| Electronic Components Datasheet Search |
|
A74-R2 Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() Avnet Americas | 891-001-15PA1-0A7-48J | Glenair Inc | - Bulk (Alt: 891-001-15PA1-0A7-48J) RoHS : Not Compliant | 2 | ||
| 891-002-21SA2-0A7-48J | Glenair Inc | - Bulk (Alt: 891-002-21SA2-0A7-48J) RoHS : Not Compliant | 2 | |||
| R7FA2E2A74CNJ#BA1 | Renesas Electronics Corporation | MCU 32-Bit RA2E2 ARM Cortex-M23 RISC 64KB Flash 1.6V to 5.5V 20-Pin HWQFN Tray - Trays (Alt: R7FA2E2A74CNJ#BA1) RoHS : Compliant |
| 0 | ||
| B40921A7417M100 | TDK Corporation | HYBRID POLYMER SMD 410UF 35V - Tape and Reel (Alt: B40921A7417M100) RoHS : Compliant |
| 0 | ||
| BGA748L16E6327XTSA1 | Infineon Technologies AG | - Tape and Reel (Alt: BGA748L16E6327XTSA1) RoHS : Compliant | 0 | |||
ATS-20A-74-C3-R0![]() | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,FINE-PITCH,STRAIGHT, - Trays (Alt: ATS-20A-74-C3-R0) RoHS : Compliant |
| 0 | ||
AMPMGDA-74.2500T![]() | Abracon Corporation | MEMS Oscillator, 74.25 MHz, SMD, 1.6mm x 1.2mm, 25 ppm, 3.3 V, AMPM - Tape and Reel (Alt: AMPMGDA-74.2500T) RoHS : Compliant | 0 | |||
AMPMGEA-74.2500T3![]() | Abracon Corporation | MEMS Oscillator, 74.25 MHz, SMD, 1.6mm x 1.2mm, 50 ppm, 3.3 V, AMPM - Tape and Reel (Alt: AMPMGEA-74.2500T3) RoHS : Compliant | 0 | |||
AMPMGFA-74.2500![]() | Abracon Corporation | MEMS Oscillator, 74.25 MHz, SMD, 1.6mm x 1.2mm, 25 ppm, 3.3 V, AMPM - Bulk (Alt: AMPMGFA-74.2500) RoHS : Compliant | 0 | |||
| SMJD-2205007C-XXN2RRA74H038ALL | Seoul Semiconductor | LINEAR BAR WITH LENS - Boxed Product (Development Kits) (Alt: SMJD-2205007C-XXN2RRA74H038ALL) RoHS : Not Compliant | 0 | |||
| K61A741 | TE Connectivity | - Bag (Alt: 1618276-9) RoHS : Not Compliant |
| 0 | ||
| ASA7-48.000MHZ-LC-T | Abracon Corporation | CRYSTAL OSCILLATOR 2016 4-SMD 48MHZ 50PPM -40C ~ 85C CMOS 1.2V - Tape and Reel (Alt: ASA7-48.000MHZ-LC-T) RoHS : Compliant |
| 0 | ||
| 353NB6A74AR | CTS Corporation | - Tape and Reel (Alt: 353NB6A74AR) RoHS : Compliant | 0 | |||
| XD6122A744MR-Q | Torex Semiconductor LTD | Voltage Supervisor, 4.4V, 1 V to 6 V, Open-Drain, SOT-25, 5 Pins, Surface Mount, 3.13 ms, -40 ?C - Tape and Reel (Alt: XD6122A744MR-Q) RoHS : Compliant |
| 0 | ||
| MS3189A74C | Glenair Inc | - Bulk (Alt: MS3189A74C) RoHS : Not Compliant | 0 | |||
![]() Newark | B40921A7417M000 | TDK Corporation | Hybrid Alu Elec Cap, 410Uf, 35V, Smd; |Tdk B40921A7417M000 RoHS : Compliant |
| 2,500 | |
| B32653A7473J000 | TDK Corporation | Capacitor, 47Nf 1250V; |Tdk B32653A7473J000 RoHS : Not Compliant |
| 1,880 | ||
TDA7492P13TR![]() | STMicroelectronics | Amplifier, Class D, 2X25W, Powersso-36; |Stmicroelectronics TDA7492P13TR RoHS : Compliant |
| 707 | ||
TDA7492P13TR![]() | STMicroelectronics | Amplifier, Class D, 2X25W, Powersso-36; |Stmicroelectronics TDA7492P13TR RoHS : Compliant |
| 707 | ||
TDA7418![]() | STMicroelectronics | Audio Processor, 4 Ch, Soic-20; |Stmicroelectronics TDA7418 RoHS : Compliant |
| 419 | ||
| B40920A7437M000 | TDK Corporation | Cap, 430Uf, 35V, Alu Elec, Hybrid, Smd; |Tdk B40920A7437M000 RoHS : Compliant |
| 400 | ||
| B40920A7437M000 | TDK Corporation | Cap, 430Uf, 35V, Alu Elec, Hybrid, Smd; |Tdk B40920A7437M000 RoHS : Compliant |
| 400 | ||
TDA7492MV13TR![]() | STMicroelectronics | Audio Power Amp, D, 0 To 70Deg C; |Stmicroelectronics TDA7492MV13TR RoHS : Compliant |
| 230 | ||
TDA7492MV13TR![]() | STMicroelectronics | Audio Power Amp, D, 0 To 70Deg C; |Stmicroelectronics TDA7492MV13TR RoHS : Compliant |
| 230 | ||
| B41799A7498Q001 | TDK Corporation | Cap Alu Elec, 4900Uf, 35V, -10%, +30%; |Tdk B41799A7498Q001 RoHS : Compliant |
| 199 | ||
| ALPHA7/4M/FMEF/SMAM/S/S/11 | Siretta Ltd | Puck Antenna, Vert, 1.8Ghz, 2Dbi; |Siretta ALPHA7/4M/FMEF/SMAM/S/S/11 RoHS : Compliant |
| 83 | ||
| B32652A7473J000 | TDK Corporation | Capacitor, 0.047Uf, 500V, Radial; |Tdk B32652A7473J000 RoHS : Compliant |
| 30 | ||
| A74H7224SSLP3PT | nVent Hoffman | Metal Enclosure; |Nvent Hoffman A74H7224SSLP3PT RoHS : Compliant |
| 11 | ||
| A74H7212SSLP3PT | nVent Hoffman | Metal Enclosure; |Nvent Hoffman A74H7212SSLP3PT RoHS : Compliant |
| 3 | ||
| A74H6012SSLP3PT | nVent Hoffman | Metal Enclosure; |Nvent Hoffman A74H6012SSLP3PT RoHS : Compliant |
| 1 | ||
![]() RS | 22-05-3021 (A-7478-02A222) | Molex | RIGHT-ANGLE PCB HEADER WITH FRICTION LOCK, 2 CIRCUITS, KK 254 SERIES. |
| 5,818 | |
| 22-05-3041 (A-7478-04A222) | Molex | 0.100 IN RIGHT ANGLE HEADER, 4 CIRCUITS, WHITE, 7478 SERIES |
| 2,213 | ||
| 22-05-3061 (A-7478-06A222) | Molex | HEADER KK 90DEG SN FRICTN LOCK 6W 2.54MM |
| 552 | ||
| 22-05-3081 (A-7478-08A222) | Molex | HEADERS R/A PCB HDR 8P TIN FRICTION LOCK |
| 46 | ||
| 22-12-2044 (A-7478-04A241) | Molex | HEADERS R/A PCB HDR 4P GOLD FRICTION LOCK |
| 19 | ||
| 335A744 | Bomar Interconnect Products Inc | CONNECTOR, RF COAXIAL, BNC IN-SERIES ADAPTER, BULKHEAD JACK TO JACK,75 OHM |
| 18 | ||
| CA7-43-00-120 | Sprecher + Schuh | CA7 CONTACTOR, 43A, 110V 50HZ / 120V 60HZ AC, COIL CODE 120, 3-POLES, CA7 |
| 7 | ||
| M18RGX7PQPMA (74287) | Banner Engineering Corp | M18RGX7PQPMA EZ-LIGHT 4-PIN RED/GRN/X PNP W/RED IN, EZ-LIGHT M18 SERIES |
| 7 | ||
| CA747/10 | Altech Corporation | JUMPER TERMBLK 10POLE 6MM DINRAIL INTERNAL INSULATED 0.4NMTORQUE |
| 6 | ||
| SPA7415-12 | Duff-Norton | ELECTRIC LINEAR ACTUATOR, 12" STROKE, 1500 LBS, 230 VAC, SPA SERIES |
| 2 | ||
| CA7-43-10-120 | Sprecher + Schuh | CA7 CONTACTOR, 43A, 110V 50HZ / 120V 60HZ AC, 1NO, COIL CODE 120, 3-POLES, CA7 |
| 2 | ||
| CA7-43E-00-24E | Sprecher + Schuh | CA7 CONTACTOR, 43A, 24V DC ELEC. COIL, , COIL CODE , 3-POLES, CA7 |
| 2 | ||
| SPA7415-18 | Duff-Norton | ELECTRIC LINEAR ACTUATOR, 18" STROKE, 1500 LBS, 230 VAC, SPA SERIES |
| 1 | ||
| 10250TA74 | Eaton Cutler-Hammer | LAMP REMOVAL TOOL |
| 1 | ||
| SYA7420-02T | SMC Corporation of America | VALVE, AIR PILOT, BODY PT, 1/4NPT |
| 1 | ||
![]() STMicroelectronics | UA741CDT![]() | STMicroelectronics | Wide applications range RoHS : Compliant |
| 5,659 | |
TDA7492MV13TR![]() | STMicroelectronics | 50W Mono BTL class-D audio amplifier RoHS : Compliant |
| 1,509 | ||
TDA7498MVTR![]() | STMicroelectronics | 100-watt mono BTL class-D audio amplifier RoHS : Compliant |
| 1,177 | ||
TDA7491P13TR![]() | STMicroelectronics | 10W+10W dual BTL class-D audio amplifier RoHS : Compliant |
| 958 | ||
| TDA7492ETR | STMicroelectronics | 79W+79W dual BTL class D audio amplifier RoHS : Compliant |
| 875 | ||
TDA7419![]() | STMicroelectronics | 3Band Car Audio processor RoHS : Compliant |
| 854 | ||
TDA7492P13TR![]() | STMicroelectronics | 25 W + 25 W dual BTL class-D audio amplifier RoHS : Compliant |
| 840 | ||
| TDA7492PETR | STMicroelectronics | 45W+45W dual BTL class D audio amplifier RoHS : Compliant |
| 579 | ||
| TDA7498LTR | STMicroelectronics | 80 W + 80 W dual BTL class-D audio amplifier RoHS : Compliant |
| 348 | ||
UA741ID![]() | STMicroelectronics | Wide applications range RoHS : Compliant |
| 22 | ||
TDA7418![]() | STMicroelectronics | 3 BAND CAR AUDIO PROCESSOR RoHS : Compliant |
| 5 | ||
| TDA7496 | STMicroelectronics | 5 W + 5 W amplifier with DC volume control RoHS : Compliant |
| 0 | ||
| TDA7491HVU13TR | STMicroelectronics | 20W+20W dual BTL class-D audio amplifier RoHS : Compliant |
| 0 | ||
TDA7419TR![]() | STMicroelectronics | 3Band Car Audio processor RoHS : Compliant |
| 0 | ||
TDA7468D13TR![]() | STMicroelectronics | Tone controlAudio processor with bass ALC RoHS : Compliant |
| 0 | ||
![]() Microchip Technology Inc | DSC6183HI1A-745K000 | Microchip Technology Inc | MEMS OSC, LVCMOS, 745KHz, 50PPM, 1.8-3.3V, -40 to 85C, 1.6 x 1.2mm, VFLGA, Projected EOL: 2028-08-31 - Contact for Pricing RoHS : Compliant | 0 | ||
| DSC6083HI1A-745K000T | Microchip Technology Inc | MEMS OSC, LVCMOS, 745KHz, 50PPM, 1.8-3.3V, -40 to 85C, 1.6 x 1.2mm, VFLGA, Projected EOL: 2028-06-22 - Contact for Pricing RoHS : Compliant | 0 | |||
| DSC6183HI1A-745K000T | Microchip Technology Inc | MEMS OSC, LVCMOS, 745KHz, 50PPM, 1.8-3.3V, -40 to 85C, 1.6 x 1.2mm, VFLGA, Projected EOL: 2028-08-31 - Contact for Pricing RoHS : Compliant | 0 | |||
| VS-702-ECT-KXAA-741M745700 | Microchip Technology Inc | VS-702-ECT-KXAA-741M745700, DFN, Projected EOL: 2046-01-28 RoHS : Compliant |
| 0 | ||
![]() Bisco Industries | 635A-7408-16 | Concord Electronics Inc | 341 | |||
| 635A-7410-16 | Concord Electronics Inc | 200 | ||||
| 602A-7405-16 | Concord Electronics Inc | 200 | ||||
| 643A-7406-16 | Concord Electronics Inc | 100 | ||||
| 602A-7409-16 | Concord Electronics Inc | 100 | ||||
| -1726A74 MCM | RAF Electronic Hardware | 98 | ||||
| 635A-7432-19 | Concord Electronics Inc | 50 | ||||
| BLC16TA74SL12C6 | Avibank MFG Inc | 15 | ||||
| A7470 | MISC. INDUSTRIAL HRD | 10 | ||||
| A-7412-632-24 | Globe Electronic Hardware Inc | 5 | ||||
| 635A-7428-19 | Concord Electronics Inc | 2 | ||||
![]() Rochester Electronics | LA74310LP-TLM-E | onsemi | AUDIO ICS RoHS : Compliant |
| 414,000 | |
| BGA748L16E6327XTSA1 | Infineon Technologies AG | Narrow Band Low Power Amplifier, 869MHz Min, 894MHz Max RoHS : Compliant |
| 570,000 | ||
OPA743NA/3K![]() | Texas Instruments | Op Amp Standard 7MHz SOT-23-5 T/R RoHS : Compliant |
| 8,558 | ||
UA741CPSR![]() | Texas Instruments | Op Amp Standard 1MHz 8-SOIC T/R RoHS : Compliant |
| 14,000 | ||
TPA741DR![]() | Texas Instruments | Audio Amplifier Class AB 1-Channel (Mono) 700mW 8-SOIC T/R RoHS : Compliant |
| 2,350 | ||
UA741CDR![]() | Texas Instruments | Op Amp Standard 1MHz 8-SOIC T/R RoHS : Compliant | 1 | |||
| KA7405D | Fairchild Semiconductor Corporation | Motor Driver ICs Driver - Fully Integrated, Control and Power Stage RoHS : Not Compliant |
| 8,293 | ||
| D3172MMA7455L | Freescale Semiconductor | Accelerometers ±2g, ±4g, ±8g I²C, SPI 14-LGA Tube RoHS : Compliant |
| 2 | ||
| MMA7457LR1 | Freescale Semiconductor | High Performance Accelerometer IC RoHS : Compliant |
| 13,940 | ||
| UA741MJ/B | Rochester Electronics LLC | UA741 - General-Purpose Operational Amplifiers RoHS : Not Compliant |
| 1,847 | ||
| LA74309TT-TLM-E | SANYO Semiconductor Co Ltd | Microphone Amplifier For Digital Still Camera ' RoHS : Compliant |
| 1,383 | ||
| TDA7491HVU13TR | STMicroelectronics | Audio Amplifier Class D 2-Channel (Stereo) 20W 36-SOP T/R RoHS : Compliant |
| 10,000 | ||
| TDA7496 | STMicroelectronics | TDA7496 - 5 W plus5 W Amp with DC Volume Control RoHS : Compliant |
| 16,828 | ||
UA741IDT![]() | STMicroelectronics | Op Amp Standard 1MHz 8-SOIC T/R RoHS : Compliant |
| 136 | ||
| 530EA74M2500DGR | Skyworks Solutions Inc | Differential/single-ended; single frequency XO; OE pin 2 (pin 1 for CMOS); 10-1417 MHz RoHS : Compliant |
| 337 | ||
![]() Sager | 234A742-3-0 | TE Connectivity | Heat Shrink Cable Boots & End Caps 234A742-3-0 | 0 | ||
ATS-20A-74-C3-R0![]() | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,FINE-PITCH,STRAIGHT, HOLE PATTERN:RIGHT-TABBED,BLUE,T412 RoHS : Compliant |
| 0 | ||
| HR10G-10R-12PA(74) | Hirose Electric Co Ltd | Circular Push Pull Connectors 12P M STRT RECEP T/H PSH-PUL CON SHIELDE RoHS : Compliant | 0 | |||
| P8-A741314 | OTTO Engineering Inc | VANDAL RESISTANT PUSHBUTTON SWITCH RoHS : Compliant |
| 0 | ||
| GA10K3A748I | TE Connectivity | NTC Thermistors DISC-DISCRETE |
| 0 | ||
| LTILA74-1S-WH-WH-FW/12V | Carling Technologies | Rocker Switches LTILA741SWHWHFW/12V |
| 0 | ||
| AAA7423-00 | TE Connectivity | TE Connectivity 91A1-20-18-1-B-HE400 RoHS : Not Compliant | 0 | |||
| GA8K3A741I | TE Connectivity | DISC- +- 5.5% 35 C |
| 0 | ||
ATS-19A-74-C1-R0![]() | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,FINE-PITCH,STRAIGHT, HOLE PATTERN:RIGHT-TABBED,BLUE,NO TIM RoHS : Compliant |
| 0 | ||
| AAA7412-00 | TE Connectivity | TE Connectivity 91A1-20-15-1-B-HE300 | 0 | |||
| AAA7449-00 | TE Connectivity | TE Connectivity 91A1-22-04-1-C-HE050 RoHS : Compliant | 0 | |||
| AAA7494-00 | TE Connectivity | TE Connectivity 91A1-22-14-1-B-HE300 | 0 | |||
| DRA74-101-R | Eaton Bussmann | Power Inductors - SMD 100uH 0.929A 0.419ohms |
| 0 | ||
| DRA74-471-R | Eaton Bussmann | Power Inductors - SMD 470uH 0.42A 1.93ohms |
| 0 | ||
ATS-15A-74-C2-R0![]() | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,FINE-PITCH,STRAIGHT, HOLE PATTERN:RIGHT-TABBED,BLUE,T766 |
| 0 | ||
![]() TME | CR-03FA7--470R | Viking Technology | Resistor: metal film; 470Ω; SMD; 0603; 100mW; ±1%; 75V; -55÷155°C |
| 10,000 | |
| AA74000013 | Amphenol Corporation | Angled |
| 2,040 | ||
| 2EIA74/105FS -AS | ANROL Electronic Components | Safety sign; informative; self-adhesive folie; W: 74mm; H: 105mm |
| 60 | ||
| A7402DM-18 | Bahco | Socket: 12-angles; socket spanner; 18mm; 3/8"; alloy steel |
| 1 | ||
| A7402DM-19 | Bahco | Socket: 12-angles; socket spanner; 19mm; 3/8"; alloy steel |
| 0 | ||
| B32651A7472K189 | TDK Corporation | Capacitor: polypropylene; 4.7nF; 1.25kVDC; 450VAC; 13x11x5mm; THT RoHS : Compliant |
| 0 | ||
| B32652A7473J189 | TDK Corporation | Capacitor: polypropylene; MKP; 47nF; 1.25kVDC; 500VAC; THT; ±5% RoHS : Compliant |
| 0 | ||
| B41899A7468M000 | TDK Corporation | Capacitor: electrolytic; THT; 4.6mF; 35VDC; Ø18x25mm; Pitch: 7.5mm RoHS : Compliant |
| 0 | ||
| CR-10FA7---47K | Viking Technology | Resistor: metal film; 47kΩ; SMD; 1210; 500mW; ±1%; 200V; -55÷155°C |
| 0 | ||
| CR-10FA7---4K7 | Viking Technology | Resistor: metal film; 4.7kΩ; SMD; 1210; 500mW; ±1%; 200V; -55÷155°C |
| 0 | ||
| CR-12FA7--470R | Viking Technology | Resistor: metal film; 470Ω; SMD; 2512; 1W; ±1%; 250V; -55÷155°C |
| 0 | ||
| NSYTJPLA74G | Schneider Electric | Canopy; PLA; for enclosures |
| 0 | ||
| A7402DM-7 | Bahco | Socket: 12-angles; socket spanner; 7mm; 3/8"; alloy steel |
| 0 | ||
| CR-10FA7--470K | Viking Technology | Resistor: metal film; 470kΩ; SMD; 1210; 500mW; ±1%; 200V; -55÷155°C |
| 0 | ||
| DRA74-471-R | Eaton Electronics | Inductor: wire; SMD; 471.5uH; Ioper: 383mA; R: 1.93Ω; ±20%; -40÷165°C |
| 0 | ||
![]() Ameya Holding Limited | OPA743NA/3K![]() | Texas Instruments | IC OPAMP GP 7MHZ RRO SOT23-5 RoHS : Compliant | 38,564 | ||
OPA743NA/250![]() | Texas Instruments | IC OPAMP GP 7MHZ RRO SOT23-5 RoHS : Compliant | 24,195 | |||
TDA7439DS13TR![]() | STMicroelectronics | TDA7439DS Series 10.2 V Three-Band Digitally-Controlled Audio Processor -SOIC-28 RoHS : Compliant | 5,558 | |||
UA741CP![]() | Texas Instruments | IC: operational amplifier; 1MHz; Channels: 1; DIP8; tube RoHS : Compliant | 1,751 | |||
TDA7492P13TR![]() | STMicroelectronics | TDA7492P Series 26 V 25 W Class D Stereo SMT Audio Amplifier - POWERSSO-36 RoHS : Compliant | 1,547 | |||
TDA7491LP13TR![]() | STMicroelectronics | TDA7491LP Series 14 V 2 x 5 W Dual BTL Class-D Audio Amplifier - PowerSSO-36 RoHS : Compliant | 314 | |||
| BD81A74MUV-ME2 | ROHM Semiconductor | 4ch 内置电流驱动器 升降压型 车载用白色LED驱动器 RoHS : Compliant |
| 250 | ||
| BD81A74EFV-ME2 | ROHM Semiconductor | 4ch 内置电流驱动器 升降压型 车载用白色LED驱动器 RoHS : Compliant |
| 250 | ||
![]() ComSIT USA | B41851A7477M | AVAILABLE EU | 7,050 | |||
| TDA7439DS13TR | AVAILABLE EU | 380 | ||||
![]() ComSIT USA | UA748IN | SGS Semiconductor Ltd | PRECISION SINGLE OPERATIONAL AMPLIFIER Operational Amplifier, 1 Func, 3000uV Offset-Max, BIPolar, PDIP8 RoHS : Not Compliant | 4,200 | ||
UA741CDR![]() | Texas Instruments | GENERAL-PURPOSE OPERATIONAL AMPLIFIER Operational Amplifier, 1 Func, 7500uV Offset-Max, BIPolar, PDSO8 RoHS : Compliant | 1,145 | |||
| HD40L4808A74FS | Renesas Electronics Corporation | Electronic Component RoHS : Not Compliant | 999 | |||
UA741HM![]() | Fairchild Semiconductor Corporation | Operational Amplifier, 1 Func, 6000uV Offset-Max, BIPolar RoHS : Not Compliant | 650 | |||
| TDA7460ND | SGS Semiconductor Ltd | CAR RADIO SIGNAL PROCESSOR Consumer Circuit, BICMOS, PDSO20 RoHS : Not Compliant | 615 | |||
UA741CDG4![]() | Texas Instruments | GENERAL-PURPOSE OPERATIONAL AMPLIFIER Operational Amplifier, 1 Func, 7500uV Offset-Max, BIPolar, PDSO8 RoHS : Compliant | 525 | |||
| TDA7479DTRSLF | SGS Semiconductor Ltd | SINGLE CHIP RDS DEMODULATOR + FILTER Consumer Circuit, CMOS, PDSO16 RoHS : Compliant | 510 | |||
| UA741CH | Thomson Components-Mostek Corp | Electronic Component RoHS : Not Compliant | 250 | |||
| B41888A7477M | TDK Electronics | SINGLE ENDED LL CAPACITOR Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 35V, 20% +Tol, 20% -Tol, 470uF, Through Hole Mount RoHS : Compliant | 250 | |||
| TDA7449 | SGS Semiconductor Ltd | TONE CONTROL DIGITALLY CONTROLLED AUDIO PROCESSOR Tone Control Circuit, 2 Channel(s), BICMOS, PDIP20 RoHS : Not Compliant | 235 | |||
| TDA7454 | STMicroelectronics | 4 X 35W HIGH EFFICIENCY QUAD BRIDGE CAR RADIO AMPLIFIER Audio Amplifier, 42W, 4 Channel(s), 1 Func, BCDMOS RoHS : Compliant | 102 | |||
TDA7462D![]() | STMicroelectronics | DUAL AUDIOPROCESSOR WITH COMPANDER AND SUBWOOFER OUTPUT Consumer Circuit, BICMOS, PDSO28 RoHS : Compliant | 99 | |||
UA741AHM![]() | Fairchild Semiconductor Corporation | SINGLE OPERATIONAL AMPLIFIER Operational Amplifier, 1 Func, 4000uV Offset-Max, BIPolar, MBCY8 RoHS : Not Compliant | 11 | |||
UA741HC![]() | Fairchild Semiconductor Corporation | OPERATIONAL AMPLIFIER Operational Amplifier, 1 Func, 7500uV Offset-Max, BIPolar, MBCY8 RoHS : Not Compliant | 9 | |||
| UA748FM | Fairchild Semiconductor Corporation | OPERATIONAL AMPLIFIER Operational Amplifier, 1 Func, 6000uV Offset-Max, BIPolar, CDFP10 RoHS : Not Compliant | 7 | |||
![]() Interstate Connecting Components | MS3189A74C | Glenair Inc | EMI ENVIRON ADAPTER | 0 | ||
| GA8K3A741I | TE Connectivity | DISC- +- 5.5% 35 C | 0 | |||
| MS3188A74N | Glenair Inc | EMI ENVIRON ADAPTER | 0 | |||
| 891-001-51PA2-0A7-42J | Glenair Inc | CABLE ASSEMBLY DISCRETE WIRE RoHS : Compliant | 0 | |||
| DBA 74H 37-924 PN | TE Connectivity | DBA 74H 37-924 PN | 0 | |||
| 44A7422-4-1L | TE Connectivity | RoHS : Not Compliant |
| 0 | ||
| 44A7422-6-9 | TE Connectivity | RoHS : Not Compliant |
| 0 | ||
| DBA 74H 12-0 PN SCC | TE Connectivity | DBA 74H 12-0 PN SCC | 0 | |||
| 55A7474-20-MST4-9CS227 | TE Connectivity | 55A7474-20-MST4-9CS2275 | 0 | |||
| SIM2S2A74 | Amphenol PCD | SIM2S2A74 PROTECTIVE CAP |
| 0 | ||
| DBA 74H 27-13 PN 395 | TE Connectivity | DBA 74H 27-13 PN 395 | 0 | |||
| 44A7422-0-91 | TE Connectivity | 44A7422-0-91 RoHS : Not Compliant | 0 | |||
| FDBA 74H 14-19 PN-K-A6 | TE Connectivity | FDBA 74H 14-19 PN-K-A6242 | 0 | |||
| FDBA 74H 16-8 PN-K-A13 | TE Connectivity | FDBA 74H 16-8 PN-K-A1396 | 0 | |||
| FDBA 74H 18-32 PN-K-B6 | TE Connectivity | FDBA 74H 18-32 PN-K-B6280 | 0 | |||
![]() PEI Genesis | S3428A-74100342 | SOURIAU-SUNBANK |
| 0 | ||
| MS3189A74C | SOURIAU-SUNBANK |
| 0 | |||
| S3715FM-A7412A34 | SOURIAU-SUNBANK |
| 0 | |||
| S3715FM-A7416A12 | SOURIAU-SUNBANK |
| 0 | |||
| 8D519Z18SA747 | SOURIAU-SUNBANK |
| 0 | |||
| 8D525ZC46PA747 | SOURIAU-SUNBANK |
| 0 | |||
| MS3188A74N | SOURIAU-SUNBANK |
| 0 | |||
| 8D025Z46PA747 | SOURIAU-SUNBANK |
| 0 | |||
| 8D725ZC46PA747 | SOURIAU-SUNBANK |
| 0 | |||
| S4204A7418-99-2 | SOURIAU-SUNBANK |
| 0 | |||
| S4603FMA7404L34 | SOURIAU-SUNBANK |
| 0 | |||
| S5172FMA7412A-12 | SOURIAU-SUNBANK |
| 0 | |||
| 8D525J46PA747 | SOURIAU-SUNBANK |
| 0 | |||
| 8D719ZC18SA747 | SOURIAU-SUNBANK |
| 0 | |||
| SIM2S2A74 | Amphenol PCD |
| 0 | |||
![]() Richardson RFPD | 335A744 | Winchester Interconnect | Conn BNC Adapter F/F 0Hz to 2GHz 75Ohm ST Panel Mo RoHS : Compliant | 0 | ||
| 511FAA74M2500CAG | Skyworks Solutions Inc | Surface MountCrystal Oscillator RoHS : Compliant |
| 0 | ||
| DRA74-101-R | Eaton Corporation | Inductor Power Shielded Drum Core 98.5uH/100uH 20% RoHS : Compliant |
| 0 | ||
| DRA74-471-R | Eaton Corporation | Inductor Power Shielded Drum Core 471.5uH/470uH 20 RoHS : Compliant |
| 0 | ||
| 530EA74M2500DGR | Skyworks Solutions Inc | Oscillator XO 74.25MHz ±61.5ppm LVPECL 55% 2.5V 6- RoHS : Compliant |
| 0 | ||
| DRA74-220-R | Eaton Corporation | Inductor Power Shielded Drum Core 22.25uH/22uH 20% RoHS : Compliant |
| 0 | ||
| 510CCA74M2500BAG | Skyworks Solutions Inc | Oscillator XO 74.25MHz ±30ppm CMOS 52% 3.3V 4-Pin RoHS : Compliant |
| 0 | ||
| 511BCA74M2500BAGR | Skyworks Solutions Inc | Oscillator XO 74.25MHz ±30ppm LVDS 52% 3.3V 6-Pin RoHS : Compliant |
| 0 | ||
| 511ECA74M2500AAG | Skyworks Solutions Inc | Oscillator XO 74.25MHz ±30ppm LVPECL 52% 2.5V 6-Pi RoHS : Compliant |
| 0 | ||
| 515BBA74M2500AAG | Skyworks Solutions Inc | Oscillator VCXO 74.25MHz ±20ppm (Stability) LVDS 5 RoHS : Compliant |
| 0 | ||
| 590CA74M2500DGR | Skyworks Solutions Inc | Oscillator XO 74.25MHz ±100ppm 15pF CMOS 55% 3.3V RoHS : Compliant |
| 0 | ||
| 510KBA74M2500BAGR | Skyworks Solutions Inc | Oscillator XO 74.25MHz ±50ppm CMOS 52% 1.8V 4-Pin RoHS : Compliant |
| 0 | ||
| 510ABA74M2500AAG | Skyworks Solutions Inc | Oscillator XO 74.25MHz ±50ppm LVPECL 52% 3.3V 6-Pi RoHS : Compliant |
| 0 | ||
| 511FCA74M2500AAG | Skyworks Solutions Inc | Oscillator XO 74.25MHz ±30ppm LVDS 52% 2.5V 6-Pin RoHS : Compliant |
| 0 | ||
| DRA74-331-R | Eaton Corporation | Inductor Power Shielded Drum Core 328.9uH/330uH 20 RoHS : Compliant |
| 0 | ||
![]() Chip 1 Exchange | B41820-A7475-M000 | TDK Electronics | INSTOCK | 10,000 | ||
UA748CP![]() | Texas Instruments | INSTOCK RoHS : Not Compliant | 7,000 | |||
| AA746AMA-AE | Sensirion | INSTOCK | 1,799 | |||
| UA748CP | INSTOCK | 1,062 | ||||
| B41821-A7477-M000 | INSTOCK | 1,000 | ||||
| VA741CP | Texas Instruments | INSTOCK | 920 | |||
| HPA74B | INSTOCK | 472 | ||||
| LA7416 | SANYO Semiconductor Co Ltd | INSTOCK | 240 | |||
| UA74ID | INSTOCK | 118 | ||||
| UA747CN | Circuit Systems Company Inc | INSTOCK | 75 | |||
TDA7418![]() | STMicroelectronics | INSTOCK RoHS : Compliant | 23 | |||
| SM-A-742931-5 | INSTOCK | 10 | ||||
| TDA7454 | STMicroelectronics | INSTOCK RoHS : Compliant | 9 | |||
UA747CN![]() | Texas Instruments | INSTOCK RoHS : Compliant | 4 | |||
| AA747 | INSTOCK | 1 | ||||
![]() Avnet Abacus | DRA74-101-R | Eaton Corporation | - Tape and Reel (Alt: DRA74-101-R) RoHS : Compliant | 0 | ||
| DRA74-471-R | Eaton Corporation | - Tape and Reel (Alt: DRA74-471-R) RoHS : Compliant | 0 | |||
| DRA74-220-R | Eaton Corporation | - Tape and Reel (Alt: DRA74-220-R) RoHS : Compliant | 0 | |||
| 353TB6A742T | CTS Corporation | - Tape and Reel (Alt: 353TB6A742T) RoHS : Compliant | 0 | |||
| 353SB3A74AT | CTS Corporation | - Tape and Reel (Alt: 353SB3A74AT) RoHS : Compliant | 0 | |||
| B41112A7475M | TDK Corporation | Aluminum Electrolytic Capacitor 47 uF 35 V 20 2000 hours 85C Radial Can SMD (Alt: B41112A7475M) RoHS : Compliant | 0 | |||
| B32652A7473J | TDK Corporation | General Purpose Film Capacitor Metallized PP Radial Box 2 Pin 0047 uF 5 500 V 125 kV (Alt: B32652A7473J000) RoHS : Compliant | 0 | |||
| B41044A7477M | TDK Corporation | 470UF 35V 10x20 Single Ended (Alt: B41044A7477M000) RoHS : Compliant | 0 | |||
| B32651A7472J | TDK Corporation | General Purpose Film Capacitor Metallized PP Radial Box 2 Pin 4700 pF 5 450 V 125 kV (Alt: B32651A7472J000) RoHS : Compliant | 0 | |||
AMPMGFA-74.2500![]() | Abracon Corporation | (Alt: AMPMGFA-74.2500) RoHS : Compliant | 0 | |||
AMPMAFA-74.2500![]() | Abracon Corporation | (Alt: AMPMAFA-74.2500) RoHS : Compliant | 0 | |||
| B32340C4011A740 | TDK Corporation | Power Film Capacitor 23 uF 440 V 8885 10 Metallized PP Can Stud Mount M12 (Alt: B32340C4011A740) RoHS : Compliant | 0 | |||
AMPMGDA-74.2500T![]() | Abracon Corporation | (Alt: AMPMGDA-74.2500T) RoHS : Compliant | 0 | |||
AMPMAFA-74.2500T![]() | Abracon Corporation | (Alt: AMPMAFA-74.2500T) RoHS : Compliant | 0 | |||
AMPMGEA-74.2500T3![]() | Abracon Corporation | (Alt: AMPMGEA-74.2500T3) RoHS : Compliant | 0 | |||
![]() Avnet Asia | MA74221101LF | Amphenol Corporation | (Alt: MA74221101LF) RoHS : Compliant | 0 | ||
| MA74221101LF | Amphenol Corporation | (Alt: MA74221101LF) RoHS : Compliant | 0 | |||
| GPHA102-0810A744K1AA | Greenconn Corp | GCTGPHA102-0810A744K1AA 2.54MM PITCH PIN (Alt: GPHA102-0810A744K1AA) RoHS : Compliant | 0 | |||
| A740KN477M1ELAS018 | KEMET Corporation | (Alt: A740KN477M1ELAS018) RoHS : Compliant | 0 | |||
| B32653A7473J189 | TDK Corporation | General Purpose Film Capacitor, Metallized PP, Radial Box - 2 Pin, 0.047 uF, ? 5%, 500 V, 1.25 kV (Alt: B32653A7473J189) RoHS : Compliant | 0 | |||
| R7FA2E2A74CNK#HA1 | Renesas Electronics Corporation | MCU 32-Bit RA Family ARM Cortex-M23 RISC 64KB Flash 1.6V to 5.5V 24-Pin HWQFN EP Embossed T/R (Alt: R7FA2E2A74CNK#HA1) RoHS : Compliant | 0 | |||
| DA7402-01 000OJ2 | Renesas Electronics Corporation | Audio Codec 4ADC/4DAC 32Bit 32-Pin WLCSP T/R (Alt: DA7402-01 000OJ2) RoHS : Compliant | 0 | |||
| GPHA102-1610A743K1AA | Greenconn Corp | GCTGPHA102-1610A743K1AA 2.54MM PITCH PIN (Alt: GPHA102-1610A743K1AA) RoHS : Compliant | 0 | |||
| DA7403-01 000OJ2 | Renesas Electronics Corporation | DASDA7403-01 000OJ2 BLUETOOTH (Alt: DA7403-01 000OJ2) RoHS : Compliant | 0 | |||
| SIRA74DP-T1-GE3 | Vishay Intertechnologies | N-CHANNEL 40-V (D-S) MOSFET (Alt: SIRA74DP-T1-GE3) RoHS : Compliant | 0 | |||
| B32653A7473J289 | TDK Corporation | (Alt: B32653A7473J289) RoHS : Compliant | 0 | |||
![]() Avnet Silica | UA741IDT![]() | STMicroelectronics | OP Amp Single GP 20V 8Pin SO N TR (Alt: UA741IDT) RoHS : Compliant | 50,000 | ||
UA741ID![]() | STMicroelectronics | (Alt: UA741ID) RoHS : Compliant | 26,300 | |||
UA741CDT![]() | STMicroelectronics | OP Amp Single GP 22V 8Pin SO N TR (Alt: UA741CDT) RoHS : Compliant | 10,000 | |||
TDA7440D013TR![]() | STMicroelectronics | Audio Processor 28Pin SO TR (Alt: TDA7440D013TR) RoHS : Compliant | 2,000 | |||
TDA7492P13TR![]() | STMicroelectronics | Audio Amp Speaker 2CH Stereo 25W ClassD 36Pin PowerSSO EP TR (Alt: TDA7492P13TR) RoHS : Compliant | 1,000 | |||
TDA7491HV13TR![]() | STMicroelectronics | Audio Power Amplifier Class D 2 x Stereo BTL 2 Channels 20 W x 2 8Ohm 5 V to 18 V 36 Pins PowerSSOEP (Alt: TDA7491HV13TR) RoHS : Compliant | 1,000 | |||
| QPA7489ATR13 | Qorvo | Cascadable SiGe HBT Amplifier DC to 3500MHz 3Pin SOT89 TR (Alt: QPA7489ATR13) RoHS : Compliant | 0 | |||
| R7FA2E2A74CBY | Renesas Electronics Corporation | (Alt: R7FA2E2A74CBY) RoHS : Compliant | 0 | |||
| E70321A74C458 | ELMOS SEMICONDUCTOR AG | (Alt: E70321A74C458) RoHS : Compliant | 0 | |||
| BD81A74EFV-ME2 | ROHM Semiconductor | LED Driver BoostBuckBoost 4Ch 24 LEDs PWM 40V 28Pin HTSSOP Emboss TR (Alt: BD81A74EFV-ME2) RoHS : Compliant | 0 | |||
TDA7492MV13TR![]() | STMicroelectronics | Audio Amp Speaker 1CH Mono 50W ClassD 36Pin PowerSSO TR (Alt: TDA7492MV13TR) RoHS : Compliant | 0 | |||
| TDA7491HVU13TR | STMicroelectronics | (Alt: TDA7491HVU13TR) RoHS : Compliant | 0 | |||
| R7FA2E2A74CNJ#HA1 | Renesas Electronics Corporation | (Alt: R7FA2E2A74CNJ#HA1) RoHS : Compliant | 0 | |||
| R7FA2E2A74CNK#HA1 | Renesas Electronics Corporation | - Tape and Reel (Alt: R7FA2E2A74CNK#HA1) RoHS : Compliant | 0 | |||
| SMJA-3G08D16G-A740ALL8 | Seoul Semiconductor | Acrich Led Module CCT 4000K CRI80 (Alt: SMJA-3G08D16G-A740ALL8) RoHS : Compliant | 0 | |||
![]() Braemac Americas-Symmetry | ASA7-48.000MHZ-LC-T | Abracon Corporation |
| 0 | ||
| ASA7-48.000MHZ-LR-T | Abracon Corporation |
| 0 | |||
| MA741.B.BI.001 | Taoglas Antenna Solutions | Pantheon MA741 2in1 Permanent Mount 4G/3G/2G 2xMIMO 3M CFD-200 SMA(M) |
| 0 | ||
| PA.740.A | Taoglas Antenna Solutions | PA.740.A Wideband Ceramic Antenna for 5G/4G Bands |
| 0 | ||
| MA741.W.B.BI.004 | Taoglas Antenna Solutions | Pantheon White Screwmount 2G/3G/4G(MIMO1) -5M CFD-200 SMA(M):2G/3G/4G(MIMO2)- 5M CFD-200 SMA(M) |
| 0 | ||
| ASA7-40.000MHZ-LC-T | Abracon Corporation |
| 0 | |||
| ASA7-40.000MHZ-LR-T | Abracon Corporation |
| 0 | |||
| MA741.W.A.BI.001 | Taoglas Antenna Solutions | Pantheon Screwmount 5G/4G(MIMO1&2)-3m TGC-200 SMA(M) White |
| 0 | ||
![]() Component Electronics, Inc | UA741CP![]() | Texas Instruments | IN STOCK SHIP TODAY RoHS : Compliant |
| 761 | |
| CA741CE | RCA | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 417 | ||
| MA746 | Panasonic Electronic Components | IN STOCK SHIP TODAY RoHS : Compliant |
| 220 | ||
| UA749DHC | Fairchild Semiconductor Corporation | IN STOCK SHIP TODAY |
| 71 | ||
| UA747DC | Fairchild Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 52 | ||
UA741CJG![]() | Texas Instruments | IN STOCK SHIP TODAY RoHS : Not Compliant | 42 | |||
| AD0612HB-A74GL-LF | ADDA USA Corporation | IN STOCK SHIP TODAY |
| 42 | ||
| UA741PC | Fairchild Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant | 40 | |||
| AD0824HB-A74GL-LF | ADDA USA Corporation | IN STOCK SHIP TODAY |
| 13 | ||
| B32653A7473J000 | TDK Electronics | IN STOCK SHIP TODAY RoHS : Compliant |
| 10 | ||
| VG-1201CA74.175800M-TBGC | Seiko Epson Corporation | IN STOCK SHIP TODAY |
| 10 | ||
| A74-2 | TriQuint Semiconductor | IN STOCK SHIP TODAY | 7 | |||
MMA7455LT![]() | Freescale Semiconductor | IN STOCK SHIP TODAY RoHS : Compliant |
| 2 | ||
![]() EBV Elektronik | UA741CD![]() | STMicroelectronics | OP Amp Single GP 22V 8Pin SO N Tube (Alt: UA741CD) RoHS : Compliant | 5,700 | ||
UA741IDT![]() | STMicroelectronics | OP Amp Single GP 20V 8Pin SO N TR (Alt: UA741IDT) RoHS : Compliant | 2,500 | |||
| OT 75/170-240/0A7 4DIM NFC G3 CE | Inventronics (Hangzhou) Inc | OT 751702400A7 4DIM NFC G3CEUNV1OSRAM (Alt: 6977770437043) RoHS : Compliant | 54 | |||
UA741CDT![]() | STMicroelectronics | OP Amp Single GP 22V 8Pin SO N TR (Alt: UA741CDT) RoHS : Compliant | 0 | |||
| PA.740.A | Taoglas Antenna Solutions | Wideband Ceramic Antenna for 5G4G Bands (Alt: PA.740.A) RoHS : Compliant | 0 | |||
TDA7498MVTR![]() | STMicroelectronics | Audio Amp Speaker 1CH Mono 100W ClassD 36Pin PowerSSO EP TR (Alt: TDA7498MVTR) RoHS : Compliant | 0 | |||
TDA749313TR![]() | STMicroelectronics | Audio Amp Speaker 2CH Stereo 3W ClassD 24Pin HTSSOP EP TR (Alt: TDA749313TR) RoHS : Compliant | 0 | |||
TDA7492P13TR![]() | STMicroelectronics | Audio Amp Speaker 2CH Stereo 25W ClassD 36Pin PowerSSO EP TR (Alt: TDA7492P13TR) RoHS : Compliant | 0 | |||
TDA7491P13TR![]() | STMicroelectronics | Audio Amp Speaker 2CH Stereo 10W ClassD 36Pin PowerSSO EP TR (Alt: TDA7491P13TR) RoHS : Compliant | 0 | |||
| D3172MMA7455L | NXP Semiconductors | Development Kit For ZSTAR3 Accelerometer (Alt: D3172MMA7455L) RoHS : Compliant | 0 | |||
TDA7492MV13TR![]() | STMicroelectronics | Audio Amp Speaker 1CH Mono 50W ClassD 36Pin PowerSSO TR (Alt: TDA7492MV13TR) RoHS : Compliant | 0 | |||
| TDA7491HVU13TR | STMicroelectronics | (Alt: TDA7491HVU13TR) RoHS : Compliant | 0 | |||
| MA741.B.BI.001 | Taoglas Antenna Solutions | External Antenna Dome Multi Band 600GHz 6GHz Linear Screw Mount (Alt: MA741.B.BI.001) RoHS : Compliant | 0 | |||
| SIRA74DP-T1-GE3 | Vishay Intertechnologies | (Alt: SIRA74DP-T1-GE3) RoHS : Compliant | 0 | |||
| SIJA74DP-T1-GE3 | Vishay Intertechnologies | (Alt: SIJA74DP-T1-GE3) RoHS : Compliant | 0 | |||
![]() Flip Electronics | R7FA2E2A74CNJ#AA1 | Renesas Electronics Corporation | Stock RoHS : Compliant | 179 | ||
![]() Master Electronics | DRA74-101-R | Eaton Bussmann | WireWound SMD Inductor w/ Ferrite Core; 100 uH +/-20%WireWound 929mA Idc RoHS : Compliant |
| 1,100 | |
| DRA74-220-R | Eaton Bussmann | WireWound SMD Inductor w/ Ferrite Core 22 uH +/-20% WireWound 1.96A Idc RoHS : Compliant |
| 1,045 | ||
| CA7-43-00-24Z | Sprecher + Schuh | Electromechanical Contactor - 43A - 24VAC - DIN Rail. RoHS : Not Compliant |
| 30 | ||
| 9PA74 | Honeywell Sensing and Control | Switch Access Limit Switch Packet RoHS : Compliant |
| 5 | ||
| K61A741 | TE Connectivity | Electromechanical Relay 12VDC 30Ohm 10A SPST-NO Threaded Mount Voltage Relay RoHS : Not Compliant |
| 4 | ||
| 234A742-3-0 | TE Connectivity | Heat Shrink Molded Boot MOQ Reduction RoHS : Compliant |
| 0 | ||
| DSC6083HI1A-745K000T | Microchip Technology Inc | MEMS OSCILLATOR ULTRA LOW RoHS : Compliant |
| 0 | ||
| GA10K3A748I | TE Connectivity | DISC-DISCRETE MOQ Reduction RoHS : Compliant |
| 0 | ||
| LTILA74-1S-WH-WH-FW/12V | Carling Technologies | LTIG H & L-SERIES RKR SW RoHS : Compliant |
| 0 | ||
| CA744/4 | Altech Corporation | Single Level Terminal Blocks Insulated Internal Jumper CTS10U 4 pole | Altech Corp CA744/4 RoHS : Compliant |
| 0 | ||
| DMC-MD-0644-01A-7400 | TE Connectivity | DMC-MD 0644-01A 7400 MOQ Reduction RoHS : Compliant |
| 0 | ||
| GA8K3A741I | TE Connectivity | DISC- +- 5.5% 35 C RoHS : Compliant |
| 0 | ||
| CA743/3 | Altech Corporation | Screw Clamp Terminal Block Accessories Internal Jumper Assemblies RoHS : Compliant |
| 0 | ||
| DRA74-471-R | Eaton Bussmann | 470 H Shielded Wirewound Inductor 383 mA 1.93Oh RoHS : Compliant |
| 0 | ||
| 2GA74-B8 | Carling Technologies | G-SERIES TOGGLE SWITCH RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3FCA748-1M | Pasternack Enterprises | Key Specifications, Mode: Multimode, Multimode Class: OM4, Fiber Diameter: 50/125, Connector 1 Series: MPO (w/ pins), Connector 1 Polish Type: UPC, Connector 2 Series: LC, Connector 2 Polish Type: UPC, Jacket Burn Rating: LSZH, Cable Diameter: 3 mm, Max Crush Resistance, Short Term (N/100mm): 500, Max Crush Resistance, Long Term (N/100mm): 100, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. Type B MPO Male (w/pins) to LC/UPC Clipped fan-out, 2.0mm Diameter, 24 Fiber, Multimode OM4 40/100G, 50/125, LSZH Jacket-1M. Pasternack’s PE3FCA748-1M fiber optic fan-out cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 1-meter long fan-out cable assembly is equipped with MPO (w/ pins)/UPC to LC/UPC duplex clip connectors. Our fiber optic cable has an LSZH (low smoke zero halogen) rated PE jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. The fiber optic jumper from Pasternack is suitable for applications such as data center backbone and switch-to-server connectivity, high-density fiber patching and cross-connect systems, 40G and 100G single mode network deployments, MPO trunk to LC equipment breakout applications and enterprise and telecommunications fiber distribution. This fan-out cable has a multimode OM4 fiber and comes with a breakout diameter of 2 mm. With the flexibility of custom lengths, the PE3FCA748-1M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this 24-strand fiber optic fan-out cord can be found on its downloadable PDF datasheet. This PE3FCA748-1M fiber optic cable with a 3 mm cable diameter and 23 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of MPO (w/ pins)/UPC to LC/UPC fiber optic fan-out cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM4 multimode fiber optic cable that meets your requirements. |
| 0 | |
| PE3FCA742-10M | Pasternack Enterprises | Key Specifications, Mode: Multimode, Multimode Class: OM3, Fiber Diameter: 50/125, Connector 1 Series: MPO (w/ pins), Connector 1 Polish Type: UPC, Connector 2 Series: LC, Connector 2 Polish Type: UPC, Jacket Burn Rating: LSZH, Cable Diameter: 3 mm, Max Crush Resistance, Short Term (N/100mm): 500, Max Crush Resistance, Long Term (N/100mm): 100, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. Type B MPO Male (w/pins) to LC/UPC Clipped fan-out, 2.0mm Diameter, 12 Fiber, Multimode OM3 10GB 50/125, LSZH Jacket-10M. Pasternack’s PE3FCA742-10M fiber optic fan-out cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 10-meter long fan-out cable assembly is equipped with MPO (w/ pins)/UPC to LC/UPC duplex clip connectors. Our fiber optic cable has an LSZH (low smoke zero halogen) rated PE jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. The fiber optic jumper from Pasternack is suitable for applications such as data center backbone and switch-to-server connectivity, high-density fiber patching and cross-connect systems, 40G and 100G single mode network deployments, MPO trunk to LC equipment breakout applications and enterprise and telecommunications fiber distribution. This fan-out cable has a multimode OM3 fiber and comes with a breakout diameter of 2 mm. With the flexibility of custom lengths, the PE3FCA742-10M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this 12-strand fiber optic fan-out cord can be found on its downloadable PDF datasheet. This PE3FCA742-10M fiber optic cable with a 3 mm cable diameter and 23 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of MPO (w/ pins)/UPC to LC/UPC fiber optic fan-out cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM3 multimode fiber optic cable that meets your requirements. |
| 0 | ||
| PE3FCA743-10M | Pasternack Enterprises | Key Specifications, Mode: Multimode, Multimode Class: OM4, Fiber Diameter: 50/125, Connector 1 Series: MPO (w/ pins), Connector 1 Polish Type: UPC, Connector 2 Series: LC, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNR, Cable Diameter: 3 mm, Max Crush Resistance, Short Term (N/100mm): 500, Max Crush Resistance, Long Term (N/100mm): 100, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. Type B MPO Male (w/pins) to LC/UPC Clipped fan-out, 2.0mm Diameter, 12 Fiber, Multimode OM4 40/100G, 50/125, OFNR Jacket-10M. Pasternack’s PE3FCA743-10M fiber optic fan-out cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 10-meter long fan-out cable assembly is equipped with MPO (w/ pins)/UPC to LC/UPC duplex clip connectors. Our fiber optic cable has a riser (OFNR) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. The fiber optic jumper from Pasternack is suitable for applications such as data center backbone and switch-to-server connectivity, high-density fiber patching and cross-connect systems, 40G and 100G single mode network deployments, MPO trunk to LC equipment breakout applications and enterprise and telecommunications fiber distribution. This fan-out cable has a multimode OM4 fiber and comes with a breakout diameter of 2 mm. With the flexibility of custom lengths, the PE3FCA743-10M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this 12-strand fiber optic fan-out cord can be found on its downloadable PDF datasheet. This PE3FCA743-10M fiber optic cable with a 3 mm cable diameter and 23 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of MPO (w/ pins)/UPC to LC/UPC fiber optic fan-out cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM4 multimode fiber optic cable that meets your requirements. |
| 0 | ||
| PE3FCA745-10M | Pasternack Enterprises | Key Specifications, Mode: Multimode, Multimode Class: OM3, Fiber Diameter: 50/125, Connector 1 Series: MPO (w/ pins), Connector 1 Polish Type: UPC, Connector 2 Series: LC, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNR, Cable Diameter: 3 mm, Max Crush Resistance, Short Term (N/100mm): 500, Max Crush Resistance, Long Term (N/100mm): 100, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. Type B MPO Male (w/pins) to LC/UPC Clipped fan-out, 2.0mm Diameter, 24 Fiber, Multimode OM3 10GB 50/125, OFNR Jacket-10M. Pasternack’s PE3FCA745-10M fiber optic fan-out cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 10-meter long fan-out cable assembly is equipped with MPO (w/ pins)/UPC to LC/UPC duplex clip connectors. Our fiber optic cable has a riser (OFNR) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. The fiber optic jumper from Pasternack is suitable for applications such as ultra-high-density fiber network deployments, large-scale data center backbone connectivity, high-capacity MPO to LC breakout systems, core network and SAN fiber distribution and parallel optics and hyperscale infrastructure applications. This fan-out cable has a multimode OM3 fiber and comes with a breakout diameter of 2 mm. With the flexibility of custom lengths, the PE3FCA745-10M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this 24-strand fiber optic fan-out cord can be found on its downloadable PDF datasheet. This PE3FCA745-10M fiber optic cable with a 3 mm cable diameter and 23 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of MPO (w/ pins)/UPC to LC/UPC fiber optic fan-out cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM3 multimode fiber optic cable that meets your requirements. |
| 0 | ||
| PE3FCA749-5M | Pasternack Enterprises | Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Connector 1 Series: MPO (w/ pins), Connector 1 Polish Type: UPC, Connector 2 Series: LC, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNP, Cable Diameter: 3 mm, Max Crush Resistance, Short Term (N/100mm): 500, Max Crush Resistance, Long Term (N/100mm): 100, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. Type B MPO/UPC Male (w/pins) to LC/UPC Clipped fan-out, 2.0mm Diameter, 8 Fiber, Single Mode OS2, OFNP Jacket-5M. Pasternack’s PE3FCA749-5M fiber optic fan-out cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 5-meter long fan-out cable assembly is equipped with MPO (w/ pins)/UPC to LC/UPC duplex clip connectors. Our fiber optic cable has a plenum (OFNP) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. The fiber optic jumper from Pasternack is suitable for applications such as 40G BiDi and parallel optics connectivity, reduced-fiber-count data center architectures, MPO to LC equipment breakout cabling, high-speed switch and server interconnects and telecom and enterprise fiber routing systems. This fan-out cable has a single mode OS2 fiber and comes with a breakout diameter of 2 mm. With the flexibility of custom lengths, the PE3FCA749-5M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this 8-strand fiber optic fan-out cord can be found on its downloadable PDF datasheet. This PE3FCA749-5M fiber optic cable with a 3 mm cable diameter and 23 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of MPO (w/ pins)/UPC to LC/UPC fiber optic fan-out cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements. |
| 0 | ||
| PE3FCA741-3M | Pasternack Enterprises | Key Specifications, Mode: Multimode, Multimode Class: OM3, Fiber Diameter: 50/125, Connector 1 Series: MPO (w/ pins), Connector 1 Polish Type: UPC, Connector 2 Series: LC, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNR, Cable Diameter: 3 mm, Max Crush Resistance, Short Term (N/100mm): 500, Max Crush Resistance, Long Term (N/100mm): 100, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. Type B MPO Male (w/pins) to LC/UPC Clipped fan-out, 2.0mm Diameter, 12 Fiber, Multimode OM3 10GB 50/125, OFNR Jacket-3M. Pasternack’s PE3FCA741-3M fiber optic fan-out cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 3-meter long fan-out cable assembly is equipped with MPO (w/ pins)/UPC to LC/UPC duplex clip connectors. Our fiber optic cable has a riser (OFNR) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. The fiber optic jumper from Pasternack is suitable for applications such as data center backbone and switch-to-server connectivity, high-density fiber patching and cross-connect systems, 40G and 100G single mode network deployments, MPO trunk to LC equipment breakout applications and enterprise and telecommunications fiber distribution. This fan-out cable has a multimode OM3 fiber and comes with a breakout diameter of 2 mm. With the flexibility of custom lengths, the PE3FCA741-3M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this 12-strand fiber optic fan-out cord can be found on its downloadable PDF datasheet. This PE3FCA741-3M fiber optic cable with a 3 mm cable diameter and 23 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of MPO (w/ pins)/UPC to LC/UPC fiber optic fan-out cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM3 multimode fiber optic cable that meets your requirements. |
| 0 | ||
| PE3FCA740 | Pasternack Enterprises | Key Specifications, Mode: Multimode, Multimode Class: OM4, Fiber Diameter: 50/125, Connector 1 Series: MPO (w/o pins), Connector 1 Polish Type: UPC, Connector 2 Series: LC, Connector 2 Polish Type: UPC, Jacket Burn Rating: LSZH, Cable Diameter: 3 mm, Max Crush Resistance, Short Term (N/100mm): 500, Max Crush Resistance, Long Term (N/100mm): 100, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. Type B MPO Female (w/o pins) to LC/UPC Clipped fan-out, 2.0mm Diameter, 24 Fiber, Multimode OM4 40/100G, 50/125, LSZH Jacket. Pasternack’s PE3FCA740 fiber optic fan-out cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This fan-out cable assembly is equipped with MPO (w/o pins)/UPC to LC/UPC duplex clip connectors. Our fiber optic cable has an LSZH (low smoke zero halogen) rated PE jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. The fiber optic jumper from Pasternack is suitable for applications such as ultra-high-density fiber network deployments, large-scale data center backbone connectivity, high-capacity MPO to LC breakout systems, core network and SAN fiber distribution and parallel optics and hyperscale infrastructure applications. This fan-out cable has a multimode OM4 fiber and comes with a breakout diameter of 2 mm. With the flexibility of custom lengths, the PE3FCA740 fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this 24-strand fiber optic fan-out cord can be found on its downloadable PDF datasheet. This PE3FCA740 fiber optic cable with a 3 mm cable diameter and 23 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of MPO (w/o pins)/UPC to LC/UPC fiber optic fan-out cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM4 multimode fiber optic cable that meets your requirements. | 0 | |||
| PE3FCA745-1M | Pasternack Enterprises | Key Specifications, Mode: Multimode, Multimode Class: OM3, Fiber Diameter: 50/125, Connector 1 Series: MPO (w/ pins), Connector 1 Polish Type: UPC, Connector 2 Series: LC, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNR, Cable Diameter: 3 mm, Max Crush Resistance, Short Term (N/100mm): 500, Max Crush Resistance, Long Term (N/100mm): 100, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. Type B MPO Male (w/pins) to LC/UPC Clipped fan-out, 2.0mm Diameter, 24 Fiber, Multimode OM3 10GB 50/125, OFNR Jacket-1M. Pasternack’s PE3FCA745-1M fiber optic fan-out cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 1-meter long fan-out cable assembly is equipped with MPO (w/ pins)/UPC to LC/UPC duplex clip connectors. Our fiber optic cable has a riser (OFNR) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. The fiber optic jumper from Pasternack is suitable for applications such as ultra-high-density fiber network deployments, large-scale data center backbone connectivity, high-capacity MPO to LC breakout systems, core network and SAN fiber distribution and parallel optics and hyperscale infrastructure applications. This fan-out cable has a multimode OM3 fiber and comes with a breakout diameter of 2 mm. With the flexibility of custom lengths, the PE3FCA745-1M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this 24-strand fiber optic fan-out cord can be found on its downloadable PDF datasheet. This PE3FCA745-1M fiber optic cable with a 3 mm cable diameter and 23 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of MPO (w/ pins)/UPC to LC/UPC fiber optic fan-out cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM3 multimode fiber optic cable that meets your requirements. |
| 0 | ||
| PE3FCA741-10M | Pasternack Enterprises | Key Specifications, Mode: Multimode, Multimode Class: OM3, Fiber Diameter: 50/125, Connector 1 Series: MPO (w/ pins), Connector 1 Polish Type: UPC, Connector 2 Series: LC, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNR, Cable Diameter: 3 mm, Max Crush Resistance, Short Term (N/100mm): 500, Max Crush Resistance, Long Term (N/100mm): 100, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. Type B MPO Male (w/pins) to LC/UPC Clipped fan-out, 2.0mm Diameter, 12 Fiber, Multimode OM3 10GB 50/125, OFNR Jacket-10M. Pasternack’s PE3FCA741-10M fiber optic fan-out cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 10-meter long fan-out cable assembly is equipped with MPO (w/ pins)/UPC to LC/UPC duplex clip connectors. Our fiber optic cable has a riser (OFNR) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. The fiber optic jumper from Pasternack is suitable for applications such as data center backbone and switch-to-server connectivity, high-density fiber patching and cross-connect systems, 40G and 100G single mode network deployments, MPO trunk to LC equipment breakout applications and enterprise and telecommunications fiber distribution. This fan-out cable has a multimode OM3 fiber and comes with a breakout diameter of 2 mm. With the flexibility of custom lengths, the PE3FCA741-10M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this 12-strand fiber optic fan-out cord can be found on its downloadable PDF datasheet. This PE3FCA741-10M fiber optic cable with a 3 mm cable diameter and 23 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of MPO (w/ pins)/UPC to LC/UPC fiber optic fan-out cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM3 multimode fiber optic cable that meets your requirements. |
| 0 | ||
| PE3FCA744 | Pasternack Enterprises | Key Specifications, Mode: Multimode, Multimode Class: OM4, Fiber Diameter: 50/125, Connector 1 Series: MPO (w/ pins), Connector 1 Polish Type: UPC, Connector 2 Series: LC, Connector 2 Polish Type: UPC, Jacket Burn Rating: LSZH, Cable Diameter: 3 mm, Max Crush Resistance, Short Term (N/100mm): 500, Max Crush Resistance, Long Term (N/100mm): 100, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. Type B MPO Male (w/pins) to LC/UPC Clipped fan-out, 2.0mm Diameter, 12 Fiber, Multimode OM4 40/100G, 50/125, LSZH Jacket. Pasternack’s PE3FCA744 fiber optic fan-out cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This fan-out cable assembly is equipped with MPO (w/ pins)/UPC to LC/UPC duplex clip connectors. Our fiber optic cable has an LSZH (low smoke zero halogen) rated PE jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. The fiber optic jumper from Pasternack is suitable for applications such as data center backbone and switch-to-server connectivity, high-density fiber patching and cross-connect systems, 40G and 100G single mode network deployments, MPO trunk to LC equipment breakout applications and enterprise and telecommunications fiber distribution. This fan-out cable has a multimode OM4 fiber and comes with a breakout diameter of 2 mm. With the flexibility of custom lengths, the PE3FCA744 fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this 12-strand fiber optic fan-out cord can be found on its downloadable PDF datasheet. This PE3FCA744 fiber optic cable with a 3 mm cable diameter and 23 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of MPO (w/ pins)/UPC to LC/UPC fiber optic fan-out cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM4 multimode fiber optic cable that meets your requirements. | 0 | |||
| PE3FCA749-3M | Pasternack Enterprises | Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Connector 1 Series: MPO (w/ pins), Connector 1 Polish Type: UPC, Connector 2 Series: LC, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNP, Cable Diameter: 3 mm, Max Crush Resistance, Short Term (N/100mm): 500, Max Crush Resistance, Long Term (N/100mm): 100, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. Type B MPO/UPC Male (w/pins) to LC/UPC Clipped fan-out, 2.0mm Diameter, 8 Fiber, Single Mode OS2, OFNP Jacket-3M. Pasternack’s PE3FCA749-3M fiber optic fan-out cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 3-meter long fan-out cable assembly is equipped with MPO (w/ pins)/UPC to LC/UPC duplex clip connectors. Our fiber optic cable has a plenum (OFNP) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. The fiber optic jumper from Pasternack is suitable for applications such as 40G BiDi and parallel optics connectivity, reduced-fiber-count data center architectures, MPO to LC equipment breakout cabling, high-speed switch and server interconnects and telecom and enterprise fiber routing systems. This fan-out cable has a single mode OS2 fiber and comes with a breakout diameter of 2 mm. With the flexibility of custom lengths, the PE3FCA749-3M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this 8-strand fiber optic fan-out cord can be found on its downloadable PDF datasheet. This PE3FCA749-3M fiber optic cable with a 3 mm cable diameter and 23 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of MPO (w/ pins)/UPC to LC/UPC fiber optic fan-out cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements. |
| 0 | ||
| PE3FCA749-1M | Pasternack Enterprises | Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Connector 1 Series: MPO (w/ pins), Connector 1 Polish Type: UPC, Connector 2 Series: LC, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNP, Cable Diameter: 3 mm, Max Crush Resistance, Short Term (N/100mm): 500, Max Crush Resistance, Long Term (N/100mm): 100, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. Type B MPO/UPC Male (w/pins) to LC/UPC Clipped fan-out, 2.0mm Diameter, 8 Fiber, Single Mode OS2, OFNP Jacket-1M. Pasternack’s PE3FCA749-1M fiber optic fan-out cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 1-meter long fan-out cable assembly is equipped with MPO (w/ pins)/UPC to LC/UPC duplex clip connectors. Our fiber optic cable has a plenum (OFNP) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. The fiber optic jumper from Pasternack is suitable for applications such as 40G BiDi and parallel optics connectivity, reduced-fiber-count data center architectures, MPO to LC equipment breakout cabling, high-speed switch and server interconnects and telecom and enterprise fiber routing systems. This fan-out cable has a single mode OS2 fiber and comes with a breakout diameter of 2 mm. With the flexibility of custom lengths, the PE3FCA749-1M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this 8-strand fiber optic fan-out cord can be found on its downloadable PDF datasheet. This PE3FCA749-1M fiber optic cable with a 3 mm cable diameter and 23 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of MPO (w/ pins)/UPC to LC/UPC fiber optic fan-out cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements. |
| 0 | ||
| PE3FCA745-3M | Pasternack Enterprises | Key Specifications, Mode: Multimode, Multimode Class: OM3, Fiber Diameter: 50/125, Connector 1 Series: MPO (w/ pins), Connector 1 Polish Type: UPC, Connector 2 Series: LC, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNR, Cable Diameter: 3 mm, Max Crush Resistance, Short Term (N/100mm): 500, Max Crush Resistance, Long Term (N/100mm): 100, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. Type B MPO Male (w/pins) to LC/UPC Clipped fan-out, 2.0mm Diameter, 24 Fiber, Multimode OM3 10GB 50/125, OFNR Jacket-3M. Pasternack’s PE3FCA745-3M fiber optic fan-out cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 3-meter long fan-out cable assembly is equipped with MPO (w/ pins)/UPC to LC/UPC duplex clip connectors. Our fiber optic cable has a riser (OFNR) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. The fiber optic jumper from Pasternack is suitable for applications such as ultra-high-density fiber network deployments, large-scale data center backbone connectivity, high-capacity MPO to LC breakout systems, core network and SAN fiber distribution and parallel optics and hyperscale infrastructure applications. This fan-out cable has a multimode OM3 fiber and comes with a breakout diameter of 2 mm. With the flexibility of custom lengths, the PE3FCA745-3M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this 24-strand fiber optic fan-out cord can be found on its downloadable PDF datasheet. This PE3FCA745-3M fiber optic cable with a 3 mm cable diameter and 23 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of MPO (w/ pins)/UPC to LC/UPC fiber optic fan-out cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM3 multimode fiber optic cable that meets your requirements. |
| 0 | ||
| PE3FCA746-5M | Pasternack Enterprises | Key Specifications, Mode: Multimode, Multimode Class: OM3, Fiber Diameter: 50/125, Connector 1 Series: MPO (w/ pins), Connector 1 Polish Type: UPC, Connector 2 Series: LC, Connector 2 Polish Type: UPC, Jacket Burn Rating: LSZH, Cable Diameter: 3 mm, Max Crush Resistance, Short Term (N/100mm): 500, Max Crush Resistance, Long Term (N/100mm): 100, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. Type B MPO Male (w/pins) to LC/UPC Clipped fan-out, 2.0mm Diameter, 24 Fiber, Multimode OM3 10GB 50/125, LSZH Jacket-5M. Pasternack’s PE3FCA746-5M fiber optic fan-out cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 5-meter long fan-out cable assembly is equipped with MPO (w/ pins)/UPC to LC/UPC duplex clip connectors. Our fiber optic cable has an LSZH (low smoke zero halogen) rated PE jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. The fiber optic jumper from Pasternack is suitable for applications such as ultra-high-density fiber network deployments, large-scale data center backbone connectivity, high-capacity MPO to LC breakout systems, core network and SAN fiber distribution and parallel optics and hyperscale infrastructure applications. This fan-out cable has a multimode OM3 fiber and comes with a breakout diameter of 2 mm. With the flexibility of custom lengths, the PE3FCA746-5M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this 24-strand fiber optic fan-out cord can be found on its downloadable PDF datasheet. This PE3FCA746-5M fiber optic cable with a 3 mm cable diameter and 23 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of MPO (w/ pins)/UPC to LC/UPC fiber optic fan-out cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM3 multimode fiber optic cable that meets your requirements. |
| 0 | ||
| PE3FCA748-5M | Pasternack Enterprises | Key Specifications, Mode: Multimode, Multimode Class: OM4, Fiber Diameter: 50/125, Connector 1 Series: MPO (w/ pins), Connector 1 Polish Type: UPC, Connector 2 Series: LC, Connector 2 Polish Type: UPC, Jacket Burn Rating: LSZH, Cable Diameter: 3 mm, Max Crush Resistance, Short Term (N/100mm): 500, Max Crush Resistance, Long Term (N/100mm): 100, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. Type B MPO Male (w/pins) to LC/UPC Clipped fan-out, 2.0mm Diameter, 24 Fiber, Multimode OM4 40/100G, 50/125, LSZH Jacket-5M. Pasternack’s PE3FCA748-5M fiber optic fan-out cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 5-meter long fan-out cable assembly is equipped with MPO (w/ pins)/UPC to LC/UPC duplex clip connectors. Our fiber optic cable has an LSZH (low smoke zero halogen) rated PE jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. The fiber optic jumper from Pasternack is suitable for applications such as data center backbone and switch-to-server connectivity, high-density fiber patching and cross-connect systems, 40G and 100G single mode network deployments, MPO trunk to LC equipment breakout applications and enterprise and telecommunications fiber distribution. This fan-out cable has a multimode OM4 fiber and comes with a breakout diameter of 2 mm. With the flexibility of custom lengths, the PE3FCA748-5M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this 24-strand fiber optic fan-out cord can be found on its downloadable PDF datasheet. This PE3FCA748-5M fiber optic cable with a 3 mm cable diameter and 23 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of MPO (w/ pins)/UPC to LC/UPC fiber optic fan-out cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM4 multimode fiber optic cable that meets your requirements. |
| 0 | ||
![]() Vyrian | UA748IN![]() | STMicroelectronics | Operational Amplifier, 1 Func, 3000uV Offset-Max, BIPolar, PDIP8 RoHS : Compliant | 12,467 | ||
E-TDA7400DTR![]() | STMicroelectronics | Consumer Circuit, PDSO28 | 10,479 | |||
TDA7431![]() | STMicroelectronics | Tone Control Circuit, 2 Channel(s), BICMOS, PDIP42 RoHS : Compliant | 9,635 | |||
UA741CDRE4![]() | Texas Instruments | Operational Amplifier, 1 Func, 7500uV Offset-Max, BIPolar, PDSO8 RoHS : Compliant | 9,566 | |||
UA741IN![]() | STMicroelectronics | Operational Amplifier, 1 Func, 6000uV Offset-Max, BIPolar, PDIP8 RoHS : Compliant | 8,861 | |||
E-TDA7402![]() | STMicroelectronics | Consumer Circuit, PQFP44 RoHS : Compliant | 8,260 | |||
DRA746APGABCQ1![]() | Texas Instruments | Microprocessor Circuit, CMOS, PBGA760 RoHS : Compliant | 7,099 | |||
| DRA746APH1ABCRQ1 | Texas Instruments | 6,403 | ||||
OPA743UA/2K5![]() | Texas Instruments | Operational Amplifier, 1 Func, 7000uV Offset-Max, CMOS, PDSO8 | 5,367 | |||
| UA741MW | Texas Instruments | Operational Amplifier, 1 Func, 6000uV Offset-Max, BIPolar, CDFP14 RoHS : Not Compliant | 5,337 | |||
UA741CDG4![]() | Texas Instruments | Operational Amplifier, 1 Func, 7500uV Offset-Max, BIPolar, PDSO8 RoHS : Compliant | 4,902 | |||
| TDA7494S | STMicroelectronics | Audio Amplifier, 10W, 1 Channel(s), 1 Func, Bipolar, PZFM15 RoHS : Compliant | 4,393 | |||
| PTPS7A7401DSDR | Texas Instruments | Adjustable Positive LDO Regulator, 0.65V Min, 3.6V Max, 0.18V Dropout, PDSO8 RoHS : Not Compliant | 3,900 | |||
| TDA7496SSA | STMicroelectronics | RoHS : Compliant | 3,776 | |||
OPA743PAG4![]() | Texas Instruments | Operational Amplifier, 1 Func, 7000uV Offset-Max, CMOS, PDIP8 RoHS : Compliant | 3,494 | |||
![]() Win Source Electronics | UA741CP![]() | Texas Instruments | IC OPAMP GP 1MHZ 8DIP RoHS : Compliant |
| 48,000 | |
UA741CDT![]() | STMicroelectronics | IC OPAMP GP 1MHZ 8SO RoHS : Compliant |
| 42,080 | ||
TDA7492![]() | STMicroelectronics | IC AMP D STEREO 50W POWERSSO36 RoHS : Compliant |
| 30,000 | ||
| UA741C | STMicroelectronics | GENERAL-PURPOSE SINGLE OP-AMPs |
| 20,000 | ||
| TDA7496 | STMicroelectronics | IC AMP PWR AB 5+5W MULTIWATT15 RoHS : Compliant |
| 13,450 | ||
UA741IDT![]() | STMicroelectronics | IC OPAMP GP 1MHZ 8SO RoHS : Compliant |
| 12,500 | ||
UA741IDR![]() | Texas Instruments |
| 11,470 | |||
| MMA7455LR2 | Nexperia |
| 9,898 | |||
TDA7492P13TR![]() | STMicroelectronics | IC AMP AUD CLASS D BTL PWRSSO36 RoHS : Compliant |
| 5,000 | ||
UA741CDR![]() | Texas Instruments | IC OPAMP GP 1MHZ 8SOIC RoHS : Compliant |
| 5,000 | ||
MMA7455LT![]() | Freescale Semiconductor | Accelerometer Triple ±2g/±4g/±8g 2.8V 14-Pin LGA Tray / ACCELEROMETER 2-8G I2C/SPI 14LGA RoHS : Compliant |
| 3,500 | ||
TDA7492MV13TR![]() | STMicroelectronics | IC AMP AUD CLASS D BTL PWRSSO36 RoHS : Compliant |
| 2,072 | ||
| QPA7489ATR13 | Qorvo | RF Amplifier DC-3000MHz NF 3.2dB P1dB 21.1dBm RoHS : Compliant |
| 1,840 | ||
| SA7454 | Hangzhou Silan Microelectronics CO LTD | 2×6W AUDIO POWER AMPLIFIER RoHS : Compliant |
| 1,000 | ||
TDA7419TR![]() | STMicroelectronics | IC PROCESSOR CAR AUD 3BAND 28SOI RoHS : Compliant |
| 1,000 | ||
![]() Wuhan P&S | UA741CDT![]() | STMicroelectronics | RoHS : Compliant |
| 5,000 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |