| Electronic Components Datasheet Search |
|
9502JS Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() TME | 47950-2011 | Molex | Antenna: communication; Bluetooth,WiFi,ZigBee; 2.6dBi,4.4dBi RoHS : Compliant |
| 93 | |
| 9502 060500 | Belden Inc | Wire; 2x2x24AWG; stranded; Cu; shielded,Al-PET foil; PVC; chrome |
| 39 | ||
| 95023 | Goobay | Cable: SATA; SATA L-Type plug,both sides; 0.7m; yellow |
| 5 | ||
| 95 02 21 | KNIPEX | Cutters; for cutting cable trays,for cutting of plastics |
| 4 | ||
| 16 95 02 SB | KNIPEX | Stripping tool; Øcable: 8÷13mm; Wire: round; 135mm |
| 3 | ||
| 1300950245 | Molex | Cable gland: cable |
| 1 | ||
| 9502 | Keystone Electronics Corp | Screw; UNC 4-40; UNC4-40x12.7; Head: countersunk; slotted; steel |
| 0 | ||
| 1950220000 | Weidmüller Interface GmbH & Co. KG | Connector: pluggable terminal block; female; power supply; 18A RoHS : Compliant |
| 0 | ||
| 51-195.025D2 | EAO AG | Switch: rotary with key; 16mm; Stabl.pos: 2; NC + NO; 51; Pos: 2 RoHS : Compliant |
| 0 | ||
| 51-195.025D2F | EAO AG | Switch: rotary with key; Stabl.pos: 2; NC + NO; 51; Pos: 2; flat RoHS : Compliant |
| 0 | ||
| 1749502 | Phoenix Contact | Connector: pluggable terminal block; power supply; COMBICON S RoHS : Compliant |
| 0 | ||
| 395-020-520-202 | EDAC Inc | Connector: card edge; socket; PIN: 20; flange (2 holes); THT RoHS : Compliant |
| 0 | ||
| 539950-2 | TE Connectivity | Crimping jaws; steel RoHS : Not Compliant |
| 0 | ||
| 95024 | Goobay | Cable: SATA; SATA L-Type angled plug,SATA L-Type plug; 1m |
| 0 | ||
| 9502580000 | Weidmüller Interface GmbH & Co. KG | 9502580000 RoHS : Compliant |
| 0 | ||
![]() Avnet Americas | M95020-WDW6TP![]() | STMicroelectronics | EEPROM Serial-SPI 2K-bit 256 x 8 3.3V/5V 8-Pin TSSOP T/R - Tape and Reel (Alt: M95020-WDW6TP) RoHS : Compliant |
| 228,000 | |
| 39502-1004 | Molex | Pin Header, 4 Contacts, 1 Row, 3.5 mm, Right Angle, 39502 Series, Shrouded, Wire-to-Board, 8 A - Bulk (Alt: 0395021004) RoHS : Compliant |
| 27,950 | ||
| 39502-1002 | Molex | Pin Header, 2 Contacts, 1 Row, 3.5 mm, Right Angle, 39502 Series, Shrouded, Wire-to-Board, 8 A - Bulk (Alt: 0395021002) RoHS : Compliant |
| 9,906 | ||
| S99-50239 | Infineon Technologies AG | S99-50239 - Bulk (Alt: S99-50239) RoHS : Compliant |
| 5,600 | ||
| 39502-1006 | Molex | - Bulk (Alt: 0395021006) RoHS : Compliant |
| 2,402 | ||
| MIC29502WU-TR | Microchip Technology Inc | Adjustable LDO Voltage Regulator, 2.3V to 26V, 370mV Drop, 1.25V to 25V/5A Out, TO-263-5 - Tape and Reel (Alt: MIC29502WU-TR) RoHS : Compliant |
| 2,250 | ||
PCA9502BS,128![]() | NXP Semiconductors | I/O Expander 24-Pin HVQFN EP T/R - Tape and Reel (Alt: PCA9502BS,128) RoHS : Compliant |
| 1,500 | ||
| MIC29502WU | Microchip Technology Inc | - Rail/Tube (Alt: MIC29502WU) RoHS : Compliant |
| 126 | ||
| MIC29502WT | Microchip Technology Inc | - Rail/Tube (Alt: MIC29502WT) RoHS : Compliant |
| 100 | ||
| MIC69502WR | Microchip Technology Inc | - Rail/Tube (Alt: MIC69502WR) RoHS : Compliant |
| 44 | ||
| 1950-20-2F | Omega Engineering | - Bulk (Alt: 1950-20-2F) RoHS : Compliant |
| 10 | ||
| 39502-1005 | Molex | Pin Header, 5 Contacts, 1 Row, 3.5 mm, Right Angle, 39502 Series, Shrouded, Wire-to-Board, 8 A - Bulk (Alt: 0395021005) RoHS : Compliant |
| 0 | ||
| ZW-10-14-G-D-950-250 | Samtec Inc | Board Stackers & Spacers, Pin Header, 24.13 mm, 20 Contacts, Solder, 2 Rows, 2.54 mm, ZW Series - Bulk (Alt: ZW-10-14-G-D-950-250) RoHS : Compliant |
| 0 | ||
| SST-20-WS50-B2-F9502 | Luminus Devices | - Tape and Reel (Alt: SST-20-WS50-B2-F9502) RoHS : Compliant |
| 0 | ||
| 10-427950-253 | Amphenol Corporation | - Bulk (Alt: 10-427950-253) RoHS : Not Compliant |
| 0 | ||
![]() Newark | 39502-1005 | Molex | Terminal Block, Euro, 5Pos, 3.5Mm; |Molex 39502-1005 RoHS : Compliant |
| 1,693 | |
| 5189502 | YAGEO Nexenos | Rtd Sensor, Pt100, -70 To 500°C; |Yageo Nexensos 5189502 RoHS : Not Compliant |
| 1,000 | ||
| 5189502 | YAGEO Nexenos | Rtd Sensor, Pt100, -70 To 500Deg C; |Yageo Nexensos 5189502 RoHS : Compliant |
| 999 | ||
| ZW-03-19-L-D-950-270 | Samtec Inc | Conn Stack Brd, 2.54Mm, 6Pos, Hdr; |Samtec, Inc. ZW-03-19-L-D-950-270 RoHS : Compliant |
| 309 | ||
| 9502 | Belden Inc | Cable, 9502, 2Pair, Per M; |Belden 9502 RoHS : Compliant |
| 274 | ||
| 29502 010100 | Belden Inc | Cable, Variable Frequency Drive Vfd, Shi; |Belden 29502 010100 RoHS : Compliant |
| 100 | ||
| 39502-1010 | Molex | Terminal Block, R/A Hdr, 10P, 3.5Mm, Th; |Molex 39502-1010 RoHS : Compliant |
| 75 | ||
| ZW-36-14-G-S-950-240 | Samtec Inc | Conn Stack Brd, 2.54Mm, 36Pos, Hdr; |Samtec, Inc. ZW-36-14-G-S-950-240 RoHS : Compliant |
| 66 | ||
| 39502-1004 | Molex | Terminal Block, Header, 4Pos, Th; |Molex 39502-1004 RoHS : Compliant |
| 43 | ||
| 395-020-525-201 | EDAC Inc | Card Edge Conn, Dual, 20Pos, Solder; Card Edge Connector Type:Dual Side; Card Thickness:1.57Mm; No. Of Contacts:20 Contacts; Connector Mounting:Through Hole Mount; Connector Body Orientation:Straight; Contact Termination Type:Solder Rohs Compliant: Yes RoHS : Compliant |
| 25 | ||
| 39502-1003 | Molex | Terminal Block, pcb Mount, recept,3 Contacts, pin Rohs Compliant: Yes |Molex 39502-1003 RoHS : Compliant |
| 18 | ||
| JR9502/10M | Pro-Signal | Lead, Hq 2X Phono Plg-Plg, 10M; |Pro Signal JR9502/10M RoHS : Not Compliant |
| 2 | ||
| LED195-02WH-SB-01 | Moflash Signaling Ltd | Beacon, Continuous/Flashing, 30V, Amber; |Moflash Signalling LED195-02WH-SB-01 RoHS : Compliant |
| 2 | ||
| 9502 | Keystone Electronics Corp | Screw 4-40 X 1/2 Steel; |Keystone 9502 RoHS : Compliant |
| 0 | ||
| 9502 | Abbatron | Conn Accessory, Insulator; |Abbatron Hh Smith 9502 RoHS : Compliant |
| 0 | ||
![]() Analog Devices Inc | MAX9502GAALT+T | Analog Devices Inc | 2.5V Video Amplifier with Reco RoHS : Compliant |
| 100,000 | |
ADA4950-2YCPZ-R7![]() | Analog Devices Inc | Fixed Gain 1,2&3 Diff ADC Driv RoHS : Compliant |
| 2,022 | ||
| MAX9502GAALT+ | Analog Devices Inc | 2.5V Video Amplifier with Reco RoHS : Compliant | 1,904 | |||
| ADA4950-2YCP-EBZ | Analog Devices Inc | ADA4950-2YCP-EBZ_A02287_EB-D24 RoHS : Compliant |
| 1 | ||
| MAX9502GAAXK+ | Analog Devices Inc | 2.5V Video Amplifier with Reco RoHS : Compliant | 0 | |||
| MAX9502GAAXK+T | Analog Devices Inc | 2.5V Video Amplifier with Reco RoHS : Compliant |
| 0 | ||
| MAX9502GEXK+T | Analog Devices Inc | 2.5V Video Amplifier with Reco RoHS : Compliant |
| 0 | ||
ADA4950-2YCPZ-RL![]() | Analog Devices Inc | Fixed Gain 1,2&3 Diff ADC Driv RoHS : Compliant |
| 0 | ||
| MAX9502GEXK+ | Analog Devices Inc | 2.5V Video Amplifier with Reco RoHS : Compliant | 0 | |||
![]() RS | MOX95021004FVE | Ohmite Mfg Co | RESISTOR, METAL OXIDE, RES 1 MEGOHMS, PWR-RTG 13.5 W, TOL 1%, AXIAL, SILICONE RoHS : Compliant |
| 237 | |
| ICN2P15TLEDN35M (913701269502) | Advance by Signify | TLED DRIVER, ICN2P15TLEDN, LED 2 LAMP TLED DRIVER 13W T8 120-277 VOLT |
| 21 | ||
| 1950-20-2F | Dwyer Instruments Inc | DIFFERENTIAL PRESSURE SWITCH, EXPLOSION PROOF, DEADBAND 0.99-4.9 KPA, 1950 SERIE |
| 14 | ||
| 51-495.022D | EAO AG | KEYLOCK SWITCH,2 POSITIONS,1NC+1NO, REST/MOM, KEY REMOVE A,5A,250VAC, SOLDER RoHS : Compliant |
| 4 | ||
| 21349700495020 | OMRON Industrial Automation | NXR POWER CABLE 2 M STRAIGHT SINGLE |
| 3 | ||
| 99502H (PER.99502H-2RLDF2) | PEER Bearing Company | DEEP GROOVE BALL BEARING, ID 5/8IN, OD 1-3/8IN, STEEL |
| 3 | ||
| 7719502 | RS Pro | RS HIGH POWER 80W IRON, 230V, UK |
| 2 | ||
| FSV 4.4-0.5/18.25 (U9502-1) | TURCK Inc | M SERIES CONNECTOR, U9502-1 |
| 2 | ||
| 4950 2 IN X 36 YD (21200633836) | 3M | VHB TAPE 4950, WHITE, 2 IN X 36 YD, 45 MIL |
| 2 | ||
| 9502 060500 | Belden Inc | MULTICONDUCTOR CABLE, 2PR, 24AWG, 7X32, TC, PVC INS, FOIL, CHROME PVC JKT, CMG |
| 1 | ||
| 99502H-C3 (PER.99502H-2RLDC3) | PEER Bearing Company | RADIAL BALL BEARING, ID 5/8IN, OD 1-3/8 IN, W 7/16 IN, STEEL |
| 1 | ||
| 9502 | Olympic Wire & Cable Corp | CABLE, 4PR, 24AWG, 7X32, TC, FEP INS, FOIL, WHITE LS PVC JKT, CMP |
| 0 | ||
| 9502 | HH Smith | INSULATOR; HV; CONICAL; 1 9/16" H; 8-32 SCREW SIZE; STEATITE; 5 KV |
| 0 | ||
| 9502 | Olympic Wire & Cable Corp | CABLE, 4PR, 24AWG, 7X32, TC, FEP INS, FOIL, WHITE LS PVC JKT, CMP |
| 0 | ||
| 9502 | Keystone Electronics Corp | SCREW, FLAT HEAD, SLOTTED, 4-40 THREAD, .500 LENGTH, .210 OD, STEEL/ZINC |
| 0 | ||
![]() STMicroelectronics | M95020-DRMF3TG/K | STMicroelectronics | Automotive 2-Kbit SPI bus EEPROM with high-speed clock RoHS : Compliant |
| 12,210 | |
M95020-WMN6TP![]() | STMicroelectronics | 2 Kbit SPI bus EEPROM with high-speed clock RoHS : Compliant |
| 6,546 | ||
M95020-RMN6TP![]() | STMicroelectronics | 1 Kbit SPI bus EEPROM with high-speed clock RoHS : Compliant |
| 4,814 | ||
| M95020-DRMN3TP/K | STMicroelectronics | Automotive 2-Kbit SPI bus EEPROM with high-speed clock RoHS : Compliant |
| 3,809 | ||
| M95020-DRDW3TP/K | STMicroelectronics | Automotive 2-Kbit SPI bus EEPROM with high-speed clock RoHS : Compliant |
| 3,178 | ||
M95020-RDW6TP![]() | STMicroelectronics | 1 Kbit SPI bus EEPROM with high-speed clock RoHS : Compliant |
| 0 | ||
M95020-WDW6TP![]() | STMicroelectronics | 2 Kbit SPI bus EEPROM with high-speed clock RoHS : Compliant |
| 0 | ||
![]() Microchip Technology Inc | MCP9502PT-095E/OT | Microchip Technology Inc | Factory programmed temperature switch, active high, push, SOT-23, Projected EOL: 2035-12-20 RoHS : Compliant |
| 24,000 | |
| MCP9502PT-025E/OT | Microchip Technology Inc | Factory programmed temperature switch, active high, push, SOT-23, Projected EOL: 2035-12-20 RoHS : Compliant |
| 23,970 | ||
| MCP9502PT-035E/OT | Microchip Technology Inc | Factory programmed temperature switch, active high, push, SOT-23, Projected EOL: 2035-12-20 RoHS : Compliant |
| 23,925 | ||
| MCP9502PT-125E/OT | Microchip Technology Inc | Factory programmed temperature switch, active high, push, SOT-23, Projected EOL: 2035-12-20 RoHS : Compliant |
| 23,000 | ||
| MCP9502PT-085E/OT | Microchip Technology Inc | Factory programmed temperature switch, active high, push, SOT-23, Projected EOL: 2035-12-20 RoHS : Compliant |
| 19,350 | ||
| MCP9502PT-105E/OT | Microchip Technology Inc | Factory programmed temperature switch, active high, push, SOT-23, Projected EOL: 2035-12-20 RoHS : Compliant |
| 12,000 | ||
| MCP9502PT-065E/OT | Microchip Technology Inc | Factory programmed temperature switch, active high, push, SOT-23, Projected EOL: 2035-12-20 RoHS : Compliant |
| 11,730 | ||
| MIC29502WT | Microchip Technology Inc | 5.0A LDO Adj. + Shutdown, TO-220, Projected EOL: 2036-07-29 RoHS : Compliant |
| 750 | ||
MIC69502WR-TR![]() | Microchip Technology Inc | 5A Low VIN LDO Regulator with 0.5Vref, SPAK, Projected EOL: 2036-03-19 RoHS : Compliant |
| 322 | ||
| MIC69502WR | Microchip Technology Inc | 5A Low VIN LDO Regulator with 0.5Vref, SPAK, Projected EOL: 2036-02-12 RoHS : Compliant |
| 144 | ||
| MIC29502CYW | Microchip Technology Inc | 5.0A LDO Adj. + Shutdown, WAFER, Projected EOL: 2026-11-28 - Contact for Pricing RoHS : Compliant | 0 | |||
| MIC69502CYW | Microchip Technology Inc | 5A Low VIN LDO Regulator with 0.5Vref, WAFER, Projected EOL: 2026-11-28 - Contact for Pricing RoHS : Compliant | 0 | |||
| 093-55595-02 | Microchip Technology Inc | MD LC03638 03-26 WIRE WRAP PANEL INSTALLATION KIT E THRU H, Projected EOL: 2026-05-03 - Contact for Pricing RoHS : Compliant | 0 | |||
| MCP9502PT-005E/OT | Microchip Technology Inc | Factory programmed temperature switch, active high, push, SOT-23, Projected EOL: 2035-12-20 RoHS : Compliant |
| 0 | ||
| MCP9502PT-015E/OT | Microchip Technology Inc | Factory programmed temperature switch, active high, push, SOT-23, Projected EOL: 2035-12-20 RoHS : Compliant |
| 0 | ||
![]() Bisco Industries | 15950250 | WASHERS | 735 | |||
| 9502 | MISCELLANEOUS | 100 | ||||
| 09-9502-2-03 | Staffall | 97 | ||||
| N0299-50 2-045 | O-RINGS | 61 | ||||
| 500K1950-2 | WASHERS | 50 | ||||
| 051-051-9502229 | ITT Interconnect Solutions | 24 | ||||
| 1950-2520-N | RAF Electronic Hardware | 22 | ||||
| C9502-06-5 | RIVETS | 11 | ||||
| C7950-20D | Accuride International | 6 | ||||
| 218-089502 | Acme Industrial Company | 5 | ||||
| 950-221909 | Vero Technologies | 5 | ||||
| 217-079502K | Acme Industrial Company | 4 | ||||
| 1950-20-2F | Dwyer Instruments Inc | 4 | ||||
| 9502 | HH Smith | 1 | ||||
| 950-202791 | Vero Technologies | 1 | ||||
![]() Rochester Electronics | PCA9502BS,128![]() | NXP Semiconductors | IC I²C, SPI 8 I/O 400kHz 3V - 3.6V 24-QFN T/R RoHS : Compliant |
| 1,270 | |
| S99-50272 | Infineon Technologies AG | IC MEMORY 56-SOP Tray RoHS : Compliant |
| 119 | ||
| S99-50299 | Infineon Technologies AG | Flash Memories RoHS : Compliant | 39,828 | |||
| S99-50271 | Infineon Technologies AG | IC MEMORY 56-SOP Tray RoHS : Compliant |
| 262 | ||
AD9502CM![]() | Analog Devices Inc | Consumer Circuit, Bipolar, MDIP40 RoHS : Not Compliant |
| 5 | ||
| 5962-8950201GC | Harris Semiconductor | Op Amp Standard 50MHz TO99-8 RoHS : Compliant |
| 105 | ||
5962-89502012A![]() | Intersil Corporation | Op Amp Standard 50MHz 20-LCC RoHS : Not Compliant |
| 289 | ||
MAX9502GELT+T![]() | Maxim Integrated Products | Video Amplifier Single-Ended 6-SON T/R RoHS : Compliant |
| 40,000 | ||
MAX9502GEXK+T![]() | Maxim Integrated Products | Video Amplifier, 1 Channel(s), 1 Func, BICMOS, PDSO5 RoHS : Compliant |
| 22,262 | ||
MAX9502MELT+![]() | Maxim Integrated Products | Video Amplifier Single-Ended 6-SON RoHS : Compliant |
| 855 | ||
MAX9502MELT+T![]() | Maxim Integrated Products | Video Amplifier Single-Ended 6-SON T/R RoHS : Compliant |
| 30,000 | ||
| MAX9502MEXK | Maxim Integrated Products | Video Amplifier Single-Ended SOT-353 T/R RoHS : Not Compliant |
| 1,771 | ||
| MAX9502MEXK+ | Maxim Integrated Products | Video Amplifier Single-Ended SOT-353 RoHS : Compliant |
| 5,932 | ||
MAX9502MEXK+T![]() | Maxim Integrated Products | Video Amplifier Single-Ended SOT-353 T/R RoHS : Compliant |
| 40,000 | ||
| MIC29502WT L2 | Micrel Inc | IC VOLT REG Adjustable 1 REG 1.25V 5A TO-220-5 Tube RoHS : Compliant |
| 30 | ||
![]() Sager | ZW-10-14-G-D-950-250 | Samtec Inc | Board to Board & Mezzanine Connectors Flexible Board Stacking Header, 0.100 Pitch RoHS : Compliant |
| 179 | |
| 9502 | Keystone Electronics Corp | Screws & Fasteners 1/2 4-40 STEEL FLAT |
| 0 | ||
| 1-1705950-2 | TE Connectivity | Modular Connectors / Ethernet Connectors SE 6/4 Gold flash RoHS : Compliant |
| 0 | ||
| TW-14-06-L-D-335-095-027 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| 1300950295 | Molex | Cable Glands, Strain Reliefs & Cord Grips MULTI-WEAVE WIRE MESH PULL GRP | 0 | |||
| 0195021022 | Molex | Molex | 0 | |||
| 0395021518 | Molex | Pluggable Terminal Blocks 3.5MM EURO HEADER RA BLK AU 18CKT | 0 | |||
| 0395026018 | Molex | Pluggable Terminal Blocks 3.5MM EURO HEADER RA GRN 18CKT |
| 0 | ||
| 0395026513 | Molex | Pluggable Terminal Blocks 3.5MM EURO HEADER RA GRN AU 13CKT | 0 | |||
| 21349700495020 | ARATAS Americas | NXR POWER CABLE 2M SINGLE STRA |
| 0 | ||
| 195023 | C&K Switches | Littelfuse | 0 | |||
| AP17-1-59-502 | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
| MIT-095-02-L-D-K | Samtec Inc | Board to Board & Mezzanine Connectors 0.635 mm Mixed Technology High-Speed Terminal Strip RoHS : Compliant | 0 | |||
| 1300950229 | Molex | Cable Glands, Strain Reliefs & Cord Grips HVY DTY WIRE MESH SLACK GRIP |
| 0 | ||
| 0039295023 | Molex | Headers & Wire Housings MINI-FIT JR HDR 02P RA 94V-2 RoHS : Compliant |
| 0 | ||
![]() Ameya Holding Limited | M95020-WMN6TP![]() | STMicroelectronics | M95020 Series 2 Kb (256 x 8) 5.5 V Serial SPI Bus EEPROM with High-Speed Clock RoHS : Compliant | 5,080 | ||
PCA9502BS,128![]() | NXP Semiconductors | PCA9502 Series 8-Bit I/O Expander w/ I2C-bus/SPI Interface - HVQFN-24 RoHS : Compliant | 18 | |||
![]() ComSIT USA | M95020WMN6TP | STMicroelectronics | 2 KBIT SERIAL SPI BUS EEPROM WITH HIGH-SPEED CLOCK EEPROM, 256X8, Serial, CMOS, PDSO8 RoHS : Compliant | 205,000 | ||
| 0695020PXP | Littelfuse Inc | Fuse 20A Slow Blow RoHS : Compliant | 70,000 | |||
| M95020WMN6P | STMicroelectronics | 2 KBIT SERIAL SPI BUS EEPROM WITH HIGH-SPEED CLOCK EEPROM, 256X8, Serial, CMOS, PDSO8 RoHS : Compliant | 16,324 | |||
ST95022M3TR![]() | STMicroelectronics | 2 KBIT SERIAL SPI EEPROM WITH HIGH SPEED CLOCK EEPROM, 256X8, Serial, CMOS, PDSO8 RoHS : Not Compliant | 12,500 | |||
| M95020WDW6TP | STMicroelectronics | 4 KBIT SERIAL SPI BUS EEPROM WITH HIGH-SPEED CLOCK EEPROM, 256X8, Serial, CMOS, PDSO8 RoHS : Compliant | 8,000 | |||
| M95020RDW6TP | STMicroelectronics | 4 KBIT SERIAL SPI BUS EEPROM WITH HIGH-SPEED CLOCK EEPROM, 256X8, Serial, CMOS, PDSO8 RoHS : Compliant | 8,000 | |||
| 0895020Z | Littelfuse Inc | LOW PROFILE JCASE FUSE RATED 58V Electric Fuse, 20A, 58VDC, 1000A (IR), Inline/holder RoHS : Compliant | 3,000 | |||
| AKZ9502508 | ptr | Electronic Component RoHS : Compliant | 394 | |||
| STLZ9502G508VGREEN | PTR Hartmann GmbH | Terminal Block Header and Receptacle Header, Male Pins, Shrouded (4 Side) 2 POS Solder Through Hole RoHS : Compliant | 200 | |||
| SPX29502T5L | Sipex Corporation | 5A LOW DROPOUT VOLTAGE REGULATOR ADJUSTABLE OUTPUT, FAST RESPONSE TIME Adjustable Positive LDO Regulator, 1.24V Min, 16V Max, 0.6V Dropout, BIPolar, PSSO5 RoHS : Compliant | 50 | |||
| AMT9502 | amt | Electronic Component RoHS : Compliant | 13 | |||
| BV03950290L | era | Electronic Component RoHS : Compliant | 10 | |||
MIC29502BU![]() | Micrel Inc | HIGH-CURRENT LOW-DROPOUT REGULATOR Adjustable Positive LDO Regulator, 1.25V Min, 25V Max, 0.6V Dropout, BIPolar, PSSO5 RoHS : Not Compliant | 3 | |||
![]() Interstate Connecting Components | 9502-13-0-0 | Amphenol Positronic | Tools |
| 7 | |
| 1-1705950-2 | TE Connectivity | Modular Jack SE 6/4 Gold flash RoHS : Compliant |
| 0 | ||
| 1-1879502-5 | TE Connectivity | CRGH2512 5% 51K 2W RoHS : Compliant |
| 0 | ||
| 115395-0212 | ITT Interconnect Solutions | RoHS : Not Compliant |
| 0 | ||
| 6-1879502-8 | TE Connectivity | CRGH2512 5% 8M2 2W RoHS : Compliant |
| 0 | ||
| 72309-5023BPLF | Amphenol FCi | USB2.0 DOUBLE DECK RECP-72309- | 0 | |||
| 4-1879502-9 | TE Connectivity | CRGH2512 5% 1M3 2W RoHS : Compliant |
| 0 | ||
| 2-1879502-3 | TE Connectivity | CRGH2512 5% 110K 2W RoHS : Compliant |
| 0 | ||
| 249-8609-502 | ITT Interconnect Solutions | 2498609502 | 0 | |||
| 115395-0228 | ITT Interconnect Solutions | KPSE1E22-21P-DZ | 0 | |||
| 10-584950-27P | Amphenol Industrial Operations |
| 0 | |||
| 6-1879502-7 | TE Connectivity | CRGH2512 5% 7M5 2W RoHS : Compliant |
| 0 | ||
| HSTA2F19.1/9.502 | Amphenol Industrial Operations | Heat Shrink Tubing | 0 | |||
| 1-1879502-4 | TE Connectivity | CRGH2512 5% 47K 2W RoHS : Compliant |
| 0 | ||
| 10-584950-29P | Amphenol Industrial Operations |
| 0 | |||
![]() NexGen Digital | 83000-9502 | Molex | 1,500 | |||
![]() PEI Genesis | 359-8430-09-502 | Dialight | RoHS : Compliant |
| 2,199 | |
| 10-584895-02S | Amphenol Corporation |
| 4 | |||
| 9502-19-0-0 | Amphenol Positronic |
| 2 | |||
| CF-195025-139 | Amphenol Corporation |
| 0 | |||
| M28859/5-02 | Amphenol Corporation |
| 0 | |||
| C10-731950-211 | Amphenol Corporation | RoHS : Compliant |
| 0 | ||
| C10-731950-210 | Amphenol Corporation |
| 0 | |||
| CF-195025-199 | Amphenol Corporation |
| 0 | |||
![]() Powell Electronics | 1-1879502-4 | TE Connectivity | Resistors RoHS : Compliant |
| 42,240 | |
| 3-1879502-6 | TE Connectivity | Resistors RoHS : Compliant |
| 3,907 | ||
| 10-584950-29P | Amphenol Corporation | CONNECTOR |
| 1,688 | ||
| 10-584950-27P | Amphenol Corporation | CONNECTOR |
| 870 | ||
| RM452-300-321-9502 | AirBorn a molex company | PCB Connector RoHS : Compliant |
| 260 | ||
| HW-08-14-G-D-950-250 | Samtec Inc | High Temperature Flexible Board Stacking RoHS : Compliant |
| 212 | ||
| ZW-03-19-L-D-950-270 | Samtec Inc | Flexible Board Stacking Header, 0.100" P RoHS : Compliant |
| 204 | ||
| ZW-08-19-G-D-950-250 | Samtec Inc | Flexible Board Stacking Header, 0.100" P RoHS : Compliant |
| 133 | ||
| ZW-10-14-G-D-950-250 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 118 | ||
| MTMM-122-05-G-D-195-020 | Samtec Inc | Variable Post Height Header Strips, 2.00 RoHS : Compliant |
| 90 | ||
| ZW-36-14-G-S-950-240 | Samtec Inc | Flexible Board Stacking Header, 0.100" P RoHS : Compliant |
| 44 | ||
| 1110950-2 | TE Connectivity | Unspecified Connectors |
| 10 | ||
| RM452-086-311-9502 | AirBorn a molex company | 4 Row Right Angle Plated Thru Hole PCB C RoHS : Compliant |
| 9 | ||
W-095-02![]() | TE Connectivity | Connectors RoHS : Compliant |
| 5 | ||
| 9502-4-0-0 | Amphenol Positronic | Tool/Hardware |
| 3 | ||
![]() PUI | 12.99502 | 13,018 | ||||
| 12.95027 | 6,211 | |||||
| 12.95025 | 2,080 | |||||
| 12.95026 | 1,000 | |||||
| 12.95028 | 500 | |||||
| 12.95023 | 295 | |||||
| 12.95022 | 10 | |||||
| 12.95020 | 8 | |||||
![]() Richardson RFPD | 935395026564 | NXP Semiconductors | RF Amp Single Power Amp 2.2GHz 32V 5-Pin Case 301A RoHS : Compliant |
| 57 | |
| CCHD-950-25-60.000 | Crystek Corporation | Oscillator XO 60MHz ±25ppm 15pF HCMOS 55% 3.3V 4-P RoHS : Compliant | 0 | |||
| MOX95022505FTE | Ohmite Mfg Co | Res Thick Film 25M Ohm 1% 13.5W ±100ppm/°CConforma RoHS : Compliant |
| 0 | ||
| RFA-4195-02 | RF Industries | Adapter Kit, 4.1/9.5 to 7/16 DIN, 6-PC, in Zipper RoHS : Compliant |
| 0 | ||
| LL043-01SP-01SP-999-5-02 | Samtec Inc | RF STD CABLE ASSY RoHS : Compliant | 0 | |||
| CVCO55CC-2950-2950 | Crystek Corporation | OSCILLATOR VCO RoHS : Compliant | 0 | |||
| CRBV55BE-0950-2050 | Crystek Corporation | vco RoHS : Not Compliant | 0 | |||
| CCHD-950-25-54.000 | Crystek Corporation | Ultra-Low Phase Noise Oscillator 9x14 mm SMD RoHS : Compliant | 0 | |||
| SI5344A-D09502-GMR | Skyworks Solutions Inc | Clock Generator 0.008MHz to 750MHz-IN 1028MHz-OUT RoHS : Compliant | 0 | |||
| CVCO55CW-0950-2150 | Crystek Corporation | OSCILLATOR VCO RoHS : Compliant | 0 | |||
| CVCO55BE-1950-2150 | Crystek Corporation | VoltageControlled Oscillator RoHS : Compliant | 0 | |||
| CVCO55BE1950207 | Crystek Corporation | OSCILLATOR VCO RoHS : Compliant | 0 | |||
| R-13950-2 | TE Connectivity | MISC SENSORS RoHS : Not Compliant | 0 | |||
| 1879502-6 | TE Connectivity | Res Thick Film 2512 22K Ohm 5% 2W ±100ppm/C Pad SM RoHS : Compliant | 0 | |||
| LL071-18SP-18SP-999-5-02 | Samtec Inc | Nitrowave LL071 Cable, 1.85mm Plug to 1.85mm Plug, RoHS : Not Compliant | 0 | |||
![]() Chip 1 Exchange | 12.99502 | Geyer Electronic E K | INSTOCK | 12,018 | ||
| LQG15HN3N9502D | INSTOCK | 10,000 | ||||
| 950221647- | Molex | INSTOCK | 6,724 | |||
| 12.95027 | Geyer Electronic E K | INSTOCK | 6,211 | |||
| 95022-2881-LF | INSTOCK | 3,171 | ||||
| STLZ950/2G-5.08-H | INSTOCK | 2,000 | ||||
| MDPX812R1950/2140AP | SANG | INSTOCK | 1,840 | |||
| 12.95026 | Geyer Electronic E K | INSTOCK | 1,000 | |||
| 12.95028 | Geyer Electronic E K | INSTOCK | 500 | |||
| DS9502P | INSTOCK | 272 | ||||
| ASP-102495-02 | INSTOCK | 103 | ||||
| 7114-3095-02 | Yazaki Corp | INSTOCK | 100 | |||
| 550-2950-29-02-00 | INSTOCK | 64 | ||||
| 12.9502 | Geyer Electronic E K | INSTOCK | 8 | |||
| 01300-69502 | INSTOCK | 1 | ||||
![]() Avnet Abacus | 395021005 | Molex | (Alt: 395021005) RoHS : Compliant | 6,912 | ||
| 395021004 | Molex | (Alt: 395021004) RoHS : Compliant | 1,596 | |||
| R6395-02 | Harwin | M3 Threaded Hexagonal Brass Spacer 5mm AF 1905mm 075 body length Nickel finish (Alt: R6395-02) RoHS : Compliant | 1,000 | |||
| C10-731950-221 | Amphenol Corporation | Conn Power RCP 1 POS Solder Tab ST Flange Mount 1 Terminal 1 Port (Alt: SLPIRBTPSR1) RoHS : Compliant | 95 | |||
| C10-731950-211 | Amphenol Corporation | Conn Power RCP 1 POS Solder Tab ST Flange Mount 1 Terminal 1 Port (Alt: SLPIRBBPSR1) RoHS : Compliant | 45 | |||
| 1950256 | Phoenix Contact | MDSTB 25 4G1508 BUGY 2327 MDSTB254G1508BUGY2327 (Alt: 1950256) RoHS : Compliant | 0 | |||
| 395026009 | Molex | (Alt: 395026009) RoHS : Compliant | 0 | |||
| 395026009 | Molex | (Alt: 395026009) RoHS : Compliant | 0 | |||
| 1895020000 | Weidmüller Interface GmbH & Co. KG | (Alt: 1895020000) RoHS : Compliant | 0 | |||
| 269502-000 | TE Connectivity | (Alt: 269502-000) RoHS : Not Compliant | 0 | |||
| 1-1705950-2 | TE Connectivity | (Alt: 1-1705950-2) RoHS : Compliant | 0 | |||
| 1-1705950-2 | TE Connectivity | (Alt: 1-1705950-2) RoHS : Compliant | 0 | |||
| C10-731950-203 | Amphenol Corporation | (Alt: SLPIRB50CPSR3) RoHS : Compliant | 0 | |||
| 72309-5023BPLF | Amphenol Corporation | (Alt: 72309-5023BPLF) RoHS : Compliant | 0 | |||
| C10-731950-212 | Amphenol Corporation | (Alt: SLPIRBBPSR2) RoHS : Compliant | 0 | |||
![]() Avnet Asia | 0395026005 | Molex | (Alt: 0395026005) RoHS : Compliant | 0 | ||
| 109502-E | TE Connectivity | Conn Stacking Receptacle 60 POS 1.27mm Solder ST Through Hole Tube (Alt: 109502-E) RoHS : Compliant | 0 | |||
| 2-2376950-2 | TE Connectivity | (Alt: 2-2376950-2) RoHS : Compliant | 0 | |||
| 1301.9502 | Schurter Electronic Components | (Alt: 1301.9502) RoHS : Compliant | 0 | |||
| 0039295023 | Molex | Pin Header, 2 Contacts, 2 Rows, 4.2mm, Gold, 13A, Right Angle, Shrouded, Brass Alloy, Wire-to-Board (Alt: 0039295023) RoHS : Compliant | 0 | |||
![]() Avnet Silica | M95020-RMN6TP![]() | STMicroelectronics | (Alt: M95020-RMN6TP) RoHS : Compliant | 17,500 | ||
M95020-WMN6TP![]() | STMicroelectronics | EEPROM 2 Kbit 256 x 8bit SPI 10 MHz NSOIC 8 Pins (Alt: M95020-WMN6TP) RoHS : Compliant | 12,500 | |||
| M95020-DRDW3TP/K | STMicroelectronics | (Alt: M95020-DRDW3TP/K) RoHS : Compliant | 12,000 | |||
M95020-WDW6TP![]() | STMicroelectronics | EEPROM SerialSPI 2Kbit 256 x 8 33V5V 8Pin TSSOP TR (Alt: M95020-WDW6TP) RoHS : Compliant | 4,000 | |||
| L9502B | STMicroelectronics | Gate Driver (Alt: L9502B) RoHS : Compliant | 0 | |||
| MIC69502WR | Microchip Technology Inc | (Alt: MIC69502WR) RoHS : Compliant | 0 | |||
| MIC29502WT | Microchip Technology Inc | LDO Regulator Pos 125V to 25V 5A 5Pin TO220 (Alt: MIC29502WT) RoHS : Compliant | 0 | |||
| MIC29502WU | Microchip Technology Inc | LDO Voltage Regulator Adjustable 25V to 26V in 370mV drop 125V to 26V5A out TO2635 (Alt: MIC29502WU) RoHS : Compliant | 0 | |||
| MIC29502WU-TR | Microchip Technology Inc | Adjustable LDO Voltage Regulator 23V to 26V 370mV Drop 125V to 25V5A Out TO2635 (Alt: MIC29502WU-TR) RoHS : Compliant | 0 | |||
| M95020-DWMN3TG | STMicroelectronics | STMM95020DWMN3TG (Alt: M95020-DWMN3TG) RoHS : Compliant | 0 | |||
| M95020-DRMF3TG/K | STMicroelectronics | EEPROM SerialSPI 2Kbit 256 x 8 25V33V5V 8Pin WFDFPN TR (Alt: M95020-DRMF3TG/K) RoHS : Compliant | 0 | |||
| MCP9502PT-085E/OT | Microchip Technology Inc | (Alt: MCP9502PT-085E/OT) RoHS : Compliant | 0 | |||
| MCP9502PT-065E/OT | Microchip Technology Inc | (Alt: MCP9502PT-065E/OT) RoHS : Compliant | 0 | |||
| MCP9502PT-115E/OT | Microchip Technology Inc | (Alt: MCP9502PT-115E/OT) RoHS : Compliant | 0 | |||
| DTR0000295024 (ALS) | Sanmina Corporation | (Alt: DTR0000295024) RoHS : Not Compliant | 0 | |||
![]() Chip-Germany GmbH | MIC29502WU | Micrel Inc | RoHS : Compliant | 2 | ||
![]() Component Electronics, Inc | EDSTL950/2 | On-Shore Technology Inc | IN STOCK SHIP TODAY |
| 96 | |
| 39502500440 | Littelfuse Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 80 | ||
| 0950-2435 | Hewlett Packard Co | IN STOCK SHIP TODAY |
| 69 | ||
| AK950/2-5.0-GREEN | PTR Messtechnik GmbH & Co KG | IN STOCK SHIP TODAY RoHS : Compliant |
| 46 | ||
MIC29502BU![]() | Micrel Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 35 | ||
M95020-WMN6TP![]() | STMicroelectronics | IN STOCK SHIP TODAY RoHS : Compliant |
| 35 | ||
| 359-8430-09-502 | Dialight | IN STOCK SHIP TODAY RoHS : Compliant |
| 22 | ||
| B39202-B9502-L310 | TDK Electronics | IN STOCK SHIP TODAY |
| 20 | ||
| 554950-2 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 12 | ||
| 5950-21-894-7584 | CRITERION | IN STOCK SHIP TODAY | 3 | |||
| 095-0266-525 | ITT Interconnect Solutions | IN STOCK SHIP TODAY | 3 | |||
| 51-295-025K | EAO AG | IN STOCK SHIP TODAY | 1 | |||
| 9502-060-1000 | Belden Inc | IN STOCK SHIP TODAY |
| 1 | ||
| 2950227-2 | PEIZO | IN STOCK SHIP TODAY | 1 | |||
| 9502-060-500 | Belden Inc | IN STOCK SHIP TODAY |
| 1 | ||
![]() DB Roberts | SPL49502 | Spiralock | #6-32 SPL Hi Limit PD Gage Standard Gage |
| 2 | |
| FCWA-0095-025 | Essentra Components | 0 | ||||
| 1950-2520-B-12 | RAF Electronic Hardware | 0 | ||||
| 3695-02 | HeliCoil | AUTO TBO TOOL 2 | 0 | |||
| D7-295-027-191 | Southco | 0 | ||||
| 20595029 | Essentra Components | 28MM.8-3MMWT ROUND TUBE INSERT | 0 | |||
| 1950-2520-SS | RAF Electronic Hardware | 0 | ||||
| E5-1-195-020 | Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | 0 | |||
| -10819502 REV A.-22 | RAF Electronic Hardware | 0 | ||||
| 34009502 | Essentra Components | GASKETS, PROFILE EDGE PROTECTI | 0 | |||
| MA-379-5020 | SHEREX FASTENING SO | 0 | ||||
| FCYJ-0095-025 | Essentra Components | 0 | ||||
| 199502 | Essentra Components | 0 | ||||
| 3695-02-30 | HeliCoil | 0 | ||||
| 1950-2520-S | RAF Electronic Hardware | 0 | ||||
![]() EBV Elektronik | AFBR-395025RZ | Broadcom Limited | (Alt: AFBR-395025RZ) RoHS : Compliant | 59,400 | ||
| M95020-DRMN3TP/K | STMicroelectronics | EEPROM SerialSPI 2Kbit 256 x 8 25V33V5V 8Pin SOIC TR (Alt: M95020-DRMN3TP/K) RoHS : Compliant | 12,500 | |||
| L9502B | STMicroelectronics | Gate Driver (Alt: L9502B) RoHS : Compliant | 0 | |||
| MIC69502WR | Microchip Technology Inc | (Alt: MIC69502WR) RoHS : Compliant | 0 | |||
| L9502TS-TR | STMicroelectronics | Automotive galvanically isolated advanced gate driver with isolated flyback controller (Alt: L9502TS-TR) RoHS : Compliant | 0 | |||
| MIC29502WT | Microchip Technology Inc | LDO Regulator Pos 125V to 25V 5A 5Pin TO220 (Alt: MIC29502WT) RoHS : Compliant | 0 | |||
| L9502TF-TR | STMicroelectronics | Automotive galvanically isolated advanced gate driver with isolated flyback controller (Alt: L9502TF-TR) RoHS : Compliant | 0 | |||
| MIC29502WU | Microchip Technology Inc | LDO Voltage Regulator Adjustable 25V to 26V in 370mV drop 125V to 26V5A out TO2635 (Alt: MIC29502WU) RoHS : Compliant | 0 | |||
M95020-WMN6P![]() | STMicroelectronics | EEPROM SerialSPI 2Kbit 256 x 8 33V5V 8Pin SO N (Alt: M95020-WMN6P) RoHS : Compliant | 0 | |||
| MIC29502WU-TR | Microchip Technology Inc | Adjustable LDO Voltage Regulator 23V to 26V 370mV Drop 125V to 25V5A Out TO2635 (Alt: MIC29502WU-TR) RoHS : Compliant | 0 | |||
M95020-RMN6TP![]() | STMicroelectronics | (Alt: M95020-RMN6TP) RoHS : Compliant | 0 | |||
| M95020-DRMF3TG/K | STMicroelectronics | EEPROM SerialSPI 2Kbit 256 x 8 25V33V5V 8Pin WFDFPN TR (Alt: M95020-DRMF3TG/K) RoHS : Compliant | 0 | |||
| M95020-DRDW3TP/K | STMicroelectronics | (Alt: M95020-DRDW3TP/K) RoHS : Compliant | 0 | |||
| MCP9502PT-115E/OT | Microchip Technology Inc | (Alt: MCP9502PT-115E/OT) RoHS : Compliant | 0 | |||
| MCP9502PT-095E/OT | Microchip Technology Inc | (Alt: MCP9502PT-095E/OT) RoHS : Compliant | 0 | |||
![]() Flip Electronics | S99-50239 | Infineon Technologies AG | Stock | 6,300 | ||
PCA9502BS,128![]() | NXP Semiconductors | Stock RoHS : Compliant | 1,440 | |||
| S99-50276 | Infineon Technologies AG | Stock, Ship Today |
| 563 | ||
![]() Master Electronics | 769-502 | WAGO Innovative Connections | Center module for 1-conductor female connector - CAGE CLAMP® - 4 mm² - Pin spacing 5 mm - 1-pole - coding finger - 4 00 mm² - gray RoHS : Compliant |
| 930 | |
| 1-1705950-2 | TE Connectivity | Modular Jack SE 6/4 Gold flash MOQ Reduction RoHS : Compliant |
| 0 | ||
| 1-1879502-5 | TE Connectivity | CRGH2512 5% 51K 2W MOQ Reduction RoHS : Compliant |
| 0 | ||
| TW-14-06-L-D-335-095-027 | Samtec Inc | Conn Board Stacker HDR 28 POS 2mm Solder ST Thru-Hole RoHS : Compliant |
| 0 | ||
| 121095-0288-X | ITT Interconnect Solutions | CA20L28-21SXB; CA Bayonet; Circular RoHS : Not Compliant |
| 0 | ||
| 115395-0212 | ITT Interconnect Solutions | KPSE1E1419P-DZ; MIL-DTL 26482 Series I & Mil Batte RoHS : Not Compliant |
| 0 | ||
| 115395-0221-W | ITT Interconnect Solutions | Kpse 32C 3220 Skt Recp RoHS : Not Compliant |
| 0 | ||
| 21349700495020 | OMRON Industrial Automation | RoHS : Compliant |
| 0 | ||
| 6-1879502-8 | TE Connectivity | CRGH2512 5% 8M2 2W MOQ Reduction RoHS : Compliant |
| 0 | ||
| AP7-1-59-502 | Sensata Circuit Breakers | Magnetic Circuit Breaker - 5.00A - Single Pole - 240VAC Max - Screw Terminals - DC - 125% instant trip - Sealed RoHS : Not Compliant |
| 0 | ||
| ZW-10-14-G-D-950-250 | Samtec Inc | .100 Inch Pitch Board Stacker - Double Row - 10 Pins per Row - 10u Gold Contact - Gold Flash Tail - 0.95 Inch Stacker Height RoHS : Compliant |
| 0 | ||
| ZW-26-14-S-D-950-200 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HPW-05-04-T-S-950-250 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HCMD-10-T-29.95-02 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 66L095-0248 | Sensata Circuit Breakers | DIP thermostat open on rise RoHS : Compliant |
| 0 | ||
![]() Neutron USA | MOX95021004FVE | Ohmite Mfg Co | Metal Oxide Resistors 13.5watt 1Mohm 1% RoHS : Compliant |
| 50 | |
| 9502600000 | Weidmüller Interface GmbH & Co. KG | 9502600000, DIN Rail Terminal Blocks SAKK 4 RoHS : Compliant |
| 50 | ||
| MOX95022505FTE | Ohmite Mfg Co | Metal Oxide Resistors 13.5watt 25Mohm 1% RoHS : Compliant |
| 50 | ||
| MOX95025004FVE | Ohmite Mfg Co | Metal Oxide Resistors 13.5watt 5Mohm 1% RoHS : Compliant |
| 50 | ||
| 095-909-195-024 | Amphenol Corporation | Cable Assemblies CA N -SMA SP-SP 24.00" RoHS : Compliant |
| 50 | ||
| 69-502 | 3M Touch Systems | Modules Accessories Capacitive Touch Stylus Pen |
| 26 | ||
| 51-495.025D | EAO AG | Keylock Switches KYLK SQ MNT 2POS |
| 25 | ||
| 1950-20-2F | Dwyer Instruments Inc | Differential Pressure Switch, Explosion Proof, Deadband 4-20in w.c., 1950 Series |
| 14 | ||
| 1025950250 | Weidmüller Interface GmbH & Co. KG | Sensor Cables / Actuator Cables IE-C5DD4UG0250MCSMCS-E RoHS : Compliant |
| 11 | ||
| 51-195.022D | EAO AG | Keylock Switches KYLK REC MNT 2POS RoHS : Compliant |
| 10 | ||
| 1950280000 | Weidmüller Interface GmbH & Co. KG | Heavy Duty Power Connectors HDC CM RJ45 M |
| 9 | ||
| 51-495.022D | EAO AG | Keylock Switch,2 Positions,1NC+1NO,Rest/MOM,Key Remove A,5A,250VAC,Solder RoHS : Compliant |
| 4 | ||
| 11006009502 | HARTING Technology Group | Heavy Duty Power Connectors HAN YELLOCK 60 SEAL F. CARRIER HOOD RoHS : Compliant |
| 0 | ||
| AFBR-395025RZ | Broadcom Limited | Fiber Optic Transmitters, Receivers, Transceivers REGULUS FLEX SH LINK 50MBAUD, 1INCH RoHS : Compliant |
| 0 | ||
| 51-195.025D | EAO AG | Keylock Switches KEYLOCK 2POS 1PST DB |
| 0 | ||
![]() Pasternack Enterprises US | PE9502 | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.4mm, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Impedance 2: 50 Ohm, Frequency, Min: DC, Frequency, Max: 18 GHz, Adapter Body Style: Straight, Connector Mount Method 1: None, Connector Mount Method 2: None. Precision 2.4mm Female to N Female Adapter. 2.4mm adapter PE9502 is one of over 40,000 available RF, microwave and millimeter wave components from Pasternack. Our 2.4mm to type N adapter is a between series coaxial adapter design. This 50 Ohm 2.4mm adapter is precision manufactured to RF components industry specifications and has a maximum frequency of 18 GHz. 2.4mm female to N type female adapter is one of the many RF components that ship same day as they are ordered. PE9502 female 2.4mm to female type N adapter has a straight body. This Pasternack straight 2.4mm coax adapter is a in-line RF adapter. Our female 2.4mm to female type N adapter PE9502 is shipped from our facility certified to ISO 9001:2015 the same day as purchased. This 2.4mm to type N radio frequency adapter is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. |
| 28 | |
| PE3C9502 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SHV, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SHV, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tinned Copper, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP67 Rated. SHV Jack to SHV Jack Bulkhead Cable Using RG142 Coax., Radio frequency assembly SHV jack to SHV jack bulkhead cable using RG142 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SHV jack to SHV jack bulkhead cable using RG142 coax, SHV cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SHV to SHV cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SHV cable connection on one end and SHV bulkhead cable connection on the other. Our SHV to SHV IP67 Rated cable assemblies have a jack gender on end 1 and jack on end 2. PE3C9502 can also be known as a SHV female to SHV female cable assembly and will be shipped same-day as it is purchased. SHV female to SHV female cable assembly PE3C9502 is built with RG142 which is a flexible coax type. The Pasternack IP67 Rated flexible SHV cable assembly is manufactured with SHV to SHV cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 300 MHz maximum frequency SHV jack to SHV jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C9502 can also be used in the other direction and will be SHV jack bulkhead to SHV jack cable assembly if the opposite connectivity is required. SHV female to SHV female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SHV to SHV cable assembly for quick shipment worldwide. Variations of SHV cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SHV jack to SHV jack bulkhead cable using RG142 coax. | 10 | |||
| PE3C4950-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: BMA, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm, Length: 24 inches. Slide-On BMA Plug Bulkhead to Slide-On BMA Plug Bulkhead Cable 24 Inch Length Using RG400 Coax., Radio frequency assembly slide-on BMA plug bulkhead to slide-on BMA plug bulkhead cable 24 inch length using RG400 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Slide-on BMA plug bulkhead to slide-on BMA plug bulkhead cable 24 inch length using RG400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to BMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA bulkhead cable connection on one end and BMA bulkhead cable connection on the other. Our BMA to BMA cable assemblies have a plug gender on end 1 and plug on end 2. This BMA to BMA cable is a plug to plug coax assembly, PE3C4950-24, can also be known as a BMA male to BMA male cable assembly and will be shipped same-day as it is purchased. BMA male to BMA male cable assembly PE3C4950-24 is built with RG400 which is a flexible coax type. The Pasternack flexible BMA cable assembly is manufactured with BMA to BMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 12.4 GHz maximum frequency BMA plug bulkhead to BMA plug bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BMA male bulkhead to BMA male bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to BMA cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this slide-on BMA plug bulkhead to slide-on BMA plug bulkhead cable 24 inch length using RG400 coax. |
| 9 | ||
| PE3C9502-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SHV, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SHV, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tinned Copper, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP67 Rated, Length, Max: 60 inches. SHV Jack to SHV Jack Bulkhead Cable 60 Inch Length Using RG142 Coax., Radio frequency assembly SHV jack to SHV jack bulkhead cable 60 inch length using RG142 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SHV jack to SHV jack bulkhead cable 60 inch length using RG142 coax, SHV cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SHV to SHV cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SHV cable connection on one end and SHV bulkhead cable connection on the other. Our SHV to SHV IP67 Rated cable assemblies have a jack gender on end 1 and jack on end 2. PE3C9502-60 can also be known as a SHV female to SHV female cable assembly and will be shipped same-day as it is purchased. SHV female to SHV female cable assembly PE3C9502-60 is built with RG142 which is a flexible coax type. The Pasternack IP67 Rated flexible SHV cable assembly is manufactured with SHV to SHV cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 300 MHz maximum frequency SHV jack to SHV jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C9502-60 can also be used in the other direction and will be SHV jack bulkhead to SHV jack cable assembly if the opposite connectivity is required. SHV female to SHV female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SHV to SHV cable assembly for quick shipment worldwide. Variations of SHV cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SHV jack to SHV jack bulkhead cable 60 inch length using RG142 coax. |
| 2 | ||
| PE3C9502-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SHV, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SHV, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tinned Copper, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP67 Rated, Length, Max: 12 inches. SHV Jack to SHV Jack Bulkhead Cable 12 Inch Length Using RG142 Coax., Radio frequency assembly SHV jack to SHV jack bulkhead cable 12 inch length using RG142 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SHV jack to SHV jack bulkhead cable 12 inch length using RG142 coax, SHV cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SHV to SHV cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SHV cable connection on one end and SHV bulkhead cable connection on the other. Our SHV to SHV IP67 Rated cable assemblies have a jack gender on end 1 and jack on end 2. PE3C9502-12 can also be known as a SHV female to SHV female cable assembly and will be shipped same-day as it is purchased. SHV female to SHV female cable assembly PE3C9502-12 is built with RG142 which is a flexible coax type. The Pasternack IP67 Rated flexible SHV cable assembly is manufactured with SHV to SHV cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 300 MHz maximum frequency SHV jack to SHV jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C9502-12 can also be used in the other direction and will be SHV jack bulkhead to SHV jack cable assembly if the opposite connectivity is required. SHV female to SHV female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SHV to SHV cable assembly for quick shipment worldwide. Variations of SHV cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SHV jack to SHV jack bulkhead cable 12 inch length using RG142 coax. |
| 2 | ||
| PE3C9502-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SHV, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SHV, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tinned Copper, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP67 Rated, Length, Max: 24 inches. SHV Jack to SHV Jack Bulkhead Cable 24 Inch Length Using RG142 Coax., Radio frequency assembly SHV jack to SHV jack bulkhead cable 24 inch length using RG142 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SHV jack to SHV jack bulkhead cable 24 inch length using RG142 coax, SHV cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SHV to SHV cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SHV cable connection on one end and SHV bulkhead cable connection on the other. Our SHV to SHV IP67 Rated cable assemblies have a jack gender on end 1 and jack on end 2. PE3C9502-24 can also be known as a SHV female to SHV female cable assembly and will be shipped same-day as it is purchased. SHV female to SHV female cable assembly PE3C9502-24 is built with RG142 which is a flexible coax type. The Pasternack IP67 Rated flexible SHV cable assembly is manufactured with SHV to SHV cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 300 MHz maximum frequency SHV jack to SHV jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C9502-24 can also be used in the other direction and will be SHV jack bulkhead to SHV jack cable assembly if the opposite connectivity is required. SHV female to SHV female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SHV to SHV cable assembly for quick shipment worldwide. Variations of SHV cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SHV jack to SHV jack bulkhead cable 24 inch length using RG142 coax. |
| 2 | ||
| PE3C9502-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SHV, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SHV, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tinned Copper, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP67 Rated, Length, Max: 36 inches. SHV Jack to SHV Jack Bulkhead Cable 36 Inch Length Using RG142 Coax., Radio frequency assembly SHV jack to SHV jack bulkhead cable 36 inch length using RG142 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SHV jack to SHV jack bulkhead cable 36 inch length using RG142 coax, SHV cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SHV to SHV cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SHV cable connection on one end and SHV bulkhead cable connection on the other. Our SHV to SHV IP67 Rated cable assemblies have a jack gender on end 1 and jack on end 2. PE3C9502-36 can also be known as a SHV female to SHV female cable assembly and will be shipped same-day as it is purchased. SHV female to SHV female cable assembly PE3C9502-36 is built with RG142 which is a flexible coax type. The Pasternack IP67 Rated flexible SHV cable assembly is manufactured with SHV to SHV cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 300 MHz maximum frequency SHV jack to SHV jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C9502-36 can also be used in the other direction and will be SHV jack bulkhead to SHV jack cable assembly if the opposite connectivity is required. SHV female to SHV female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SHV to SHV cable assembly for quick shipment worldwide. Variations of SHV cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SHV jack to SHV jack bulkhead cable 36 inch length using RG142 coax. |
| 2 | ||
| PE3C9502-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SHV, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SHV, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tinned Copper, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP67 Rated, Length, Max: 48 inches. SHV Jack to SHV Jack Bulkhead Cable 48 Inch Length Using RG142 Coax., Radio frequency assembly SHV jack to SHV jack bulkhead cable 48 inch length using RG142 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SHV jack to SHV jack bulkhead cable 48 inch length using RG142 coax, SHV cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SHV to SHV cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SHV cable connection on one end and SHV bulkhead cable connection on the other. Our SHV to SHV IP67 Rated cable assemblies have a jack gender on end 1 and jack on end 2. PE3C9502-48 can also be known as a SHV female to SHV female cable assembly and will be shipped same-day as it is purchased. SHV female to SHV female cable assembly PE3C9502-48 is built with RG142 which is a flexible coax type. The Pasternack IP67 Rated flexible SHV cable assembly is manufactured with SHV to SHV cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 300 MHz maximum frequency SHV jack to SHV jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C9502-48 can also be used in the other direction and will be SHV jack bulkhead to SHV jack cable assembly if the opposite connectivity is required. SHV female to SHV female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SHV to SHV cable assembly for quick shipment worldwide. Variations of SHV cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SHV jack to SHV jack bulkhead cable 48 inch length using RG142 coax. |
| 2 | ||
| PE39502 | Pasternack Enterprises | 0 | ||||
| PE3W19502 | Pasternack Enterprises | Key Specifications, Connector Series 1: UHF, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG213/U, RF Cable Type: RG213, RF Cable Impedance: 50 Ohm. UHF Male to 7/16 DIN Male Cable Using RG213 Coax. PE3W19502 is a UHF male to 7/16 DIN male cable using RG213 coax. This Pasternack UHF male to 7/16 DIN male cable assembly uses a 50 Ohm UHF for connector 1 and a 50 Ohm 7/16 DIN for connector 2. Our male UHF to male 7/16 DIN cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W19502 UHF male to 7/16 DIN male cable assembly is constructed with RG213 coax. | 0 | |||
| PE3C5950-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.1/9.5 Mini DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.3-10, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 24 inches. Plenum 4.1/9.5 Mini DIN Male Right Angle to 4.3-10 Female Low PIM Cable 24 Inch Length Using SPP-250-LLPL Coax, LF Solder., Radio frequency assembly plenum 4.1/9.5 mini DIN male right angle to 4.3-10 female low PIM cable 24 inch length using SPP-250-LLPL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum 4.1/9.5 mini DIN male right angle to 4.3-10 female low PIM cable 24 inch length using SPP-250-LLPL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.1/9.5 mini DIN to 4.3-10 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with right angle 4.1/9.5 mini DIN cable connection on one end and 4.3-10 cable connection on the other. Our low PIM right angle 4.1/9.5 mini DIN to 4.3-10 cable assemblies have a male gender on end 1 and female on end 2. This 4.1/9.5 mini DIN to 4.3-10 cable is a male to female coax assembly, PE3C5950-24, can also be known as a low PIM right angle 4.1/9.5 mini DIN plug to 4.3-10 jack cable assembly and will be shipped same-day as it is purchased. 4.1/9.5 mini DIN plug to 4.3-10 jack cable assembly PE3C5950-24 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 4.1/9.5 Mini DIN cable assembly is manufactured with right angle 4.1/9.5 mini DIN to 4.3-10 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM 4.1/9.5 mini DIN right angle male to 4.3-10 female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5950-24 can also be used in the other direction and will be 4.3-10 female to right angle 4.1/9.5 mini DIN male cable assembly if the opposite connectivity is required. Low PIM 4.1/9.5 mini DIN right angle plug to 4.3-10 jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.1/9.5 mini DIN to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.1/9.5 mini DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 4.1/9.5 mini DIN male right angle to 4.3-10 female low PIM cable 24 inch length using SPP-250-LLPL coax, LF solder. |
| 0 | ||
| PE3950-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: MHV, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SHV, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm, Length: 24 inches. MHV Male to SHV Plug Cable 24 Inch Length Using RG58 Coax., Radio frequency assembly MHV male to SHV plug cable 24 inch length using RG58 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MHV male to SHV plug cable 24 inch length using RG58 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MHV to SHV cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with MHV cable connection on one end and SHV cable connection on the other. Our MHV to SHV cable assemblies have a male gender on end 1 and plug on end 2. This MHV to SHV cable is a male to plug coax assembly, PE3950-24, can also be known as a MHV plug to SHV male cable assembly and will be shipped same-day as it is purchased. MHV plug to SHV male cable assembly PE3950-24 is built with RG58 which is a flexible coax type. The Pasternack flexible MHV cable assembly is manufactured with MHV to SHV cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 300 MHz maximum frequency MHV male to SHV plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3950-24 can also be used in the other direction and will be SHV plug to MHV male cable assembly if the opposite connectivity is required. MHV plug to SHV male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MHV to SHV cable assembly for quick shipment worldwide. Variations of MHV cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MHV male to SHV plug cable 24 inch length using RG58 coax. |
| 0 | ||
| PE3C5950-200CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.1/9.5 Mini DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.3-10, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 78.7402 inches. Plenum 4.1/9.5 Mini DIN Male Right Angle to 4.3-10 Female Low PIM Cable 200 cm Length Using SPP-250-LLPL Coax, LF Solder., Radio frequency assembly plenum 4.1/9.5 mini DIN male right angle to 4.3-10 female low PIM cable 200 cm length using SPP-250-LLPL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum 4.1/9.5 mini DIN male right angle to 4.3-10 female low PIM cable 200 cm length using SPP-250-LLPL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.1/9.5 mini DIN to 4.3-10 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with right angle 4.1/9.5 mini DIN cable connection on one end and 4.3-10 cable connection on the other. Our low PIM right angle 4.1/9.5 mini DIN to 4.3-10 cable assemblies have a male gender on end 1 and female on end 2. This 4.1/9.5 mini DIN to 4.3-10 cable is a male to female coax assembly, PE3C5950-200CM, can also be known as a low PIM right angle 4.1/9.5 mini DIN plug to 4.3-10 jack cable assembly and will be shipped same-day as it is purchased. 4.1/9.5 mini DIN plug to 4.3-10 jack cable assembly PE3C5950-200CM is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 4.1/9.5 Mini DIN cable assembly is manufactured with right angle 4.1/9.5 mini DIN to 4.3-10 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM 4.1/9.5 mini DIN right angle male to 4.3-10 female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5950-200CM can also be used in the other direction and will be 4.3-10 female to right angle 4.1/9.5 mini DIN male cable assembly if the opposite connectivity is required. Low PIM 4.1/9.5 mini DIN right angle plug to 4.3-10 jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.1/9.5 mini DIN to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.1/9.5 mini DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 4.1/9.5 mini DIN male right angle to 4.3-10 female low PIM cable 200 cm length using SPP-250-LLPL coax, LF solder. |
| 0 | ||
![]() Vyrian | M95020-MN6![]() | STMicroelectronics | EEPROM, 256X8, Serial, CMOS, PDSO8 RoHS : Not Compliant | 12,354 | ||
M95020-MN3T![]() | STMicroelectronics | RoHS : Compliant | 9,089 | |||
| M95020-DRDW3TP/K | STMicroelectronics | RoHS : Compliant | 8,770 | |||
M95020-MN3TR![]() | STMicroelectronics | RoHS : Compliant | 8,664 | |||
| M95020-DRMN3TP/K | STMicroelectronics | RoHS : Compliant | 8,537 | |||
M95020-RDW6TP![]() | STMicroelectronics | RoHS : Compliant | 8,472 | |||
M95020-DW6T![]() | STMicroelectronics | RoHS : Not Compliant | 8,267 | |||
M95020-RBN3P![]() | STMicroelectronics | RoHS : Compliant | 7,274 | |||
M95020-DW6TR![]() | STMicroelectronics | RoHS : Not Compliant | 6,753 | |||
M95020-BN6![]() | STMicroelectronics | RoHS : Not Compliant | 6,128 | |||
| M95020-DRMF3TG/K | STMicroelectronics | RoHS : Compliant | 6,025 | |||
M95020-RBN3G![]() | STMicroelectronics | RoHS : Compliant | 5,489 | |||
M95020-MN3TP/S![]() | STMicroelectronics | RoHS : Compliant | 4,900 | |||
| M95020-DWDW4TP/K | STMicroelectronics | EEPROM, 256X8, Serial, CMOS, PDSO8 RoHS : Compliant | 3,949 | |||
M95020-MN6T![]() | STMicroelectronics | RoHS : Not Compliant | 3,505 | |||
![]() Waytek, Inc. | 0695025.PXPS | Littelfuse Inc | MCase+ 32VDC Slotted 25A RoHS : Compliant |
| 5,820 | |
| 0895020.Z | Littelfuse Inc | 20 Amp Low Profile JCase Fuse 58V Blue Cartridge Style RoHS : Compliant |
| 4,586 | ||
| 0695020.PXPS | Littelfuse Inc | MCase+ 32VDC Slotted 20A RoHS : Compliant |
| 4,210 | ||
| 0495020.ZXA | Littelfuse Inc | 20A Cartridge Style Fuse Blue JCase FMX 32V RoHS : Compliant |
| 3,172 | ||
| 0695020 | Littelfuse Inc | 20A MCase Blue Fuse 32V LIKE BUSSMANN FMM |
| 2,430 | ||
| 0495025.ZXA | Littelfuse Inc | 25A Cartridge Style Fuse White JCase FMX 32V RoHS : Compliant |
| 2,235 | ||
| 0895025.Z | Littelfuse Inc | 25 Amp Low Profile JCase Fuse Cartridge Style Fuse 58V RoHS : Compliant |
| 1,321 | ||
| 0695025 | Littelfuse Inc | 25A MCase White Fuse 32V LIKE BUSSMANN FMM |
| 1,222 | ||
| 99502-P1000 | FTZ Industries | 1-1/2" Battery Terminal Bolt 5/16"-18 Zinc Plated |
| 0 | ||
![]() Win Source Electronics | M95020-WMN6TP![]() | STMicroelectronics | IC EEPROM 2KBIT 10MHZ 8SO RoHS : Compliant |
| 55,000 | |
| M95020-DRMN3TP/K | STMicroelectronics | IC EEPROM 2KBIT SPI 20MHZ 8SO RoHS : Compliant |
| 40,000 | ||
CSD19502Q5B![]() | Texas Instruments | MOSFET N-CH 80V 100A 8SON RoHS : Compliant |
| 7,500 | ||
CSD19502Q5BT![]() | Texas Instruments | MOSFET N-CH 80V 100A SON5X6 RoHS : Compliant |
| 6,750 | ||
| MIC29502WU | Microchip Technology Inc | IC REG LDO ADJ 5A TO263-5 RoHS : Compliant |
| 6,500 | ||
| MIC29502WU-TR | Microchip Technology Inc | IC REG LDO ADJ 5A TO263-5 RoHS : Compliant |
| 6,040 | ||
ADA4950-2YCPZ-R7![]() | Analog Devices Inc | IC OPAMP DIFF 750MHZ 24LFCSP RoHS : Compliant |
| 5,730 | ||
ADA4950-2YCPZ-R2![]() | Analog Devices Inc | IC OPAMP DIFF 2 CIRCUIT 24LFCSP RoHS : Compliant |
| 5,720 | ||
| MIC69502WR | Microchip Technology Inc | IC REG LDO ADJ 5A SPAK-7 RoHS : Compliant |
| 5,670 | ||
ADA4950-2YCPZ-RL![]() | Analog Devices Inc | IC OPAMP DIFF 2 CIRCUIT 24LFCSP RoHS : Compliant |
| 5,470 | ||
MIC69502WR-TR![]() | Microchip Technology Inc | IC REG LINEAR POS ADJ 5A SPAK-7 RoHS : Compliant |
| 5,110 | ||
| MIC29502WT | Microchip Technology Inc | IC REG LDO ADJ 5A TO220-5 RoHS : Compliant |
| 4,628 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |