C40L-AF5-R Price, Distributor, Stock

Key Specifications, Polarity: Standard, Connector Series: QMA, Connector Gender: Male, Impedance: 50 Ohm, Body Style: Right Angle, Attachment Method: Solder/Solder, Mount Method: None, Minimum Frequency: DC, Maximum Frequency: 3 GHz. QMA Male Right Angle Low PIM Connector Solder Attachment for TFT-402. TC-402-QM-RA-LP QMA male right angle coaxial connector has an interface type of TFT-402 and a 50 Ohm impedance. Pasternack QMA male connector uses shield/contact solder/solder as an attachment method. Our male QMA right angle coaxial connector provides a minimum frequency of DC and a maximum frequency of 3 GHz. The Pasternack right angle QMA male coaxial connector has a PTFE dielectric type and a VSWR of 1.2. The Pasternack QMA coaxial connector has a brass body with tri-metal plating. Our TC-402-QM-RA-LP QMAright angle connector uses beryllium copper contact. This QMA male right angle coaxial RF connector is RoHS and REACH compliant. This Pasternack right angle male QMA connector will ship the same day as purchased. Our QMA right angle male connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. We also build custom QMA connector cable assemblies that will ship the same day as well.

1 : $19.07

PE3C4064-4

Pasternack Enterprises

Key Specifications, Connector Series 1: MMBX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MMBX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length: 4 inches. Snap-On MMBX Plug to Snap-On MMBX Plug Cable 4 Inch Length Using PE-SR405FLJ Coax., Radio frequency assembly snap-on MMBX plug to snap-on MMBX plug cable 4 inch length using PE-SR405FLJ coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Snap-on MMBX plug to snap-on MMBX plug cable 4 inch length using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MMBX to MMBX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with MMBX cable connection on one end and MMBX cable connection on the other. Our MMBX to MMBX cable assemblies have a plug gender on end 1 and plug on end 2. This MMBX to MMBX cable is a plug to plug coax assembly, PE3C4064-4, can also be known as a MMBX male to MMBX male cable assembly and will be shipped same-day as it is purchased. MMBX male to MMBX male cable assembly PE3C4064-4 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable MMBX cable assembly is manufactured with MMBX to MMBX cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 12.4 GHz maximum frequency MMBX plug to MMBX plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. MMBX male to MMBX male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MMBX to MMBX cable assembly for quick shipment worldwide. Variations of MMBX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this snap-on MMBX plug to snap-on MMBX plug cable 4 inch length using PE-SR405FLJ coax.

1 : $59.99
25 : $56.99
50 : $53.99
100 : $51.59

PE3C4064-12

Pasternack Enterprises

Key Specifications, Connector Series 1: MMBX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MMBX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length: 12 inches. Snap-On MMBX Plug to Snap-On MMBX Plug Cable 12 Inch Length Using PE-SR405FLJ Coax., Radio frequency assembly snap-on MMBX plug to snap-on MMBX plug cable 12 inch length using PE-SR405FLJ coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Snap-on MMBX plug to snap-on MMBX plug cable 12 inch length using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MMBX to MMBX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with MMBX cable connection on one end and MMBX cable connection on the other. Our MMBX to MMBX cable assemblies have a plug gender on end 1 and plug on end 2. This MMBX to MMBX cable is a plug to plug coax assembly, PE3C4064-12, can also be known as a MMBX male to MMBX male cable assembly and will be shipped same-day as it is purchased. MMBX male to MMBX male cable assembly PE3C4064-12 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable MMBX cable assembly is manufactured with MMBX to MMBX cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 12.4 GHz maximum frequency MMBX plug to MMBX plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. MMBX male to MMBX male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MMBX to MMBX cable assembly for quick shipment worldwide. Variations of MMBX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this snap-on MMBX plug to snap-on MMBX plug cable 12 inch length using PE-SR405FLJ coax.

1 : $61.99
25 : $58.89
50 : $55.79
100 : $53.31

PE3C4048-18

Pasternack Enterprises

Key Specifications, Connector Series 1: MMBX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MMBX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm, Length: 18 inches. Snap-On MMBX Plug to Snap-On MMBX Plug Cable 18 Inch Length Using RG316-DS Coax., Radio frequency assembly snap-on MMBX plug to snap-on MMBX plug cable 18 inch length using RG316-DS coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Snap-on MMBX plug to snap-on MMBX plug cable 18 inch length using RG316-DS coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MMBX to MMBX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with MMBX cable connection on one end and MMBX cable connection on the other. Our MMBX to MMBX cable assemblies have a plug gender on end 1 and plug on end 2. This MMBX to MMBX cable is a plug to plug coax assembly, PE3C4048-18, can also be known as a MMBX male to MMBX male cable assembly and will be shipped same-day as it is purchased. MMBX male to MMBX male cable assembly PE3C4048-18 is built with RG316-DS which is a flexible coax type. The Pasternack flexible MMBX cable assembly is manufactured with MMBX to MMBX cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency MMBX plug to MMBX plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. MMBX male to MMBX male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MMBX to MMBX cable assembly for quick shipment worldwide. Variations of MMBX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this snap-on MMBX plug to snap-on MMBX plug cable 18 inch length using RG316-DS coax.

1 : $70.99
25 : $67.44
50 : $63.89
100 : $61.05

PE3C4008

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-FF430, RF Cable Type: PE-FF430, RF Cable Impedance: 50 Ohm. Handheld RF Analyzer Rugged Phase Stable Cable N Male to SMA Male Cable Using PE-FF430 Coax, RoHS., Radio frequency assembly handheld RF analyzer rugged phase stable cable N male to SMA male cable using PE-FF430 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Handheld RF analyzer rugged phase stable cable N male to SMA male cable using PE-FF430 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with N type cable connection on one end and SMA cable connection on the other. Our type N to SMA cable assemblies have a male gender on end 1 and male on end 2. This type N to SMA cable is a male to male coax assembly, PE3C4008, can also be known as a N type plug to SMA plug cable assembly and will be shipped same-day as it is purchased. type N plug to SMA plug cable assembly PE3C4008 is built with PE-FF430 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to SMA cable connectors, has a 50 Ohm impedance and is sextuple shielded. RF specs on this 18 GHz maximum frequency type N male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4008 can also be used in the other direction and will be SMA male to type N male cable assembly if the opposite connectivity is required. type N plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this handheld RF analyzer rugged phase stable cable N male to SMA male cable using PE-FF430 coax, RoHS.

TC-400-SM

Pasternack Enterprises

Key Specifications, Polarity: Standard, Connector Series: SMA, Connector Gender: Male, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Crimp/Solder, Mount Method: None, Interface Type 1: LMR-400, Interface Type 2: PE-C400. SMA Male Connector Crimp/Solder Attachment For LMR-400, PE-C400. TC-400-SM SMA male coaxial connector has an interface type of LMR-400, PE-C400 and a 50 Ohm impedance. Pasternack SMA male connector uses shield/contact crimp/solder as an attachment method. The Pasternack SMA male coaxial connector has a teflon dielectric type. The Pasternack SMA coaxial connector has a brass body with nickel plating. Our TC-400-SM SMA connector uses beryllium copper contact. This SMA male coaxial RF connector is RoHS and REACH compliant. This Pasternack male SMA connector will ship the same day as purchased. Our SMA male connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. We also build custom SMA connector cable assemblies that will ship the same day as well, *LMR™ is a Trademark of Times Microwave.

1 : $27.99
25 : $26.87
50 : $26.03
100 : $25.47

PE3C4010-360

Pasternack Enterprises

1 : $3,550.0
25 : $3,372.5
50 : $3,195.0
100 : $3,053.0

PE3C4080LF/HS-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Jack, Connector 2 Polarity: Reverse Polarity, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. N Male to Reverse Polarity SMA Jack Low Loss Cable 48 Inch Length Using LMR-195 Coax with HeatShrink, LF Solder., Radio frequency assembly N male to reverse polarity SMA jack low loss cable 48 inch length using LMR-195 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to reverse polarity SMA jack low loss cable 48 inch length using LMR-195 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a reverse polarity SMA cable connection on the other. Our low loss type N to reverse polarity SMA cable assembly has a male gender on end 1 and a jack on end 2. PE3C4080LF/HS-48 can also be known as a low loss type N plug to reverse polarity SMA female cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C4080LF/HS-48 RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. Type N plug to reverse polarity SMA female cable assembly PE3C4080LF/HS-48 is built with LMR-195 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C4080LF/HS-48 can also be used in the other direction and will be a reverse polarity SMA jack to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to SMA reverse polarity female cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of type N and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $90.99
25 : $86.44
50 : $81.89
100 : $78.25

PE3C4007-60

Pasternack Enterprises

1 : $4,860.0
25 : $4,617.0
50 : $4,374.0
100 : $4,179.6

PE3C4052-8

Pasternack Enterprises

Key Specifications, Connector Series 1: MMBX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm, Length: 8 inches. Snap-On MMBX Plug Right Angle to SMA Female Bulkhead Cable 8 Inch Length Using RG316-DS Coax., Radio frequency assembly snap-on MMBX plug right angle to SMA female bulkhead cable 8 inch length using RG316-DS coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Snap-on MMBX plug right angle to SMA female bulkhead cable 8 inch length using RG316-DS coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MMBX to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle MMBX cable connection on one end and SMA bulkhead cable connection on the other. Our right angle MMBX to SMA cable assemblies have a plug gender on end 1 and female on end 2. This MMBX to SMA cable is a plug to female coax assembly, PE3C4052-8, can also be known as a right angle MMBX male to SMA jack cable assembly and will be shipped same-day as it is purchased. MMBX male to SMA jack cable assembly PE3C4052-8 is built with RG316-DS which is a flexible coax type. The Pasternack flexible MMBX cable assembly is manufactured with right angle MMBX to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency MMBX right angle plug to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4052-8 can also be used in the other direction and will be SMA female bulkhead to right angle MMBX plug cable assembly if the opposite connectivity is required. MMBX right angle male to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MMBX to SMA cable assembly for quick shipment worldwide. Variations of MMBX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this snap-on MMBX plug right angle to SMA female bulkhead cable 8 inch length using RG316-DS coax.

1 : $82.99
25 : $78.84
50 : $74.69
100 : $71.37

PE3C4091

Pasternack Enterprises

Key Specifications, Connector Series 1: QMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: QMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50. QMA Male to QMA Male Cable Using PE-SR402FL Coax. PE3C4091 is a QMA male to QMA male cable using PE-SR402FL coax. This Pasternack QMA male to QMA male cable assembly uses a 50 Ohm QMA for connector 1 and a 50 Ohm QMA for connector 2. Our male QMA to male QMA cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3C4091 QMA male to QMA male cable assembly is constructed with PE-SR402FL coax and the maximum VSWR is 1.26:1.

TC-400-MUHF

Pasternack Enterprises

Key Specifications, Polarity: Standard, Connector Series: Mini UHF, Connector Gender: Male, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Crimp/Solder, Mount Method: None, Minimum Frequency: DC, Maximum Frequency: 1 GHz, Interface Type 1: LMR-400, Interface Type 2: LMR-400-DB, Interface Type 3: LMR-400-UF, Interface Type 4: LMR-400-LLPX. Mini UHF Male Connector Crimp/Solder Attachment for LMR-400, LMR-400-DB, LMR-400-UF, LMR-400-LLPX. TC-400-MUHF Mini UHF male coaxial connector has an interface type of Mini UHF male which is compatible with LMR-400, LMR-400-DB, LMR-400-UF and LMR-400-LLPX cables and has an impedance of 50 Ohms. Pasternack's Mini UHF male connector uses crimp/solder as an attachment method. Our male Mini UHF coaxial connector provides a maximum frequency of 1 GHz. This Mini UHF male RF connector is stocked to be readily available for same business day shipment and can be expertly assembled using our online Cable Creator. The Pasternack Mini UHF male coaxial connector has a delrin dielectric type and a VSWR of 1.35:1. Pasternack's Mini UHF coaxial connector has a brass body with nickel plating. Our TC-400-MUHF Mini UHF connector uses a gold-plated brass contact. Additional RF connector specs and dimensions for this component can be found on its PDF specification datasheet and CAD drawings above. This push-on male Mini UHF coaxial RF connector has a maximum insertion loss of 0.15 dB. This Mini UHF connector has a gold inner contact plating. The Pasternack Mini UHF male connector has a maximum operating voltage of 300 Vrms. Our Mini UHF male connector has a length of 0.5 inches, a width of 0.5 inches, and a weight of 0.02 lbs. This Pasternack male Mini UHF connector will ship the same business day as purchased. Our Mini UHF male connector is part of over one million RF, microwave, and millimeter wave components in stock for local, domestic, and international shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF connector as per your requirements, *LMR® is a registered trademark of Times Microwave Systems.

1 : $7.03

PE3C4091LF

Pasternack Enterprises

Key Specifications, Connector Series 1: QMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: QMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm. QMA Male to QMA Male Cable Using PE-SR402FL Coax, LF Solder. PE3C4091LF is a QMA male to QMA male cable using PE-SR402FL coax. This Pasternack QMA male to QMA male cable assembly uses a 50 Ohm QMA for connector 1 and a 50 Ohm QMA for connector 2. Our male QMA to male QMA cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3C4091LF QMA male to QMA male cable assembly is constructed with PE-SR402FL coax.

PE3C4026/HS

Pasternack Enterprises

PE3C4056-18

Pasternack Enterprises

Key Specifications, Connector Series 1: MMBX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm, Length: 18 inches. Snap-On MMBX Plug to N Female Bulkhead Cable 18 Inch Length Using RG316-DS Coax., Radio frequency assembly snap-on MMBX plug to N female bulkhead cable 18 inch length using RG316-DS coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Snap-on MMBX plug to N female bulkhead cable 18 inch length using RG316-DS coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MMBX to N type cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with MMBX cable connection on one end and type N bulkhead cable connection on the other. Our MMBX to type N cable assemblies have a plug gender on end 1 and female on end 2. This MMBX to type N cable is a plug to female coax assembly, PE3C4056-18, can also be known as a MMBX male to type N jack cable assembly and will be shipped same-day as it is purchased. MMBX male to N type jack cable assembly PE3C4056-18 is built with RG316-DS which is a flexible coax type. The Pasternack flexible MMBX cable assembly is manufactured with MMBX to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency MMBX plug to N type female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4056-18 can also be used in the other direction and will be type N female bulkhead to MMBX plug cable assembly if the opposite connectivity is required. MMBX male to type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MMBX to N type cable assembly for quick shipment worldwide. Variations of MMBX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this snap-on MMBX plug to N female bulkhead cable 18 inch length using RG316-DS coax.

1 : $113.99
25 : $108.29
50 : $102.59
100 : $98.03

TE Connectivity

DRC40-BT

TE Connectivity

BOOT, 40P, 16SZ, PLG/REC, ST, BLK Number of Positions: 40 Primary Product Color: Black Protection & Strain Relief Accessory Type: Boot Primary Product Material: PVC Cable Exit Angle: 180 ° Automotive Connector Cap & Cover | 40 Black Boot PVC | Part Number: DRC40-BT | Internal Number: DRC40-BT | TE Connectivity
RoHS : Compliant

1 : $2.35

21,840

DRC40-BT-90DEG

TE Connectivity

BOOT, 40P, 16SZ, PLG/REC, RA, BLK Number of Positions: 40 Primary Product Color: Black Protection & Strain Relief Accessory Type: Boot Primary Product Material: PVC Cable Exit Angle: 90 ° Automotive Connector Cap & Cover | 40 Black Boot PVC | Part Number: DRC40-BT-90DEG | Internal Number: DRC40-BT-90DEG | TE Connectivity
RoHS : Compliant

1 : $9.62

1,222

DRC40-GKT

TE Connectivity

GASKET, 40P, BLK, DRC16 Connector Seal & Plug Type: Gasket Operating Temperature Range: -57 – 107 °C Operating Temperature Range: -71 – 225 °F Primary Product Color: Black Primary Product Material: Closed Cell Sponge Gasket Max Temp: -57 – 107 °C | Connector Seal & Cavity Plug | Part Number: DRC40-GKT | Internal Number: DRC40-GKT | Black | Closed Cell Sponge | TE Connectivity
RoHS : Compliant

1 : $1.06

1,040

B07D112BC4-0007

TE Connectivity

B07D112BC4-0007 = MS27245-1 Relay & Contactor Type: General Purpose Power Relay Current Type: DC Coil Magnetic System: Non-Polarized, Monostable Contact Arrangement: 2 Form C DPDT-CO Contact Current Rating: 10 A General Purpose Power Relay DC Non-Polarized, Monostable 2 Form C DPDT-CO | Electromechanical Relay | Part Number: B07D112BC4-0007 | Internal Number: 1-1617004-7 | TE Connectivity
RoHS : Compliant

1 : $739.0

B07D111BC4-0006

TE Connectivity

B07D111BC4-0006 = MS27247-1 Relay & Contactor Type: General Purpose Power Relay Current Type: DC Coil Magnetic System: Non-Polarized, Monostable Contact Arrangement: 2 Form C DPDT-CO Contact Current Rating: 10 A General Purpose Power Relay DC Non-Polarized, Monostable 2 Form C DPDT-CO | Electromechanical Relay | Part Number: B07D111BC4-0006 | Internal Number: 1-1617004-4 | TE Connectivity
RoHS : Compliant

1 : $717.47

HSHC40015RJ

TE Connectivity

HSHC400 15R 5% Resistance Value: 15 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Power Resistors: Aluminium Housed & Hsc | 15 Ω Wire Wound 5 % Power Resistor | Part Number: HSHC40015RJ | Internal Number: 1-2176734-5 | TE Connectivity
RoHS : Compliant

1 : $237.75

HSHC40047RJ

TE Connectivity

HSHC400 47R 5% Resistance Value: 47 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Power Resistors: Aluminium Housed & Hsc | 47 Ω Wire Wound 5 % Power Resistor | Part Number: HSHC40047RJ | Internal Number: 2-2176734-1 | TE Connectivity
RoHS : Compliant

1 : $237.75

HSHC4001R5J

TE Connectivity

HSHC400 1R5 5% Resistance Value: 1.5 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Power Resistors: Aluminium Housed & Hsc | 1.5 Ω Wire Wound 5 % Power Resistor | Part Number: HSHC4001R5J | Internal Number: 2176734-3 | TE Connectivity
RoHS : Compliant

1 : $237.75

Venkel Ltd.

MELFC0207-VC-4020BT

VENKEL LTD

MELF Coated Thin Film CR;0207;1/2W;�50PPM;402R;�0.1%
RoHS : Compliant

MELFM0204-TC-4021FT

VENKEL LTD

MELF Molded Thin Film CR;0204;1/4W;�50PPM;4.02K;�1%
RoHS : Not Compliant

MELFM0204-ZC-4021DT

VENKEL LTD

MELF Molded Thin Film CR;0204;2/5W;�50PPM;4.02K;�0.5%
RoHS : Not Compliant

MELFM0207-VC-4022FT

VENKEL LTD

MELF Molded Thin Film CR;0207;1/2W;�50PPM;40.2K;�1%
RoHS : Not Compliant

MELFM0207-VC-40R2DT

VENKEL LTD

MELF Molded Thin Film CR;0207;1/2W;�50PPM;40.2R;�0.5%
RoHS : Not Compliant

MELFM0207-XC-4020FT

VENKEL LTD

MELF Molded Thin Film CR;0207;1W;�50PPM;402R;�1%
RoHS : Not Compliant

HPTF0805-TC-4023BT

VENKEL LTD

High Power Thin Film CR;0805;1/4W;�50PPM;402K ;�0.1%
RoHS : Compliant

HPTF1210-UC-4023FT

VENKEL LTD

High Power Thin Film CR;1210;1/3W;�50PPM;402K ;�1%
RoHS : Compliant

MELFC0204-TC-4020FT

VENKEL LTD

MELF Coated Thin Film CR;0204;1/4W;�50PPM;402R;�1%
RoHS : Compliant

MELFC0204-ZC-4020DT

VENKEL LTD

MELF Coated Thin Film CR;0204;2/5W;�50PPM;402R;�0.5%
RoHS : Compliant

MELFC0207-VC-4021FT

VENKEL LTD

MELF Coated Thin Film CR;0207;1/2W;�50PPM;4.02K;�1%
RoHS : Compliant

MELFM0204-ZC-40R2FT

VENKEL LTD

MELF Molded Thin Film CR;0204;2/5W;�50PPM;40.2R;�1%
RoHS : Not Compliant

MELFM0207-VC-4020CT

VENKEL LTD

MELF Molded Thin Film CR;0207;1/2W;�50PPM;402R;�0.25%
RoHS : Not Compliant

TFCR0402-16W-C-4071BT-1K

VENKEL LTD

Thin Film CR;0402;1/16W;�50PPM;4.07K;�0.1%
RoHS : Compliant

TFCR0603-10W-C-4022BT

VENKEL LTD

Thin Film CR;0603;1/10W;�50PPM;40.2K;�0.1%
RoHS : Compliant

Vyrian

74HC40105DB,118

NXP Semiconductors

FIFO, 16X4, 600ns, Asynchronous, CMOS, PDSO16
RoHS : Compliant

13,166

LTC4050EMS-4.2#PBF

Analog Devices Inc

Power Supply Support Circuit, Adjustable, 2 Channel, PDSO10
RoHS : Compliant

12,096

LTC4060EFE

Analog Devices Inc

Power Supply Support Circuit, Adjustable, 1 Channel, PDSO16
RoHS : Not Compliant

12,027

LTC4002EDD-4-2-PBF

Analog Devices Inc

11,396

LTC4055EUF

Analog Devices Inc

Power Supply Support Circuit, Fixed, 3 Channel, CMOS, PQCC16
RoHS : Not Compliant

10,947

LTC4041IUFD-TRPBF

Analog Devices Inc

9,374

LTC4090EDJC-5-TRPBF

Analog Devices Inc

8,646

LTC4012IUF-1-PBF

Analog Devices Inc

8,564

LTC4054XES5-4-2-TRMPBF

Analog Devices Inc

8,214

LTC4080EDD#TRPBF

Analog Devices Inc

Power Supply Support Circuit, Adjustable, 1 Channel, PDSO10
RoHS : Compliant

5,955

LTC4006EGN-2#PBF

Analog Devices Inc

Power Supply Management Circuit, Adjustable, 1 Channel, PDSO16
RoHS : Compliant

5,694

LTC4089EDJC-5#TRPBF

Analog Devices Inc

Power Supply Management Circuit, Fixed, 1 Channel, PDSO22
RoHS : Compliant

5,469

LTC4080XEDD#PBF

Analog Devices Inc

Power Supply Support Circuit, Adjustable, 2 Channel, CMOS, PDSO10
RoHS : Compliant

5,074

74HC4017PW-Q100J

Nexperia

Ring Counter, HC/UH Series, Synchronous, Positive Edge Triggered, 10-Bit, Up Direction, CMOS, PDSO16
RoHS : Compliant

4,599

EP3C40U484C7

Altera Corporation

Field Programmable Gate Array, 39600 CLBs, 472.5MHz, 39600-Cell, CMOS, PBGA484
RoHS : Not Compliant

3,604

Waytek, Inc.

BK/ATC-40

Eaton Electronics

40 Amp Orange ATC Fuse

100 : $0.3886
200 : $0.3571
500 : $0.3217
1,000 : $0.2915
5,000 : $0.281

8,393

ACBP-V-40C 40A

OptiFuse

Type 1 Circuit Breaker In-Line Mounting 40A, 32VDC ORANGE

1 : $3.6027
50 : $3.0003
100 : $2.6026
200 : $2.4579
500 : $2.3496

1,645

DHURC-4-01

Essentra Components

Plug In Routing Clip Clip On 6.4mm | 1.6mm PA Natural

50 : $0.225
50 : $0.1836
100 : $0.1728
200 : $0.1584
500 : $0.1413
1,000 : $0.1341

1,000

ACBP-N-40C 40A

OptiFuse

Type 1 Circuit Breaker No Mounting Bracket 40A, 32VDC ORANGE

1 : $3.6239
50 : $3.0179
100 : $2.6179
200 : $2.4725
500 : $2.3634

185

ACBP-H-40C 40A

OptiFuse

Type 1 Circuit Breaker Right Angle Mounting 40A, 32VDC ORANGE

1 : $3.1512
50 : $2.6365
100 : $2.2899
200 : $2.1533
500 : $2.0692

LM-2C-40R/WLAT

NASON

Low Pressure Switch UL CSA 40 PSI SPDT Rising 18" UL 3173 10A@125/250 250 VAC 5A@30VDC

1 : $75.08
5 : $70.79
10 : $68.65
50 : $65.43
100 : $62.22

Win Source Electronics

CD74HC4066PWRE4

Texas Instruments

High Speed CMOS Logic Quad Bilateral Switches 14-TSSOP -55 to 125
RoHS : Compliant

975 : $0.3447
730 : $0.3845
565 : $0.3977
410 : $0.411
265 : $0.4243
110 : $0.517

79,570

CD74HC4067M96E4

Texas Instruments

IC MUX 16:1 160OHM 24SOIC
RoHS : Compliant

675 : $0.4458
540 : $0.4639
415 : $0.482
290 : $0.5183
190 : $0.5364
90 : $0.5727

47,270

CD74HC4051M96E4

Texas Instruments

IC MUX/DEMUX 8X1 16SOIC / Analog Multiplexer Single 8:1 16-Pin SOIC T/R
RoHS : Compliant

1,250 : $0.2694
1,000 : $0.2803
770 : $0.2913
540 : $0.3132
350 : $0.3241
165 : $0.3461

45,700

MC74HC4051ADG

onsemi

IC MUX/DEMUX 8X1 16SOIC / 1 Circuit IC Switch 8:1 100Ohm 16-SOIC
RoHS : Compliant

625 : $0.5396
470 : $0.6019
360 : $0.6226
265 : $0.6434
170 : $0.6642
70 : $0.8094

45,310

MC74HC4053ADR2G

onsemi

IC MUX/DEMUX TRIPLE 2X1 16SOIC
RoHS : Compliant

192 : $1.564
144 : $1.7444
111 : $1.8046
81 : $1.8647
52 : $1.9249
22 : $2.3459

30,000

74HC4052BQ

Nexperia

Dual 4-channel analog multiplexer, demultiplexer
RoHS : Compliant

650 : $0.52
485 : $0.58
375 : $0.6
275 : $0.62
175 : $0.6401
75 : $0.78

13,450

LTC4079IDD#TRPBF

Analog Devices Inc

IC BATT CHG MULTI-CHEM 10DFN
RoHS : Compliant

27 : $11.2491
20 : $12.547
16 : $12.9797
12 : $13.4123
8 : $13.845
3 : $16.8736

11,638

CD74HC4066M96G4

Texas Instruments

High-Speed CMOS Logic Quad Bilateral Switch | IC SWITCH QUAD 1X2 14SOIC
RoHS : Compliant

1,240 : $0.2717
925 : $0.3031
715 : $0.3135
520 : $0.3239
335 : $0.3344
140 : $0.4076

10,640

LTC4085EDE#TRPBF

Linear Technology

IC USB POWER MANAGER 14-DFN
RoHS : Compliant

79 : $4.2823
59 : $4.7765
46 : $4.9411
33 : $5.1059
22 : $5.2706
9 : $6.4234

3,800

LTC4006EGN-2#PBF

Linear Technology

IC CHARGER BATTERY 4A 16-SSOP
RoHS : Compliant

26 : $13.1788
20 : $14.6994
15 : $15.2064
11 : $15.7133
7 : $16.2202
3 : $19.7682

3,381

SN74HC4040N

Texas Instruments

IC ASYNC BINARY COUNTER 16-DIP
RoHS : Compliant

910 : $0.3695
680 : $0.4122
530 : $0.4263
385 : $0.4405
250 : $0.4547
105 : $0.5542

3,232

DE5LC40

Shindengen Electronic Manufacturing Co Ltd

Super Fast Recovery Rectifiers
RoHS : Compliant

555 : $0.6108
415 : $0.6814
320 : $0.7049
235 : $0.7283
150 : $0.7519
65 : $0.9163

1,998

LTC4055EUF

Linear Technology

USB Power Controller and Li-Ion Linear Charger
RoHS : Not Compliant

138 : $2.4436
103 : $2.7256
80 : $2.8196
58 : $2.9136
38 : $3.0075
16 : $3.6654

615

EP3C40F484C6

Intel Corporation

IC FPGA 331 I/O 484FBGA
RoHS : Not Compliant

2 : $325.9702
1 : $363.5821

222

EP3C40F780C6

Intel Corporation

IC FPGA 535 I/O 780FBGA
RoHS : Not Compliant

1 : $760.597

109

Wuhan P&S

MC74HC4051ADR2G

onsemi

Analog Multiplexers /Demultiplexers
RoHS : Compliant

1 : $0.6129
100 : $0.3912
500 : $0.3226
1,000 : $0.2966

20,000

NVMFS5C404NLWFT1G

onsemi

40V,0.67m��,370A,N-Ch Power MOSFET
RoHS : Compliant

1 : $7.85
100 : $5.01
500 : $4.13
1,000 : $3.8

6,000

MC74VHC4051DTR2G

onsemi

Analog Multiplexer/Demultiplexer
RoHS : Compliant

1 : $0.41
100 : $0.27
500 : $0.22
1,000 : $0.2

2,500

C40L-AF5-R Distributor

Link URL