904L-AL6-R Price, Distributor, Stock

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm. N Male to N Male Right Angle Low Loss Cable Using LMR-240 Coax with Times Microwave Components., Radio frequency assembly N male to N male right angle low loss cable using LMR-240 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male right angle low loss cable using LMR-240 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a right angle type N cable connection on the other. Our low loss type N to right angle type N cable assembly has a male gender on end 1 and a male on end 2. PE3C9904 can also be known as a low loss type N plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C9904 RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our type N male to right angle type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3C9904 is built with LMR-240 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to right angle type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C9904 can also be used in the other direction and will be a right angle type N male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

205

PE3C9904-60

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Male to N Male Right Angle Low Loss Cable 60 Inch Length Using LMR-240 Coax with Times Microwave Components., Radio frequency assembly N male to N male right angle low loss cable 60 inch length using LMR-240 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male right angle low loss cable 60 inch length using LMR-240 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a right angle type N cable connection on the other. Our low loss type N to right angle type N cable assembly has a male gender on end 1 and a male on end 2. PE3C9904-60 can also be known as a low loss type N plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C9904-60 RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our type N male to right angle type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3C9904-60 is built with LMR-240 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to right angle type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C9904-60 can also be used in the other direction and will be a right angle type N male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $100.99
25 : $95.94
50 : $90.89
100 : $86.85

PE3490-48

Pasternack Enterprises

Key Specifications, Connector Series 1: SMC, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMC, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Length: 48 inches. SMC Plug to SMC Plug Cable 48 Inch Length Using RG142 Coax., Radio frequency assembly SMC plug to SMC plug cable 48 inch length using RG142 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMC plug to SMC plug cable 48 inch length using RG142 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMC to SMC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMC cable connection on one end and SMC cable connection on the other. Our SMC to SMC cable assemblies have a plug gender on end 1 and plug on end 2. This SMC to SMC cable is a plug to plug coax assembly, PE3490-48, can also be known as a SMC male to SMC male cable assembly and will be shipped same-day as it is purchased. SMC male to SMC male cable assembly PE3490-48 is built with RG142 which is a flexible coax type. The Pasternack flexible SMC cable assembly is manufactured with SMC to SMC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SMC plug to SMC plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMC male to SMC male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMC to SMC cable assembly for quick shipment worldwide. Variations of SMC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMC plug to SMC plug cable 48 inch length using RG142 coax.

1 : $149.99
25 : $142.49
50 : $134.99
100 : $128.99

PE11S3904

Pasternack Enterprises

Key Specifications, Design: USB, Mode: Integer/Fractional, Reference: Internal (External Optional), Min Frequency: 21 GHz, Max Frequency: 24 GHz, Supply Current 1, Typ: 470 mA, Output Power, Min: -17 dBm, Control/Tuning Interface: USB, Package Family (PCB, Coaxial): Coaxial, Reference Input Connector Series: MMCX, Reference Input Connector Gender: Female. USB PLL Frequency Synthesizer, 21 GHz - 24 GHz, -17 dBm Pout, 50 MHz Reference and SMA output., Pasternack's PE11S3904 RF frequency Synthesizer module Phase Locked Loop (PLL) operates on the frequency range from 21 GHz to 24 GHz. With pout of > -17 dBm this RF synthesizer includes USB 2.0 interface that is powered and command controlled directly by a host PC and a SMA Female output connector. The PLL USB Frequency Synthesizer with Phase Lock Indicator is VISA compliant which enables seamless cross platform use. The USB Type A - Male connector is used for both Power and Control and the synthesizer can be GUI managed via Windows®, Macintosh®, or Linux® platforms, or with SCPI compliant VISA commands (downloadable user manual), or with other system design software such as LabVIEW®. This high quality USB synthesizer has a Phase Noise of -88 dBc/Hz @ 100kHz offset. Pasternack offers a line of experts who can assist you with technical support for your PLL SMA Female RF frequency Synthesizer module or any other rf frequency synthesizer in our inventory. Contact our USB synthesizer technical experts or download the PE11S3904 pdf technical data sheet for frequency synthesizer circuit CAD drawing, functional block diagram, and typical performance data. Manufactured to the highest international standards your PE11S3904 USB synthesizer ships same business day of order. Designed with USB control the frequency Synthesizer comes with Coaxial package and supports MMCX Female connectors. The RF Synthesizer Module comes complete with a USB Type A - Male and an SMA to MMCX plug cable. The module operates across a wide temperature range of 0°C to 55°C Pasternack's USB frequency Synthesizer specialists are on the line and ready to help you with any inquiries you may have on the 21 GHz to 24 GHz -17dBm Synthesizer. Order your USB Phase Lock Indicator, 21 GHz to 24 GHz, -17dBm Pout, with 50MHz Internal (External Optional) Reference, -88 dBc/Hz Phase Noise, MMCX Female Divider Out Connector RF frequency synthesizer today. There is no MOQ (minimum order quantity) and the PE11S3904 RF frequency Synthesizer ships same day from our warehouse.

1 : $4,700.0
5 : $4,512.0
10 : $4,324.0

PE3C6904

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-DB, RF Cable Type: LMR-400-DB, RF Cable Impedance: 50 Ohm.

PE3C9046

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402AL, RF Cable Type: PE-SR402AL, RF Cable Impedance: 50 Ohm. N Male Right Angle to N Female Cable Using PE-SR402AL Coax. PE3C9046 is a N male right angle to N female cable using PE-SR402AL coax. This Pasternack N male right angle to N female cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. N right angle to N coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N right angle to female N cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3C9046 N male right angle to N female cable assembly is constructed with PE-SR402AL coax.

PE39049

Pasternack Enterprises

PE3C9490-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: SHV, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SHV, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tinned Copper, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. SHV Jack to SHV Jack Cable 48 Inch Length Using RG58 Coax., Radio frequency assembly SHV jack to SHV jack cable 48 inch length using RG58 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SHV jack to SHV jack cable 48 inch length using RG58 coax, SHV cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SHV to SHV cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SHV cable connection on one end and SHV cable connection on the other. Our SHV to SHV cable assemblies have a jack gender on end 1 and jack on end 2. PE3C9490-48 can also be known as a SHV female to SHV female cable assembly and will be shipped same-day as it is purchased. SHV female to SHV female cable assembly PE3C9490-48 is built with RG58 which is a flexible coax type. The Pasternack flexible SHV cable assembly is manufactured with SHV to SHV cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 300 MHz maximum frequency SHV jack to SHV jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SHV female to SHV female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SHV to SHV cable assembly for quick shipment worldwide. Variations of SHV cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SHV jack to SHV jack cable 48 inch length using RG58 coax.

1 : $151.99
25 : $144.39
50 : $136.79
100 : $130.71

PE3MSA00590-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 78 Ohm, Connector 2 Series: Blunt Cut, Connector 2 Gender: Genderless, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: TWCH-78-2, RF Cable Type: TWCH-78-2, RF Cable Impedance: 78 Ohm, Length, Max: 48 inches. Lead Free LSZH 3-Lug TRB Bulkhead Insulated Jack with Blunt Cut for 78 Ohm TWCH-78-2, 48" Cable., Radio frequency assembly lead free LSZH 3-Lug TRB bulkhead insulated jack with blunt cut for 78 Ohm TWCH-78-2, 48" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Lead free LSZH 3-Lug TRB bulkhead insulated jack with blunt cut for 78 Ohm TWCH-78-2, 48" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to blunt cut cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB bulkhead cable connection on one end and blunt cut cable connection on the other. Our 1553 TRB to blunt cut cable assemblies have a jack gender on end 1 and genderless on end 2. PE3MSA00590-48 can also be known as a 1553 TRB female to blunt cut genderless cable assembly and will be shipped same-day as it is purchased. TRB female to blunt cut genderless cable assembly PE3MSA00590-48 is built with TWCH-78-2 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to blunt cut cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRB jack bulkhead to blunt cut genderless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MSA00590-48 can also be used in the other direction and will be blunt cut genderless to TRB jack bulkhead cable assembly if the opposite connectivity is required. 1553 TRB female bulkhead to blunt cut genderless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to blunt cut cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this lead free LSZH 3-Lug TRB bulkhead insulated jack with blunt cut for 78 Ohm TWCH-78-2, 48" cable.

1 : $335.99
25 : $319.19
50 : $302.39
100 : $288.95

PE3W24904

Pasternack Enterprises

Key Specifications, Connector Series 1: 2.92mm, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P086HF, RF Cable Type: PE-P086HF, RF Cable Impedance: 50 Ohm. 2.92mm Female Bulkhead to Push-On SMP Female Cable Using PE-P086HF Coax. PE3W24904 is a 2.92mm female bulkhead to SMP female cable using PE-P086HF coax. This Pasternack 2.92mm female bulkhead to SMP female cable assembly uses a 50 Ohm 2.92mm for connector 1 and a 50 Ohm SMP for connector 2. Our female 2.92mm bulkhead to female SMP cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W24904 2.92mm female bulkhead to SMP female cable assembly is constructed with PE-P086HF coax.

PE3C9048

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402AL, RF Cable Type: PE-SR402AL, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to SMA Female 4 Hole Flange Cable Using PE-SR402AL Coax. PE3C9048 is a SMA male right angle to SMA female 4 hole flange cable using PE-SR402AL coax. This Pasternack SMA male right angle to SMA female 4 hole flange cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. SMA right angle to SMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to female SMA 4 hole flange cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3C9048 SMA male right angle to SMA female 4 hole flange cable assembly is constructed with PE-SR402AL coax.

PE3W09040LF/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMC, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. TNC Female Bulkhead to SSMC Plug Cable Using RG174 Coax with HeatShrink, LF Solder. PE3W09040LF/HS is a TNC female bulkhead to SSMC plug cable using RG174 coax. This Pasternack TNC female bulkhead to SSMC plug cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm SSMC for connector 2. Our female TNC bulkhead to plug SSMC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W09040LF/HS TNC female bulkhead to SSMC plug cable assembly is constructed with RG174 coax.

PE3W13904/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-FR, RF Cable Type: LMR-240-FR, RF Cable Impedance: 50 Ohm. BNC Male to BNC Male Cable Using LMR-240-FR Coax with HeatShrink. PE3W13904/HS is a BNC male to BNC male cable using LMR-240-FR coax. This Pasternack BNC male to BNC male cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm BNC for connector 2. Our male BNC to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W13904/HS BNC male to BNC male cable assembly is constructed with LMR-240-FR coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W19904

Pasternack Enterprises

Key Specifications, Connector Series 1: SSMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. SSMB Plug Right Angle to SSMB Plug Right Angle Cable Using RG174 Coax. PE3W19904 is a SSMB plug right angle to SSMB plug right angle cable using RG174 coax. This Pasternack SSMB plug right angle to SSMB plug right angle cable assembly uses a 50 Ohm SSMB for connector 1 and a 50 Ohm SSMB for connector 2. SSMB right angle to SSMB right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug SSMB right angle to plug SSMB right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W19904 SSMB plug right angle to SSMB plug right angle cable assembly is constructed with RG174 coax.

PE3C8290-48

Pasternack Enterprises

Key Specifications, Connector Series 1: 4.1/9.5 Mini DIN, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length: 48 inches. 4.1/9.5 Mini DIN Female to N Male Right Angle Low PIM Cable 48 Inch Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 4.1/9.5 mini DIN female to N male right angle low PIM cable 48 inch length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 4.1/9.5 mini DIN female to N male right angle low PIM cable 48 inch length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.1/9.5 mini DIN to type N cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.1/9.5 mini DIN cable connection on one end and right angle N type cable connection on the other. Our low PIM 4.1/9.5 mini DIN to right angle type N cable assemblies have a female gender on end 1 and male on end 2. This 4.1/9.5 mini DIN to N type cable is a female to male coax assembly, PE3C8290-48, can also be known as a low PIM 4.1/9.5 mini DIN jack to right angle type N plug cable assembly and will be shipped same-day as it is purchased. 4.1/9.5 mini DIN jack to type N plug cable assembly PE3C8290-48 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.1/9.5 Mini DIN cable assembly is manufactured with 4.1/9.5 mini DIN to right angle type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency low PIM 4.1/9.5 mini DIN female to N type right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8290-48 can also be used in the other direction and will be right angle type N male to 4.1/9.5 mini DIN female cable assembly if the opposite connectivity is required. Low PIM 4.1/9.5 mini DIN jack to type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.1/9.5 mini DIN to type N cable assembly for quick shipment worldwide. Variations of 4.1/9.5 mini DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 4.1/9.5 mini DIN female to N male right angle low PIM cable 48 inch length using TFT-5G-402 coax using Times Microwave components.

1 : $87.79
25 : $83.4
50 : $79.01
100 : $75.5

Teledyne HiRel

M38510/30904B2A

Teledyne HiRel

DATA SEL/MULTIPLEXER, QUAD 2-INPUT, WITH ENABLE
RoHS : Not Compliant

M38510/20904BKA

Teledyne HiRel

PROM, 1K X 8, WITH 3-STATE OUTPUTS, 90 NS ACCESS TIME
RoHS : Not Compliant

5962-8866904YA

Teledyne HiRel

FIFO MEMORY, 2K X 9, 40 NS ACCESS TIME
RoHS : Not Compliant

5962-8983904RA

Teledyne HiRel

PROG. LOGIC DEVICE, ELECTR. ERASABLE, 16-INPUT 8-OUTPUT
RoHS : Not Compliant

5962-89839042A

Teledyne HiRel

PROG. LOGIC DEVICE, ELECTR. ERASABLE, 16-INPUT 8-OUTPUT
RoHS : Not Compliant

M38510/28904BVA

Teledyne HiRel

STATIC RAM, 1K X 4, 55 NS ACCESS TIME
RoHS : Not Compliant

5962-87539043A

Teledyne HiRel

PROG. LOGIC DEVICE, UV ERASABLE, 22-INPUT 10-OUTPUT, 20 NS
RoHS : Not Compliant

5962-8753904KA

Teledyne HiRel

PROG. LOGIC DEVICE, UV ERASABLE, 22-INPUT 10-OUTPUT, 20 NS
RoHS : Not Compliant

M38510/33904BFA

Teledyne HiRel

DATA SEL/MULTIPLEXER, QUAD 2-INPUT
RoHS : Not Compliant

M38510/33904BEA

Teledyne HiRel

DATA SEL/MULTIPLEXER, QUAD 2-INPUT
RoHS : Not Compliant

M38510/20904BJA

Teledyne HiRel

PROM, 1K X 8, WITH 3-STATE OUTPUTS, 90 NS ACCESS TIME
RoHS : Not Compliant

5962-8866904UA

Teledyne HiRel

FIFO MEMORY, 2K X 9, 40 NS ACCESS TIME
RoHS : Not Compliant

5962-8873904QA

Teledyne HiRel

MULTIPLIER, 8 X 8 UNSIGNED MAGNITUDE, 50 NS MULTIPLY TIME
RoHS : Not Compliant

5962-8866904XA

Teledyne HiRel

FIFO MEMORY, 2K X 9, 40 NS ACCESS TIME
RoHS : Not Compliant

M38510/30904BEA

Teledyne HiRel

DATA SEL/MULTIPLEXER, QUAD 2-INPUT, WITH ENABLE
RoHS : Not Compliant

Venkel Ltd.

MELFC0207-VK-3904FT

VENKEL LTD

MELF Coated Thin Film CR;0207;1/2W;�100PPM;3.9M;�1%
RoHS : Compliant

PWCR2010-WK-3904FT

VENKEL LTD

Pulse Withstanding CR;2010;3/4W;�100PPM;3.9M;�1%
RoHS : Compliant

PWCR2512-ZK-5904FT

VENKEL LTD

Pulse Withstanding CR;2512;1.5W;�100PPM;5.9M;�1%
RoHS : Compliant

CR0603-10W-5904DT

VENKEL LTD

Chip Resistor;0603;1/10W;5.9M;�0.5%
RoHS : Compliant

CR1210-4W-5904FT

VENKEL LTD

Chip Resistor;1210;1/4W;5.9M;�1%
RoHS : Compliant

CRG0603-Q-3904FT

VENKEL LTD

RoHS 10/10 Green CR;0603;1/10W;3.9M;�1%
RoHS : Compliant

HVCR0805-8W-5904FT

VENKEL LTD

High Voltage CR;0805;1/8W;5.9M;�1%
RoHS : Compliant

MELFC0204-TK-5904FT

VENKEL LTD

MELF Coated Thin Film CR;0204;1/4W;�100PPM;5.9M;�1%
RoHS : Compliant

MELFC0204-TC-5904FT

VENKEL LTD

MELF Coated Thin Film CR;0204;1/4W;�50PPM;5.9M;�1%
RoHS : Compliant

CRG0603-Q-5904FT

VENKEL LTD

RoHS 10/10 Green CR;0603;1/10W;5.9M;�1%
RoHS : Compliant

PWCR2512-ZK-3904DT

VENKEL LTD

Pulse Withstanding CR;2512;1.5W;�100PPM;3.9M;�0.5%
RoHS : Compliant

AGCR1206-TL-3904FT

VENKEL LTD

Auto Grade Resistor;1206;1/4W;�200PPM;3.9M;�1%
RoHS : Compliant

CRG1206-T-3904FT

VENKEL LTD

RoHS 10/10 Green CR;1206;1/4W;3.9M;�1%
RoHS : Compliant

CRG2010-V-5904FT

VENKEL LTD

RoHS 10/10 Green CR;2010;1/2W;5.9M;�1%
RoHS : Compliant

PWCR1210-VK-5904FT

VENKEL LTD

Pulse Withstanding CR;1210;1/2W;�100PPM;5.9M;�1%
RoHS : Compliant

904L-AL6-R Distributor

Link URL