenuator are on our downloadable PDF datasheet above. Our variable attenuator PE7532-20 is shipped the same business day as purchased from Pasternack’s facility. This attenuator is part of our RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF variable attenuator as per your requirements. |
| 8 | |
| PE7580-40 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 10 GHz, Nominal Attenuation: 40 dB, Attenuation Accuracy, Typ: 1.2 dB, VSWR, Max: 1.35:1, Input Power, Max (CW): 50 Watts, Body Material: Aluminum, Connector-In Series: N, Connector-In Gender: Male, Connector-Out Series: N, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 40 dB Fixed Attenuator, N Male to N Female Aluminum Black Anodized Body Rated to 50 Watts Up to 10 GHz. PE7580-40 is a 40 dB fixed attenuator from Pasternack. This 40 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. Pasternack’s PE7580-40 fixed attenuator is available with a typical attenuation accuracy of 1.2 dB. The max input power rating (CW) of this RF attenuator is 50 Watts. This attenuator has a maximum VSWR of 1.35:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with N-type connectors is constructed with aluminum body material and black anodized plating. The connectorized unidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 40 dB fixed attenuator has a gold-plated brass inner conductor. This N-type attenuator has a male gender on side 1 and a N-type female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 40 dB. The Pasternack PE7580-40 attenuator is rated for maximum frequency up to 10 GHz. This fixed coaxial attenuator is suitable for precision measurements, production systems, instrumentation, prototyping and characterization and 5G and 6G communications applications. The 40 dB attenuator has a brass connector built with nickel plating. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7580-40 will ship the same business day as purchased from Pasternack’s production facility. This 40 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 5 | ||
| PE7520-2 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 6 GHz, Nominal Attenuation: 2 dB, Attenuation Accuracy, Typ: 0.5 dB, VSWR, Max: 1.3:1, Input Power, Max (CW): 2 Watts, Body Material: Brass, Connector-In Series: QMA, Connector-In Gender: Male, Connector-Out Series: QMA, Connector-Out Gender: Female. 2 dB Fixed Attenuator, QMA Male to QMA Female Brass Tri-Metal Body Rated to 2 Watts Up to 6 GHz. PE7520-2 is a fixed 2 dB attenuator from Pasternack. This 2 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-day shipping. Pasternack’s PE7520-2 fixed attenuator is available with a typical attenuation accuracy of 0.5 dB. The max input power rating (CW) of this RF attenuator is 2 Watts. Our fixed radio frequency attenuator with QMA connectors is constructed with brass body material and tri-metal plating. The connectorized bidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 2 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This QMA attenuator has a male gender on side 1 and a QMA female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 2 dB. The Pasternack PE7520-2 attenuator is rated for up to 6 GHz. This coaxial attenuator is also suitable for instrumentation, precision measurements, prototyping and characterization, production systems, 5G cellular bands and DAS systems applications. The 2 dB attenuator has a brass connector built with tri-metal plating. Our fixed RF attenuator PE7520-2 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 2 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 4 | ||
| PE7580-6 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 10 GHz, Nominal Attenuation: 6 dB, Attenuation Accuracy, Typ: 0.7 dB, VSWR, Max: 1.35:1, Input Power, Max (CW): 50 Watts, Body Material: Aluminum, Connector-In Series: N, Connector-In Gender: Male, Connector-Out Series: N, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 6 dB Fixed Attenuator, N Male to N Female Aluminum Black Anodized Body Rated to 50 Watts Up to 10 GHz. PE7580-6 is a 6 dB fixed attenuator from Pasternack. This 6 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. Pasternack’s PE7580-6 fixed attenuator is available with a typical attenuation accuracy of 0.7 dB. The max input power rating (CW) of this RF attenuator is 50 Watts. This attenuator has a maximum VSWR of 1.35:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with N-type connectors is constructed with aluminum body material and black anodized plating. The connectorized unidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 6 dB fixed attenuator has a gold-plated brass inner conductor. This N-type attenuator has a male gender on side 1 and a N-type female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 6 dB. The Pasternack PE7580-6 attenuator is rated for maximum frequency up to 10 GHz. This fixed coaxial attenuator is suitable for precision measurements, production systems, instrumentation, prototyping and characterization and 5G and 6G communications applications. The 6 dB attenuator has a brass connector built with nickel plating. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7580-6 will ship the same business day as purchased from Pasternack’s production facility. This 6 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 3 | ||
| PE7502-20 | Pasternack Enterprises | Key Specifications, Design: Continuously Variable, Maximum Frequency: 18 GHz, Impedance: 50 Ohm, Power Maximum: 5 Watt, VSWR Maximum: 1.6:1, Connector Series 1: SMA, Connector Gender 1: Female, Connector Series 2: SMA, Connector Gender 2: Female, Minimum Attenuation: 0 dB, Maximum Attenuation: 20 dB, Step Type: Dial. 0 to 20 dB Variable Attenuator, SMA Female to SMA Female Rated to 5 Watts from 8 GHz to 18 GHz. PE7502-20 is a variable attenuator from Pasternack. This SMA microwave attenuator is a continuously variable attenuator design. Our coaxial 50 Ohm adjustable attenuator is precision manufactured to RF and microwave industry specifications. The Pasternack variable RF attenuator has a SMA female gender for connector 1 and a SMA female for connector 2. Our PE7502-20 variable attenuator has a maximum attenuation of 20 dB. This microwave variable attenuator has a frequency range of 8 GHz to 18 GHz and a maximum VSWR of 1.6:1. Our continuously variable attenuator is rated to 5 Watts at the stated attenuation. This variable RF attenuator has a flat attenuation accuracy of 2 dB over operating frequency range and a maximum insertion loss of 0.5 dB. Our continuously variable attenuator has an overall length of 2 inches, width of 1.25 inches, and weighs 0.02 lbs. This radio frequency continuously variable attenuator with SMA connectors is built with aluminum. Additional dimensions and specifications for this 20 dB variable attenuator are in our downloadable PDF datasheet above. Our variable attenuator PE7502-20 is shipped the same day as purchased from Pasternack's facility. This attenuator is part of our RF, microwave and millimeter-wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF variable attenuator as per your requirements. |
| 2 | ||
| PE7513-40 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connection Type: In-Series, Connector-In Impedance: 50 Ohms, Max Freq: 40 GHz, Nominal Attenuation: 40 dB, Attenuation Accuracy, Typ: 1 dB, VSWR, Max: 1.4:1, Input Power, Max (CW): 20 Watts, Body Material: Black Anodized Aluminum, Connector-In Series: 2.92mm, Connector-In Gender: Male, Connector-Out Series: 2.92mm, Connector-Out Gender: Female, Max Operating Temperature: 100 deg C, Min Operating Temperature: -55 deg C. 40 dB Fixed Attenuator, 2.92mm Male to 2.92mm Female Black Anodized Aluminum Body Rated to 20 Watts Up to 40 GHz. PE7513-40 is a 40 dB fixed attenuator from Pasternack. This 40 dB attenuator is an in-line, resistive PI attenuator pad design. This connectorized RF attenuator comes with a maximum attenuation accuracy of 2 dB. Our in-series coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. Pasternack’s PE7513-40 in-series fixed attenuator is available with a typical attenuation accuracy of 1 dB. The max input power rating (CW) of this RF attenuator is 20 Watts. This attenuator has a maximum VSWR of 1.4:1 and operates between -55 and 100 deg C. Our fixed radio frequency attenuator with 2.92mm connectors is constructed with black anodized aluminum body material. The connectorized unidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 40 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This 2.92mm attenuator has a male gender on side 1 and a 2.92mm female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 40 dB. The Pasternack PE7513-40 attenuator is rated for maximum frequency up to 40 GHz. This fixed coaxial attenuator is suitable for precision measurements, production systems, instrumentation, prototyping and characterization and 5G and 6G communications applications. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7513-40 will ship the same business day as purchased from Pasternack’s production facility. This 40 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 2 | ||
| PE7580-50 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 10 GHz, Nominal Attenuation: 50 dB, Attenuation Accuracy, Typ: 1.2 dB, VSWR, Max: 1.35:1, Input Power, Max (CW): 50 Watts, Body Material: Aluminum, Connector-In Series: N, Connector-In Gender: Male, Connector-Out Series: N, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 50 dB Fixed Attenuator, N Male to N Female Aluminum Black Anodized Body Rated to 50 Watts Up to 10 GHz. PE7580-50 is a 50 dB fixed attenuator from Pasternack. This 50 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. Pasternack’s PE7580-50 fixed attenuator is available with a typical attenuation accuracy of 1.2 dB. The max input power rating (CW) of this RF attenuator is 50 Watts. This attenuator has a maximum VSWR of 1.35:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with N-type connectors is constructed with aluminum body material and black anodized plating. The connectorized unidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 50 dB fixed attenuator has a gold-plated brass inner conductor. This N-type attenuator has a male gender on side 1 and a N-type female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 50 dB. The Pasternack PE7580-50 attenuator is rated for maximum frequency up to 10 GHz. This fixed coaxial attenuator is suitable for precision measurements, production systems, instrumentation, prototyping and characterization and 5G and 6G communications applications. The 50 dB attenuator has a brass connector built with nickel plating. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7580-50 will ship the same business day as purchased from Pasternack’s production facility. This 50 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 2 | ||
| PE7511-3 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 50 GHz, Nominal Attenuation: 3 dB, VSWR, Max: 1.45:1, Input Power, Max (CW): 5 Watts, Body Material: Aluminum, Connector-In Series: 2.4mm, Connector-In Gender: Male, Connector-Out Series: 2.4mm, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 3 dB Fixed Attenuator, 2.4mm Male to 2.4mm Female Aluminum Body Rated to 5 Watts Up to 50 GHz. PE7511-3 is a fixed 3 dB attenuator from Pasternack. This 3 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-day shipping. The max input power rating (CW) of this RF attenuator is 5 Watts. This attenuator has a maximum VSWR of 1.45:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with 2.4mm connectors is constructed with aluminum body material. The bidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 3 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This 2.4mm attenuator has a male gender on side 1 and a 2.4mm female connector on side 2. Our RF attenuator is rated for a maximum attenuation value of 3 dB. The Pasternack PE7511-3 attenuator is rated for up to 50 GHz. This coaxial attenuator is also suitable for precision measurements, production systems, instrumentation and prototyping and characterization applications. The 3 dB attenuator has a stainless steel connector built with plating. Our fixed RF attenuator PE7511-3 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 3 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 1 | ||
| PE7583-40 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 10 GHz, Nominal Attenuation: 40 dB, Attenuation Accuracy, Typ: 1.2 dB, VSWR, Max: 1.5:1, Input Power, Max (CW): 200 Watts, Body Material: Aluminum, Connector-In Series: N, Connector-In Gender: Male, Connector-Out Series: N, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 40 dB Fixed Attenuator, N Male to N Female Aluminum Black Anodized Body Rated to 200 Watts Up to 10 GHz. PE7583-40 is a 40 dB fixed attenuator from Pasternack. This 40 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. Pasternack’s PE7583-40 fixed attenuator is available with a typical attenuation accuracy of 1.2 dB. The max input power rating (CW) of this RF attenuator is 200 Watts. This attenuator has a maximum VSWR of 1.5:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with N-type connectors is constructed with aluminum body material and black anodized plating. The connectorized unidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 40 dB fixed attenuator has a gold-plated brass inner conductor. This N-type attenuator has a male gender on side 1 and a N-type female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 40 dB. The Pasternack PE7583-40 attenuator is rated for maximum frequency up to 10 GHz. This fixed coaxial attenuator is suitable for precision measurements, production systems, instrumentation, prototyping and characterization and 5G and 6G communications applications. The 40 dB attenuator has a brass connector built with nickel plating. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7583-40 will ship the same business day as purchased from Pasternack’s production facility. This 40 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 1 | ||
| PE7511-6 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 50 GHz, Nominal Attenuation: 6 dB, VSWR, Max: 1.45:1, Input Power, Max (CW): 5 Watts, Body Material: Aluminum, Connector-In Series: 2.4mm, Connector-In Gender: Male, Connector-Out Series: 2.4mm, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 6 dB Fixed Attenuator, 2.4mm Male to 2.4mm Female Aluminum Body Rated to 5 Watts Up to 50 GHz. PE7511-6 is a fixed 6 dB attenuator from Pasternack. This 6 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-day shipping. The max input power rating (CW) of this RF attenuator is 5 Watts. This attenuator has a maximum VSWR of 1.45:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with 2.4mm connectors is constructed with aluminum body material. The bidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 6 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This 2.4mm attenuator has a male gender on side 1 and a 2.4mm female connector on side 2. Our RF attenuator is rated for a maximum attenuation value of 6 dB. The Pasternack PE7511-6 attenuator is rated for up to 50 GHz. This coaxial attenuator is also suitable for precision measurements, production systems, instrumentation and prototyping and characterization applications. The 6 dB attenuator has a stainless steel connector built with plating. Our fixed RF attenuator PE7511-6 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 6 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 1 | ||
| PE7535-40 | Pasternack Enterprises | Key Specifications, Design: Continuously Variable, Maximum Frequency: 12.4 GHz, Impedance: 50 Ohm, Power Maximum: 5 Watt, VSWR Maximum: 1.5:1, Connector Series 1: SMA, Connector Gender 1: Female, Connector Series 2: SMA, Connector Gender 2: Female, Minimum Attenuation: 0 dB, Maximum Attenuation: 40 dB, Step Type: Dial. 0 to 40 dB Variable Attenuator, SMA Female to SMA Female Rated to 5 Watts from 4 GHz to 12.4 GHz. PE7535-40 is a continuously variable attenuator from Pasternack. Our coaxial adjustable attenuator has an impedance of 50 Ohm and is precision manufactured to RF and microwave industry specifications. This RF variable attenuator comes with a maximum insertion loss of 0.5 dB. Make your online purchase right now to take advantage of our same-business-day shipping. Pasternack’s PE7535-40 variable RF attenuator has a SMA female connector configuration and a rotary dial for continuous attenuation level adjustment. Our PE7535-40 variable attenuator has a maximum attenuation of 40 dB. This microwave RF variable attenuator has a frequency range of 7 GHz to 12.4 GHz and a maximum VSWR of 1.5:1. Our continuously variable attenuator is rated to 5 Watts (CW) at the stated attenuation. Our continuously variable attenuator has an overall length of 2 inches, a width of 1.25 inches, and weighs 0.02 lbs. This radio frequency continuously variable attenuator with SMA connectors is built with aluminum. Additional dimensions and specifications for this 40 dB variable attenuator are on our downloadable PDF datasheet above. Our variable attenuator PE7535-40 is shipped the same business day as purchased from Pasternack’s facility. This attenuator is part of our RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF variable attenuator as per your requirements. |
| 0 | ||
| PE7520-6 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 6 GHz, Nominal Attenuation: 6 dB, Attenuation Accuracy, Typ: 0.5 dB, VSWR, Max: 1.3:1, Input Power, Max (CW): 2 Watts, Body Material: Brass, Connector-In Series: QMA, Connector-In Gender: Male, Connector-Out Series: QMA, Connector-Out Gender: Female. 6 dB Fixed Attenuator, QMA Male to QMA Female Brass Tri-Metal Body Rated to 2 Watts Up to 6 GHz. PE7520-6 is a fixed 6 dB attenuator from Pasternack. This 6 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-day shipping. Pasternack’s PE7520-6 fixed attenuator is available with a typical attenuation accuracy of 0.5 dB. The max input power rating (CW) of this RF attenuator is 2 Watts. Our fixed radio frequency attenuator with QMA connectors is constructed with brass body material and tri-metal plating. The connectorized bidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 6 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This QMA attenuator has a male gender on side 1 and a QMA female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 6 dB. The Pasternack PE7520-6 attenuator is rated for up to 6 GHz. This coaxial attenuator is also suitable for instrumentation, precision measurements, prototyping and characterization, production systems, 5G cellular bands and DAS systems applications. The 6 dB attenuator has a brass connector built with tri-metal plating. Our fixed RF attenuator PE7520-6 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 6 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 0 | ||
| PE7512-20 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connection Type: In-Series, Connector-In Impedance: 50 Ohms, Max Freq: 40 GHz, Nominal Attenuation: 20 dB, Attenuation Accuracy, Typ: 1 dB, VSWR, Max: 1.35:1, Input Power, Max (CW): 5 Watts, Body Material: Black Anodized Aluminum, Connector-In Series: 2.92mm, Connector-In Gender: Male, Connector-Out Series: 2.92mm, Connector-Out Gender: Female, Max Operating Temperature: 85 deg C, Min Operating Temperature: -55 deg C. 20 dB Fixed Attenuator, 2.92mm Male to 2.92mm Female Black Anodized Aluminum Body Rated to 5 Watts Up to 40 GHz. PE7512-20 is a 20 dB fixed attenuator from Pasternack. This 20 dB attenuator is an in-line, resistive PI attenuator pad design. This connectorized RF attenuator comes with a maximum attenuation accuracy of 1.5 dB. Our in-series coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. Pasternack’s PE7512-20 in-series fixed attenuator is available with a typical attenuation accuracy of 1 dB. The max input power rating (CW) of this RF attenuator is 5 Watts. This attenuator has a maximum VSWR of 1.35:1 and operates between -55 and 85 deg C. Our fixed radio frequency attenuator with 2.92mm connectors is constructed with black anodized aluminum body material. The connectorized bidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 20 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This 2.92mm attenuator has a male gender on side 1 and a 2.92mm female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 20 dB. The Pasternack PE7512-20 attenuator is rated for maximum frequency up to 40 GHz. This fixed coaxial attenuator is suitable for precision measurements, production systems, instrumentation, prototyping and characterization and 5G and 6G communications applications. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7512-20 will ship the same business day as purchased from Pasternack’s production facility. This 20 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 0 | ||
| PE7510-6 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 50 GHz, Nominal Attenuation: 6 dB, VSWR, Max: 1.45:1, Input Power, Max (CW): 2 Watts, Body Material: Stainless Steel, Connector-In Series: 2.4mm, Connector-In Gender: Male, Connector-Out Series: 2.4mm, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 6 dB Fixed Attenuator, 2.4mm Male to 2.4mm Female Stainless Steel Body Rated to 2 Watts Up to 50 GHz. PE7510-6 is a fixed 6 dB attenuator from Pasternack. This 6 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-day shipping. The max input power rating (CW) of this RF attenuator is 2 Watts. This attenuator has a maximum VSWR of 1.45:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with 2.4mm connectors is constructed with stainless steel body material. The bidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 6 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This 2.4mm attenuator has a male gender on side 1 and a 2.4mm female connector on side 2. Our RF attenuator is rated for a maximum attenuation value of 6 dB. The Pasternack PE7510-6 attenuator is rated for up to 50 GHz. This coaxial attenuator is also suitable for precision measurements, production systems, instrumentation and prototyping and characterization applications. The 6 dB attenuator has a stainless steel connector built with plating. Our fixed RF attenuator PE7510-6 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 6 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 0 | ||
| PE7520-10 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 6 GHz, Nominal Attenuation: 10 dB, Attenuation Accuracy, Typ: 0.5 dB, VSWR, Max: 1.3:1, Input Power, Max (CW): 2 Watts, Body Material: Brass, Connector-In Series: QMA, Connector-In Gender: Male, Connector-Out Series: QMA, Connector-Out Gender: Female. 10 dB Fixed Attenuator, QMA Male to QMA Female Brass Tri-Metal Body Rated to 2 Watts Up to 6 GHz. PE7520-10 is a fixed 10 dB attenuator from Pasternack. This 10 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-day shipping. Pasternack’s PE7520-10 fixed attenuator is available with a typical attenuation accuracy of 0.5 dB. The max input power rating (CW) of this RF attenuator is 2 Watts. Our fixed radio frequency attenuator with QMA connectors is constructed with brass body material and tri-metal plating. The connectorized bidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 10 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This QMA attenuator has a male gender on side 1 and a QMA female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 10 dB. The Pasternack PE7520-10 attenuator is rated for up to 6 GHz. This coaxial attenuator is also suitable for instrumentation, precision measurements, prototyping and characterization, production systems, 5G cellular bands and DAS systems applications. The 10 dB attenuator has a brass connector built with tri-metal plating. Our fixed RF attenuator PE7520-10 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 10 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 0 | ||
![]() Venkel Ltd. | MELFC0204-TE-7503FT | VENKEL LTD | MELF Coated Thin Film CR;0204;1/4W;�25PPM;750K;�1% RoHS : Compliant | 0 | ||
| MELFC0204-ZE-7503DT | VENKEL LTD | MELF Coated Thin Film CR;0204;2/5W;�25PPM;750K;�0.5% RoHS : Compliant | 0 | |||
| MELFC0207-VE-75R0FT | VENKEL LTD | MELF Coated Thin Film CR;0207;1/2W;�25PPM;75R;�1% RoHS : Compliant | 0 | |||
| MELFM0207-XE-75R0BT | VENKEL LTD | MELF Molded Thin Film CR;0207;1W;�25PPM;75R;�0.1% RoHS : Not Compliant | 0 | |||
| UPTF0603-16W-E-75R9AT-1K | VENKEL LTD | Ultra Precision Thin Film CR;0603;1/16W;�25PPM;75.9R;�0.05% RoHS : Compliant | 0 | |||
| UPTF2010-2W-E-7501AT | VENKEL LTD | Ultra Precision Thin Film CR;2010;1/2W;�25PPM;7.5K;�0.05% RoHS : Compliant | 0 | |||
| HPTF0805-TE-7502CT | VENKEL LTD | High Power Thin Film CR;0805;1/4W;�25PPM;75K;�0.25% RoHS : Compliant | 0 | |||
| HPTF2512-WE-75R0CT | VENKEL LTD | High Power Thin Film CR;2512;3/4W;�25PPM;75R;�0.25% RoHS : Compliant | 0 | |||
| MELFC0102-RE-7501BT | VENKEL LTD | MELF Coated Thin Film CR;0102;1/8W;�25PPM;7.5K;�0.1% RoHS : Compliant | 0 | |||
| MELFC0102-UE-75R0DT | VENKEL LTD | MELF Coated Thin Film CR;0102;1/5W;�25PPM;75R;�0.5% RoHS : Compliant | 0 | |||
| MELFC0207-VE-7500CT | VENKEL LTD | MELF Coated Thin Film CR;0207;1/2W;�25PPM;750R;�0.25% RoHS : Compliant | 0 | |||
| MELFC0207-XE-7501BT | VENKEL LTD | MELF Coated Thin Film CR;0207;1W;�25PPM;7.5K;�0.1% RoHS : Compliant | 0 | |||
| TFCR0201-32W-E-7501CT | VENKEL LTD | Thin Film CR;0201;1/32W;�25PPM;7.5K;�0.25% RoHS : Compliant | 0 | |||
| TFCR0402-16W-E-7502BT-1K | VENKEL LTD | Thin Film CR;0402;1/16W;�25PPM;75K;�0.1% RoHS : Compliant | 0 | |||
| TFCR0402-16W-E-7502CT | VENKEL LTD | Thin Film CR;0402;1/16W;�25PPM;75K;�0.25% RoHS : Compliant | 0 | |||
![]() Vyrian | ADE7518ASTZF8-RL![]() | Analog Devices Inc | Consumer Circuit, PQFP64 RoHS : Compliant | 9,766 | ||
ADE7569ASTZF8-RL![]() | Analog Devices Inc | Analog Circuit, 1 Func, PQFP64 RoHS : Compliant | 8,334 | |||
| 1.5KE7.5AG | onsemi | Trans Voltage Suppressor Diode, 1500W, 6.4V V(RWM), Unidirectional, 1 Element, Silicon RoHS : Compliant | 7,424 | |||
ADE7566ACPZF16-RL![]() | Analog Devices Inc | Analog Circuit, 1 Func RoHS : Compliant | 7,323 | |||
TLE75080EMHXUMA1![]() | Infineon Technologies AG | Buffer/Inverter Based Peripheral Driver, 0.5A, PDSO24 RoHS : Compliant | 6,763 | |||
| TP6KE75CA | Littelfuse Inc | Trans Voltage Suppressor Diode, 600W, 64.1V V(RWM), Bidirectional, 1 Element, Silicon, DO-204AC RoHS : Compliant | 5,975 | |||
| TE750B12RJ | TE Connectivity | Fixed Resistor, Wire Wound, 750W, 12ohm, 2500V, 5% +/-Tol, 440ppm/Cel, Chassis Mount RoHS : Compliant | 5,539 | |||
| RGE7500PL | Intel Corporation | Memory Controller, CMOS, CBGA1005 RoHS : Not Compliant | 3,771 | |||
| EP4CE75F29C8 | Intel / Altera | Field Programmable Gate Array, 4713 CLBs, 472.5MHz, 75408-Cell, PBGA780 | 2,912 | |||
| EP4CE75F23C9LN | Intel / Altera | Field Programmable Gate Array, 4713 CLBs, 265MHz, 75408-Cell, PBGA484 | 2,865 | |||
| EP4CE75U19 | Intel Corporation | Field Programmable Gate Array, 47 CLBs, PBGA484 | 2,563 | |||
| EP4CE75F23C8 | Intel / Altera | Field Programmable Gate Array, 4713 CLBs, 472.5MHz, 75408-Cell, PBGA484 | 1,839 | |||
| EP4CE75F23C8N | Intel / Altera | Field Programmable Gate Array, 4713 CLBs, 472.5MHz, 75408-Cell, PBGA484 | 1,541 | |||
| T495B106K025ZTE750 | KEMET Corporation | Tantalum Capacitor, Polarized, Tantalum (dry/solid), 25V, 10% +Tol, 10% -Tol, 10uF, Surface Mount, 1411 | 618 | |||
| RE75G2R50C02 | Vishay Intertechnologies | Fixed Resistor, Wire Wound, 30W, 2.5ohm, 8.6603V, 1% +/-Tol, 50ppm/Cel, Chassis Mount RoHS : Unknown | 463 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |