 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
C76M93C76-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
 Ameya Holding Limited | FDMC7692 | onsemi | 30V,8.5mΩ,13.3A,N-Channel Power MOSFET RoHS : Compliant | 349,308 | ||
 NexGen Digital | SLC7649S-101KLC | Coilcraft Inc | RoHS : Compliant | 4,180 | ||
| 86C764X-E0N2AA | 171 | |||||
| 86C765 | 79 | |||||
P87LPC764BD,512 | NXP Semiconductors | RoHS : Compliant | 18 | |||
 Braemac Americas-Symmetry | NL-SW-LTE-SRC7611-4 | Airgain Inc | Skywire Cellular Modem, LTE CAT 4 Verizon firmware for North America, GPS, Skywire form factor |
| 0 | |
| NL-SW-LTE-SRC7611-4NG-B | Airgain Inc | Skywire Cellular Modem, LTE CAT 4 AT&T firmware for North America, no GPS, Skywire form factor |
| 0 | ||
| NL-SW-LTE-SRC7611-4NG | Airgain Inc | Skywire Cellular Modem, LTE CAT 4 AT&T firmware for North America, no GPS, Skywire form factor |
| 0 | ||
 DB Roberts | PLT3S-C76 | Panduit Corp | CABLE TIE, 11.6L (295MM) STANDARD, TEFZ RoHS : Compliant |
| 41 | |
| TM3S10-C76 | Panduit Corp | TIE MOUNT, #10 (M4) SCREW, TEFZEL, AQUA |
| 20 | ||
| NM22SWC76 | Essentra Components | WIRE CONNECTOR, SCREW ON, 2-12 | 0 | |||
| TBC76A | Essentra Components | T BOLT HOSE CLAMPSTAINLESS STE | 0 | |||
 Maritex | LMC7660IMX/NOPB | Texas Instruments | DC DC Converters; LMC7660IMX/NOPB; TEXAS INSTRUMENTS; 8; 1; 3.91 mm RoHS : Compliant |
| 6,928 | |
TC7660EOA713 | Microchip Technology Inc | DC DC Converters; TC7660EOA713; MICROCHIP TECHNOLOGY; 1; 8; 10 kHz; Charge Pump RoHS : Compliant |
| 5,013 | ||
| TC7662BEOA713 | Microchip Technology Inc | DC DC Converters; TC7662BEOA713; MICROCHIP TECHNOLOGY; 8; Charge Pump; 1; 3.99 mm RoHS : Compliant |
| 1,034 | ||
 Pasternack Enterprises US | PE3C7652 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SSMC, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm. SSMC Plug to Reverse Polarity TNC Female Bulkhead Cable Using RG188 Coax., Radio frequency assembly SSMC plug to reverse polarity TNC female bulkhead cable using RG188 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SSMC plug to reverse polarity TNC female bulkhead cable using RG188 coax, SSMC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SSMC to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SSMC cable connection on one end and reverse polarity TNC bulkhead cable connection on the other. Our SSMC to reverse polarity TNC cable assemblies have a plug gender on end 1 and female on end 2. PE3C7652 can also be known as a SSMC male to reverse polarity TNC jack cable assembly and will be shipped same-day as it is purchased. SSMC male to reverse polarity TNC jack cable assembly PE3C7652 is built with RG188 which is a flexible coax type. The Pasternack flexible SSMC cable assembly is manufactured with SSMC to TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency SSMC plug to reverse polarity TNC female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7652 can also be used in the other direction and will be reverse polarity TNC female bulkhead to SSMC plug cable assembly if the opposite connectivity is required. SSMC male to TNC reverse polarity jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SSMC to TNC cable assembly for quick shipment worldwide. Variations of SSMC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SSMC plug to reverse polarity TNC female bulkhead cable using RG188 coax. | 525 | ||
| PE3C7666-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: QMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. QMA Male Right Angle to TNC Male Right Angle Low Loss Cable 24 Inch Length Using LMR-195 Coax., Radio frequency assembly QMA male right angle to TNC male right angle low loss cable 24 inch length using LMR-195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The QMA male right angle to TNC male right angle low loss cable 24 inch length using LMR-195 coax, QMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom QMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle QMA cable connection on one end and right angle TNC cable connection on the other. Our low loss right angle QMA to right angle TNC cable assemblies have a male gender on end 1 and male on end 2. PE3C7666-24 can also be known as a low loss right angle QMA plug to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. QMA plug to TNC plug cable assembly PE3C7666-24 is built with LMR-195 which is a flexible coax type. The Pasternack flexible QMA cable assembly is manufactured with right angle QMA to right angle TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency QMA right angle male to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7666-24 can also be used in the other direction and will be right angle TNC male to right angle QMA male cable assembly if the opposite connectivity is required. Low loss QMA right angle plug to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality QMA to TNC cable assembly for quick shipment worldwide. Variations of QMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this QMA male right angle to TNC male right angle low loss cable 24 inch length using LMR-195 coax. |
| 240 | ||
| PE3C7602-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length: 24 inches. SMB Plug to SSMA Male Cable 24 Inch Length Using RG178 Coax., Radio frequency assembly SMB plug to SSMA male cable 24 inch length using RG178 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMB plug to SSMA male cable 24 inch length using RG178 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMB to SSMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMB cable connection on one end and SSMA cable connection on the other. Our SMB to SSMA cable assemblies have a plug gender on end 1 and male on end 2. This SMB to SSMA cable is a plug to male coax assembly, PE3C7602-24, can also be known as a SMB male to SSMA plug cable assembly and will be shipped same-day as it is purchased. SMB male to SSMA plug cable assembly PE3C7602-24 is built with RG178 which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with SMB to SSMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency SMB plug to SSMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7602-24 can also be used in the other direction and will be SSMA male to SMB plug cable assembly if the opposite connectivity is required. SMB male to SSMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMB to SSMA cable assembly for quick shipment worldwide. Variations of SMB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMB plug to SSMA male cable 24 inch length using RG178 coax. |
| 7 | ||
| PE3C7629-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: Mini SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. Mini SMP Female to SMA Male Right Angle Cable 100 cm Length Using PE-SR405FL Coax., Radio frequency assembly mini SMP female to SMA male right angle cable 100 cm length using PE-SR405FL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Mini SMP female to SMA male right angle cable 100 cm length using PE-SR405FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom mini SMP to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with mini SMP cable connection on one end and right angle SMA cable connection on the other. Our mini SMP to right angle SMA cable assemblies have a female gender on end 1 and male on end 2. This mini SMP to SMA cable is a female to male coax assembly, PE3C7629-100CM, can also be known as a mini SMP jack to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. Mini SMP jack to SMA plug cable assembly PE3C7629-100CM is built with PE-SR405FL which is a formable coax type. The Pasternack formable Mini SMP cable assembly is manufactured with mini SMP to right angle SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 12.4 GHz maximum frequency mini SMP female to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7629-100CM can also be used in the other direction and will be right angle SMA male to mini SMP female cable assembly if the opposite connectivity is required. Mini SMP jack to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality mini SMP to SMA cable assembly for quick shipment worldwide. Variations of mini SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this mini SMP female to SMA male right angle cable 100 cm length using PE-SR405FL coax. |
| 2 | ||
| PE3C7620/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: UHF, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. HN Male to UHF Male Cable 24 Inch Length Using RG58 Coax with HeatShrink., Radio frequency assembly HN male to UHF male cable 24 inch length using RG58 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The HN male to UHF male cable 24 inch length using RG58 coax with heatshrink, HN cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HN to UHF cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with HN cable connection on one end and UHF cable connection on the other. Our HN to UHF cable assemblies have a male gender on end 1 and male on end 2. PE3C7620/HS-24 can also be known as a HN plug to UHF plug cable assembly and will be shipped same-day as it is purchased. HN plug to UHF plug cable assembly PE3C7620/HS-24 is built with RG58 which is a flexible coax type. The Pasternack flexible HN cable assembly is manufactured with HN to UHF cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this HN male to UHF male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7620/HS-24 can also be used in the other direction and will be UHF male to HN male cable assembly if the opposite connectivity is required. HN plug to UHF plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HN to UHF cable assembly for quick shipment worldwide. Variations of HN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this HN male to UHF male cable 24 inch length using RG58 coax with heatshrink. |
| 0 | ||
| PE3C7625 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm. | 0 | |||
| PE3C7630-100CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. TNC Male to TNC Female Bulkhead Low Loss Cable 100 CM Length Using LMR-100 Coax., Radio frequency assembly TNC male to TNC female bulkhead low loss cable 100 cm length using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to TNC female bulkhead low loss cable 100 cm length using LMR-100 coax, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with TNC cable connection on one end and TNC bulkhead cable connection on the other. Our low loss TNC to TNC cable assemblies have a male gender on end 1 and female on end 2. PE3C7630-100CM can also be known as a low loss TNC plug to TNC jack cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC jack cable assembly PE3C7630-100CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 1 GHz maximum frequency TNC male to TNC female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7630-100CM can also be used in the other direction and will be TNC female bulkhead to TNC male cable assembly if the opposite connectivity is required. Low loss TNC plug to TNC jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to TNC female bulkhead low loss cable 100 cm length using LMR-100 coax. |
| 0 | ||
| PE3C7670 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. | 0 | |||
| PE3C7670/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. Reverse Polarity BNC Male to BNC Male Cable Using RG316 Coax with HeatShrink. PE3C7670/HS is a reverse polarity BNC male to BNC male cable using RG316 coax. This Pasternack reverse polarity BNC male to BNC male cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm BNC for connector 2. Our reverse polarity male BNC to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C7670/HS BNC reverse polarity male to BNC male cable assembly is constructed with RG316 coax. | 0 | |||
| PE3C7607 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm. | 0 | |||
| PE3C7652/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SSMC, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm. SSMC Plug to Reverse Polarity TNC Female Bulkhead Cable Using RG188 Coax with HeatShrink., Radio frequency assembly SSMC plug to reverse polarity TNC female bulkhead cable using RG188 coax with heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SSMC plug to reverse polarity TNC female bulkhead cable using RG188 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SSMC to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SSMC cable connection on one end and reverse polarity TNC bulkhead cable connection on the other. Our SSMC to reverse polarity TNC cable assemblies have a plug gender on end 1 and female on end 2. This SSMC to reverse polarity TNC cable is a plug to female coax assembly, PE3C7652/HS, can also be known as a SSMC male to reverse polarity TNC jack cable assembly and will be shipped same-day as it is purchased. SSMC male to reverse polarity TNC jack cable assembly PE3C7652/HS is built with RG188 which is a flexible coax type. The Pasternack flexible SSMC cable assembly is manufactured with SSMC to TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency SSMC plug to reverse polarity TNC female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7652/HS can also be used in the other direction and will be reverse polarity TNC female bulkhead to SSMC plug cable assembly if the opposite connectivity is required. SSMC male to TNC reverse polarity jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SSMC to TNC cable assembly for quick shipment worldwide. Variations of SSMC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SSMC plug to reverse polarity TNC female bulkhead cable using RG188 coax with heatshrink. | 0 | |||
| PE3C7689 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C240, RF Cable Type: PE-C240, RF Cable Impedance: 50 Ohm. | 0 | |||
| PE3C7603 | Pasternack Enterprises | Key Specifications, Connector Series 1: MMCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Straight Cut Lead, Connector Gender 2: Hermaphroditic, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm. | 0 | |||
| PE3C7658/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: 10-32, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. | 0 | |||
| PE3C7685 | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405TN, RF Cable Type: RG405 Tinned, RF Cable Impedance: 50 Ohm. | 0 | |||
 TE Connectivity | EC7649-000 | TE Connectivity | HLX203WE1TS033B Printable Tag Grade: Low Fire Hazard Operating Temperature Range: -40 – 105 °C Operating Temperature Range: -40 – 221 °F Primary Product Color: White Low Fire Hazard Max Temp: -40 – 105 °C | Hlx Low Fire Hazard Marker | Part Number: EC7649-000 | Internal Number: EC7649-000 | Alias Number: HLX203WE1TS033B | White | TE Connectivity RoHS : Compliant |
| 444 | |
 Venkel Ltd. | MELFC0102-RC-7683FT | VENKEL LTD | MELF Coated Thin Film CR;0102;1/8W;�50PPM;768K;�1% RoHS : Compliant | 0 | ||
| MELFC0204-TC-76R8DT | VENKEL LTD | MELF Coated Thin Film CR;0204;1/4W;�50PPM;76.8R;�0.5% RoHS : Compliant | 0 | |||
| MELFC0204-ZC-76R8BT | VENKEL LTD | MELF Coated Thin Film CR;0204;2/5W;�50PPM;76.8R;�0.1% RoHS : Compliant | 0 | |||
| MELFM0204-TC-7680DT | VENKEL LTD | MELF Molded Thin Film CR;0204;1/4W;�50PPM;768R;�0.5% RoHS : Not Compliant | 0 | |||
| MELFM0204-ZC-7680BT | VENKEL LTD | MELF Molded Thin Film CR;0204;2/5W;�50PPM;768R;�0.1% RoHS : Not Compliant | 0 | |||
| MELFM0207-VC-7681DT | VENKEL LTD | MELF Molded Thin Film CR;0207;1/2W;�50PPM;7.68K;�0.5% RoHS : Not Compliant | 0 | |||
| HPTF1206-TC-7683AT | VENKEL LTD | High Power Thin Film CR;1206;1/4W;�50PPM;768K ;�0.05% RoHS : Compliant | 0 | |||
| HPTF1210-UC-7682DT | VENKEL LTD | High Power Thin Film CR;1210;1/3W;�50PPM;76.8K;�0.5% RoHS : Compliant | 0 | |||
| HPTF2010-UC-7683DT | VENKEL LTD | High Power Thin Film CR;2010;1/3W;�50PPM;768K ;�0.5% RoHS : Compliant | 0 | |||
| MEHF0207-VC-76R8FT | VENKEL LTD | High Frequency MELF;0207;1/2W;�50PPM;76.8R�1% RoHS : Not Compliant | 0 | |||
| MELFC0207-XC-7683DT | VENKEL LTD | MELF Coated Thin Film CR;0207;1W;�50PPM;768K;�0.5% RoHS : Compliant | 0 | |||
| HPTF0805-TC-7680BT | VENKEL LTD | High Power Thin Film CR;0805;1/4W;�50PPM;768R;�0.1% RoHS : Compliant | 0 | |||
| HPTF1206-UC-7683FT | VENKEL LTD | High Power Thin Film CR;1206;1/3W;�50PPM;768K ;�1% RoHS : Compliant | 0 | |||
| HPTF1210-UC-7680FT | VENKEL LTD | High Power Thin Film CR;1210;1/3W;�50PPM;768R;�1% RoHS : Compliant | 0 | |||
| HPTF2010-UC-7681FT | VENKEL LTD | High Power Thin Film CR;2010;1/3W;�50PPM;7.68K;�1% RoHS : Compliant | 0 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
English ▼ 
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand