| Electronic Components Datasheet Search |
|
C26-AF5-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() Analog Devices Inc | LTC2631CTS8-LZ8#TRPBF | Analog Devices Inc | 1x 12-/10-/8-B I2C VOUT DACs w RoHS : Compliant |
| 35,000 | |
| LTC2631HTS8-LM10#TRMPBF | Analog Devices Inc | 1x 12-/10-/8-B I2C VOUT DACs w RoHS : Compliant |
| 7,000 | ||
| LTC2633CTS8-LX12#TRMPBF | Analog Devices Inc | 2x 12-/10-/8-B I2C VOUT DACs w RoHS : Compliant |
| 6,500 | ||
| LTC2611CDD-1#PBF | Analog Devices Inc | 14-B R2R DACs in 10-Lead DFN RoHS : Compliant |
| 6,171 | ||
| LTC2633HTS8-LZ8#TRMPBF | Analog Devices Inc | 2x 12-/10-/8-B I2C VOUT DACs w RoHS : Compliant |
| 780 | ||
| LTC2630CSC6-HZ12#TRMPBF | Analog Devices Inc | 1x 12-/10-/8-B R2R DACs w/ Int RoHS : Compliant |
| 130 | ||
| DC2652A-B | Analog Devices Inc | LTC3888-1 Demo Board, Dual Out RoHS : Compliant |
| 25 | ||
| LTC2610CUFD#PBF | Analog Devices Inc | Octal 14-B R2R DACs in 16-Lead RoHS : Compliant |
| 9 | ||
| LTC2627IDE-1#TRPBF | Analog Devices Inc | 12-B 2x R2R w/ I2C Int RoHS : Compliant |
| 0 | ||
| LTC2630CSC6-HM10#TRPBF | Analog Devices Inc | 1x 12-/10-/8-B R2R DACs w/ Int RoHS : Compliant |
| 0 | ||
| LTC2631ACTS8-HM12#TRMPBF | Analog Devices Inc | 1x 12-/10-/8-B I2C VOUT DACs w RoHS : Compliant |
| 0 | ||
| LTC2632CTS8-HZ10#TRPBF | Analog Devices Inc | 2x 12-/10-/8-B SPI VOUT DACs w RoHS : Compliant |
| 0 | ||
| LTC2634CMSE-HZ10#PBF | Analog Devices Inc | 4x 12-/10-/8-B R2R DACs w/ 10p RoHS : Compliant |
| 0 | ||
| LTC2634HMSE-HMI8#TRPBF | Analog Devices Inc | 4x 12-/10-/8-B R2R DACs w/ 10p RoHS : Compliant |
| 0 | ||
| LTC2634HUD-HMI8#TRPBF | Analog Devices Inc | 4x 12-/10-/8-B R2R DACs w/ 10p RoHS : Compliant |
| 0 | ||
![]() ComSIT USA | CC2640R2FRHBR | AVAILABLE EU | 754 | |||
| UC2637DWTRG4 | TEXAS INSTRUMENTS INC | AVAILABLE EU | 757 | |||
| LTC2601IDDTRPBF | ANALOG DEVICES INC | AVAILABLE EU | 822 | |||
![]() ComSIT USA | MBB02070C2619FC100 | Vishay Intertechnologies | Fixed Resistor, Metal Film, 0.4W, 26.1ohm, 350V, 1% +/-Tol, 50ppm/Cel, Through Hole Mount RoHS : Compliant | 14,000 | ||
| KC5032C260000C3FESH | KYOCERA Corporation | Electronic Component RoHS : Compliant | 5,000 | |||
| HSMGC265CATL | Avago Technologies | Surface Mount ChipLED Single Color LED, Green, Untinted Nondiffused, 1.25mm RoHS : Compliant | 3,000 | |||
| LTC2621CDDTRPBF | Linear Technology | D/A-WANDLER, 12 BIT, DFN-10, 0 BIS 70C RoHS : Compliant | 1,495 | |||
CC2640R2FRGZT![]() | Texas Instruments | SIMPLELINK BLUETOOTH LOW ENERGY WIRELESS MCU Telecom Circuit, 1-Func, PQCC48 RoHS : Compliant | 345 | |||
| DLC26GDT3 | Kingbright | 20MM BIG LAMP Single Color LED Display Cluster, Green, 20mm RoHS : Compliant | 328 | |||
| TMP82C265BF10 | Toshiba America Electronic Components | Micro Peripheral IC RoHS : Not Compliant | 160 | |||
| TMS320C26BFN | Texas Instruments | Digital Signal Processor Floating Point Serial Port 68-LCC Tube RoHS : Not Compliant | 138 | |||
| TIC263M | Texas Instruments | 4 Quadrant Logic Level TRIAC, 600V V(DRM), 25A I(T)RMS RoHS : Not Compliant | 94 | |||
| CLL330MC26L1C | Citizen Finedevice Co Ltd | LED Engine and Module Chip On Board (COB) White 3000K RoHS : Not Compliant | 79 | |||
| LTC2642CMS16TRPBF | Linear Technology | Digital-to-analog converter (DAC), 16-bit, Linear Technology RoHS : Compliant | 50 | |||
| ALC262VD2GR | Realtek Semiconductor | Consumer Circuit, PQFP48 RoHS : Compliant | 44 | |||
| TMC260PA | Analog Devices Inc | POWER DRIVER FOR STEPPER MOTORS Stepper Motor Controller, 7A, CMOS, PQFP44 RoHS : Compliant | 21 | |||
| CY7C26525PC | Cypress Semiconductor | 8K X 8 REGISTERED PROM OTP ROM, 8KX8, 15ns, CMOS, PDIP28 RoHS : Not Compliant | 5 | |||
| SCC2681AC1A44512 | NXP Semiconductors | UART interface IC, NXP, DIP package RoHS : Not Compliant | 3 | |||
![]() GLYN GmbH & Co. KG | NL6448BC26-27 | Tianma Micro-electronics Co | TFT 8.40", 640x480, 500cd, LVDS | 6 | ||
| NL8060BC26-35F | Tianma Micro-electronics Co | TFT 10.40", 800x600, 800cd, LVDS | 1 | |||
![]() Interstate Connecting Components | CC2650-000 | TE Connectivity | B-106-1993CS50 | 0 | ||
| QWLD01R24C26P | Amphenol Aerospace | RECEPT 88-470030-26P | 0 | |||
| SGMC26M0EP00R | Amphenol Positronic | 0 | ||||
| SGMC26M0N00JVL/AA | Amphenol Positronic | 0 | ||||
| SGMC26S0ESS0000 | Amphenol Positronic | RECTANGULAR MIL SPEC CONNECTOR |
| 0 | ||
| QWLD03R18C26P | Amphenol Aerospace | RECEPT 88-435668-26P | 0 | |||
| DRC26-60S05 | TE Connectivity | PLG, 60P, BLK, N, 05 RoHS : Not Compliant | 0 | |||
| YABC26G-80PB000000 | TE Connectivity | PLUG ASSY | 0 | |||
| MUSBR2M1C267BP | Amphenol Commercial | MUSBR SERIES, USB TYPE C PANEL | 0 | |||
| CC2648-000 | TE Connectivity | B-106-1603CS50 RoHS : Compliant |
| 0 | ||
| ARC26-50S04 | Amphenol Sine Systems | 50 POSITION PLUG, SIZE 20 SOCK |
| 0 | ||
| QWLD00R24C26S | Amphenol Aerospace | RECEPT 88-445630-26S | 0 | |||
| QLC260R1-M01 | ITT Interconnect Solutions | QLC260R1-M01 | 0 | |||
| XAVAC26M/SS.1 | Amphenol Positronic | 0 | ||||
| CC2624-000 | TE Connectivity | B-106-1801CS100 | 0 | |||
![]() NexGen Digital | MIC2619YD6-TR | Microchip Technology Inc | RoHS : Compliant | 6,615 | ||
| TMC261C-PA-T | Analog Devices Inc | RoHS : Compliant | 1,500 | |||
| MIC2601YML-TR | Microchip Technology Inc | RoHS : Compliant | 200 | |||
| EC2600TS-33.000MTR | Ecliptek Corporation | RoHS : Compliant | 97 | |||
| TMC261C-PA | Analog Devices Inc | RoHS : Compliant | 92 | |||
| TMC261-PA | Analog Devices Inc | 41 | ||||
| TPIC2601KTC | Texas Instruments | 16 | ||||
| SC26C92A1A,518 | Philips E C G Inc | 12 | ||||
SC26C92C1B,551![]() | NXP Semiconductors | RoHS : Compliant | 7 | |||
| RN50C2612F | Vishay Dale | RoHS : Not Compliant | 7 | |||
![]() PEI Genesis | ZMK-100SHC26X | ITT Interconnect Solutions |
| 0 | ||
| ZMK-15SHC26Y | ITT Interconnect Solutions |
| 0 | |||
| 8D117ZC26SE | SOURIAU-SUNBANK |
| 0 | |||
| 8D713ZC26PN | SOURIAU-SUNBANK |
| 0 | |||
| 8DA513ZC26PC | SOURIAU-SUNBANK |
| 0 | |||
| MDM-100SHC26K-F222 | ITT Interconnect Solutions |
| 0 | |||
| MDM-25PHC26L-F222 | ITT Interconnect Solutions |
| 0 | |||
| MDM-25SHC26B-A174 | ITT Interconnect Solutions |
| 0 | |||
| MDM-37SHC26L-F222 | ITT Interconnect Solutions |
| 0 | |||
| MDM-9PHC26B-A174-F222 | ITT Interconnect Solutions |
| 0 | |||
| FCIBD38999/26ZC26PN-B45 | Filconn |
| 0 | |||
| ZMK-21SHC26Y-A174 | ITT Interconnect Solutions |
| 0 | |||
| 8D117ZC26PD | SOURIAU-SUNBANK |
| 0 | |||
| 8D117ZC26PC | SOURIAU-SUNBANK |
| 0 | |||
| 8D513ZC26PA | SOURIAU-SUNBANK |
| 0 | |||
![]() Powell Electronics | CC2624-000 | TE Connectivity | Connectors |
| 221 | |
| M55302/57C26Y/28 | AirBorn a molex company | Military Rectangular PCB Connector |
| 187 | ||
| M55302/57C26Y/16 | AirBorn a molex company | Military Rectangular PCB Connector |
| 187 | ||
| M55302/57C26Y/61 | AirBorn a molex company | Military Rectangular PCB Connector |
| 187 | ||
| M55302/57C26Y/15 | AirBorn a molex company | Military Rectangular PCB Connector |
| 187 | ||
| M55302/57C26Y/60 | AirBorn a molex company | Military Rectangular PCB Connector |
| 187 | ||
| M55302/57C26Y/38 | AirBorn a molex company | Military Rectangular PCB Connector |
| 187 | ||
| M55302/63C26Y/10 | AirBorn a molex company | Military Rectangular PCB Connector |
| 77 | ||
| M55302/63C26Y/47 | AirBorn a molex company | Military Rectangular PCB Connector |
| 77 | ||
| M55302/63C26Y/35 | AirBorn a molex company | Military Rectangular PCB Connector |
| 77 | ||
| M55302/63C26Y/34 | AirBorn a molex company | Military Rectangular PCB Connector |
| 77 | ||
| M55302/63C26Y/20 | AirBorn a molex company | Military Rectangular PCB Connector |
| 77 | ||
| M55302/62LC26H | AirBorn a molex company | MIL-DTL-55302 Series Connector |
| 48 | ||
| M55302/64LC26F | AirBorn a molex company | MIL-DTL-55302 Series Connector |
| 48 | ||
| M55302/64-C26X | AirBorn a molex company | MIL-DTL-55302 Series Connector |
| 48 | ||
![]() PUI | TV50C260JB-G | 3,000 | ||||
![]() Rutronik | MMA02040C2672FB300 | Vishay Intertechnologies | MM0204 26,7K 1% 0,4W TK50 RoHS : Compliant |
| 12,000 | |
| TC264D40F200NBCKXUMA2 | Infineon Technologies AG | TriCore 2560K LQFP-144 125°C RoHS : Compliant |
| 3,000 | ||
| LTC2621G | Lite-On Semiconductor Corporation | 7-SEG.DISPL.GREEN 3DIGIT 7MM RoHS : Compliant |
| 1,060 | ||
| JC26A-BB16E | JAE Electronics | 50P CF-Card Header SMT RoHS : Compliant |
| 200 | ||
| LTC-2621E | Lite-On Semiconductor Corporation | 7-SEG.DISPL.RED ORANGE 3DIGIT RoHS : Compliant |
| 6 | ||
![]() Chip 1 Exchange | CC2652R74T0RGZR | Texas Instruments | INSTOCK RoHS : Compliant | 15,402 | ||
| CRCW1206 BC 2,67KOHM | Vishay Intertechnologies | INSTOCK | 5,000 | |||
| R82IC2680SW50M | Arcotronics Group | INSTOCK | 4,500 | |||
CC2640R2FRHBR![]() | Texas Instruments | INSTOCK RoHS : Compliant | 2,500 | |||
| FKC2-6800PF5%100V RM5 | INSTOCK | 1,419 | ||||
| ALC269Q-VB6-GR | Foxconn | INSTOCK | 643 | |||
| ALC269Q-VB6-GR | INSTOCK | 498 | ||||
| TMS380C26PQL | INSTOCK | 431 | ||||
TMS380C26PQL![]() | Texas Instruments | INSTOCK | 431 | |||
| CC2640R2FRHBR | INSTOCK | 110 | ||||
| SCC2692-AC1A44 | NXP Semiconductors | INSTOCK | 70 | |||
| C2/680PF | INSTOCK | 46 | ||||
| SCC2692-AC1A44 | Philips Semiconductors | INSTOCK | 24 | |||
| MINISMDC260F/16-2 | TE Connectivity | INSTOCK RoHS : Compliant | 15 | |||
| LTC2630ISC6-LZ8#TRMPBF | LTECH | INSTOCK | 5 | |||
![]() Avnet Silica | STP16CPC26MTR | STMicroelectronics | LED DRVR 5V 24Pin SOIC TR (Alt: STP16CPC26MTR) RoHS : Compliant | 15,000 | ||
| FDMC2610 | onsemi | NChannel UltraFET Trench MOSFET 200V 95A 200mO (Alt: FDMC2610) RoHS : Compliant | 0 | |||
| KSC2690AYS | onsemi | NPN Epitaxial Silicon Transistor ONSSPCTRNSTLT1T0R (Alt: KSC2690AYS) RoHS : Compliant | 0 | |||
| MIC2602YML-TR | Microchip Technology Inc | (Alt: MIC2602YML-TR) RoHS : Compliant | 0 | |||
| XC9276BC260R-G | Torex Semiconductor LTD | (Alt: XC9276BC260R-G) RoHS : Compliant | 0 | |||
| XC61CC2602MR-G | Torex Semiconductor LTD | Voltage Detector 1 Monitor 26 V PushPull SOT233 40 C to 85 C 07 V to 10 V Supply (Alt: XC61CC2602MR-G) RoHS : Compliant | 0 | |||
| XC6136C26AMR-G | Torex Semiconductor LTD | (Alt: XC6136C26AMR-G) RoHS : Compliant | 0 | |||
| MIC26603YJL-TR | Microchip Technology Inc | Conv DCDC Single Step Down 45V 28V 28Pin VQFN TR (Alt: MIC26603YJL-TR) RoHS : Compliant | 0 | |||
| XC6108C26AGR-G | Torex Semiconductor LTD | (Alt: XC6108C26AGR-G) RoHS : Compliant | 0 | |||
| XC6120C262SR-G | Torex Semiconductor LTD | (Alt: XC6120C262SR-G) RoHS : Compliant | 0 | |||
| TC54VC2602EMB713 | Microchip Technology Inc | Volt Supervisor Detect 11V to 6V 4Pin3Tab SOT89 TR (Alt: TC54VC2602EMB713) RoHS : Compliant | 0 | |||
MIC26903-ZAYJL-TR![]() | Microchip Technology Inc | Conv DCDC Single Step Down 45V 28V 28Pin VQFN TR (Alt: MIC26903-ZAYJL-TR) RoHS : Compliant | 0 | |||
AT32UC3C264C-Z2UT![]() | Microchip Technology Inc | (Alt: AT32UC3C264C-Z2UT) RoHS : Compliant | 0 | |||
| MCP6C26T-050E/LTY | Microchip Technology Inc | (Alt: MCP6C26T-050E/LTY) RoHS : Compliant | 0 | |||
| MIC261203-ZYJL-TR | Microchip Technology Inc | (Alt: MIC261203-ZYJL-TR) RoHS : Compliant | 0 | |||
![]() Braemac Americas-Symmetry | EC2600TS-5.000M TR | Abracon Corporation | Standard Clock Oscillator 5.000MHz SMD 5.0mm x 7.0mm 100ppm -10C to +70C |
| 0 | |
| EC2645ETTS-50.000M TR | Abracon Corporation | Standard Clock Oscillator 50.000MHz SMD 5.0mm x 7.0mm 50ppm -40C to +85C |
| 0 | ||
| EC2645TTS-106.250M TR | Abracon Corporation | Standard Clock Oscillator 106.250MHz SMD 5.0mm x 7.0mm 50ppm -10C to +70C |
| 0 | ||
| EC2600ETTTS-50.000M TR | Abracon Corporation | Standard Clock Oscillator 50.000MHz SMD 5.0mm x 7.0mm 100ppm -40C to +85C |
| 0 | ||
| EC2645ETTTS-18.432M TR | Abracon Corporation | Standard Clock Oscillator 18.432MHz SMD 5.0mm x 7.0mm 50ppm -40C to +85C |
| 0 | ||
| EC2600TS-33.000M TR | Abracon Corporation | Standard Clock Oscillator 33.000MHz SMD 5.0mm x 7.0mm 100ppm -10C to +70C |
| 0 | ||
| EC2625ETTS-2.048M TR | Abracon Corporation | Standard Clock Oscillator 2.048MHz SMD 5.0mm x 7.0mm 25ppm -40C to +85C |
| 0 | ||
| EC2645ETTS-66.666M TR | Abracon Corporation | Standard Clock Oscillator 66.666MHz SMD 5.0mm x 7.0mm 50ppm -40C to +85C |
| 0 | ||
| EC2645TTS-50.000M TR | Abracon Corporation | Standard Clock Oscillator 50.000MHz SMD 5.0mm x 7.0mm 50ppm -10C to +70C |
| 0 | ||
| EC2645ETTS-16.000M TR | Abracon Corporation | Standard Clock Oscillator 16.000MHz SMD 5.0mm x 7.0mm 50ppm -40C to +85C |
| 0 | ||
| EC2625ETTS-32.000M TR | Abracon Corporation | Standard Clock Oscillator 32.000MHz SMD 5.0mm x 7.0mm 25ppm -40C to +85C |
| 0 | ||
| EC2645ETTTS-25.000M TR | Abracon Corporation | Standard Clock Oscillator 25.000MHz SMD 5.0mm x 7.0mm 50ppm -40C to +85C |
| 0 | ||
| EC2645TS-40.000M TR | Abracon Corporation | Standard Clock Oscillator 40.000MHz SMD 5.0mm x 7.0mm 50ppm -10C to +70C |
| 0 | ||
| EC2600TS-48.000M TR | Abracon Corporation | Standard Clock Oscillator 48.000MHz SMD 5.0mm x 7.0mm 100ppm -10C to +70C |
| 0 | ||
| EC2625ETTS-50.000M TR | Abracon Corporation | Standard Clock Oscillator 50.000MHz SMD 5.0mm x 7.0mm 25ppm -40C to +85C |
| 0 | ||
![]() Component Electronics, Inc | MF25C26R1FT | IBS Electronics Inc | IN STOCK SHIP TODAY RoHS : Unknown |
| 10,000 | |
| MF25C2613FT | IBS Electronics Inc | IN STOCK SHIP TODAY RoHS : Unknown |
| 9,800 | ||
| MF25C26R7FT | IBS Electronics Inc | IN STOCK SHIP TODAY |
| 4,900 | ||
| MBB02070C2610FRP00 | Vishay Intertechnologies | IN STOCK SHIP TODAY RoHS : Compliant |
| 4,750 | ||
| CPC-C2-63V-1N0 | Vishay BCcomponents | IN STOCK SHIP TODAY |
| 2,628 | ||
| WSC-2-6.8R-5% | Vishay Dale | IN STOCK SHIP TODAY |
| 1,748 | ||
| MBB02070C2678FRP00 | Vishay Intertechnologies | IN STOCK SHIP TODAY RoHS : Compliant |
| 1,283 | ||
| CPC-C2-63V-10N | Vishay BCcomponents | IN STOCK SHIP TODAY |
| 1,000 | ||
| HC26VR | Hubbell Premise Wiring | IN STOCK SHIP TODAY |
| 46 | ||
V48A3V3C264BG![]() | Vicor Power | IN STOCK SHIP TODAY RoHS : Compliant |
| 8 | ||
| SC2614MLTR | Semitech Semiconductor | IN STOCK SHIP TODAY |
| 7 | ||
| E1100AMC-26.666MHZ | Ecliptek Corporation | IN STOCK SHIP TODAY | 2 | |||
| C26 | KRAUS | IN STOCK SHIP TODAY |
| 1 | ||
| C26-A3X378 | KRAUS | IN STOCK SHIP TODAY |
| 1 | ||
| MC2652P | Motorola Semiconductor Products | IN STOCK SHIP TODAY RoHS : Not Compliant | 1 | |||
![]() Pasternack Enterprises US | PE3C2661/HS-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240-DB, RF Cable Type: LMR-240-DB, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. TNC Male to TNC Male Low Loss Cable 60 Inch Length Using LMR-240-DB Coax with HeatShrink., Radio frequency assembly TNC male to TNC male low loss cable 60 inch length using LMR-240-DB coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to TNC male low loss cable 60 inch length using LMR-240-DB coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with TNC cable connection on one end and TNC cable connection on the other. Our low loss TNC to TNC cable assemblies have a male gender on end 1 and male on end 2. PE3C2661/HS-60 can also be known as a low loss TNC plug to TNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC plug cable assembly PE3C2661/HS-60 is built with LMR-240-DB which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency TNC male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss TNC plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to TNC male low loss cable 60 inch length using LMR-240-DB coax with heatshrink. |
| 1,883 | |
| PE3C2603LF/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600, RF Cable Type: LMR-600, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. N Male to N Male Low Loss Cable 24 Inch Length Using LMR-600 Coax with Times Microwave Components with HeatShrink, LF Solder., Radio frequency assembly N male to N male low loss cable 24 inch length using LMR-600 coax with Times Microwave components with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 24 inch length using LMR-600 coax with Times Microwave components with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and type N cable connection on the other. Our low loss N type to type N cable assemblies have a male gender on end 1 and male on end 2. PE3C2603LF/HS-24 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped same-day as it is purchased. N type plug to N type plug cable assembly PE3C2603LF/HS-24 is built with LMR-600 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency N type male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss type N plug to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male low loss cable 24 inch length using LMR-600 coax with Times Microwave components with heatshrink, LF solder. |
| 81 | ||
| PE3C2613 | Pasternack Enterprises | 0 | ||||
| PE3C2645LF/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMB Plug Right Angle to N Male Low Loss Cable 24 Inch Length Using LMR-100 Coax with HeatShrink, LF Solder., Radio frequency assembly SMB plug right angle to N male low loss cable 24 inch length using LMR-100 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMB plug right angle to N male low loss cable 24 inch length using LMR-100 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMB to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMB cable connection on one end and a type N cable connection on the other. Our low loss right angle SMB to type N cable assembly has a plug gender on end 1 and a male on end 2. PE3C2645LF/HS-24 can also be known as a low loss right angle SMB male to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C2645LF/HS-24 RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our right angle SMB plug to type N male cable has a maximum VSWR of 1.4:1. SMB male to type N plug cable assembly PE3C2645LF/HS-24 is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with right angle SMB to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C2645LF/HS-24 can also be used in the other direction and will be a type N male to right angle SMB plug cable assembly if the opposite connectivity is required. Low loss SMB right angle male to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMB to type N cable assembly for quick shipment worldwide. Variations of SMB and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMB to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C2651LF | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm. N Male to BNC Male Cable Using LMR-400 Coax, LF Solder, RoHS. PE3C2651LF is a N male to BNC male cable using LMR-400 coax. This Pasternack N male to BNC male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm BNC for connector 2. Our male N to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C2651LF N male to BNC male cable assembly is constructed with LMR-400 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3C2680/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to SMA Female Bulkhead Cable Using RG400 Coax with HeatShrink. PE3C2680/HS is a SMA male right angle to SMA female bulkhead cable using RG400 coax. This Pasternack SMA male right angle to SMA female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. SMA right angle to SMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to female SMA bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C2680/HS SMA male right angle to SMA female bulkhead cable assembly is constructed with RG400 coax. | 0 | |||
| PE3C2695 | Pasternack Enterprises | 0 | ||||
| PE3C2605/HS-240 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600-DB, RF Cable Type: LMR-600-DB, RF Cable Impedance: 50 Ohm, Length, Max: 240 inches. N Male to N Male Low Loss Cable 240 Inch Length Using LMR-600-DB Coax With Times Microwave Components with HeatShrink., Radio frequency assembly N male to N male low loss cable 240 inch length using LMR-600-DB coax with Times Microwave components with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 240 inch length using LMR-600-DB coax with Times Microwave components with heatshrink, N type cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and type N cable connection on the other. Our low loss type N to N type cable assemblies have a male gender on end 1 and male on end 2. PE3C2605/HS-240 can also be known as a low loss type N plug to N type plug cable assembly and will be shipped same-day as it is purchased. Type N plug to type N plug cable assembly PE3C2605/HS-240 is built with LMR-600-DB which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N male to N type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss type N plug to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male low loss cable 240 inch length using LMR-600-DB coax with Times Microwave components with heatshrink. |
| 0 | ||
| PE3C2638/WP-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 48 inches. Waterproof IP68 TNC Male to TNC Male Right Angle Low Loss Cable 48 Inch Length Using LMR-400 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 TNC male to TNC male right angle low loss cable 48 inch length using LMR-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a TNC cable connection on one end and a right angle TNC cable connection on the other. Our low loss TNC to right angle TNC IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C2638/WP-48 can also be known as a low loss TNC plug to right angle TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C2638/WP-48 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our TNC male to right angle TNC male cable has a maximum VSWR of 1.4:1. TNC plug to TNC plug cable assembly PE3C2638/WP-48 is built with LMR-400 which is a flexible coax type. The Pasternack IP68 flexible TNC cable assembly is manufactured with TNC to right angle TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C2638/WP-48 can also be used in the other direction and will be a right angle TNC male to TNC male cable assembly if the opposite connectivity is required. Low loss TNC plug to TNC right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC Waterproof cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C2646/HS | Pasternack Enterprises | 0 | ||||
| PE3C2657/HS-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male Right Angle to SMA Male Cable 12 Inch Length Using PE-SR402FL Coax with HeatShrink., Radio frequency assembly SMA male right angle to SMA male cable 12 inch length using PE-SR402FL coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male right angle to SMA male cable 12 inch length using PE-SR402FL coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and SMA cable connection on the other. Our right angle SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3C2657/HS-12 can also be known as a right angle SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3C2657/HS-12 is built with PE-SR402FL which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 12.4 GHz maximum frequency SMA right angle male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2657/HS-12 can also be used in the other direction and will be SMA male to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMA male cable 12 inch length using PE-SR402FL coax with heatshrink. |
| 0 | ||
| PE3C2680LF | Pasternack Enterprises | 0 | ||||
| PE3C2604-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402AL, RF Cable Type: PE-SR402AL, RF Cable Impedance: 50 Ohm, Length: 24 inches. SMA Male Right Angle to TNC Female Bulkhead Cable 24 Inch Length Using PE-SR402AL Coax., Radio frequency assembly SMA male right angle to TNC female bulkhead cable 24 inch length using PE-SR402AL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male right angle to TNC female bulkhead cable 24 inch length using PE-SR402AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and TNC bulkhead cable connection on the other. Our right angle SMA to TNC cable assemblies have a male gender on end 1 and female on end 2. This SMA to TNC cable is a male to female coax assembly, PE3C2604-24, can also be known as a right angle SMA plug to TNC jack cable assembly and will be shipped same-day as it is purchased. SMA plug to TNC jack cable assembly PE3C2604-24 is built with PE-SR402AL which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with right angle SMA to TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency SMA right angle male to TNC female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2604-24 can also be used in the other direction and will be TNC female bulkhead to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to TNC jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to TNC female bulkhead cable 24 inch length using PE-SR402AL coax. |
| 0 | ||
| PE3C2644-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: HN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG213/U, RF Cable Type: RG213, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. HN Male to HN Male Right Angle Cable 48 Inch Length Using RG213 Coax., Radio frequency assembly HN male to HN male right angle cable 48 inch length using RG213 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The HN male to HN male right angle cable 48 inch length using RG213 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HN to HN cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with HN cable connection on one end and right angle HN cable connection on the other. Our HN to right angle HN cable assembly has male gender on end 1 and male on end 2. PE3C2644-48 can also be known as a HN plug to right angle HN plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and PE dielectric type. HN plug to HN plug cable assembly PE3C2644-48 is built with RG213 which is a flexible coax type. The Pasternack flexible HN cable assembly is manufactured with HN to right angle HN cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE3C2644-48 RF cable are available on our downloadable PDF datasheet.PE3C2644-48 can also be used in the other direction and will be right angle HN male to HN male cable assembly if the opposite connectivity is required. HN plug to HN right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HN to HN cable assembly for quick shipment worldwide. Variations of HN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal HN RF cable assembly as per your requirements. |
| 0 | ||
| PE3C2650LF-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: UHF, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. N Male to UHF Male Low Loss Cable 36 Inch Length Using LMR-400 Coax, LF Solder., Radio frequency assembly N male to UHF male low loss cable 36 inch length using LMR-400 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to UHF male low loss cable 36 inch length using LMR-400 coax, LF solder, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to UHF cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type cable connection on one end and UHF cable connection on the other. Our low loss type N to UHF cable assemblies have a male gender on end 1 and male on end 2. PE3C2650LF-36 can also be known as a low loss type N plug to UHF plug cable assembly and will be shipped same-day as it is purchased. N type plug to UHF plug cable assembly PE3C2650LF-36 is built with LMR-400 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to UHF cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this type N male to UHF male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2650LF-36 can also be used in the other direction and will be UHF male to N type male cable assembly if the opposite connectivity is required. Low loss type N plug to UHF plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to UHF cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to UHF male low loss cable 36 inch length using LMR-400 coax, LF solder. |
| 0 | ||
![]() TE Connectivity | DRC26-50BT | TE Connectivity | BOOT, 50P, 20SZ, PLG/REC, ST, BLK Number of Positions: 50 Primary Product Color: Black Protection & Strain Relief Accessory Type: Boot Primary Product Material: PVC Cable Exit Angle: 180 ° 50 Black Boot PVC | TE Connectivity RoHS : Compliant |
| 925 | |
| DRC26-50S04 | TE Connectivity | PLG, 50P, BLK, N, 04 Nominal Voltage Architecture: 24 V 12 V 48 V Number of Positions: 50 Connector & Housing Type: Housing for Female Terminals Connector System: Wire-to-Wire Mating Pin Diameter: 1.02 mm Ampseal Header | 24 V 50 | 1.02 mm | TE Connectivity RoHS : Compliant |
| 361 | ||
| DRC26-40SB | TE Connectivity | PLG, 40P, BLK, B Nominal Voltage Architecture: 12 V 24 V 48 V Number of Positions: 40 Connector & Housing Type: Housing for Female Terminals Connector System: Wire-to-Wire Mating Pin Diameter: 1.02 mm Ampseal Header | 12 V 40 | 1.02 mm | TE Connectivity RoHS : Compliant |
| 159 | ||
| DRC26-60S04 | TE Connectivity | PLG, 60P, BLK, N, 04 Nominal Voltage Architecture: 48 V 12 V 24 V Number of Positions: 60 Connector & Housing Type: Housing for Female Terminals Connector System: Wire-to-Wire Mating Pin Diameter: 1.02 mm Ampseal Header | 48 V 60 | 1.02 mm | TE Connectivity RoHS : Compliant |
| 87 | ||
| DRC26-50S05 | TE Connectivity | PLG, 50P, BLK, N, 05 Nominal Voltage Architecture: 48 V 24 V 12 V Number of Positions: 50 Connector & Housing Type: Housing for Female Terminals Connector System: Wire-to-Wire Mating Pin Diameter: 1.02 mm Ampseal Header | 48 V 50 | 1.02 mm | TE Connectivity RoHS : Compliant |
| 59 | ||
| FN3287-16-44-C26-R65 | TE Connectivity | FN3287-16-44-C26-R65 Current Rating: 16 A Input Termination Type: Terminal Block Output Termination Type: Terminal Block Wiring Configuration: DELTA (3 wire + ground) Operating Voltage: 480 VAC 16 A Terminal Block DELTA (3 wire + ground) | TE Connectivity RoHS : Compliant |
| 26 | ||
| PRMAC-26X | TE Connectivity | PRMAC-26X=PRMA COTS TO-5 RELAY Relay & Contactor Type: General Purpose Signal Relay Current Type: DC Coil Magnetic System: Non-Polarized, Monostable Contact Arrangement: 2 Form C DPDT-CO Contact Current Rating: 1 A General Purpose Signal Relay DC Non-Polarized, Monostable 2 Form C DPDT-CO | TE Connectivity RoHS : Compliant |
| 21 | ||
| DRC26-60S06 | TE Connectivity | PLG, 60P, BLK, N, 06 Nominal Voltage Architecture: 48 V 12 V 24 V Number of Positions: 60 Connector & Housing Type: Housing for Female Terminals Connector System: Wire-to-Wire Mating Pin Diameter: 1.02 mm Ampseal Header | 48 V 60 | 1.02 mm | TE Connectivity RoHS : Compliant |
| 20 | ||
| DRC26-50S07 | TE Connectivity | PLG, 50P, BLK, N, 07 Nominal Voltage Architecture: 48 V 12 V 24 V Number of Positions: 50 Connector & Housing Type: Housing for Female Terminals Connector System: Wire-to-Wire Mating Pin Diameter: 1.02 mm Ampseal Header | 48 V 50 | 1.02 mm | TE Connectivity RoHS : Compliant |
| 15 | ||
| FN3287-40-33-C26-R65 | TE Connectivity | FN3287-40-33-C26-R65 Current Rating: 40 A Input Termination Type: Terminal Block Output Termination Type: Terminal Block Wiring Configuration: DELTA (3 wire + ground) Operating Voltage: 480 VAC 40 A Terminal Block DELTA (3 wire + ground) | TE Connectivity RoHS : Compliant |
| 14 | ||
| FN3287-80-34-C26-R65 | TE Connectivity | FN3287-80-34-C26-R65 Current Rating: 80 A Input Termination Type: Terminal Block Output Termination Type: Terminal Block Wiring Configuration: DELTA (3 wire + ground) Operating Voltage: 480 VAC 80 A Terminal Block DELTA (3 wire + ground) | TE Connectivity RoHS : Compliant |
| 5 | ||
| FN3287-20-33-C26-R65 | TE Connectivity | FN3287-20-33-C26-R65 Current Rating: 20 A Input Termination Type: Terminal Block Output Termination Type: Terminal Block Wiring Configuration: DELTA (3 wire + ground) Operating Voltage: 480 VAC 20 A Terminal Block DELTA (3 wire + ground) | TE Connectivity RoHS : Compliant |
| 4 | ||
| DRC26-40SC | TE Connectivity | PLG, 40P, BLK, C Nominal Voltage Architecture: 12 V 24 V 48 V Number of Positions: 40 Connector & Housing Type: Housing for Female Terminals Connector System: Wire-to-Wire Mating Pin Diameter: 1.02 mm Ampseal Header | 12 V 40 | 1.02 mm | TE Connectivity RoHS : Compliant |
| 3 | ||
| FN3287-125-35-C26-R65 | TE Connectivity | FN3287-125-35-C26-R65 Current Rating: 125 A Input Termination Type: Terminal Block Output Termination Type: Terminal Block Wiring Configuration: DELTA (3 wire + ground) Operating Voltage: 480 VAC 125 A Terminal Block DELTA (3 wire + ground) | TE Connectivity RoHS : Compliant |
| 1 | ||
| FN3287-160-40-C26-R65 | TE Connectivity | FN3287-160-40-C26-R65 Current Rating: 160 A Input Termination Type: Terminal Block Output Termination Type: Terminal Block Wiring Configuration: DELTA (3 wire + ground) Operating Voltage: 480 VAC 160 A Terminal Block DELTA (3 wire + ground) | TE Connectivity RoHS : Compliant |
| 1 | ||
![]() Venkel Ltd. | MELFC0204-ZC-2612CT | VENKEL LTD | MELF Coated Thin Film CR;0204;2/5W;�50PPM;26.1K;�0.25% RoHS : Compliant | 0 | ||
| MELFC0204-ZC-2673FT | VENKEL LTD | MELF Coated Thin Film CR;0204;2/5W;�50PPM;267K;�1% RoHS : Compliant | 0 | |||
| MELFC0207-VC-26R1DT | VENKEL LTD | MELF Coated Thin Film CR;0207;1/2W;�50PPM;26.1R;�0.5% RoHS : Compliant | 0 | |||
| MELFC0207-XC-2614DT | VENKEL LTD | MELF Coated Thin Film CR;0207;1W;�50PPM;2.61M;�0.5% RoHS : Compliant | 0 | |||
| MELFM0204-TC-2611BT | VENKEL LTD | MELF Molded Thin Film CR;0204;1/4W;�50PPM;2.61K;�0.1% RoHS : Not Compliant | 0 | |||
| MELFM0204-TC-26R7CT | VENKEL LTD | MELF Molded Thin Film CR;0204;1/4W;�50PPM;26.7R;�0.25% RoHS : Not Compliant | 0 | |||
| MELFM0204-ZC-2672CT | VENKEL LTD | MELF Molded Thin Film CR;0204;2/5W;�50PPM;26.7K;�0.25% RoHS : Not Compliant | 0 | |||
| MELFM0207-VC-2612BT | VENKEL LTD | MELF Molded Thin Film CR;0207;1/2W;�50PPM;26.1K;�0.1% RoHS : Not Compliant | 0 | |||
| MELFM0207-XC-2610BT | VENKEL LTD | MELF Molded Thin Film CR;0207;1W;�50PPM;261R;�0.1% RoHS : Not Compliant | 0 | |||
| TFCR0402-16W-C-2641CT-1K | VENKEL LTD | Thin Film CR;0402;1/16W;�50PPM;2.64K;�0.25% RoHS : Compliant | 0 | |||
| TFCR0603-16W-C-2670CT | VENKEL LTD | Thin Film CR;0603;1/16W;�50PPM;267R;�0.25% RoHS : Compliant | 0 | |||
| TFCR0603-16W-C-2671CT-1K | VENKEL LTD | Thin Film CR;0603;1/16W;�50PPM;2.67K;�0.25% RoHS : Compliant | 0 | |||
| TFCR0805-10W-C-2642FT | VENKEL LTD | Thin Film CR;0805;1/10W;�50PPM;26.4K;�1% RoHS : Compliant | 0 | |||
| TFCR0805-10W-C-2671DT | VENKEL LTD | Thin Film CR;0805;1/10W;�50PPM;2.67K;�0.5% RoHS : Compliant | 0 | |||
| TFCR0805-10W-C-26R7BT-1K | VENKEL LTD | Thin Film CR;0805;1/10W;�50PPM;26.7R;�0.1% RoHS : Compliant | 0 | |||
![]() Wuhan P&S | FDC2612 | onsemi | N-CH PowerTrenchMOSFET 200V,1.1A,725m�� RoHS : Compliant |
| 66,000 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |