 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
C201FST Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
 STMicroelectronics | ESDALC20-1BF4 | STMicroelectronics | Low clamping, low capacitance bidirectional single line ESD protection RoHS : Compliant |
| 25,455 | |
| TSC2012IST | STMicroelectronics | High voltage, precision, bidirectional current sense amplifier RoHS : Compliant |
| 9,317 | ||
| TSC2012HYDT | STMicroelectronics | High voltage, precision, bidirectional current sense amplifier RoHS : Compliant |
| 7,223 | ||
| TSC2010HYDT | STMicroelectronics | High temperature, high voltage, precision, bidirectional current sense amplifiers RoHS : Compliant |
| 5,412 | ||
| TSC2012IYST | STMicroelectronics | High voltage, precision, bidirectional current sense amplifier RoHS : Compliant |
| 4,013 | ||
| TSC2010IDT | STMicroelectronics | High voltage, precision, bidirectional current sense amplifier RoHS : Compliant |
| 3,103 | ||
| TSC2011IYDT | STMicroelectronics | High voltage, precision, bidirectional current sense amplifier RoHS : Compliant |
| 3,060 | ||
| TSC201IDT | STMicroelectronics | High voltage, current sense amplifier with open drain comparator and ref RoHS : Compliant |
| 2,474 | ||
| TSC201IYDT | STMicroelectronics | High voltage, current sense amplifier with open drain comparator and ref RoHS : Compliant |
| 2,461 | ||
| TSC2011IDT | STMicroelectronics | High voltage, precision, bidirectional current sense amplifier RoHS : Compliant |
| 2,410 | ||
| TSC2012IYDT | STMicroelectronics | High voltage, precision, bidirectional current sense amplifier RoHS : Compliant |
| 2,148 | ||
| TSC2010IYDT | STMicroelectronics | High voltage, precision, bidirectional current sense amplifier RoHS : Compliant |
| 2,051 | ||
| TSC2011HYDT | STMicroelectronics | High voltage, precision, bidirectional current sense amplifier RoHS : Compliant |
| 1,185 | ||
| TSC2011IST | STMicroelectronics | High voltage, precision, bidirectional current sense amplifier RoHS : Compliant |
| 1,017 | ||
| TSC2011IYST | STMicroelectronics | High voltage, precision, bidirectional current sense amplifier RoHS : Compliant |
| 109 | ||
 Bisco Industries | BPE-SC-2-01 | Essentra Components | RoHS : Compliant | 3,025 | ||
| C2016.21.01 | General Cable Technologies Corporation | 1,000 | ||||
| 3076-C-201-AL-6 | RAF Electronic Hardware | 540 | ||||
| PC2016 | Duracell Inc | 240 | ||||
| C2012 | Heyco | RoHS : Compliant | 140 | |||
| AN960C2016 | AN Washers | 95 | ||||
| MS24693-C201 | Crescent Manufacturing | 45 | ||||
| NAS75C20-104 | Mayday Manufacturing | 44 | ||||
| C201-18D | Accuride International | 11 | ||||
| AN960XC2016 | AN Washers | 6 | ||||
| C201-12D | Accuride International | 5 | ||||
| C201-20D | Accuride International | 1 | ||||
| LWC201512 | nVent Hoffman | 1 | ||||
| PL75C-201 | Cinch Connectivity Solutions | RoHS : Compliant | 1 | |||
 Rochester Electronics | BZX84J-C20,115 | NXP Semiconductors | Zener Diode Single 20V 550mW SOD-323 T/R RoHS : Compliant |
| 23,850 | |
BZV49-C20,115 | NXP Semiconductors | Zener Diode Single 20V 1W SOT89 T/R RoHS : Compliant |
| 550 | ||
BZX585-C20,115 | NXP Semiconductors | Zener Diode Single 20V 300mW SOD-523 T/R RoHS : Compliant |
| 4,499 | ||
BZX84J-C20,115 | Nexperia | Zener Diode Single 20V 550mW SOD-323 T/R RoHS : Compliant |
| 124,400 | ||
BZX585-C20,115 | Nexperia | Zener Diode Single 20V 300mW SOD-523 T/R RoHS : Compliant |
| 24,000 | ||
CY8C20110-SX2I | Cypress Semiconductor | IC CAPACITIVE TOUCH SENSOR Buttons I²C 2.4V - 5.25V 16-SOIC Tube RoHS : Compliant |
| 18 | ||
CY8C201A0-LDX2I | Cypress Semiconductor | IC CAPACITIVE TOUCH SENSOR Buttons, Slider I²C 2.4V - 5.25V 16-QFN Tray RoHS : Compliant |
| 4,180 | ||
| DS1100LC-201/TR | Maxim Integrated Products | Delay Line IC Nonprogrammable 40.2ns 8-SOIC T/R RoHS : Not Compliant |
| 2,500 | ||
| MIC2013-0.5YML TR | Micrel Inc | Power Distribution Switch USB Switch P-Channel 1 OUT High Side 6-SON T/R RoHS : Compliant |
| 4,085 | ||
| MIC2014-0.5YM5 TR | Micrel Inc | Power Distribution Switch USB Switch P-Channel 1 OUT High Side SOT-23-5 T/R RoHS : Compliant |
| 41 | ||
| MIC2015-0.8YML TR | Micrel Inc | Power Distribution Switch USB Switch P-Channel 1 OUT High Side 6-SON T/R RoHS : Compliant |
| 1,491 | ||
| MC2016P | Motorola Mobility LLC | Logic IC Inverter 6 Element 5V 14-DIP Tray RoHS : Not Compliant |
| 10,800 | ||
| TSC2011IYST | STMicroelectronics | Current Sense Amplifier Single-Ended 620kHz 8-SOP T/R RoHS : Compliant |
| 3,849 | ||
| TSC2012IYST | STMicroelectronics | Current Sense Amplifier Single-Ended 490kHz 8-SOP T/R RoHS : Compliant |
| 0 | ||
| TSC201IDT | STMicroelectronics | Current Sense Amplifier Single-Ended 400kHz 8-SOIC T/R RoHS : Compliant |
| 7,500 | ||
 Sager | RAC20-15SK | RECOM Power GmbH | AC/DC Power Modules 20W 85-264Vin 15Vout 1.333A RoHS : Compliant |
| 222 | |
| REC20-1215D | RECOM Power GmbH | Isolated DC/DC Converters - Through Hole 20W 9-18Vin 5.1Vout 4000mA RoHS : Compliant | 0 | |||
ATS-10C-201-C1-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,COARSE-PITCH,XCUT, HOLE PATTERN:4-CORNER,BLUE,NO TIM |
| 0 | ||
| ATS-13C-201-C2-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,COARSE-PITCH,XCUT, HOLE PATTERN:4-CORNER,BLUE,T766 |
| 0 | ||
| AAC2014-00 | TE Connectivity | TE Connectivity PC4D0042-1908NY-1-ZN | 0 | |||
| SCS200-SC12-00-01-C2-01 | E-T-A | SCS200, 12CH, SOLID STATE, 12VDC, W/O, W/INTEG TER RES, STD CONFIG |
| 0 | ||
| RGSCC201-R-B-B-E | Carling Technologies | Rocker Switches DPST OFF-NONE-ON |
| 0 | ||
| JC2-01-XBU1 | Carling Technologies | Toggle Switches | 0 | |||
| RGSCC201-R-B-B-H | Carling Technologies | Rocker Switches RGSCC201RBBH |
| 0 | ||
| LCC2/0-12-X | Panduit Corp | Terminals Copp Comp Lug 2H 2/0 AWG 1/2 RoHS : Compliant |
| 0 | ||
| ATS-19C-201-C3-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,COARSE-PITCH,XCUT, HOLE PATTERN:4-CORNER,BLUE,T412 RoHS : Compliant |
| 0 | ||
| ATS-06C-201-C3-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,COARSE-PITCH,XCUT, HOLE PATTERN:4-CORNER,BLUE,T412 RoHS : Compliant |
| 0 | ||
| EGAXT-50-C20104 | TE Connectivity | Thick Film Resistors - SMD EGAXT-50-/L5M | 0 | |||
| RGSEC201-R-B-B-A | Carling Technologies | Rocker Switches RGSEC201RBBA |
| 0 | ||
| ATS-20C-201-C2-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,COARSE-PITCH,XCUT, HOLE PATTERN:4-CORNER,BLUE,T766 RoHS : Compliant |
| 0 | ||
 TME | AC2010FK-0710RL | YAGEO Corporation | Resistor: thick film; 10Ω; SMD; 2010; 750mW; ±1%; AC; 5x2.5x0.55mm RoHS : Compliant |
| 196,000 | |
| RC2010JK-07150RL | YAGEO Corporation | Resistor: thick film; 150Ω; SMD; 2010; 750mW; ±5%; RC; 200V RoHS : Compliant |
| 12,000 | ||
| RC2010JK-0730RL | YAGEO Corporation | Resistor: thick film; 30Ω; SMD; 2010; 750mW; ±5%; RC; 5x2.5x0.55mm RoHS : Compliant |
| 3,995 | ||
| RC2010FK-07392RL | YAGEO Corporation | Resistor: thick film; 392Ω; 2010; 750mW; ±1%; RC; 5x2.5x0.55mm RoHS : Compliant |
| 3,369 | ||
| PWC2010-10RJPB | TT Electronics plc | Resistor: thick film; 10Ω; 5.1x2.5x0.8mm |
| 550 | ||
| RAC20-15SK | RECOM Power GmbH | Converter: AC/DC; 20W; Uin: 85÷264VAC,120÷370VDC; Uout: 15VDC; 86% RoHS : Compliant |
| 49 | ||
| CY8C20110-SX2I | Infineon Technologies AG | IC: driver/sensor; capacitive sensor; GPIO,I2C; 2.4÷5.25VDC; SO16 RoHS : Compliant |
| 48 | ||
| FAZ-C20/1-RT-DC | Eaton Corporation | Circuit breaker; 220VDC; Inom: 20A; Poles: 1; Charact: C; 10kA; IP20 |
| 0 | ||
| M12-C2012 20M | ABB Low Voltage Products and Systems | Cable: for sensors; M12; PIN: 5; 20m; plug; 36VDC; PVC; IP67,IP69K |
| 0 | ||
| KC2016Z11.2896C1KX00 | Kyocera AVX Components | Oscillator; 11.2896MHz; SMD; 2x1.6x0.8mm; 15pF; ±20ppm; 3.3VDC |
| 0 | ||
| RC2010FK-07100KL | YAGEO Corporation | Resistor: thick film; 100kΩ; SMD; 2010; ±1%; 200V; 0.75mm; -55÷155°C RoHS : Compliant |
| 0 | ||
| KC2016Z12.2880C15XXK | Kyocera AVX Components | Oscillator; 12.288MHz; SMD; 2x1.6x0.8mm; 15pF; ±30ppm; 3.3VDC |
| 0 | ||
| KC2016Z14.3182C15XXK | Kyocera AVX Components | Oscillator; 14.3182MHz; SMD; 2x1.6x0.8mm; 15pF; ±30ppm; 3.3VDC |
| 0 | ||
| KC2016Z4.00000C1KX00 | Kyocera AVX Components | Oscillator; 4MHz; SMD; 2x1.6x0.8mm; 15pF; ±20ppm; 3.3VDC; -40÷85°C |
| 0 | ||
| C2012C0G2W122J060AE | TDK Corporation | Capacitor: ceramic; MLCC; 1.2nF; 450V; C0G (NP0); ±5%; SMD; 0805 RoHS : Compliant |
| 0 | ||
 Ameya Holding Limited | RC2010JK-070RL | YAGEO Corporation | RoHS : Compliant | 40,000 | ||
| TSC2012IYST | STMicroelectronics | RoHS : Compliant | 8,065 | |||
| TSC2010IDT | STMicroelectronics | RoHS : Compliant | 7,952 | |||
| TSC2011IST | STMicroelectronics | RoHS : Compliant | 5,983 | |||
| TSC2010IYDT | STMicroelectronics | RoHS : Compliant | 5,418 | |||
| TSC2012IYDT | STMicroelectronics | RoHS : Compliant | 5,335 | |||
| TSC2011IYST | STMicroelectronics | RoHS : Compliant | 3,666 | |||
| CBC2012T1R0M | TAIYO YUDEN | RoHS : Compliant | 3,000 | |||
| BRC2016T101M | TAIYO YUDEN | RoHS : Compliant | 2,000 | |||
| BRC2016T330M | TAIYO YUDEN | RoHS : Compliant | 2,000 | |||
| BRC2016T101K | TAIYO YUDEN | RoHS : Compliant | 2,000 | |||
| BRC2016T220K | TAIYO YUDEN | RoHS : Compliant | 2,000 | |||
| CBC2016T4R7M | TAIYO YUDEN | RoHS : Compliant | 2,000 | |||
| BZX585-C20,115 | Nexperia | DIODE ZENER 20V 300MW SOD523 RoHS : Compliant | 515 | |||
TSC2017IYZGT | Texas Instruments | IC CTRLR TCH SCREEN I2C 12DSBGA RoHS : Compliant | 405 | |||
 ComSIT USA | C2012X5R1V226M125AC | TDK Corporation | AVAILABLE EU RoHS : Compliant | 36,629 | ||
| KC2016K135600C1GE00 | Kyocera AVX Components | AVAILABLE EU | 913 | |||
| C2012X7R1H105MSOFT | TDK Corporation | AVAILABLE EU | 232,500 | |||
| RC2012J561CS | AVAILABLE EU | 31,865 | ||||
| C2012C0G1H223JT0Y0N | TDK Corporation | AVAILABLE EU | 14,744 | |||
| KC2016K240000C1GE00 | Kyocera AVX Components | AVAILABLE EU | 1,301 | |||
| RPC2010JTR300 | SEI Stackpole Electronics Inc | AVAILABLE EU RoHS : Compliant | 6,799 | |||
| KC2016K32K7680C12A00 | Kyocera AVX Components | AVAILABLE EU | 1,184 | |||
| RC2010JK07510R | YAGEO Corporation | AVAILABLE EU | 825,891 | |||
| C2012X5R1A476M125AC | TDK Corporation | AVAILABLE EU RoHS : Compliant | 266,890 | |||
| RC2010JK0710KL | AVAILABLE EU | 27,000 | ||||
| RC2010JK074K7L | AVAILABLE EU | 16,482 | ||||
| RC2010FK0710ML | AVAILABLE EU | 46,377 | ||||
| RC2010JK104K7L | AVAILABLE EU | 4,965 | ||||
| UEFS4C3000C201 | Schurter Electronic Components | AVAILABLE EU | 410 | |||
ComSIT USA | RC2010JK07560RL | YAGEO Corporation | Fixed Resistor, Metal Glaze/thick Film, 0.75W, 560ohm, 200V, 5% +/-Tol, 100ppm/Cel, Surface Mount, 2010 RoHS : Compliant | 1,480,000 | ||
| RC2010FK071K3L | YAGEO Corporation | Fixed Resistor, Metal Glaze/thick Film, 0.75W, 1300ohm, 200V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 2010 RoHS : Compliant | 144,000 | |||
| C2012CR22J | SAGAMI ELEC CO LTD | General Purpose Inductor, 0.22uH, 5%, Wirewound-Core, 0907 RoHS : Compliant | 96,000 | |||
| RC2010FK07487RL | YAGEO Corporation | Fixed Resistor, Metal Glaze/thick Film, 0.75W, 487ohm, 200V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 2010 RoHS : Compliant | 40,000 | |||
| C2012X7R1E475KT0Y9E | Murata Manufacturing Co Ltd | Cer Cap RoHS : Compliant | 15,081 | |||
| C2012X7R1H334KT000N | Nihon Dempa Kogyo Co Ltd | Electronic Component RoHS : Compliant | 8,000 | |||
| C2012H39NH | SAGAMI ELEC CO LTD | General Purpose Inductor, 0.039uH, 3%, Wirewound-Core, 0907 RoHS : Compliant | 6,000 | |||
| RC2012F221CS | Samsung Electronics Co. Ltd | THICK FILM RESISTOR Fixed Resistor, Metal Glaze/thick Film, 0.125W, 220ohm, 150V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 0805 RoHS : Compliant | 5,000 | |||
| C2012X7R683KGT | Darfon Corporation | MLCC CERAMIC CAPACITOR Ceramic Capacitor, Multilayer, Ceramic, 50V, 10% +Tol, 10% -Tol, X7R, 15% TC, 0.068uF, Surface Mount, 0805 RoHS : Compliant | 4,000 | |||
| RC2010JK072K2L | YAGEO Corporation | Fixed Resistor, Metal Glaze/thick Film, 0.75W, 2200ohm, 200V, 5% +/-Tol, 100ppm/Cel, Surface Mount, 2010 RoHS : Compliant | 4,000 | |||
| C2012X5R475KFP | Darfon Corporation | MLCC CERAMIC CAPACITOR Ceramic Capacitor, Multilayer, Ceramic, 25V, 10% +Tol, 10% -Tol, X5R, 15% TC, 4.7uF, Surface Mount, 0805 RoHS : Compliant | 3,000 | |||
| MTC20158TBC7 | Alcatel-Lucent | Electronic Component RoHS : Not Compliant | 245 | |||
| CPC2014N | IXYS Corporation | Solid state relay, 60V, 1A, DIP package, IXYS RoHS : Compliant | 107 | |||
| TC2011SEKWAUA2 | Kingbright | 50 MM (2.0 INCH) 5 X 7 DOT MATRIX DISPLAY Smart/Normal 5 X 7 Dot Matrix LED Display, Super Bright Orange, 50.72mm RoHS : Compliant | 65 | |||
| RAC2015DK | RECOM Power GmbH | AC-DC Regulated Power Supply Module, 2 Output, 20W, Hybrid RoHS : Compliant | 15 | |||
 GLYN GmbH & Co. KG | NL10276BC20-18 | Tianma Micro-electronics Co | TFT 10.40", 1024x768, 400cd, LVDS | 1 | ||
 NexGen Digital | C2012X7R1C334KT0D9N | TDK Corporation | 70,000 | |||
| C2012X7R1C224KT0D9N | TDK Corporation | 30,000 | ||||
| C2012X5R0J106MT0Y9N | TDK Corporation | 20,000 | ||||
| C2012X7R1E224KT0Y9N | TDK Corporation | 10,000 | ||||
| RC2010JK-070RL | YAGEO Corporation | RoHS : Compliant | 4,568 | |||
| WSC-2010-R02-1R86 | Vishay Huntington | 3,150 | ||||
| C2012X7R2A104KT0L0U | TDK Corporation | 3,148 | ||||
| C2012X7R1V475M125AC | TDK Corporation | RoHS : Compliant | 2,039 | |||
| C2012X7R1E104K | TDK Corporation | RoHS : Compliant | 2,000 | |||
| C2012X7S2A105M125AB | TDK Corporation | RoHS : Compliant | 1,640 | |||
| C2012X7R1A475K085AC | TDK Corporation | RoHS : Compliant | 570 | |||
| CC2015FC-0.10-1% | Caddock Electronics Inc | RoHS : Compliant | 118 | |||
| C2012X7R1H104KT | TDK Corporation | RoHS : Compliant | 53 | |||
| C2012X7R2A223KT020U | TDK Corporation | 13 | ||||
| C2012Y5V0J106Z | TDK Corporation | 7 | ||||
 PEI Genesis | 85106AC2016SY50 | SOURIAU-SUNBANK | RoHS : Not Compliant |
| 22 | |
| 85106EC2016PX5044 | SOURIAU-SUNBANK | RoHS : Not Compliant |
| 0 | ||
| 85107EC2016PY54 | SOURIAU-SUNBANK |
| 0 | |||
| 85108RC2016PW54 | SOURIAU-SUNBANK |
| 0 | |||
| AIB6TC20-18SC | Amphenol Corporation |
| 0 | |||
| S982-C2010-1.50-12 | SOURIAU-SUNBANK |
| 0 | |||
| SE91FA06C2.0-1-34 | SOURIAU-SUNBANK |
| 0 | |||
| S1026-C2012-34 | SOURIAU-SUNBANK |
| 0 | |||
| S1026-C2016-12 | SOURIAU-SUNBANK |
| 0 | |||
| J1087-P158-C20-1F1 | SOURIAU-SUNBANK |
| 0 | |||
| J1087-S158-C20-1F | SOURIAU-SUNBANK |
| 0 | |||
| CB6FC20-15PC | ITT Interconnect Solutions |
| 0 | |||
| AIB1FC20-15PC | Amphenol Corporation |
| 0 | |||
| CT6LC20-15SS | ITT Interconnect Solutions |
| 0 | |||
| CB6TC20-19PWC | ITT Interconnect Solutions |
| 0 | |||
 Powell Electronics | HVC2010L3006LT | EXXELIA Group | HVC2010L3006LT |
| 4,000 | |
| PSC-2012 | Altech Corporation | Power Supply;DinRail,20W, CL2 RoHS : Compliant |
| 653 | ||
| PSC-2015 | Altech Corporation | Power Supply;DinRail,20W, CL2 RoHS : Compliant |
| 303 | ||
| CJ70C-201 | Trompeter | TRB Connector |
| 100 | ||
| PT07C-20-16P(023) | Amphenol Corporation | Connector RoHS : Compliant |
| 76 | ||
| MS3102C20-18P | Amphenol Corporation | CONNECTOR |
| 72 | ||
| 85106AC2016SY50 | SOURIAU-SUNBANK | 851 16C 16#16 SKT PLUG RoHS : Not Compliant |
| 15 | ||
| 85100EC2016SX50 | SOURIAU-SUNBANK | 851 16C 16#16 SKT RECP RoHS : Not Compliant |
| 15 | ||
| 85106EC2016S50 | SOURIAU-SUNBANK | 851 16C 16#16 SKT PLUG RoHS : Not Compliant |
| 15 | ||
| TXR18AB00C2010AI | TE Connectivity | Connectors RoHS : Not Compliant |
| 15 | ||
| 85106EC2016SX50 | SOURIAU-SUNBANK | 851 16C 16#16 SKT PLUG RoHS : Not Compliant |
| 15 | ||
| 85101EC2016SY50 | SOURIAU-SUNBANK | 851 16C 16#16 SKT RECP RoHS : Not Compliant |
| 6 | ||
| 85101AC2016SW50 | SOURIAU-SUNBANK | 851 16C 16#16 SKT RECP RoHS : Not Compliant |
| 6 | ||
| PT07C-20-16P | Amphenol Corporation | CONNECTOR RoHS : Not Compliant |
| 2 | ||
| G05C-20-16S | Amphenol Corporation | CONNECTOR |
| 1 | ||
 PUI | MC2010-333-JTW | RCD Components Inc | RoHS : Compliant | 4,000 | ||
 Richardson RFPD | REC20-1215D | RECOM Power GmbH | Module DC-DC 12VIN 2-OUT 15V/-15V 0.67A/-0.67A 20W RoHS : Compliant | 0 | ||
| RAC20-15SK | RECOM Power GmbH | AC/DC Power Supply Single-OUT 15V 1.333A 20W 4-Pin RoHS : Compliant |
| 0 | ||
| LANC2015DW3 | Wall Industries Inc | 3 Watts Single and Dual DC to DC Converters RoHS : Compliant | 0 | |||
| RAC20-12SK/277 | RECOM Power GmbH | AC/DC Power Supply Single-OUT 12V 1.67A 20W 4-Pin RoHS : Compliant |
| 0 | ||
RAC20-12SN | RECOM Power GmbH | AC/DC Power Supply Single-OUT 12V 1.66A 20W 4-Pin RoHS : Compliant |
| 0 | ||
| DC2019B | Analog Devices Inc | LT8614 DC to DC Converter and Switching Regulator RoHS : Compliant |
| 0 | ||
| DC2014A | Analog Devices Inc | LT8302 DC to DC Controller 4.75VDC to 5.25VDC Outp RoHS : Compliant |
| 0 | ||
| REC20-125.1S | RECOM Power GmbH | Module DC-DC 12VIN 1-OUT 5.1V 4A 20W 6-Pin Tube RoHS : Compliant | 0 | |||
| DC2018A | Analog Devices Inc | LT8330 DC to DC Converter and Switching Regulator RoHS : Compliant |
| 0 | ||
| 100C201JWNXJ8 | Kyocera AVX Components | MULTILYRCERAMIC CAP | 0 | |||
| RAC20-12SB-ST | RECOM Power GmbH | AC/DC Power Supply Single-OUT 12V 1.666A 20W 8-Pin RoHS : Compliant |
| 0 | ||
| RAC20-15DK/277 | RECOM Power GmbH | AC/DC Power Supply Dual-OUT -15V/15V -0.67A/0.67A RoHS : Compliant |
| 0 | ||
| REC20-1215S | RECOM Power GmbH | Module DC-DC 12VIN 1-OUT 15V 1.34A 20W 6-Pin Tube RoHS : Compliant | 0 | |||
| RAC20-15SK/277 | RECOM Power GmbH | AC/DC Power Supply Single-OUT 15V 1.333A 20W 4-Pin RoHS : Compliant |
| 0 | ||
| RAC20-12SB | RECOM Power GmbH | AC/DC Power Supply Single-OUT 12V 1.666A 20W 4-Pin RoHS : Compliant |
| 0 | ||
 Rutronik | RC2010FK-071KL | YAGEO Corporation | RC2010 1K 1% 0,75W TK100 RoHS : Compliant |
| 236,000 | |
| RC2010FK-07560RL | YAGEO Corporation | RC2010 560R 1% 0,75W TK100 RoHS : Compliant |
| 168,000 | ||
| RC2010FK-071RL | YAGEO Corporation | RC2010 1R 1% 0,75W TK200 RoHS : Compliant |
| 60,000 | ||
| RC2010JK-07240RL | YAGEO Corporation | RC2010 240R 5% 0,75W TK100 RoHS : Compliant |
| 28,000 | ||
| RC2010JK-07150RL | YAGEO Corporation | RC2010 150R 5% 0,75W TK100 RoHS : Compliant |
| 20,000 | ||
| RC2010FK-072R7L | YAGEO Corporation | RC2010 2,7R 1% 0,75W TK200 RoHS : Compliant |
| 16,000 | ||
| RC2010FK-07680RL | YAGEO Corporation | RC2010 680R 1% 0,75W TK100 RoHS : Compliant |
| 12,000 | ||
| RC2010FK-0762RL | YAGEO Corporation | RC2010 62R 1% 0,75W TK100 RoHS : Compliant |
| 8,000 | ||
| AC2010FK-0712KL | YAGEO Corporation | AC2010 12K 1% 0,75W AUTOMO RoHS : Compliant |
| 8,000 | ||
| RC2010FK-07560KL | YAGEO Corporation | RC2010 560K 1% 0,75W TK100 RoHS : Compliant |
| 8,000 | ||
| RC2010JK-0733RL | YAGEO Corporation | RC2010 33R 5% 0,75W TK100 RoHS : Compliant |
| 8,000 | ||
| AC2010JK-077K5L | YAGEO Corporation | AC2010 7,5K 5% 0,75W AUTOMO RoHS : Compliant |
| 8,000 | ||
| AC2010JK-0751KL | YAGEO Corporation | AC2010 51K 5% 0,75W AUTOMO RoHS : Compliant |
| 4,000 | ||
| RC2010FK-07100KL | YAGEO Corporation | RC2010 100K 1% 0,75W TK100 RoHS : Compliant |
| 4,000 | ||
| AC2010FK-0715RL | YAGEO Corporation | AC2010 15R 1% 0,75W AUTOMO RoHS : Compliant |
| 4,000 | ||
 Chip 1 Exchange | C2012X7R1H471KT000A | TDK Corporation | INSTOCK | 120,000 | ||
| RC2012F183CS | INSTOCK | 115,000 | ||||
| RC2010FK-0717R8 | INSTOCK | 20,000 | ||||
| RC2012F3321CS | Samsung Electro-Mechanics | INSTOCK RoHS : Compliant | 5,000 | |||
| RC2012J390CS | INSTOCK | 5,000 | ||||
| RC2012J155CS | INSTOCK | 4,900 | ||||
| RC2012J101CS | INSTOCK | 4,900 | ||||
| RC2010JK-07-680R | INSTOCK | 4,000 | ||||
| C2012C0G1H820JT000A | INSTOCK | 4,000 | ||||
| C2012C0G1H820JT000A | TDK Corporation | INSTOCK | 4,000 | |||
| RC2012F3321CS | Samsung Electro-Mechanics | INSTOCK RoHS : Compliant | 3,630 | |||
| RC2010 JK-07 130R | YAGEO Corporation | INSTOCK | 2,985 | |||
CL05C201JB5NNNC | Samsung Electro-Mechanics | INSTOCK RoHS : Compliant | 1,213 | |||
| C2012X6S1A226M125AC | INSTOCK | 318 | ||||
| RC2010FK-07100KL | YAGEO Corporation | INSTOCK RoHS : Compliant | 204 | |||
 Avnet Asia | BZT52H-C20,115 | Nexperia | Diode Zener Single 20V 6% 830mW 2-Pin SOD-123F T/R (Alt: BZT52H-C20,115) RoHS : Compliant |
| 48,000 | |
| MC2016Z40.0000C19XSH | KYOCERA Corporation | KEDMC2016Z40.0000C19XSH OSC 2016 40MHZ (Alt: MC2016Z40.0000C19XSH) RoHS : Compliant |
| 10,000 | ||
| KC2016Z125.000C19X00 | KYOCERA Corporation | KEDKC2016Z125.000C19X00 OSC 2016 125MHZ (Alt: KC2016Z125.000C19X00) RoHS : Compliant | 2,000 | |||
| RYC2010CT-1000JN-2T-TR | Vishay Intertechnologies | (Alt: RYC2010CT-1000JN-2T-TR) RoHS : Compliant | 0 | |||
| KC2016Z12.2880C15XXK | KYOCERA Corporation | KEDKC2016Z12.2880C15XXK OSC 2016 12.888M (Alt: KC2016Z12.2880C15XXK) RoHS : Compliant | 0 | |||
| FC2016GF13FM-B253025352839E-2T | Everlight Electronics Co Ltd | (Alt: FC2016GF13FM-B253025352839E-2T) RoHS : Compliant | 0 | |||
| C2012X5R1V106KT0J0E | TDK Corporation | (Alt: C2012X5R1V106KT0J0E) RoHS : Compliant | 0 | |||
| C2012X5R1V226M125AC | TDK Corporation | SMD Multilayer Ceramic Capacitor, 22 uF, 35 V, 0805 [2012 Metric], ? 20%, X5R, C Series, 2 mm (Alt: C2012X5R1V226M125AC) RoHS : Compliant | 0 | |||
| C2012X7R1H105KT000N | TDK Corporation | Multilayer Ceramic Capacitor, 1 uF, 50 V, ? 10%, X7R, 0805 [2012 Metric] (Alt: C2012X7R1H105KT000N) RoHS : Compliant | 0 | |||
| C2012X7R1A106K125AC | TDK Corporation | (Alt: C2012X7R1A106K125AC) RoHS : Compliant | 0 | |||
| MC2016Z25.0000C1ZDST | KYOCERA Corporation | (Alt: MC2016Z25.0000C1ZDST) RoHS : Compliant | 0 | |||
| MC2016F100.000H36KSH | KYOCERA Corporation | KEDMC2016F100.000H36KSH OSC 2016 100MHZ (Alt: MC2016F100.000H36KSH) RoHS : Compliant | 0 | |||
| KC2016K13.5600C1GE00 | KYOCERA Corporation | (Alt: KC2016K13.5600C1GE00) RoHS : Compliant | 0 | |||
| KC2016K2.04800C1GE00 | KYOCERA Corporation | (Alt: KC2016K2.04800C1GE00) RoHS : Compliant | 0 | |||
| KC2016Z25.0000C15XXK | KYOCERA Corporation | KEDKC2016Z25.0000C15XXK OSC 2016 25MHZ (Alt: KC2016Z25.0000C15XXK) RoHS : Compliant | 0 | |||
 Avnet Silica | BZV55-C20,115 | Nexperia | Diode Zener Single 20V 5 500mW 2Pin MiniMELF TR (Alt: BZV55-C20,115) RoHS : Compliant | 197,500 | ||
| TSC2011IYST | STMicroelectronics | (Alt: TSC2011IYST) RoHS : Compliant | 8,000 | |||
| TSC2012IYST | STMicroelectronics | (Alt: TSC2012IYST) RoHS : Compliant | 8,000 | |||
| TSC2010IYDT | STMicroelectronics | (Alt: TSC2010IYDT) RoHS : Compliant | 7,500 | |||
TC2014-5.0VCTTR | Microchip Technology Inc | (Alt: TC2014-5.0VCTTR) RoHS : Compliant | 6,000 | |||
| TSC2010IDT | STMicroelectronics | (Alt: TSC2010IDT) RoHS : Compliant | 5,000 | |||
| TSC2012IYDT | STMicroelectronics | Current Sense Amp Single 27V to 55V 8Pin SOIC TR (Alt: TSC2012IYDT) RoHS : Compliant | 5,000 | |||
| TSC2012HYDT | STMicroelectronics | Current Sense Amp Single 27V to 55V 8Pin SOIC TR (Alt: TSC2012HYDT) RoHS : Compliant | 5,000 | |||
| TSC2011HYDT | STMicroelectronics | Current Sense Amp Single 27V to 55V 8Pin SOIC TR (Alt: TSC2011HYDT) RoHS : Compliant | 5,000 | |||
| TSC2011IYDT | STMicroelectronics | (Alt: TSC2011IYDT) RoHS : Compliant | 5,000 | |||
| TSC201IST | STMicroelectronics | HE AMPLIFIERS (Alt: TSC201IST) RoHS : Compliant | 4,000 | |||
| TSC201IYST | STMicroelectronics | HE AMPLIFIERS (Alt: TSC201IYST) RoHS : Compliant | 4,000 | |||
| BZT52H-C20,115 | Nexperia | Diode Zener Single 20V 6 830mW 2Pin SOD123F TR (Alt: BZT52H-C20,115) RoHS : Compliant | 3,000 | |||
| TSC201IDT | STMicroelectronics | HE AMPLIFIERS (Alt: TSC201IDT) RoHS : Compliant | 2,500 | |||
| TSC201IYDT | STMicroelectronics | HE AMPLIFIERS (Alt: TSC201IYDT) RoHS : Compliant | 2,500 | |||
 Braemac Americas-Symmetry | NTC-201-01-01 | Lantronix Inc | NTC-201 4G LTE Cat 1bis Industrial IoT Router |
| 1 | |
AOC2012VAJC-10.0000T1 | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AOC2012VAJC-25.0000C | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AOC2012XAJC-27.0000C | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AOTA-C201612Q3R3MT | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AOC2012XAJC-19.4400C | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AOC2012VAJC-19.4400C | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AOC2012XAJC-10.0000C | Abracon Corporation | XTAL OSC OCXO 10.0000MHz CMOS RoHS : Compliant |
| 0 | ||
| AOC2012VAJC-12.8000C | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AOC2012XAJC-25.0000C | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AOC2012XAJC-12.8000C | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AOC2012VAJC-10.0000C | Abracon Corporation | RoHS : Compliant |
| 0 | ||
 Chip-Germany GmbH | CC2015FC | Caddock Electronics Inc | 140 | |||
| C2012Y5V1H474Z | TDK Corporation | RoHS : Compliant | 3 | |||
 Component Electronics, Inc | RC2012F183CS | Samsung Electronics Co. Ltd | IN STOCK SHIP TODAY |
| 140,000 | |
| RC2012F1000AS | Samsung Electronics Co. Ltd | IN STOCK SHIP TODAY |
| 60,000 | ||
| C2012X6S1A106MT0J0E | TDK Corporation | IN STOCK SHIP TODAY |
| 56,100 | ||
| RC2012F4750CS | Samsung Electronics Co. Ltd | IN STOCK SHIP TODAY |
| 30,000 | ||
| RC2012J271AS | Samsung Electronics Co. Ltd | IN STOCK SHIP TODAY |
| 20,000 | ||
| RC2012F3240CS | Samsung Electronics Co. Ltd | IN STOCK SHIP TODAY |
| 16,000 | ||
| RC2012F5112CS | Samsung Electronics Co. Ltd | IN STOCK SHIP TODAY |
| 15,000 | ||
| RC2012F1131CS | Samsung Electronics Co. Ltd | IN STOCK SHIP TODAY |
| 10,000 | ||
| RC2012J245CS | Samsung Electronics Co. Ltd | IN STOCK SHIP TODAY |
| 10,000 | ||
| C2012C0G1H470JT0J0A | TDK Corporation | IN STOCK SHIP TODAY |
| 9,550 | ||
| RC2012F2701CS | Samsung Electronics Co. Ltd | IN STOCK SHIP TODAY |
| 5,000 | ||
| RC2012J102AS | Samsung Electronics Co. Ltd | IN STOCK SHIP TODAY |
| 2,500 | ||
| C2012X6S1C106K125AC | TDK Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 2,200 | ||
| C2012Y5V0J226ZT000N | TDK Corporation | IN STOCK SHIP TODAY |
| 282 | ||
| C2012X7R1H225M | TDK Corporation | IN STOCK SHIP TODAY |
| 169 | ||
 DB Roberts | BPE-SC-2-01 | Essentra Components | Hole PlugFor SC ConnectorBlack RoHS : Compliant |
| 255 | |
| C201-14P | Accuride International | Narrow side space requirement |
| 4 | ||
| HMCC-2-01 | Essentra Components | 0 | ||||
| C2016-P | Heyco | LTBP 750-063 BLACK 10PK | 0 | |||
| C2012-P | Heyco | LTBP 625-063 BLACK 10PK | 0 | |||
| HURC-2-01 | Essentra Components | CLAMP,HALF U,ARROW MNT,NATURAL | 0 | |||
| DHURC-2-01 | Essentra Components | ClampHalf UArrow MntNat1/8 in Clamp Half U Arrow Mnt Nat | 0 | |||
| RRC-20-10-10-M | Essentra Components | 0 | ||||
| C2016 | Heyco | LTBP 750-063 BLACK RoHS : Compliant | 0 | |||
| WSLC-2-01 | Essentra Components | WIRE SADDLE, LOCKING TOP, 1KBA | 0 | |||
| C2012 | Heyco | LTBP 625-063 BLACK RoHS : Compliant | 0 | |||
| SC-20-1000 | Southco | 0 | ||||
| RRC-20-13-30-M | Essentra Components | 0 | ||||
| WAC2-01 | Essentra Components | Webbed Adj ClipNat3-8.5MM Cbl Webbed Adj Clip Nat | 0 | |||
 EBV Elektronik | TSC2010IST | STMicroelectronics | (Alt: TSC2010IST) RoHS : Compliant | 4,000 | ||
| TSC2010IDT | STMicroelectronics | (Alt: TSC2010IDT) RoHS : Compliant | 0 | |||
| TSC2011IYST | STMicroelectronics | (Alt: TSC2011IYST) RoHS : Compliant | 0 | |||
| TSC2012IYST | STMicroelectronics | (Alt: TSC2012IYST) RoHS : Compliant | 0 | |||
| TSC2012IYDT | STMicroelectronics | Current Sense Amp Single 27V to 55V 8Pin SOIC TR (Alt: TSC2012IYDT) RoHS : Compliant | 0 | |||
| TSC2012HYDT | STMicroelectronics | Current Sense Amp Single 27V to 55V 8Pin SOIC TR (Alt: TSC2012HYDT) RoHS : Compliant | 0 | |||
NSS1C201LT1G | onsemi | 100 V 20 A NPN Low VCEsat Bipolar Transistor ONSSPCTRNSTRN4B6U (Alt: NSS1C201LT1G) RoHS : Compliant | 0 | |||
| MIC2019YM6-TR | Microchip Technology Inc | (Alt: MIC2019YM6-TR) RoHS : Compliant | 0 | |||
| CY8C20110-SX2I | Infineon Technologies AG | (Alt: SP005645933) RoHS : Compliant | 0 | |||
| CY8C20110-SX2IT | Infineon Technologies AG | (Alt: SP005645935) RoHS : Compliant | 0 | |||
| TC2014-1.8VCTTR | Microchip Technology Inc | (Alt: TC2014-1.8VCTTR) RoHS : Compliant | 0 | |||
| TC2015-2.8VCTTR | Microchip Technology Inc | (Alt: TC2015-2.8VCTTR) RoHS : Compliant | 0 | |||
| TC2015-3.0VCTTR | Microchip Technology Inc | (Alt: TC2015-3.0VCTTR) RoHS : Compliant | 0 | |||
| CY8C20110-LDX2I | Infineon Technologies AG | (Alt: SP005645929) RoHS : Compliant | 0 | |||
DSPIC33FJ12MC201-I/SS | Microchip Technology Inc | MCU 16bit dSPIC33 dsPIC RISC 12KB Flash 33V 20Pin SSOP Tube (Alt: DSPIC33FJ12MC201-I/SS) RoHS : Compliant | 0 | |||
 FDH Electronics | PL75C-201 | Cinch Connectivity Solutions | RF / Coaxial RoHS : Compliant |
| 1,454 | |
| RSC 20 10 10 | FDH Electronics | Wire Placehldr | 830 | |||
| PLR155AC-201 | Cinch Connectivity Solutions | RF / Coaxial RoHS : Compliant |
| 621 | ||
| BJ74C-201 | Cinch Connectivity Solutions | RF / Coaxial |
| 166 | ||
| PLR375C-201 | Cinch Connectivity Solutions | RF / Coaxial RoHS : Compliant |
| 147 | ||
| C2019-50 | Honeywell Sensing and Control | Switches | 146 | |||
| CC-2016-360 | ELECTRO ENTERPRISES INC | Cable Assembly | 93 | |||
| CC-2017-96 | ELECTRO ENTERPRISES INC | Data Bus | 63 | |||
| CC-2012-7M | ELECTRO ENTERPRISES INC | Cable Assembly |
| 25 | ||
| CJ70C-201 | Cinch Connectivity Solutions | RF / Coaxial RoHS : Compliant |
| 16 | ||
| PL155AC-201-1U | Cinch Connectivity Solutions | RF / Coaxial |
| 14 | ||
| BJ79C-201-1U | Cinch Connectivity Solutions | RF / Coaxial |
| 10 | ||
| TAPLR74C-201-144 | ELECTRO ENTERPRISES INC | Data Bus | 5 | |||
| TAPL74C-201-6 | ELECTRO ENTERPRISES INC | Cable Assembly |
| 5 | ||
| 319AS001C2010-6 | Glenair Inc | Connector RoHS : Compliant | 0 | |||
 Pasternack Enterprises US | PE3C2013 | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR401FLJ Low PIM, RF Cable Type: PE-SR401FLJ Low PIM, RF Cable Impedance: 50 Ohm. 7/16 DIN Male to 7/16 DIN Male LSZH Jacketed Low PIM Cable Using SR401FLJ Low PIM Coax with HeatShrink, RoHS., Radio frequency assembly 7/16 DIN male to 7/16 DIN male LSZH jacketed low PIM cable using SR401FLJ low PIM coax with heatshrink, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 7/16 DIN male to 7/16 DIN male LSZH jacketed low PIM cable using SR401FLJ low PIM coax with heatshrink, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 7/16 DIN cable connection on one end and 7/16 DIN cable connection on the other. Our low PIM 7/16 DIN to 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. This 7/16 DIN to 7/16 DIN cable is a male to male coax assembly, PE3C2013, can also be known as a low PIM 7/16 DIN plug to 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to 7/16 DIN plug cable assembly PE3C2013 is built with PE-SR401FLJ low PIM which is a formable coax type. The Pasternack low passive intermodulation formable 7/16 DIN cable assembly is manufactured with 7/16 DIN to 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency low PIM 7/16 DIN male to 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low PIM 7/16 DIN plug to 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 7/16 DIN male to 7/16 DIN male LSZH jacketed low PIM cable using SR401FLJ low PIM coax with heatshrink, RoHS. | 25 | ||
| PE3C2012 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR401FLJ Low PIM, RF Cable Type: PE-SR401FLJ Low PIM, RF Cable Impedance: 50 Ohm. N Male to 7/16 DIN Male LSZH Jacketed Low PIM Cable Using SR401FLJ Low PIM Coax with HeatShrink, RoHS., Radio frequency assembly N male to 7/16 DIN male LSZH jacketed low PIM cable using SR401FLJ low PIM coax with heatshrink, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to 7/16 DIN male LSZH jacketed low PIM cable using SR401FLJ low PIM coax with heatshrink, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with type N cable connection on one end and 7/16 DIN cable connection on the other. Our low PIM N type to 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. This type N to 7/16 DIN cable is a male to male coax assembly, PE3C2012, can also be known as a low PIM N type plug to 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. Type N plug to 7/16 DIN plug cable assembly PE3C2012 is built with PE-SR401FLJ low PIM which is a formable coax type. The Pasternack low passive intermodulation formable N cable assembly is manufactured with N type to 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency low PIM type N male to 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2012 can also be used in the other direction and will be 7/16 DIN male to type N male cable assembly if the opposite connectivity is required. Low PIM N type plug to 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to 7/16 DIN cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to 7/16 DIN male LSZH jacketed low PIM cable using SR401FLJ low PIM coax with heatshrink, RoHS. | 22 | |||
| PE3C2011 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR401FLJ Low PIM, RF Cable Type: PE-SR401FLJ Low PIM, RF Cable Impedance: 50 Ohm. N Male to N Male LSZH Jacketed Low PIM Cable Using SR401FLJ Low PIM Coax with HeatShrink, RoHS., Radio frequency assembly N male to N male LSZH jacketed low PIM cable using SR401FLJ low PIM coax with heatshrink, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to N male LSZH jacketed low PIM cable using SR401FLJ low PIM coax with heatshrink, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with type N cable connection on one end and type N cable connection on the other. Our low PIM N type to type N cable assemblies have a male gender on end 1 and male on end 2. This type N to N type cable is a male to male coax assembly, PE3C2011, can also be known as a low PIM type N plug to type N plug cable assembly and will be shipped same-day as it is purchased. Type N plug to N type plug cable assembly PE3C2011 is built with PE-SR401FLJ low PIM which is a formable coax type. The Pasternack low passive intermodulation formable N cable assembly is manufactured with type N to N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency low PIM type N male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low PIM type N plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male LSZH jacketed low PIM cable using SR401FLJ low PIM coax with heatshrink, RoHS. | 21 | |||
| PE3C2013-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR401FLJ Low PIM, RF Cable Type: PE-SR401FLJ Low PIM, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. 7/16 DIN Male to 7/16 DIN Male LSZH Jacketed Low PIM Cable 100 cm Length Using SR401FLJ Low PIM Coax with HeatShrink, RoHS., Radio frequency assembly 7/16 DIN male to 7/16 DIN male LSZH jacketed low PIM cable 100 cm length using SR401FLJ low PIM coax with heatshrink, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 7/16 DIN male to 7/16 DIN male LSZH jacketed low PIM cable 100 cm length using SR401FLJ low PIM coax with heatshrink, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 7/16 DIN cable connection on one end and 7/16 DIN cable connection on the other. Our low PIM 7/16 DIN to 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. This 7/16 DIN to 7/16 DIN cable is a male to male coax assembly, PE3C2013-100CM, can also be known as a low PIM 7/16 DIN plug to 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to 7/16 DIN plug cable assembly PE3C2013-100CM is built with PE-SR401FLJ low PIM which is a formable coax type. The Pasternack low passive intermodulation formable 7/16 DIN cable assembly is manufactured with 7/16 DIN to 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency low PIM 7/16 DIN male to 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low PIM 7/16 DIN plug to 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 7/16 DIN male to 7/16 DIN male LSZH jacketed low PIM cable 100 cm length using SR401FLJ low PIM coax with heatshrink, RoHS. |
| 19 | ||
| PE3C2014-200CM | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR401FLJ Low PIM, RF Cable Type: PE-SR401FLJ Low PIM, RF Cable Impedance: 50 Ohm, Length: 78.74 inches. N Male to 7/16 DIN Female LSZH Jacketed Low PIM Cable 200 cm Length Using SR401FLJ Low PIM Coax with HeatShrink, RoHS., Radio frequency assembly N male to 7/16 DIN female LSZH jacketed low PIM cable 200 cm length using SR401FLJ low PIM coax with heatshrink, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to 7/16 DIN female LSZH jacketed low PIM cable 200 cm length using SR401FLJ low PIM coax with heatshrink, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with type N cable connection on one end and 7/16 DIN cable connection on the other. Our low PIM N type to 7/16 DIN cable assemblies have a male gender on end 1 and female on end 2. This type N to 7/16 DIN cable is a male to female coax assembly, PE3C2014-200CM, can also be known as a low PIM N type plug to 7/16 DIN jack cable assembly and will be shipped same-day as it is purchased. Type N plug to 7/16 DIN jack cable assembly PE3C2014-200CM is built with PE-SR401FLJ low PIM which is a formable coax type. The Pasternack low passive intermodulation formable N cable assembly is manufactured with type N to 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency low PIM N type male to 7/16 DIN female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2014-200CM can also be used in the other direction and will be 7/16 DIN female to type N male cable assembly if the opposite connectivity is required. Low PIM type N plug to 7/16 DIN jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to 7/16 DIN cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to 7/16 DIN female LSZH jacketed low PIM cable 200 cm length using SR401FLJ low PIM coax with heatshrink, RoHS. |
| 15 | ||
| PE3C2011-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR401FLJ Low PIM, RF Cable Type: PE-SR401FLJ Low PIM, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. N Male to N Male LSZH Jacketed Low PIM Cable 100 cm Length Using SR401FLJ Low PIM Coax with HeatShrink, RoHS., Radio frequency assembly N male to N male LSZH jacketed low PIM cable 100 cm length using SR401FLJ low PIM coax with heatshrink, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to N male LSZH jacketed low PIM cable 100 cm length using SR401FLJ low PIM coax with heatshrink, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with type N cable connection on one end and N type cable connection on the other. Our low PIM type N to type N cable assemblies have a male gender on end 1 and male on end 2. This N type to type N cable is a male to male coax assembly, PE3C2011-100CM, can also be known as a low PIM type N plug to type N plug cable assembly and will be shipped same-day as it is purchased. Type N plug to N type plug cable assembly PE3C2011-100CM is built with PE-SR401FLJ low PIM which is a formable coax type. The Pasternack low passive intermodulation formable N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency low PIM N type male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low PIM type N plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male LSZH jacketed low PIM cable 100 cm length using SR401FLJ low PIM coax with heatshrink, RoHS. |
| 11 | ||
| PE3C2012-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR401FLJ Low PIM, RF Cable Type: PE-SR401FLJ Low PIM, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. N Male to 7/16 DIN Male LSZH Jacketed Low PIM Cable 100 cm Length Using SR401FLJ Low PIM Coax with HeatShrink, RoHS., Radio frequency assembly N male to 7/16 DIN male LSZH jacketed low PIM cable 100 cm length using SR401FLJ low PIM coax with heatshrink, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to 7/16 DIN male LSZH jacketed low PIM cable 100 cm length using SR401FLJ low PIM coax with heatshrink, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with type N cable connection on one end and 7/16 DIN cable connection on the other. Our low PIM type N to 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. This type N to 7/16 DIN cable is a male to male coax assembly, PE3C2012-100CM, can also be known as a low PIM N type plug to 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. Type N plug to 7/16 DIN plug cable assembly PE3C2012-100CM is built with PE-SR401FLJ low PIM which is a formable coax type. The Pasternack low passive intermodulation formable N cable assembly is manufactured with N type to 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency low PIM type N male to 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2012-100CM can also be used in the other direction and will be 7/16 DIN male to type N male cable assembly if the opposite connectivity is required. Low PIM N type plug to 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to 7/16 DIN cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to 7/16 DIN male LSZH jacketed low PIM cable 100 cm length using SR401FLJ low PIM coax with heatshrink, RoHS. |
| 10 | ||
| PE3C2011-200CM | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR401FLJ Low PIM, RF Cable Type: PE-SR401FLJ Low PIM, RF Cable Impedance: 50 Ohm, Length: 78.74 inches. N Male to N Male LSZH Jacketed Low PIM Cable 200 cm Length Using SR401FLJ Low PIM Coax with HeatShrink, RoHS., Radio frequency assembly N male to N male LSZH jacketed low PIM cable 200 cm length using SR401FLJ low PIM coax with heatshrink, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to N male LSZH jacketed low PIM cable 200 cm length using SR401FLJ low PIM coax with heatshrink, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with N type cable connection on one end and type N cable connection on the other. Our low PIM type N to N type cable assemblies have a male gender on end 1 and male on end 2. This N type to type N cable is a male to male coax assembly, PE3C2011-200CM, can also be known as a low PIM type N plug to type N plug cable assembly and will be shipped same-day as it is purchased. Type N plug to N type plug cable assembly PE3C2011-200CM is built with PE-SR401FLJ low PIM which is a formable coax type. The Pasternack low passive intermodulation formable N cable assembly is manufactured with type N to N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency low PIM type N male to N type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low PIM type N plug to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male LSZH jacketed low PIM cable 200 cm length using SR401FLJ low PIM coax with heatshrink, RoHS. |
| 10 | ||
| PE3C2013-200CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR401FLJ Low PIM, RF Cable Type: PE-SR401FLJ Low PIM, RF Cable Impedance: 50 Ohm, Length: 78.74 inches. 7/16 DIN Male to 7/16 DIN Male LSZH Jacketed Low PIM Cable 200 cm Length Using SR401FLJ Low PIM Coax with HeatShrink, RoHS., Radio frequency assembly 7/16 DIN male to 7/16 DIN male LSZH jacketed low PIM cable 200 cm length using SR401FLJ low PIM coax with heatshrink, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 7/16 DIN male to 7/16 DIN male LSZH jacketed low PIM cable 200 cm length using SR401FLJ low PIM coax with heatshrink, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 7/16 DIN cable connection on one end and 7/16 DIN cable connection on the other. Our low PIM 7/16 DIN to 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. This 7/16 DIN to 7/16 DIN cable is a male to male coax assembly, PE3C2013-200CM, can also be known as a low PIM 7/16 DIN plug to 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to 7/16 DIN plug cable assembly PE3C2013-200CM is built with PE-SR401FLJ low PIM which is a formable coax type. The Pasternack low passive intermodulation formable 7/16 DIN cable assembly is manufactured with 7/16 DIN to 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency low PIM 7/16 DIN male to 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low PIM 7/16 DIN plug to 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 7/16 DIN male to 7/16 DIN male LSZH jacketed low PIM cable 200 cm length using SR401FLJ low PIM coax with heatshrink, RoHS. |
| 6 | ||
| PE3C2019-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 72 inches. 1.0/2.3 Plug to BNC Male Cable 72 Inch Length Using RG316 Coax., Radio frequency assembly 1.0/2.3 plug to BNC male cable 72 inch length using RG316 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.0/2.3 plug to BNC male cable 72 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to BNC cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with 1.0/2.3 cable connection on one end and BNC cable connection on the other. Our 1.0/2.3 to BNC cable assembly has plug gender on end 1 and male on end 2. PE3C2019-72 can also be known as a 1.0/2.3 male to BNC plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. 1.0/2.3 male to BNC plug cable assembly PE3C2019-72 is built with RG316 which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to BNC cable connectors, has a 50 Ohm impedance and is single shielded. One connector features the crimp/solder attachment method and a brass body with nickel plating, while the other has crimp/crimp attachment method and brass body with nickel plating.Additional dimensions, specifications and CAD drawings for this PE3C2019-72 RF cable are available on our downloadable PDF datasheet.PE3C2019-72 can also be used in the other direction and will be BNC male to 1.0/2.3 plug cable assembly if the opposite connectivity is required. 1.0/2.3 male to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to BNC cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.0/2.3 RF cable assembly as per your requirements. |
| 0 | ||
| PE3C2015 | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR401FLJ Low PIM, RF Cable Type: PE-SR401FLJ Low PIM, RF Cable Impedance: 50 Ohm. 7/16 DIN Male to 7/16 DIN Female LSZH Jacketed Low PIM Cable Using SR401FLJ Low PIM Coax with HeatShrink, RoHS., Radio frequency assembly 7/16 DIN male to 7/16 DIN female LSZH jacketed low PIM cable using SR401FLJ low PIM coax with heatshrink, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 7/16 DIN male to 7/16 DIN female LSZH jacketed low PIM cable using SR401FLJ low PIM coax with heatshrink, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 7/16 DIN cable connection on one end and 7/16 DIN cable connection on the other. Our low PIM 7/16 DIN to 7/16 DIN cable assemblies have a male gender on end 1 and female on end 2. This 7/16 DIN to 7/16 DIN cable is a male to female coax assembly, PE3C2015, can also be known as a low PIM 7/16 DIN plug to 7/16 DIN jack cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to 7/16 DIN jack cable assembly PE3C2015 is built with PE-SR401FLJ low PIM which is a formable coax type. The Pasternack low passive intermodulation formable 7/16 DIN cable assembly is manufactured with 7/16 DIN to 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency low PIM 7/16 DIN male to 7/16 DIN female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2015 can also be used in the other direction and will be 7/16 DIN female to 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN plug to 7/16 DIN jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 7/16 DIN male to 7/16 DIN female LSZH jacketed low PIM cable using SR401FLJ low PIM coax with heatshrink, RoHS. | 0 | |||
| PE3C2010 | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.1/9.5 Mini DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.1/9.5 Mini DIN, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FLJ Low PIM, RF Cable Type: PE-SR402FLJ Low PIM, RF Cable Impedance: 50 Ohm. 4.1/9.5 Mini DIN Male to 4.1/9.5 Mini DIN Female LSZH Jacketed Low PIM Cable Using SR402FLJ Low PIM Coax with HeatShrink, RoHS., Radio frequency assembly 4.1/9.5 mini DIN male to 4.1/9.5 mini DIN female LSZH jacketed low PIM cable using SR402FLJ low PIM coax with heatshrink, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 4.1/9.5 mini DIN male to 4.1/9.5 mini DIN female LSZH jacketed low PIM cable using SR402FLJ low PIM coax with heatshrink, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.1/9.5 Mini DIN to 4.1/9.5 Mini DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.1/9.5 Mini DIN cable connection on one end and 4.1/9.5 Mini DIN cable connection on the other. Our low PIM 4.1/9.5 Mini DIN to 4.1/9.5 Mini DIN cable assemblies have a male gender on end 1 and female on end 2. This 4.1/9.5 Mini DIN to 4.1/9.5 Mini DIN cable is a male to female coax assembly, PE3C2010, can also be known as a low PIM 4.1/9.5 Mini DIN plug to 4.1/9.5 Mini DIN jack cable assembly and will be shipped same-day as it is purchased. 4.1/9.5 Mini DIN plug to 4.1/9.5 Mini DIN jack cable assembly PE3C2010 is built with PE-SR402FLJ low PIM which is a formable coax type. The Pasternack low passive intermodulation formable 4.1/9.5 Mini DIN cable assembly is manufactured with 4.1/9.5 Mini DIN to 4.1/9.5 Mini DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency low PIM 4.1/9.5 Mini DIN male to 4.1/9.5 Mini DIN female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2010 can also be used in the other direction and will be 4.1/9.5 Mini DIN female to 4.1/9.5 Mini DIN male cable assembly if the opposite connectivity is required. Low PIM 4.1/9.5 Mini DIN plug to 4.1/9.5 Mini DIN jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.1/9.5 Mini DIN to 4.1/9.5 Mini DIN cable assembly for quick shipment worldwide. Variations of 4.1/9.5 Mini DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 4.1/9.5 mini DIN male to 4.1/9.5 mini DIN female LSZH jacketed low PIM cable using SR402FLJ low PIM coax with heatshrink, RoHS. | 0 | |||
| PE3C2019-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. 1.0/2.3 Plug to BNC Male Cable 24 Inch Length Using RG316 Coax., Radio frequency assembly 1.0/2.3 plug to BNC male cable 24 inch length using RG316 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.0/2.3 plug to BNC male cable 24 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to BNC cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with 1.0/2.3 cable connection on one end and BNC cable connection on the other. Our 1.0/2.3 to BNC cable assembly has plug gender on end 1 and male on end 2. PE3C2019-24 can also be known as a 1.0/2.3 male to BNC plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. 1.0/2.3 male to BNC plug cable assembly PE3C2019-24 is built with RG316 which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to BNC cable connectors, has a 50 Ohm impedance and is single shielded. One connector features the crimp/solder attachment method and a brass body with nickel plating, while the other has crimp/crimp attachment method and brass body with nickel plating.Additional dimensions, specifications and CAD drawings for this PE3C2019-24 RF cable are available on our downloadable PDF datasheet.PE3C2019-24 can also be used in the other direction and will be BNC male to 1.0/2.3 plug cable assembly if the opposite connectivity is required. 1.0/2.3 male to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to BNC cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.0/2.3 RF cable assembly as per your requirements. |
| 0 | ||
| PE3C2019-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. 1.0/2.3 Plug to BNC Male Cable 48 Inch Length Using RG316 Coax., Radio frequency assembly 1.0/2.3 plug to BNC male cable 48 inch length using RG316 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.0/2.3 plug to BNC male cable 48 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to BNC cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with 1.0/2.3 cable connection on one end and BNC cable connection on the other. Our 1.0/2.3 to BNC cable assembly has plug gender on end 1 and male on end 2. PE3C2019-48 can also be known as a 1.0/2.3 male to BNC plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. 1.0/2.3 male to BNC plug cable assembly PE3C2019-48 is built with RG316 which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to BNC cable connectors, has a 50 Ohm impedance and is single shielded. One connector features the crimp/solder attachment method and a brass body with nickel plating, while the other has crimp/crimp attachment method and brass body with nickel plating.Additional dimensions, specifications and CAD drawings for this PE3C2019-48 RF cable are available on our downloadable PDF datasheet.PE3C2019-48 can also be used in the other direction and will be BNC male to 1.0/2.3 plug cable assembly if the opposite connectivity is required. 1.0/2.3 male to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to BNC cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.0/2.3 RF cable assembly as per your requirements. |
| 0 | ||
| PE3C2018 | Pasternack Enterprises | 0 | ||||
 Vyrian | CL05C201JB5NNNC | Samsung Electro-Mechanics | Ceramic Capacitor, Multilayer, Ceramic, 50V, 5% +Tol, 5% -Tol, C0G, 30ppm/Cel TC, 0.0002uF, Surface Mount, 0402 RoHS : Compliant | 17,983 | ||
| BRC2016T101M | TAIYO YUDEN | General Purpose Inductor, 100uH, 20%, 1 Element, Ferrite-Core, SMD, 0806 RoHS : Compliant | 17,379 | |||
| RC2012J153CS | Samsung Electro-Mechanics | Fixed Resistor, Metal Glaze/thick Film, 0.125W, 15000ohm, 150V, 5% +/-Tol, 100ppm/Cel, Surface Mount, 0805 RoHS : Compliant | 15,183 | |||
| RC2012F302CS | Samsung Electro-Mechanics | Fixed Resistor, Metal Glaze/thick Film, 0.125W, 3000ohm, 150V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 0805 RoHS : Compliant | 14,268 | |||
| RC2012F101CS | Samsung Electro-Mechanics | Fixed Resistor, Metal Glaze/thick Film, 0.125W, 100ohm, 150V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 0805 RoHS : Compliant | 13,966 | |||
| RC2012J471CS | Samsung Electro-Mechanics | Fixed Resistor, Metal Glaze/thick Film, 0.125W, 470ohm, 150V, 5% +/-Tol, 100ppm/Cel, Surface Mount, 0805 RoHS : Compliant | 13,700 | |||
| RC2012F474CS | Samsung Electro-Mechanics | Fixed Resistor, Metal Glaze/thick Film, 0.125W, 470000ohm, 150V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 0805 RoHS : Compliant | 11,057 | |||
| RC2012F104CS | Samsung Electro-Mechanics | Fixed Resistor, Metal Glaze/thick Film, 0.125W, 100000ohm, 150V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 0805 RoHS : Compliant | 10,348 | |||
| C2012X5R1C106M125AC | TDK Corporation | Ceramic Capacitor, Multilayer, Ceramic, 16V, 20% +Tol, 20% -Tol, X5R, 15% TC, 10uF, Surface Mount, 0805 RoHS : Compliant | 8,329 | |||
| ADSST-ENC-2016 | Analog Devices Inc | 6,337 | ||||
| DSC2010FI1-A0003 | Microchip Technology Inc | CMOS Output Clock Oscillator, 150MHz Nom RoHS : Compliant | 5,310 | |||
XC2018-130TQ100C | AMD Xilinx | Field Programmable Gate Array, 100 CLBs, 1000 Gates, 130MHz, 100-Cell, CMOS, PQFP100 RoHS : Not Compliant | 3,457 | |||
EPM5016PC20-15 | Altera Corporation | OT PLD, 15ns, CMOS, PDIP20 | 2,792 | |||
| XC2018L10VQ100I | AMD Xilinx | 2,222 | ||||
| GHVC2010-470KFT3 | Tt Electronics Plc | Fixed Resistor, Metal Glaze/thick Film, 0.5W, 470000ohm, 2000V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 2010 | 873 | |||
 Waytek, Inc. | DHURC-2-01 | Essentra Components | Plug In Routing Clip Clip On 3.2mm 1.6mm PA Natural |
| 1,000 | |
 Win Source Electronics | C2012X5R1E226MT000E | TDK Corporation | Multilayer Ceramic Capacitors MLCC - SMD/SMT MLCC,0805,X5R,25V,22uF,1.25mm |
| 210,000 | |
| NSS1C201LT1G | onsemi | TRANS NPN 100V 2A SOT-23 RoHS : Compliant |
| 120,000 | ||
| C2012X7T2E104KT000N | TDK Corporation | Multilayer Ceramic Capacitors MLCC - SMD/SMT MLCC,0805,X7T,250V,0.1uF,1.25mm |
| 100,000 | ||
| C2012X7R1E474KT000N | TDK Corporation |
| 80,000 | |||
| C2012X7R1E475KT000N | TDK Corporation |
| 60,000 | |||
| C2012X7R1H225KT000E | TDK Corporation |
| 40,000 | |||
| C2012X5R1H225K125AB | TDK Corporation | CAP CER 2.2UF 50V X5R 0805 / 2.2 µF ±10% 50V Ceramic Capacitor X5R 0805 (2012 Metric) RoHS : Compliant |
| 38,000 | ||
| C2012X7R2A104KT0L0U | TDK Corporation |
| 25,100 | |||
| C2012C0G1H223J125AA | TDK Corporation | RoHS : Compliant |
| 12,000 | ||
| EPC2010C | Efficient Power Conversion | GANFET N-CH 200V 22A DIE OUTLINE RoHS : Compliant |
| 10,394 | ||
| C2012X5R1V226M125AC | TDK Corporation | CAP CER 22UF 35V X5R 0805 RoHS : Compliant |
| 10,200 | ||
| RC2010JK-070RL | YAGEO Corporation | RES SMD 0.0 OHM JUMPER 3/4W 2010 RoHS : Compliant |
| 8,000 | ||
| CBC2016T2R2M | TAIYO YUDEN | FIXED IND 2.2UH 720MA 260 MOHM RoHS : Compliant |
| 3,690 | ||
| RC2010FK-0733R2L | YAGEO Corporation | RES SMD 33.2 OHM 1% 3/4W 2010 RoHS : Compliant |
| 2,600 | ||
| MIC2019YM6-TR | Microchip Technology Inc | IC DISTRIBUTION SW ADJ SOT23-6 RoHS : Compliant |
| 1,794 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
English ▼ 
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand