| Electronic Components Datasheet Search |
|
C941-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() DigiKey | MIC94163YCS-TR | Microchip Technology Inc | IC PWR SWITCH P-CHAN 1:1 6WLCSP RoHS : Compliant |
| 20,969 | |
| MIC94163YCS-TR | Microchip Technology Inc | IC PWR SWITCH P-CHAN 1:1 6WLCSP RoHS : Compliant |
| 20,969 | ||
| MIC94163YCS-TR | Microchip Technology Inc | IC PWR SWITCH P-CHAN 1:1 6WLCSP RoHS : Compliant |
| 18,000 | ||
| KSC941G LFS | C&K Switches | SWITCH TACTILE SPST-NO 0.05A 32V |
| 6,477 | ||
| KSC941G LFS | C&K Switches | SWITCH TACTILE SPST-NO 0.05A 32V |
| 6,477 | ||
| KSC941G LFS | C&K Switches | SWITCH TACTILE SPST-NO 0.05A 32V |
| 6,477 | ||
| MIC94161YCS-TR | Microchip Technology Inc | IC PWR SWITCH P-CHAN 1:1 6WLCSP RoHS : Compliant |
| 6,469 | ||
| MIC94161YCS-TR | Microchip Technology Inc | IC PWR SWITCH P-CHAN 1:1 6WLCSP RoHS : Compliant |
| 6,469 | ||
| MIC94162YCS-TR | Microchip Technology Inc | IC PWR SWITCH P-CHAN 1:1 6WLCSP RoHS : Compliant |
| 2,481 | ||
| MIC94162YCS-TR | Microchip Technology Inc | IC PWR SWITCH P-CHAN 1:1 6WLCSP RoHS : Compliant |
| 2,481 | ||
| MC941L | Rochester Electronics LLC | IC INV 6-CIR 1-IN 14-CDIP |
| 637 | ||
| TG-APC94-150-150-1.0-0 | t-Global Technology | THERM PAD 150MMX150MM RED |
| 111 | ||
| TG-APC94-150-150-1.5-0 | t-Global Technology | THERM PAD 150MMX150MM RED |
| 56 | ||
| EV1HMC941ALP4 | Analog Devices Inc | EVAL BOARD FOR HMC941ALP4E |
| 6 | ||
| TG-APC94-150-150-4.0-0 | t-Global Technology | THERM PAD 150MMX150MM RED |
| 3 | ||
![]() Avnet Americas | RNUC13VYKI5000299C941 | Intel Corporation | (Alt: RNUC13VYKI5000299C941) RoHS : Not Compliant |
| 0 | |
| MIC94162YCS-TR | Microchip Technology Inc | Power Switch Hi Side 3A 6-Pin WLCSP T/R - Tape and Reel (Alt: MIC94162YCS-TR) RoHS : Compliant |
| 0 | ||
| MIC94165YCS-TR | Microchip Technology Inc | Power Switch High Side 3A 6-Pin WLCSP T/R - Tape and Reel (Alt: MIC94165YCS-TR) RoHS : Compliant |
| 0 | ||
| K62C941 | TE Connectivity | - Bag (Alt: 5-1618276-3) RoHS : Not Compliant | 0 | |||
| NRE.ACP3K.SVC 941341 | Intel Corporation | (Alt: NRE.ACP3K.SVC 941341) RoHS : Not Compliant | 0 | |||
| MIC94164YCS-TR | Microchip Technology Inc | Power Switch Hi Side 6-Pin WLCSP T/R - Tape and Reel (Alt: MIC94164YCS-TR) RoHS : Compliant |
| 0 | ||
| MIC94163YCS-TR | Microchip Technology Inc | Power Load Distribution Switch IC, High Side, 1 Channel, 5.5 V, 3 A, 40 Milliohms, 6 Pins, WLCSP - Tape and Reel (Alt: MIC94163YCS-TR) RoHS : Compliant |
| 0 | ||
| MPC941AE | Renesas Electronics Corporation | - Trays (Alt: MPC941AE) RoHS : Compliant | 0 | |||
| MIC94161YCS-TR | Microchip Technology Inc | Power Load Distribution Switch IC, Active High, 1 Output, 5.5 V in, 3 A, 0.0145 ohm, WLCSP-6 - Tape and Reel (Alt: MIC94161YCS-TR) RoHS : Compliant |
| 0 | ||
| T3KT2KLIC 941636 | Intel Corporation | (Alt: T3KT2KLIC 941636) RoHS : Not Compliant |
| 0 | ||
| K61C941 | TE Connectivity | - Bag (Alt: 3-1618276-8) RoHS : Not Compliant |
| 0 | ||
![]() Newark | KSC941G LFS | C&K Switches | TACTILE SWITCH, 0.05A, 32VDC, 340GF, SMD; Product Range:KSC Series; Actuator Orientation:Top Actuated; Switch Mounting:Surface Mount; Actuator Style:Round Button; Actuating Force:340gf; Contact Rating:50mA at 32VDC; IP Rating:IP67 RoHS Compliant: Yes RoHS : Compliant |
| 2,677 | |
| KSC941J LFS | C&K Switches | TACTILE SWITCH, 0.05A, 32VDC, 340GF, SMD; Product Range:KSC Series; Actuator Orientation:Top Actuated; Switch Mounting:Surface Mount; Actuator Style:Plunger for Cap; Actuating Force:340gf; Contact Rating:50mA at 32VDC; IP Rating:IP67RoHS Compliant: Yes RoHS : Compliant |
| 914 | ||
| MIC94161YCS-TR | Microchip Technology Inc | INTEGRATED LOAD SW, 5.5V, WLCSP-6; RoHS : Compliant |
| 418 | ||
| MIC94161YCS-TR | Microchip Technology Inc | INTEGRATED LOAD SW, 5.5V, WLCSP-6; RoHS : Compliant |
| 418 | ||
| PC94-150X150X1.0 | t-Global Technology | THERMAL PAD, 1MM, 4W/M.K, RED; RoHS : Compliant |
| 62 | ||
| PC94-150X150X2.0 | t-Global Technology | THERMAL PAD, 2MM, 4W/M.K, RED; RoHS : Compliant |
| 46 | ||
| MP-TG-APC94-120-0.5 | SPC Multicomp | THERMAL PAD, 120X120X0.5MM, NON-SILICONE; RoHS : Compliant |
| 25 | ||
| HMC941ALP4E | Analog Devices Inc | DIGITAL ATTENUATOR, 100MHZ-33GHZ, QFN-EP; RoHS : Compliant |
| 24 | ||
| DC941A | Analog Devices Inc | DATA CONVERSION DEVELOPMENT KITS; RoHS : Compliant |
| 0 | ||
| MIC94165YCS-TR | Microchip Technology Inc | INTEGRATED LOAD SW, 5.5V, WLCSP-6; RoHS : Compliant |
| 0 | ||
| MIC94165YCS-TR | Microchip Technology Inc | INTEGRATED LOAD SW, 5.5V, WLCSP-6; RoHS : Compliant |
| 0 | ||
| C941U332MUVDBA7317 | KEMET Corporation | Ceramic Disc & Plate Capacitor, 900 Series, 3300 pF, 20%, Y5V, 400 VAC, Radial Leaded RoHS Compliant: Yes RoHS : Compliant | 0 | |||
| C941U332MZWDBA7317 | KEMET Corporation | CAP, 3300PF, 400VAC, 20%, Y5U; RoHS : Compliant |
| 0 | ||
![]() RS | MMC9415 | Rexnord Corporation | 4 15/16 CARTRIDGE ROLLER BRG |
| 0 | |
| G62C941 | Gigavac LLC | RELAY, SPDT, HIGH VOLTAGE, 25KV, 155V TURRET TERM, 12" FLYING LEADS, G62C SERI |
| 0 | ||
| G71C941 | Gigavac LLC | RELAY, SPDT, HIGH VOLTAGE, 70KV, 115V TURRET TERM, FLYING LEADS 12IN, G71C SERIE |
| 0 | ||
| ZMC9415 | Rexnord Corporation | 4 15/16 CARTRIDGE ROLLER BRG |
| 0 | ||
| VVA9C94-100 | Carling Technologies | HARDWARE, V-SERIES ROCKER SWITCH |
| 0 | ||
| 8.5020.C941.0400 | Fritz Kuebler Gmbh | Incremental; Stator Coupling; 8mm bore; RS422/5V; 1m Cable; 400PPR |
| 0 | ||
| 8.5020.C941.1024 | Fritz Kuebler Gmbh | Incremental; Stator Coupling; 8mm bore; RS422/5V; 1m Cable; 1024PPR |
| 0 | ||
| C941U332MUVDBA7317 | KEMET Corporation | 3.3NF 250 V AC CERAMIC SINGLE LAYER CAPACITOR, Y5V DIELECTRIC C900 SERIES RoHS : Compliant |
| 0 | ||
| C941U472MZVDBA7317 | KEMET Corporation | 4.7NF 300 V AC CERAMIC SINGLE LAYER CAPACITOR, Y5V DIELECTRIC C900 SERIES RoHS : Compliant |
| 0 | ||
| C941U392MYVDBA7317 | KEMET Corporation | 3.9NF 250 V AC CERAMIC SINGLE LAYER CAPACITOR, Y5V DIELECTRIC C900 SERIES RoHS : Compliant |
| 0 | ||
| C941U332MVVDBA7317 | KEMET Corporation | 3.3NF 400 V AC CERAMIC SINGLE LAYER CAPACITOR, Y5V DIELECTRIC C900 SERIES RoHS : Compliant |
| 0 | ||
| C941U392MZVDBA7317 | KEMET Corporation | 3.9NF 300 V AC CERAMIC SINGLE LAYER CAPACITOR, Y5V DIELECTRIC C900 SERIES RoHS : Compliant |
| 0 | ||
| C941U472MYVDBA7317 | KEMET Corporation | 4.7NF 250 V AC CERAMIC SINGLE LAYER CAPACITOR, Y5V DIELECTRIC C900 SERIES RoHS : Compliant |
| 0 | ||
| VVAAC94-100 (RCV-00109810 | VVAAC94-100 | VVAAC94100) | Carling Technologies | ACCESSORY, FITS CONTURA V-SERIES SEALED ROCKER SWITCHES |
| 0 | ||
| VTHA7CC94-100 (RCV-46404037|VTHA7CC94-100|VTHA7CC94100) | Carling Technologies | ROCKER SWITCH, SEALED, CONTURA, V-SERIES |
| 0 | ||
![]() Microchip Technology Inc | MIC94164YCS-TR | Microchip Technology Inc | Ultra-Low ON-Resistance, 3A High Side Load Switch Family with Reverse Blocking, WLCSP, Projected EOL: 2041-08-20 RoHS : Compliant |
| 383,999 | |
| MIC94162YCS-TR | Microchip Technology Inc | Ultra-Low ON-Resistance, 3A High Side Load Switch Family with Reverse Blocking, WLCSP, Projected EOL: 2041-02-12 RoHS : Compliant |
| 2,790 | ||
MIC94161YCS-EV![]() | Microchip Technology Inc | MIC94161YCS Evaluation Board, Projected EOL: |
| 39 | ||
| MIC94165YCS-EV | Microchip Technology Inc | MIC94165YCS Evaluation Board, Projected EOL: |
| 33 | ||
| MIC94162YCS-EV | Microchip Technology Inc | MIC94162YCS Evaluation Board, Projected EOL: |
| 29 | ||
| MIC94164YCS-EV | Microchip Technology Inc | MIC94164YCS Evaluation Board, Projected EOL: |
| 12 | ||
| MIC94163YCS-EV | Microchip Technology Inc | MIC94163YCS Evaluation Board, Projected EOL: |
| 3 | ||
| MIC94161YCS-TR | Microchip Technology Inc | Ultra-Low ON-Resistance, 3A High Side Load Switch Family with Reverse Blocking, WLCSP, Projected EOL: 2040-10-25 RoHS : Compliant |
| 0 | ||
| MIC94163YCS-TR | Microchip Technology Inc | Ultra-Low ON-Resistance, 3A High Side Load Switch Family with Reverse Blocking, WLCSP, Projected EOL: 2041-08-20 RoHS : Compliant |
| 0 | ||
| MIC94165YCS-TR | Microchip Technology Inc | Ultra-Low ON-Resistance, 3A High Side Load Switch Family with Reverse Blocking, WLCSP, Projected EOL: 2040-10-11 RoHS : Compliant |
| 0 | ||
![]() Rochester Electronics | MC941F | Motorola Mobility LLC | Inverter, DTL, CDFP14 RoHS : Not Compliant |
| 5 | |
| MC941L | Motorola Mobility LLC | Inverter, DTL, CDIP14 RoHS : Not Compliant |
| 637 | ||
![]() Sager | KSC941JLFS![]() | C&K Switches | Tactile Switches 3.4N J Bend RoHS : Compliant |
| 0 | |
| VVAAC94-100 | Carling Technologies | Rocker Switches VVAAC94100 |
| 0 | ||
| G62C941 | Gigavac LLC | 25KV, SPDT, 115VDC COIL / ROHS: Y |
| 0 | ||
| 2455RC-94170947 | Honeywell Sensing and Control | Thermostats COMMERCIAL THERMAL RoHS : Compliant | 0 | |||
| C94133-000 | TE Connectivity | Circular MIL Spec Backshells TXR54AU90-1006AI RoHS : Compliant |
| 0 | ||
KSC941GLFS![]() | C&K Switches | Tactile Switches 3.4N Gullwing RoHS : Compliant |
| 0 | ||
| G71C941 | Gigavac LLC | Industrial Relays 70KV SPDT HV RELAY |
| 0 | ||
| 2455RC-94170946 | Honeywell Sensing and Control | Thermostats COMMERCIAL THERMAL RoHS : Compliant | 0 | |||
| VVA9C94-100 | Carling Technologies | Switch Hardware VVA9C94100 |
| 0 | ||
| 3455RC-94170944 | Honeywell Sensing and Control / MICRO SWITCH | Thermostats COMMERCIAL THERMAL |
| 0 | ||
| 2455RC-94100931 | Honeywell Sensing and Control | Thermostats COMMERCIAL THERMAL RoHS : Compliant | 0 | |||
| VTHA7CC94-100 | Carling Technologies | Rocker Switches VTHA7CC94100 RoHS : Compliant |
| 0 | ||
![]() TME | C941U332MUVDBAWL45 | YAGEO Corporation | Capacitor: ceramic; 3300pF; 400VAC; Y5V; ±20%; THT; 10mm; 11x5.5mm |
| 9,500 | |
| KSC941J LFS | C&K Switches | Microswitch TACT; SPST-NO; Pos: 2; 0.05A/32VDC; SMT; none; 7.7mm |
| 3,604 | ||
| IN50C941 | ipf electronic gmbh | Sensor: inductive; 25mm; M50; Connection: Lemosa terminal; IP50 |
| 0 | ||
| EVC941 | ifm efector inc | Cable: for sensors; automatics |
| 0 | ||
![]() Ameya Holding Limited | MIC94164YCS-TR | Microchip Technology Inc | MIC94164 Series 5.5 V 3 A Surface Mount High Side Load Switch - WLCSP-6 RoHS : Compliant | 449,583 | ||
![]() Interstate Connecting Components | C94133-000 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part: RYCTXR54AU90-1006AI RoHS : Compliant | 0 | ||
![]() Richardson RFPD | HMC941ALP4E | Analog Devices Inc | 5Bit 0.5dBStep 15.5dB 33GHz 24-Pin LFCSP EP Cut Ta RoHS : Compliant |
| 5 | |
| HMC941LP4E-EVL | Analog Devices Inc | ATTENUATOR EVAL BD RoHS : Compliant | 0 | |||
| DC941A | Analog Devices Inc | LTC2482 ADC Demonstration Circuit RoHS : Compliant |
| 0 | ||
| EV1HMC941ALP4 | Analog Devices Inc | HMC941ALP4E Digital Attenuator Evaluation Board RoHS : Compliant |
| 0 | ||
| HMC941A-SX | Analog Devices Inc | 5Bit 0.5dBStep 15.5dB 30GHz 9-Pin Die Tray RoHS : Compliant |
| 0 | ||
| HMC941ALP4ETR | Analog Devices Inc | 5Bit 0.5dBStep 15.5dB 33GHz 24-Pin QFN EP T/R RoHS : Compliant |
| 0 | ||
![]() Avnet Abacus | C94133-000 | TE Connectivity | (Alt: C94133-000) RoHS : Compliant | 0 | ||
| C941U332MUVDBA7317 | KEMET Corporation | Ceramic Suppression Capacitor 3300 pF 20 X1 Y1 400 Vac 250 Vac Radial Leaded (Alt: C941U332MUVDBA7317) RoHS : Compliant | 0 | |||
| C941U472MZVDBA7317 | KEMET Corporation | Ceramic Suppression Capacitor 4700 pF 20 X1 Y2 440 VAC 300 VAC Radial Leaded (Alt: C941U472MZVDBA7317) RoHS : Compliant | 0 | |||
| C941U392MYVDBA7317 | KEMET Corporation | Ceramic Suppression Capacitor 3900 pF 20 X1 Y2 400 VAC 250 VAC Radial Leaded (Alt: C941U392MYVDBA7317) RoHS : Compliant | 0 | |||
| C941U332MVVDBA7317 | KEMET Corporation | Ceramic Suppression Capacitor 3300 pF 20 X1 Y1 400 VAC 400 VAC Radial Leaded (Alt: C941U332MVVDBA7317) RoHS : Compliant | 0 | |||
| C941U392MZVDBA7317 | KEMET Corporation | Ceramic Suppression Capacitor 3900 pF 20 X1 Y2 440 Vac 300 Vac Radial Leaded (Alt: C941U392MZVDBA7317) RoHS : Compliant | 0 | |||
| C941U472MYVDBA7317 | KEMET Corporation | Ceramic Suppression Capacitor 4700 pF 20 X1 Y2 400 VAC 250 VAC Radial Leaded (Alt: C941U472MYVDBA7317) RoHS : Compliant | 0 | |||
| C941U332MYWDBA7317 | KEMET Corporation | Ceramic Suppression Capacitor 3300 pF 20 X1 Y2 400 VAC 250 VAC Radial Leaded (Alt: C941U332MYWDBA7317) RoHS : Compliant | 0 | |||
| C941U102KVYDCA7317 | KEMET Corporation | Ceramic Suppression Capacitor 1000 pF 10 X1 Y1 400 VAC 400 VAC Radial Leaded (Alt: C941U102KVYDCA7317) RoHS : Compliant | 0 | |||
| C941U332MVVDAAWL45 | KEMET Corporation | Ceramic Suppression Capacitor 3300 pF 20 X1 Y1 400 VAC 400 VAC Radial Leaded (Alt: C941U332MVVDAAWL45) RoHS : Compliant | 0 | |||
| C941U332MZWDBA7317 | KEMET Corporation | Ceramic Suppression Capacitor 3300 pF 20 X1 Y2 440 Vac 300 Vac Radial Leaded (Alt: C941U332MZWDBA7317) RoHS : Compliant | 0 | |||
![]() Avnet Asia | NTCALUGE4C94122A | Vishay Intertechnologies | (Alt: NTCALUGE4C94122A) RoHS : Compliant | 0 | ||
![]() Avnet Silica | MIC94162YCS-TR | Microchip Technology Inc | Power Switch Hi Side 3A 6Pin WLCSP TR (Alt: MIC94162YCS-TR) RoHS : Compliant | 0 | ||
| MIC94165YCS-TR | Microchip Technology Inc | Power Switch High Side 3A 6Pin WLCSP TR (Alt: MIC94165YCS-TR) RoHS : Compliant | 0 | |||
| MIC94164YCS-TR | Microchip Technology Inc | Power Switch Hi Side 6Pin WLCSP TR (Alt: MIC94164YCS-TR) RoHS : Compliant | 0 | |||
| MIC94163YCS-TR | Microchip Technology Inc | Power Load Distribution Switch IC High Side 1 Channel 55 V 3 A 40 Milliohms 6 Pins WLCSP (Alt: MIC94163YCS-TR) RoHS : Compliant | 0 | |||
| MIC94161YCS-TR | Microchip Technology Inc | Power Load Distribution Switch IC Active High 1 Output 55 V in 3 A 00145 ohm WLCSP6 (Alt: MIC94161YCS-TR) RoHS : Compliant | 0 | |||
![]() EBV Elektronik | MIC94162YCS-TR | Microchip Technology Inc | Power Switch Hi Side 3A 6Pin WLCSP TR (Alt: MIC94162YCS-TR) RoHS : Compliant | 0 | ||
| MIC94165YCS-TR | Microchip Technology Inc | Power Switch High Side 3A 6Pin WLCSP TR (Alt: MIC94165YCS-TR) RoHS : Compliant | 0 | |||
| MIC94164YCS-TR | Microchip Technology Inc | Power Switch Hi Side 6Pin WLCSP TR (Alt: MIC94164YCS-TR) RoHS : Compliant | 0 | |||
| MIC94163YCS-TR | Microchip Technology Inc | Power Load Distribution Switch IC High Side 1 Channel 55 V 3 A 40 Milliohms 6 Pins WLCSP (Alt: MIC94163YCS-TR) RoHS : Compliant | 0 | |||
| MIC94161YCS-TR | Microchip Technology Inc | Power Load Distribution Switch IC Active High 1 Output 55 V in 3 A 00145 ohm WLCSP6 (Alt: MIC94161YCS-TR) RoHS : Compliant | 0 | |||
![]() Master Electronics | MIC94164YCS-TR | Microchip Technology Inc | Power Switch Hi Side 3A 6-Pin WLCSP T/R RoHS : Compliant |
| 9,000 | |
KSC941JLFS![]() | C&K Switches | The KSC941JLFS is a sealed momentary action SPST tactile switch with J-bend terminals for surface-mount applications. RoHS : Compliant |
| 2,850 | ||
| MIC94163YCS-TR | Microchip Technology Inc | Power Switch Hi Side 3A 6-Pin WLCSP T/R RoHS : Compliant |
| 2,000 | ||
| MIC94165YCS-TR | Microchip Technology Inc | Power Switch Hi Side 3A 6-Pin WLCSP T/R RoHS : Compliant |
| 0 | ||
| K62C941 | TE Connectivity | High Voltage Relays RoHS : Not Compliant |
| 0 | ||
| VVAAC94-100 | Carling Technologies | V-SERIES ROCKER SWITCH RoHS : Compliant |
| 0 | ||
| MIC94161YCS-TR | Microchip Technology Inc | The MIC94161YCS-TR is a 3A high-side load switch featuring a 1.7V to 5.5V operating range reverse current blocking and overvoltage protection. RoHS : Compliant |
| 0 | ||
| C94133-000 | TE Connectivity | TXR54AU90-1006AI MOQ Reduction RoHS : Compliant |
| 0 | ||
KSC941GLFS![]() | C&K Switches | SMT Tactile Switch - 3.4N - 32VDC - 50mA - Silver Contacts - Gullwing - Hard Actuator - 7.7mm High - Lead Free - IP67 RoHS : Compliant |
| 0 | ||
| VVA9C94-100 | Carling Technologies | V-SERIES ROCKER SWITCH RoHS : Compliant |
| 0 | ||
| K61C941 | TE Connectivity | High Voltage Relays RoHS : Not Compliant |
| 0 | ||
| 3455RC-94170944 | Honeywell Sensing and Control | Honeywell Ceramic Automatic Reset Thermostats 3455RC Redi-TempSeries 3455RC-94170944 Switch Type SPST Automatic Reset Close on Rise Contact Type Silver Alloy Ceramic 15 A/10 A resistive max. B237 T106 Operating Temperature 0 °C to 260 °C [32 °F to 500 °F] Open Temperature 140 °C [284 °F] Close Temperature 162 °C [323.6 °F] Open Tolerance 6 °C [10.8 °F] Close Tolerance 7 °C [12.6 °F] RoHS : Compliant |
| 0 | ||
| VTHA7CC94-100 | Carling Technologies | V-SERIES ROCKER SWITCH RoHS : Compliant |
| 0 | ||
| MIC94162YCS-TR | Microchip Technology Inc | Power Switch Hi Side 3A 6-Pin WLCSP T/R RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3C9415/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Trimmed Lead, Connector 2 Gender: Hermaphroditic, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Female to Trimmed Lead Low Loss Cable 24 Inch Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly SMA female to trimmed lead low loss cable 24 inch length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA female to trimmed lead low loss cable 24 inch length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to trimmed lead cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a trimmed lead cable connection on the other. Our low loss SMA to trimmed lead cable assembly has a female gender on end 1 and a sexless on end 2. PE3C9415/HS-24 can also be known as a low loss SMA jack to trimmed lead sexless cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C9415/HS-24 RF cable has a PVC jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. SMA jack to trimmed lead sexless cable assembly PE3C9415/HS-24 is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to trimmed lead cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C9415/HS-24 can also be used in the other direction and will be a trimmed lead sexless to SMA female cable assembly if the opposite connectivity is required. Low loss SMA jack to trimmed lead sexless cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to trimmed lead cable assembly for quick shipment worldwide. Variations of SMA and trimmed lead cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to Trimmed Lead low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | |
| PE3C9415/HS-100CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Trimmed Lead, Connector 2 Gender: Hermaphroditic, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. SMA Female to Trimmed Lead Low Loss Cable 100 CM Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly SMA female to trimmed lead low loss cable 100 cm length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA female to trimmed lead low loss cable 100 cm length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to trimmed lead cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a trimmed lead cable connection on the other. Our low loss SMA to trimmed lead cable assembly has a female gender on end 1 and a sexless on end 2. PE3C9415/HS-100CM can also be known as a low loss SMA jack to trimmed lead sexless cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C9415/HS-100CM RF cable has a PVC jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. SMA jack to trimmed lead sexless cable assembly PE3C9415/HS-100CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to trimmed lead cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C9415/HS-100CM can also be used in the other direction and will be a trimmed lead sexless to SMA female cable assembly if the opposite connectivity is required. Low loss SMA jack to trimmed lead sexless cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to trimmed lead cable assembly for quick shipment worldwide. Variations of SMA and trimmed lead cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to Trimmed Lead low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C9419 | Pasternack Enterprises | 0 | ||||
| PE3C9418/BL/HS2 | Pasternack Enterprises | 0 | ||||
| PE3C9414 | Pasternack Enterprises | 0 | ||||
| PE3C9415/HS-200CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Trimmed Lead, Connector 2 Gender: Hermaphroditic, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. SMA Female to Trimmed Lead Low Loss Cable 200 CM Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly SMA female to trimmed lead low loss cable 200 cm length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA female to trimmed lead low loss cable 200 cm length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to trimmed lead cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a trimmed lead cable connection on the other. Our low loss SMA to trimmed lead cable assembly has a female gender on end 1 and a sexless on end 2. PE3C9415/HS-200CM can also be known as a low loss SMA jack to trimmed lead sexless cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C9415/HS-200CM RF cable has a PVC jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. SMA jack to trimmed lead sexless cable assembly PE3C9415/HS-200CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to trimmed lead cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C9415/HS-200CM can also be used in the other direction and will be a trimmed lead sexless to SMA female cable assembly if the opposite connectivity is required. Low loss SMA jack to trimmed lead sexless cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to trimmed lead cable assembly for quick shipment worldwide. Variations of SMA and trimmed lead cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to Trimmed Lead low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C9416 | Pasternack Enterprises | 0 | ||||
| PE3C9411 | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-402-LF. 4.3-10 Female to N Female Low PIM Cable Using TFT-402-LF Coax. PE3C9411 is a 4.3-10 female to N female cable using coax. This Pasternack 4.3-10 female to N female cable assembly uses a 50 Ohm 4.3-10 for connector 1 and a 50 Ohm N for connector 2. Our female 4.3-10 to female N cable assembly uses a cable type that is. Pasternack PE3C9411 4.3-10 female to N female cable assembly is constructed with coax. | 0 | |||
| PE3C9415/HS-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Trimmed Lead, Connector 2 Gender: Hermaphroditic, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Female to Trimmed Lead Low Loss Cable 36 Inch Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly SMA female to trimmed lead low loss cable 36 inch length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA female to trimmed lead low loss cable 36 inch length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to trimmed lead cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a trimmed lead cable connection on the other. Our low loss SMA to trimmed lead cable assembly has a female gender on end 1 and a sexless on end 2. PE3C9415/HS-36 can also be known as a low loss SMA jack to trimmed lead sexless cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C9415/HS-36 RF cable has a PVC jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. SMA jack to trimmed lead sexless cable assembly PE3C9415/HS-36 is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to trimmed lead cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C9415/HS-36 can also be used in the other direction and will be a trimmed lead sexless to SMA female cable assembly if the opposite connectivity is required. Low loss SMA jack to trimmed lead sexless cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to trimmed lead cable assembly for quick shipment worldwide. Variations of SMA and trimmed lead cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to Trimmed Lead low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C9417/HS | Pasternack Enterprises | 0 | ||||
| PE3C9418/BL/HS | Pasternack Enterprises | 0 | ||||
| PE3C9415/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Trimmed Lead, Connector 2 Gender: Hermaphroditic, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. SMA Female to Trimmed Lead Low Loss Cable Using LMR-100 Coax with HeatShrink., Radio frequency assembly SMA female to trimmed lead low loss cable using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA female to trimmed lead low loss cable using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to trimmed lead cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a trimmed lead cable connection on the other. Our low loss SMA to trimmed lead cable assembly has a female gender on end 1 and a sexless on end 2. PE3C9415/HS can also be known as a low loss SMA jack to trimmed lead sexless cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C9415/HS RF cable has a PVC jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. SMA jack to trimmed lead sexless cable assembly PE3C9415/HS is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to trimmed lead cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C9415/HS can also be used in the other direction and will be a trimmed lead sexless to SMA female cable assembly if the opposite connectivity is required. Low loss SMA jack to trimmed lead sexless cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to trimmed lead cable assembly for quick shipment worldwide. Variations of SMA and trimmed lead cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to Trimmed Lead low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 0 | |||
| PE3C9415 | Pasternack Enterprises | 0 | ||||
| PE3C9412 | Pasternack Enterprises | 0 | ||||
| PE3C9413 | Pasternack Enterprises | 0 | ||||
![]() Vyrian | HMC941 | Analog Devices Inc | Variable Attenuator, 100MHz Min, 30000MHz Max, 4.8dB Insertion Loss-Max RoHS : Compliant | 11,736 | ||
| HMC941ALP4E | Analog Devices Inc | Variable Attenuator, 100MHz Min, 33000MHz Max, 6.5dB Insertion Loss-Max RoHS : Compliant | 11,180 | |||
| HMC941A-SX | Analog Devices Inc | RoHS : Compliant | 11,008 | |||
| HMC941LP4E | Analog Devices Inc | Variable Attenuator, 100MHz Min, 33000MHz Max, 6.5dB Insertion Loss-Max, GAAS RoHS : Compliant | 10,867 | |||
| 130450-HMC941LP4E | Analog Devices Inc | 9,757 | ||||
| HMC941LP4ETR | Analog Devices Inc | Variable Attenuator, GAAS RoHS : Compliant | 9,699 | |||
MM54C941N![]() | Texas Instruments | Bus Driver, CMOS Series, 1-Func, 8-Bit, True Output, CMOS, PDIP20 | 8,933 | |||
MM54C941J![]() | Texas Instruments | Bus Driver, CMOS Series, 1-Func, 8-Bit, True Output, CMOS, CDIP20 | 8,402 | |||
MM74C941J![]() | Texas Instruments | Bus Driver, CMOS Series, 1-Func, 8-Bit, True Output, CMOS, CDIP20 | 7,652 | |||
| DC941A | Analog Devices Inc | 6,594 | ||||
| EV1HMC941ALP4 | Analog Devices Inc | 5,835 | ||||
| HMC941-SX | Analog Devices Inc | 5,756 | ||||
| HMC941A | Analog Devices Inc | Variable Attenuator, 100MHz Min, 30000MHz Max, 5.1dB Insertion Loss-Max, GAAS RoHS : Compliant | 5,589 | |||
| SC94101RHDR | Texas Instruments | 4,387 | ||||
MPC941AER2![]() | Freescale Semiconductor | Low Skew Clock Driver, 941 Series, 27 True Output(s), 0 Inverted Output(s), PQFP48 RoHS : Compliant | 801 | |||
![]() Win Source Electronics | MIC94164YCS | Microchip Technology Inc | Power Switch ICs |
| 90,000 | |
| MIC94164YCS-TR | Microchip Technology Inc | IC LOAD SWITCH HI SIDE 3A 6WLCSP RoHS : Compliant |
| 83,619 | ||
| MIC94163YCS-TR | Microchip Technology Inc | IC PWR SWITCH P-CHAN 1:1 6WLCSP RoHS : Compliant |
| 15,302 | ||
| MIC94165YCS-TR | Microchip Technology Inc | IC PWR SWITCH P-CHAN 1:1 6WLCSP RoHS : Compliant |
| 6,000 | ||
| HMC941A | Analog Devices Inc | HMC941AG - ATTENUATORS / RF Attenuators RoHS : Compliant |
| 100 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |