| Electronic Components Datasheet Search |
|
911CWC2 Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() Powell Electronics | 2199119-5 | TE Connectivity | Card Edge Connectors RoHS : Compliant |
| 9,296 | |
| 5499911-9 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 1,436 | ||
| 1958591-1 | TE Connectivity | Connectors |
| 528 | ||
| ZW-09-11-S-D-599-110 | Samtec Inc | Cable Assembly, Wire-to-Board, ZIF RoHS : Compliant |
| 487 | ||
| HW-08-10-G-D-491-169 | Samtec Inc | Cable Assembly, Wire-to-Board, High-Prof RoHS : Compliant |
| 299 | ||
| HW-08-10-L-D-409-118 | Samtec Inc | Cable Assembly, Wire-to-Board, High-Prof RoHS : Compliant |
| 260 | ||
| HW-09-11-L-D-609-110 | Samtec Inc | High Temperature Flexible Board Stacking RoHS : Compliant |
| 191 | ||
| ZW-09-11-T-D-591-110 | Samtec Inc | Flexible Board Stacking Header, 0.100" P RoHS : Compliant |
| 184 | ||
| 031-5911-RFX | Amphenol RF | BNC Right Angle Cable Plug 50 Ohm |
| 154 | ||
| 758-0019-11 | TE Connectivity | DEUTSCH CONNECTOR 758-0019-11 |
| 61 | ||
| 2-6609115-2 | TE Connectivity | TE COMPONENT (REF 2-6609115-2) RoHS : Compliant |
| 57 | ||
| CTV06RW-19-11P | Amphenol Corporation | CONNECTOR RoHS : Not Compliant |
| 56 | ||
| 1-6609114-4 | TE Connectivity | Switches RoHS : Compliant |
| 36 | ||
| 391.1702.230 | Altech Corporation | A3 ACTUATOR KEY |
| 12 | ||
| 806-012-Z19-11PBA-429C | Glenair Inc | MIGHTY MOUSE CONNECTOR |
| 2 | ||
![]() PUI | 9111-5310ACB30PU | 22,381 | ||||
| 12.89112 | 21,038 | |||||
| 9111-51150AC30DU-A001 | Oupiin | RoHS : Compliant | 4,004 | |||
| 9111-54101C30DU | 2,244 | |||||
| 12.89110 | 2,075 | |||||
| 9111-101D220ACCB30U | 476 | |||||
| 9111-521501C30DU | Oupiin | RoHS : Compliant | 367 | |||
| 9391-1P02S24P02CB30DLA | 342 | |||||
| 9111-46241C10PU | 315 | |||||
| 9111-72C552CB30U-A001 | 120 | |||||
| 9111-4196AC10PU | 74 | |||||
| 9111-4196JGC30PU | 50 | |||||
| 12.89911 | 10 | |||||
| 12.99112 | 5 | |||||
| 9111-52302C30DU | 3 | |||||
![]() Rutronik | 19-117/BHC-ZL1M2RY/6T | Everlight Electronics Co Ltd | SMD LED BLUE RoHS : Compliant |
| 96,000 | |
| BFC233911104 | Vishay Intertechnologies | FF 100nF 310Vac 10% X2 P15 MKP RoHS : Compliant |
| 57,500 | ||
| BFC233911474 | Vishay Intertechnologies | FF 470nF 310Vac 10% X2P22,5 MKP RoHS : Compliant |
| 17,800 | ||
| JVR14N911K87YRW | Joyin Co Ltd | VDR 14mm DC=745V CL=1500V 204J RoHS : Compliant |
| 8,000 | ||
| BFC233911334 | Vishay Intertechnologies | FF 330nF 310Vac 10% X2P22,5 MKP RoHS : Compliant |
| 6,000 | ||
| IRFHM3911TRPBF | Infineon Technologies AG | N-CH 100V 11A 115mOhm PQFN3X3 RoHS : Compliant |
| 4,000 | ||
| Q65112A9119 | ams OSRAM Group | POINTLED TRUE GREEN >1800MCD TOP RoHS : Compliant |
| 3,000 | ||
| A91-1015 | Alysium-Tech GmbH | FFC-Cable 20P L=47.5mm RoHS : Compliant |
| 2,010 | ||
| 3404.0009.11 | Schurter Electronic Components | OMF125 1A 125V SMT FAST RoHS : Compliant |
| 700 | ||
| 39.11.0.012.0060 | FINDER SpA | Koppel 1CO 12DC 6A RoHS : Compliant |
| 20 | ||
| 39.11.0.024.0060 | FINDER SpA | Koppel 1CO 24DC 6A RoHS : Compliant |
| 20 | ||
| 10174399-118KBLF | Amphenol Communications Solutions | 1.8MM WIRE TO BOARD-HEADER 18 POS COD B RoHS : Compliant |
| 8 | ||
| 10174399-118KALF | Amphenol Communications Solutions | 1.8MM WIRE TO BOARD-HEADER 18 POS COD A RoHS : Compliant |
| 8 | ||
![]() Avnet Asia | BZX585-C39,115![]() | Nexperia | (Alt: BZX585-C39,115) RoHS : Compliant | 54,000 | ||
| 62591-1 | TE Connectivity | Quick Disconnect Terminal, FASTON 187 Series, Female Flag Disconnect, 4.75mm x 0.81mm (Alt: 62591-1) RoHS : Compliant | 24,000 | |||
| NCV21911SN2T1G | onsemi | Precision Operational Amplifier, 2 MHz Bandwidth, Low Noise, Zero-Drift, 25 ?V Offset Precision Single Operational Amplifier, 2 MHz Bandwidth, Low Noise, Zero-Drift, 25 ?V Offset (Alt: NCV21911SN2T1G) RoHS : Compliant |
| 12,000 | ||
| 177911-1 | TE Connectivity | (Alt: 177911-1) RoHS : Compliant |
| 8,000 | ||
| 2391132-3 | TE Connectivity | (Alt: 2391132-3) RoHS : Compliant |
| 6,300 | ||
| 2391172-2 | TE Connectivity | (Alt: 2391172-2) RoHS : Compliant |
| 6,300 | ||
| 2391130-5 | TE Connectivity | MB LITE,R/A,HDR,SOLDER,2P+30S+2P (Alt: 2391130-5) RoHS : Compliant |
| 2,160 | ||
| 2391140-1 | TE Connectivity | (Alt: 2391140-1) RoHS : Compliant | 1,800 | |||
| 0735911745 | Molex | CIR/ 4400~5000 MHZ/CW (Alt: 0735911745) RoHS : Compliant | 900 | |||
| 0735911543 | Molex | (Alt: 0735911543) RoHS : Compliant | 900 | |||
| 0735911902 | Molex | CIR_N78(3300~3800MHZ) (Alt: 0735911902) RoHS : Compliant | 460 | |||
| 0735911901 | Molex | CIR_N78(3300~3800MHZ) (Alt: 0735911901) RoHS : Compliant | 370 | |||
| 0735911726 | Molex | CIR/N79 4400~5000MHZ (Alt: 0735911726) RoHS : Compliant | 70 | |||
| 0676433911 | Molex | USB Connector, Receptacle, USB 2.0, USB Type A, 4 Ways, Gold, THT, Right Angle, Phosphor Bronze (Alt: 0676433911) RoHS : Compliant | 0 | |||
| X1G004171005911 | Epson Electronics America Inc | SMD Clock Oscillator 25MHz 1.62V to 3.63V 15pF 4-Pin SMD T/R (Alt: X1G004171005911) RoHS : Compliant | 0 | |||
![]() DB Roberts | 44-99-119-11 | Southco | Just a fraction of a turn on a hand-actuated knob style or a tool-actuated style is all it takes to engage or disengage firm compressive action that reduces panel vibration and noise. The pawl rides smoothly on a threaded screw mechanism to provide quick | 0 | ||
| 1699111001E | Essentra Components | 0 | ||||
| 1399112 | Essentra Components | HINGE, SURFACE MOUNT - 80X110M | 0 | |||
| 09-11-303-11 | Southco | Get the functionality of a quicker screw fastening solution and the ease of more forgiving alignment for frequently accessed applications. These fasteners use a modified Acme thread to combine quick and easy engagement like a quarter-turn fastener pr | 0 | |||
| 09-11-307-26 | Southco | Get the functionality of a quicker screw fastening solution and the ease of more forgiving alignment for frequently accessed applications. These fasteners use a modified Acme thread to combine quick and easy engagement like a quarter-turn fastener pr | 0 | |||
| 3591-14CN1312 | HeliCoil | INS H-C 78-14UNF SL | 0 | |||
| 47-81-291-10 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 47-91-101-60 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 07159-11465 | Avdel | SPECIAL MANDREL | 0 | |||
| CR-19-11-35 | Southco | This heavy duty swing-handle latch design enhances vandal-resistant security and provides three points of engagement for even gasket compression in environmental EMI and RFI sealing applications. The versatile options of cam offset offer tremendous flex | 0 | |||
| D1-004-911-010 | Southco | These versatile economical quarter turn fasteners for high-volume light-duty applications provide a low installed cost attractive aesthetics and more generous tolerance ranges than other quarter turn fasteners. Built-in detents indicate full engagement | 0 | |||
| 20591175 | Essentra Components | 90X50MM RECT2-4.5MMWT TUBE INS | 0 | |||
| MR-91-102-70 | Southco | MR-91-102-70 | 0 | |||
| 14-10-91-11 | Southco | Just a fraction of a turn on a hand-actuated knob style or a tool-actuated style is all it takes to engage or disengage firm compressive action that reduces panel vibration and noise. The pawl rides smoothly on a threaded screw mechanism to provide quick | 0 | |||
| 1191-12CN1500 | HeliCoil | INS H-C 3/4-16UNF F/R | 0 | |||
![]() EBV Elektronik | IRFL9110TRPBF-BE3 | Vishay Intertechnologies | MOSFET PCHANNEL 100V (Alt: IRFL9110TRPBF-BE3) RoHS : Compliant | 285,000 | ||
| RN2911,LXHF(CT | Toshiba America Electronic Components | Transistor Digital BJT PNP 50V 100mA 6Pin SOT363 (Alt: RN2911,LXHF(CT) RoHS : Compliant | 114,000 | |||
BD911![]() | STMicroelectronics | Trans GP BJT NPN 100V 15A 3Pin3Tab TO220 Tube (Alt: BD911) RoHS : Compliant | 12,500 | |||
| TSL25911FN | ams OSRAM Group | LighttoDigital Converter 27 V to 36 V 6 Pins DFN (Alt: Q65114A0923) RoHS : Compliant | 3,500 | |||
| MCP19111T-E/MQ | Microchip Technology Inc | Digitally Enhanced Power Analog Controller 28Pin QFN EP TR (Alt: MCP19111T-E/MQ) RoHS : Compliant | 3,300 | |||
| MCP3911A0T-E/ML | Microchip Technology Inc | Analog Front End IC 2 Channels 24 bit SPI 27 V to 36 V 20 Pins PQFNEP (Alt: MCP3911A0T-E/ML) RoHS : Compliant | 3,300 | |||
| MCP3911A0T-E/MLV02 | Microchip Technology Inc | Analog Front End 125 ksps 214 Bits SPI 2 Channels 27 V to 36 V 20 Pins QFNEP (Alt: MCP3911A0T-E/MLV02) RoHS : Compliant | 3,300 | |||
IRFR9110PBF![]() | Vishay Intertechnologies | MOSFET PCHANNEL 100V (Alt: IRFR9110PBF) RoHS : Compliant | 1,575 | |||
| IRFU9110PBF | Vishay Intertechnologies | (Alt: IRFU9110PBF) RoHS : Compliant | 525 | |||
| SY89112UMY | Microchip Technology Inc | (Alt: SY89112UMY) RoHS : Compliant | 0 | |||
LAN9118-MT![]() | Microchip Technology Inc | Ethernet CTLR Single Chip 10Mbps100Mbps 33V 100Pin TQFP (Alt: LAN9118-MT) RoHS : Compliant | 0 | |||
| VS-VSKL91/12 | Vishay Intertechnologies | (Alt: VS-VSKL91/12) RoHS : Compliant | 0 | |||
| CY7B9911V-5JXC | Infineon Technologies AG | Zero Delay Programmable PLL Clock Buffer Single 15MHz to 110MHz 32Pin PLCC (Alt: SP005644557) RoHS : Compliant | 0 | |||
| MIMX9111CVXXJBB | NXP Semiconductors | (Alt: MIMX9111CVXXJBB) RoHS : Compliant | 0 | |||
| MCP3911A0T-E/MLV01 | Microchip Technology Inc | 33V TwoChannel Analog Front End (Alt: MCP3911A0T-E/MLV01) RoHS : Compliant | 0 | |||
![]() ECCO | 10-825809-11S | Amphenol Industrial Operations |
| 431 | ||
| 10-821269-11S | Amphenol Industrial Operations |
| 150 | |||
| 10-825591-16S | Amphenol Industrial Operations |
| 50 | |||
| A850491115W | Amphenol PCD |
| 19 | |||
| M85049/11-15W | Amphenol PCD |
| 19 | |||
| M8372359112AR | Amphenol PCD |
| 15 | |||
| JANM83723/59-112AR | Amphenol PCD |
| 15 | |||
| JANM83723/59-118AR | Amphenol PCD |
| 8 | |||
| M8372359118AR | Amphenol PCD |
| 8 | |||
| M85049/11-26N | Amphenol PCD |
| 2 | |||
| A850491126N | Amphenol PCD |
| 2 | |||
![]() Maritex | ADA4891-1ARJZ-R7![]() | Analog Devices Inc | Operational Amplifiers; ADA4891-1ARJZ-R7; ANALOG DEVICES; 3.1 mV; 1; 4.4 mA; -88 dB RoHS : Compliant |
| 23,420 | |
| 9111-4524A1C10D | Oupiin | Male Connector; type HDM 2.00mm; 24 pins; right angle |
| 14,167 | ||
| ULO-PH409-1*1SF11 | ULO | Pin Header; pitch 2.54mm; 1x1 pins; assembly: THT; male; straight; single row ; 3.0/2.54/6.0 mm |
| 12,349 | ||
| CJ9113T6A | Changjiang Electronics Tech (CJ) | Converter DC/DC; boost; Vout: 1.8-5.5V; Vin: 0.65-5.5V; 0.4A; 500kHz; -40+85 deg.C; SMD; SOT23-6L |
| 3,000 | ||
TSV911AIYLT![]() | STMicroelectronics | Operational Amplifiers; TSV911AIYLT; STMICROELECTRONICS; 3 mV; 5; 6 V; 1 RoHS : Compliant |
| 2,640 | ||
PUMH9,115![]() | Nexperia | Bipolar Transistors (BJT); PUMH9,115; NEXPERIA; NPN; 50 V; 100 mA; 6 RoHS : Compliant |
| 2,202 | ||
TLC59116IPWR![]() | Texas Instruments | LED Drivers; TLC59116IPWR; TEXAS INSTRUMENTS; 28; 5.5 V; 16; 3 V RoHS : Compliant |
| 2,082 | ||
| CRFW8J0911A50 | Royal Electronic Factory (Thailand) Co Ltd | Carbon film fixed resistor; 910 Ohm; 5%; 1/8W |
| 1,900 | ||
| 9111-4124AC10D | Oupiin | Male Connector; type HDM 2.00mm; 24 pins; straight RoHS : Compliant |
| 1,553 | ||
BD911![]() | STMicroelectronics | Bipolar Transistors (BJT); BD911; STMICROELECTRONICS; NPN; 100 V; 15 A; 3 RoHS : Compliant |
| 1,014 | ||
BST39,115![]() | Nexperia | Bipolar Transistors (BJT); BST39,115; NEXPERIA; NPN; 3 RoHS : Compliant |
| 369 | ||
TLC59116FIRHBR![]() | Texas Instruments | LED Drivers; TLC59116FIRHBR; TEXAS INSTRUMENTS; 32; 5.5 V; 16; 3 V RoHS : Compliant |
| 294 | ||
| PDN4911S | POTENS-SEMI | Transistor: P-MOSFET; unipolar; -40V; -2.9A; 68mohm; 1W; -55+150 st.C; SMD; SOT23 |
| 136 | ||
ADA4891-1ARZ-R7![]() | Analog Devices Inc | Operational Amplifiers; ADA4891-1ARZ-R7; ANALOG DEVICES; 10 mV; 1; 4.4 mA; -88 dB RoHS : Compliant |
| 125 | ||
| CB91102V100 | Cvilux Corporation | Female header; double row, 2*5 contacts, 2.54mm pitch, THT; straigh RoHS : Compliant |
| 100 | ||
![]() Pasternack Enterprises US | PE39114-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: MMCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MMCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG179B/U, RF Cable Type: RG179, RF Cable Impedance: 75 Ohm, Length, Max: 24 inches. MMCX Plug Right Angle to MMCX Plug Right Angle Cable 24 Inch Length Using 75 Ohm RG179 Coax., Radio frequency assembly MMCX plug right angle to MMCX plug right angle cable 24 inch length using 75 Ohm RG179 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The MMCX plug right angle to MMCX plug right angle cable 24 inch length using 75 Ohm RG179 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MMCX to MMCX cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle MMCX cable connection on one end and a right angle MMCX cable connection on the other. Our right angle MMCX to right angle MMCX cable assembly has a plug gender on end 1 and a plug on end 2. PE39114-24 can also be known as a right angle MMCX male to right angle MMCX male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. Our PE39114-24 RF cable has a FEP jacket of 0.100-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 155 degrees C. The flexible RF cable has an in-series connection. Our right angle MMCX plug to right angle MMCX plug cable has a maximum VSWR of 1.4:1. MMCX male to MMCX male cable assembly PE39114-24 is built with RG179 which is a flexible coax type. The Pasternack flexible MMCX cable assembly is manufactured with right angle MMCX to right angle MMCX cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. MMCX right angle male to MMCX right angle male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MMCX to MMCX cable assembly for quick shipment worldwide. Variations of MMCX cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MMCX to MMCX RF cable assembly as per your requirements. |
| 1,504 | |
| PE35911/HS-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. Reverse Polarity SMA Male Right Angle to SMA Male Cable 36 Inch Length Using RG142 Coax with HeatShrink., Radio frequency assembly reverse polarity SMA male right angle to SMA male cable 36 inch length using RG142 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Reverse polarity SMA male right angle to SMA male cable 36 inch length using RG142 coax with heatshrink, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle reverse polarity SMA cable connection on one end and SMA cable connection on the other. Our right angle reverse polarity SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. This reverse polarity SMA to SMA cable is a male to male coax assembly, PE35911/HS-36, can also be known as a right angle reverse polarity SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. Reverse polarity SMA plug to SMA plug cable assembly PE35911/HS-36 is built with RG142 which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this reverse polarity SMA right angle male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE35911/HS-36 can also be used in the other direction and will be SMA male to right angle reverse polarity SMA male cable assembly if the opposite connectivity is required. SMA reverse polarity right angle plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity SMA male right angle to SMA male cable 36 inch length using RG142 coax with heatshrink. |
| 559 | ||
| PE3C3091-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. BNC Male to BNC Male Cable 12 Inch Length Using RG178 Coax., Radio frequency assembly BNC male to BNC male cable 12 inch length using RG178 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC male to BNC male cable 12 inch length using RG178 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a BNC cable connection on one end and a BNC cable connection on the other. Our BNC to BNC cable assembly has a male gender on end 1 and a male on end 2. PE3C3091-12 can also be known as a BNC plug to BNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.393-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C3091-12 RF cable has a FEP jacket of 0.072-inch diameter. The flexible RF cable has an in-series connection. BNC plug to BNC plug cable assembly PE3C3091-12 is built with RG178 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. BNC plug to BNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC RF cable assembly as per your requirements. |
| 278 | ||
| PE9112 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Impedance 1: 50 Ohm, Connector Series 2: UHF, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Impedance 2: 50 Ohm, Frequency, Min: DC, Frequency, Max: 300 MHz, Adapter Body Style: Straight, Connector Mount Method 1: None, Connector Mount Method 2: None, Connector Body Material 2: Brass, Connector Body Plating 2: Nickel. N Female to UHF Male Adapter. Type N adapter PE9112 is one of over 40,000 available RF, microwave and millimeter wave components from Pasternack. Our type N to UHF adapter is a between series coaxial adapter design. This 50 Ohm type N adapter is precision manufactured to RF components industry specifications and has a maximum frequency of 300 MHz. Type N female to UHF male adapter is one of the many RF components that ship same day as they are ordered. PE9112 female N type to male UHF adapter has a straight body. This Pasternack straight N type coax adapter is a in-line RF adapter. Our female type N to male UHF adapter PE9112 is shipped from our facility certified to ISO 9001:2015 the same day as purchased. This type N to UHF radio frequency adapter is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. |
| 220 | ||
| PE3C8491-150CM | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPF-250, RF Cable Type: SPF-250, RF Cable Impedance: 50 Ohm, Length: 59.05 inches. Fire Rated N Male to N Female Low PIM Cable 150 CM Length Using SPF-250 Coax Using Times Microwave Parts., Radio frequency assembly fire rated N male to N female low PIM cable 150 cm length using SPF-250 coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Fire rated N male to N female low PIM cable 150 cm length using SPF-250 coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with type N cable connection on one end and N type cable connection on the other. Our low PIM type N to type N cable assemblies have a male gender on end 1 and female on end 2. This type N to type N cable is a male to female coax assembly, PE3C8491-150CM, can also be known as a low PIM N type plug to type N jack cable assembly and will be shipped same-day as it is purchased. N type plug to type N jack cable assembly PE3C8491-150CM is built with SPF-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated N cable assembly is manufactured with N type to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM type N male to N type female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8491-150CM can also be used in the other direction and will be type N female to type N male cable assembly if the opposite connectivity is required. Low PIM type N plug to N type jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this fire rated N male to N female low PIM cable 150 cm length using SPF-250 coax using Times Microwave parts. |
| 84 | ||
| PE91177 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Impedance 2: 50 Ohm, Frequency, Min: DC, Frequency, Max: 6 GHz, Adapter Body Style: Straight, Connector Mount Method 1: None, Connector Body Material 1: Brass, Connector Body Plating 1: Tri-Metal, Connector Mount Method 2: None. Low PIM N Male to SMA Female Adapter. Type N adapter PE91177 is one of over 40,000 available RF, microwave and millimeter wave components from Pasternack. Our type N to SMA adapter is a between series coaxial adapter design. This 50 Ohm type N adapter is precision manufactured to RF components industry specifications and has a maximum frequency of 6 GHz. N type male to SMA female adapter is one of the many RF components that ship same day as they are ordered. PE91177 male type N to female SMA adapter has a straight body. This Pasternack straight type N coax adapter is a in-line RF adapter. Our male type N to female SMA adapter PE91177 is shipped from our facility certified to ISO 9001:2015 the same day as purchased. This N type to SMA radio frequency adapter is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. |
| 55 | ||
| PE3C6191-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 12 inches. Plenum 7/16 DIN Male to N Female Bulkhead Low PIM Cable 12 Inch Length Using SPP-250-LLPL Coax Using Times Microwave Parts., Radio frequency assembly plenum 7/16 DIN male to N female bulkhead low PIM cable 12 inch length using SPP-250-LLPL coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum 7/16 DIN male to N female bulkhead low PIM cable 12 inch length using SPP-250-LLPL coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-SPP250-716M-LP 7/16 DIN to TC-SPP250-NF-BH-LP type N cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-SPP250-716M-LP 7/16 DIN cable connection on one end and TC-SPP250-NF-BH-LP type N bulkhead cable connection on the other. Our low PIM TC-SPP250-716M-LP 7/16 DIN to TC-SPP250-NF-BH-LP N type cable assemblies have a male gender on end 1 and female on end 2. This TC-SPP250-716M-LP 7/16 DIN to TC-SPP250-NF-BH-LP type N cable is a male to female coax assembly, PE3C6191-12, can also be known as a low PIM TC-SPP250-716M-LP 7/16 DIN plug to TC-SPP250-NF-BH-LP type N jack cable assembly and will be shipped same-day as it is purchased. TC-SPP250-716M-LP 7/16 DIN plug to TC-SPP250-NF-BH-LP N type jack cable assembly PE3C6191-12 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-SPP250-716M-LP 7/16 DIN cable assembly is manufactured with TC-SPP250-716M-LP 7/16 DIN to TC-SPP250-NF-BH-LP N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-SPP250-716M-LP 7/16 DIN male to TC-SPP250-NF-BH-LP type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6191-12 can also be used in the other direction and will be TC-SPP250-NF-BH-LP type N female bulkhead to TC-SPP250-716M-LP 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM TC-SPP250-716M-LP 7/16 DIN plug to TC-SPP250-NF-BH-LP type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-SPP250-716M-LP 7/16 DIN to TC-SPP250-NF-BH-LP N type cable assembly for quick shipment worldwide. Variations of TC-SPP250-716M-LP 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 7/16 DIN male to N female bulkhead low PIM cable 12 inch length using SPP-250-LLPL coax using Times Microwave parts. |
| 42 | ||
| PE3C6191-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 39.3701 inches. Plenum 7/16 DIN Male to N Female Bulkhead Low PIM Cable 100 cm Length Using SPP-250-LLPL Coax Using Times Microwave Parts., Radio frequency assembly plenum 7/16 DIN male to N female bulkhead low PIM cable 100 cm length using SPP-250-LLPL coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum 7/16 DIN male to N female bulkhead low PIM cable 100 cm length using SPP-250-LLPL coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-SPP250-716M-LP 7/16 DIN to TC-SPP250-NF-BH-LP N type cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-SPP250-716M-LP 7/16 DIN cable connection on one end and TC-SPP250-NF-BH-LP type N bulkhead cable connection on the other. Our low PIM TC-SPP250-716M-LP 7/16 DIN to TC-SPP250-NF-BH-LP type N cable assemblies have a male gender on end 1 and female on end 2. This TC-SPP250-716M-LP 7/16 DIN to TC-SPP250-NF-BH-LP type N cable is a male to female coax assembly, PE3C6191-100CM, can also be known as a low PIM TC-SPP250-716M-LP 7/16 DIN plug to TC-SPP250-NF-BH-LP type N jack cable assembly and will be shipped same-day as it is purchased. TC-SPP250-716M-LP 7/16 DIN plug to TC-SPP250-NF-BH-LP N type jack cable assembly PE3C6191-100CM is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-SPP250-716M-LP 7/16 DIN cable assembly is manufactured with TC-SPP250-716M-LP 7/16 DIN to TC-SPP250-NF-BH-LP type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-SPP250-716M-LP 7/16 DIN male to TC-SPP250-NF-BH-LP type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6191-100CM can also be used in the other direction and will be TC-SPP250-NF-BH-LP N type female bulkhead to TC-SPP250-716M-LP 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM TC-SPP250-716M-LP 7/16 DIN plug to TC-SPP250-NF-BH-LP type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-SPP250-716M-LP 7/16 DIN to TC-SPP250-NF-BH-LP N type cable assembly for quick shipment worldwide. Variations of TC-SPP250-716M-LP 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 7/16 DIN male to N female bulkhead low PIM cable 100 cm length using SPP-250-LLPL coax using Times Microwave parts. |
| 42 | ||
| PE91140 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Impedance 2: 50 Ohm, Frequency, Min: DC, Frequency, Max: 6 GHz, Adapter Body Style: Straight, Connector Mount Method 1: None, Connector Mount Method 2: None. Low PIM N Female to N Female Adapter, With Body Flats. Type N adapter PE91140 is one of over 40,000 available RF, microwave and millimeter wave components from Pasternack. Our type N to type N adapter is a in-series coaxial adapter design. This 50 Ohm type N adapter is precision manufactured to RF components industry specifications and has a maximum frequency of 6 GHz. Type N female to type N female adapter is one of the many RF components that ship same day as they are ordered. PE91140 female N type to female N type adapter has a straight body. This Pasternack straight N type coax adapter is a in-line RF adapter. Our female type N to female type N adapter PE91140 is shipped from our facility certified to ISO 9001:2015 the same day as purchased. This with body flats type N to type N radio frequency adapter is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. |
| 20 | ||
| PE3W19119/HS | Pasternack Enterprises | 0 | ||||
| PE91171 | Pasternack Enterprises | Key Specifications, Connector Series 1: 3.5mm, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Impedance 1: 50 Ohm, Connector Series 2: 3.5mm, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Impedance 2: 50 Ohm, Frequency, Min: DC, Frequency, Max: 34.5 GHz, Adapter Body Style: Right Angle, Connector Mount Method 1: None, Connector Body Material 1: Passivated Stainless Steel, Connector Mount Method 2: None, Connector Body Material 2: Passivated Stainless Steel. 3.5mm Female to 3.5mm Female Right Angle Adapter. 3.5mm adapter PE91171 is one of over 40,000 available RF, microwave and millimeter wave components from Pasternack. Our 3.5mm to 3.5mm adapter is a in-series coaxial adapter design. This 50 Ohm 3.5mm adapter is precision manufactured to RF components industry specifications and has a maximum frequency of 34.5 GHz. 3.5mm female to 3.5mm female adapter is one of the many RF components that ship same day as they are ordered. PE91171 female 3.5mm to female 3.5mm adapter has a right angle body. This Pasternack right angle 3.5mm coax adapter is a 90 degree right angle RF elbow adapter. Our female 3.5mm to female 3.5mm adapter PE91171 is shipped from our facility certified to ISO 9001:2015 the same day as purchased. This 3.5mm to 3.5mm radio frequency adapter is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. |
| 0 | ||
| PE34491-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-B100, RF Cable Type: PE-B100, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMB Plug to SMB Jack Bulkhead Cable 12 Inch Length Using PE-B100 Coax., Radio frequency assembly SMB plug to SMB jack bulkhead cable 12 inch length using PE-B100 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMB plug to SMB jack bulkhead cable 12 inch length using PE-B100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMB to SMB cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMB cable connection on one end and SMB bulkhead cable connection on the other. Our SMB to SMB cable assemblies have a plug gender on end 1 and jack on end 2. This SMB to SMB cable is a plug to jack coax assembly, PE34491-12, can also be known as a SMB male to SMB female cable assembly and will be shipped same-day as it is purchased. SMB male to SMB female cable assembly PE34491-12 is built with PE-B100 which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with SMB to SMB cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency SMB plug to SMB jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34491-12 can also be used in the other direction and will be SMB jack bulkhead to SMB plug cable assembly if the opposite connectivity is required. SMB male to SMB female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMB to SMB cable assembly for quick shipment worldwide. Variations of SMB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMB plug to SMB jack bulkhead cable 12 inch length using PE-B100 coax. |
| 0 | ||
| PE3W08911 | Pasternack Enterprises | Key Specifications, Connector Series 1: MMCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm. MMCX Plug Right Angle to MCX Jack Bulkhead Cable Using RG316-DS Coax. PE3W08911 is a MMCX plug right angle to MCX jack bulkhead cable using RG316-DS coax. This Pasternack MMCX plug right angle to MCX jack bulkhead cable assembly uses a 50 Ohm MMCX for connector 1 and a 50 Ohm MCX for connector 2. MMCX right angle to MCX coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug MMCX right angle to jack MCX bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W08911 MMCX plug right angle to MCX jack bulkhead cable assembly is constructed with RG316-DS coax. | 0 | |||
| PE3W03991-150CM | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length: 59.06 inches. N Male Right Angle to N Female Bulkhead Cable 150 cm Length Using LMR-400 Coax., Radio frequency assembly N male right angle to N female bulkhead cable 150 cm length using LMR-400 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male right angle to N female bulkhead cable 150 cm length using LMR-400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle type N cable connection on one end and N type bulkhead cable connection on the other. Our right angle type N to type N cable assemblies have a male gender on end 1 and female on end 2. This type N to N type cable is a male to female coax assembly, PE3W03991-150CM, can also be known as a right angle type N plug to type N jack cable assembly and will be shipped same-day as it is purchased. N type plug to type N jack cable assembly PE3W03991-150CM is built with LMR-400 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with right angle type N to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency N type right angle male to N type female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W03991-150CM can also be used in the other direction and will be type N female bulkhead to right angle type N male cable assembly if the opposite connectivity is required. Type N right angle plug to type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male right angle to N female bulkhead cable 150 cm length using LMR-400 coax. |
| 0 | ||
| PE3W22911 | Pasternack Enterprises | Key Specifications, Connector Series 1: NEX10, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm. NEX10 Female Bulkhead to SMA Female Cable Using 1/4 inch Superflexible Coax. PE3W22911 is a NEX10 female bulkhead to SMA female cable using 1/4" Superflexible coax. This Pasternack NEX10 female bulkhead to SMA female cable assembly uses a 50 Ohm NEX10 for connector 1 and a 50 Ohm SMA for connector 2. Our female NEX10 bulkhead to female SMA cable assembly uses a corrugated cable type that is 50 Ohm. Pasternack PE3W22911 NEX10 female bulkhead to SMA female cable assembly is constructed with 1/4" Superflexible coax. | 0 | |||
![]() Teledyne HiRel | 5962-8983911RA![]() | Teledyne HiRel | PROG. LOGIC DEVICE, ELECTR. ERASABLE, 16-INPUT 8-OUTPUT RoHS : Not Compliant | 0 | ||
5962-89839112A![]() | Teledyne HiRel | PROG. LOGIC DEVICE, ELECTR. ERASABLE, 16-INPUT 8-OUTPUT RoHS : Not Compliant | 0 | |||
![]() Wuhan P&S | 59453-091110EDHLF | Amphenol FCi | FFC/FPC CONN,9P,0.5mm,Lower Contact,ZIF RoHS : Compliant |
| 80,000 | |
TSV911AILT![]() | STMicroelectronics | RoHS : Compliant |
| 100 | ||
| ST25R3911B-DISCO | STMicroelectronics | Discovery kit for ST25R3911B High Performance HF Reader/NFC Initiator with 1.4 W Output Power,VHBR and AAT |
| 3 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |