| Electronic Components Datasheet Search |
|
863G-S18-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() ComSIT USA | P56863602 | NEFAB | AVAILABLE EU | 155 | ||
| 6863655001 | ALLTRISTA PLASTICS LLC | AVAILABLE EU | 723 | |||
| PJQ5863AAU | PanJit Semiconductor | AVAILABLE EU | 2,250 | |||
| P56863402 | NEFAB | AVAILABLE EU | 92 | |||
| 742863160 | AVAILABLE EU | 2,314 | ||||
| 6863663001 | ALLTRISTA PLASTICS LLC | AVAILABLE EU | 419 | |||
![]() PUI | 12.88638 | 56,960 | ||||
| 12.88631 | 53,119 | |||||
| 12.88635 | 9,864 | |||||
| 12.89863 | 1,190 | |||||
| 12.88636 | 500 | |||||
| 2386-32X40C3D1LT-S | 200 | |||||
| 12.88639 | 30 | |||||
| 2386-32X60C3D1LT-S | Oupiin | RoHS : Compliant | 24 | |||
| 0218.630VXP | 15 | |||||
![]() Richardson RFPD | 130560-HMC863LP4E | Analog Devices Inc | HMC863LP4E RF Amplifier Evaluation Board RoHS : Compliant | 0 | ||
| SI5381A-E08637-GMR | Skyworks Solutions Inc | Multi DSPLL Wireless Jitter Attenuating Clocks RoHS : Compliant | 0 | |||
| B39212B8637P810 | RF360 Holdings Singapore Pte Ltd | RF Duplexer 2110MHz to 2170MHz 1920MHz to 1980MHz RoHS : Compliant | 0 | |||
| LT8630IFE#TRPBF | Analog Devices Inc | Conv DC-DC 3V to 100V Synchronous Step Down Single RoHS : Compliant |
| 0 | ||
| LT8638SEV#PBF | Analog Devices Inc | Conv DC-DC 2.8V to 42V Synchronous Step Down Singl RoHS : Compliant |
| 0 | ||
| LTC3863MPDE#PBF | Analog Devices Inc | DC/DC Cntrlr Single-OUT Inverting 850kHz 12-Pin DF RoHS : Compliant |
| 0 | ||
| LTC3863MPMSE#PBF | Analog Devices Inc | DC/DC Cntrlr Single-OUT Inverting 850kHz Automotiv RoHS : Compliant |
| 0 | ||
| SI5332FD11863-GM1R | Skyworks Solutions Inc | Clock Generator 10MHz to 250MHz-IN 200MHz-OUT 32-P RoHS : Compliant | 0 | |||
| SI8630EC-B-IS1 | Skyworks Solutions Inc | Digital Isolator CMOS 3-CH 150Mbps 16-Pin SOIC N RoHS : Compliant |
| 0 | ||
| SI8630EC-B-IS1R | Skyworks Solutions Inc | Digital Isolator CMOS 3-CH 150Mbps 16-Pin SOIC N T RoHS : Compliant |
| 0 | ||
| SI8638BT-ISR | Skyworks Solutions Inc | SI8638BT-ISR RoHS : Compliant |
| 0 | ||
| LT8630EFE#PBF | Analog Devices Inc | Conv DC-DC 3V to 100V Synchronous Step Down Single RoHS : Compliant |
| 0 | ||
| LT8637JV#WPBF | Analog Devices Inc | LT8637JV#WPBF RoHS : Compliant |
| 0 | ||
| LTC1863CGN#TRPBF | Analog Devices Inc | 8-Channel Single ADC SAR 200ksps 12-bit Serial Aut RoHS : Compliant |
| 0 | ||
| LTC3863IDE#PBF | Analog Devices Inc | DC/DC Cntrlr Single-OUT Inverting 850kHz 12-Pin D RoHS : Compliant |
| 0 | ||
![]() Rutronik | Q65111A8863 | ams OSRAM Group | IR-EMITTER 3MM 850NM 100mW/sr RoHS : Compliant |
| 20,000 | |
| 863001060TLF | Amphenol Communications Solutions | SCREW LOCK FEMALE TIN 8.30 RoHS : Compliant |
| 18,900 | ||
| 863001TLF | Amphenol Communications Solutions | SCREW LOCK FEMALE TIN 8.30 RoHS : Compliant |
| 16,500 | ||
| 863004ATLF | Amphenol Communications Solutions | SCREW LOCK MALE TIN 4/40 RoHS : Compliant |
| 2,000 | ||
| C10-737486-3YS3 | Amphenol Interconnect Products Inc | 03P EPOWER PLUG FOR 6,0MM CAB RoHS : Compliant |
| 50 | ||
| 2038638103 | Molex | LITE TRAP Contact terminal RoHS : Compliant |
| 20 | ||
| 009176001863906 | Kyocera AVX Components | 01P IDC Connector RoHS : Compliant |
| 10 | ||
![]() Chip 1 Exchange | 1-1827863-4 | TE Connectivity | INSTOCK RoHS : Compliant | 71,310 | ||
| F863BN334K310ALW0L | KEMET Corporation | INSTOCK RoHS : Compliant | 20,125 | |||
| 222278019863- | INSTOCK | 13,662 | ||||
| 504186-3600 | Molex | INSTOCK RoHS : Compliant | 13,000 | |||
| 2213863-4 | TE Connectivity | INSTOCK | 7,410 | |||
| 223886315158 | Texas Instruments | INSTOCK | 3,052 | |||
| 1986370-5 | TE Connectivity | INSTOCK RoHS : Compliant | 1,822 | |||
| 2286369-5 | TE Connectivity | INSTOCK | 1,790 | |||
| 1986370-6 | TE Connectivity | INSTOCK RoHS : Compliant | 1,552 | |||
| AS186-302LF | Skyworks Solutions Inc | INSTOCK RoHS : Compliant | 1,397 | |||
| KSZ8863RLLI | Microchip Technology Inc | INSTOCK RoHS : Compliant | 680 | |||
| SFH6286-3T | Vishay Intertechnologies | INSTOCK RoHS : Compliant | 669 | |||
| 4HLB286-30 / 28.6363MHZ | INSTOCK | 635 | ||||
| SFH6186-3 | INSTOCK | 48 | ||||
| 321863-39 | INSTOCK | 3 | ||||
![]() Avnet Asia | RJE591886301 | Amphenol Corporation | MODULAR JACK - 8P8C, RA, CAT6, THT (Alt: RJE591886301) RoHS : Compliant |
| 2,000 | |
| UE86-3T4620-20361 | Amphenol Corporation | (Alt: UE86-3T4620-20361) RoHS : Compliant | 400 | |||
| 660-8635-001 | Amphenol Corporation | (Alt: 660-8635-001) RoHS : Compliant |
| 300 | ||
| SFH6286-3T | Vishay Intertechnologies | SMD-4 CPLR 100-320% CTR -e3 (Alt: SFH6286-3T) RoHS : Compliant | 0 | |||
| G86304111A1TS1HR | Amphenol Corporation | (Alt: G86304111A1TS1HR) RoHS : Compliant | 0 | |||
| 863001060LF | Amphenol Corporation | (Alt: 863001060LF) RoHS : Compliant | 0 | |||
| G86303111TEU | Amphenol Corporation | PROTECT HEADER P=2.5MM STR,DIP,1X3PIN (Alt: G86303111TEU) RoHS : Compliant | 0 | |||
| 2536863-1 | TE Connectivity | CBAY F0P PCIE BBACC-PISW 3.3V 795 1C TYC (Alt: 2536863-1) RoHS : Compliant | 0 | |||
| ME1016863400701 | Amphenol Corporation | (Alt: ME1016863400701) RoHS : Compliant | 0 | |||
| 661-8635-034 | Amphenol Corporation | (Alt: 661-8635-034) RoHS : Compliant | 0 | |||
| 245863050104829+ | KYOCERA Corporation | (Alt: 245863050104829+) RoHS : Compliant | 0 | |||
| 2486390-3 | TE Connectivity | (Alt: 2486390-3) RoHS : Compliant | 0 | |||
| FDD86369-F085 | onsemi | N-Channel PowerTrench? MOSFET 80 V, 90 A, 7.9 mO (Alt: FDD86369-F085) RoHS : Compliant | 0 | |||
| FCE863RABMD | Quectel Wireless Solutions Co Ltd | (Alt: FCE863RABMD) RoHS : Compliant | 0 | |||
| 1-338086-3 | TE Connectivity | 6/6 MODULAR JACK TOP ENTRY (Alt: 1-338086-3) RoHS : Compliant | 0 | |||
![]() Avnet Silica | FDMS86300 | onsemi | Power MOSFET N Channel 80 V 42 A 00032 ohm Power 56 Surface Mount (Alt: FDMS86300) RoHS : Compliant | 6,000 | ||
| FDS8638 | onsemi | NChannel PowerTrench MOSFET 40V 18A 43mO (Alt: FDS8638) RoHS : Compliant | 0 | |||
| KSZ8863RLL | Microchip Technology Inc | Ethernet Switch 3Port 10Mbps100Mbps 48Pin LQFP Tray (Alt: KSZ8863RLL) RoHS : Compliant | 0 | |||
| KSZ8863RLLI | Microchip Technology Inc | Ethernet Switch 3Port 100Mbps 48Pin LQFP Tray (Alt: KSZ8863RLLI) RoHS : Compliant | 0 | |||
| FCE863RABMD | Quectel Wireless Solutions Co Ltd | WiFi 6 80211a b g n ac ax 2 2 2T2R 24 5 GHz dualband PCIe interface (Alt: FCE863RABMD) RoHS : Compliant | 0 | |||
| FDMS86300DC | onsemi | Power MOSFET N Channel 80 V 76 A 00026 ohm Power 56 Surface Mount (Alt: FDMS86300DC) RoHS : Compliant | 0 | |||
| FDD86369-F085 | onsemi | NChannel PowerTrench MOSFET 80 V 90 A 79 mO (Alt: FDD86369-F085) RoHS : Compliant | 0 | |||
| KSZ8863MLLI-TR | Microchip Technology Inc | Ethernet Switch 3 Port 10Mbps100Mbps 48Pin LQFP TR (Alt: KSZ8863MLLI-TR) RoHS : Compliant | 0 | |||
| FDWS86369-F085 | onsemi | MV7 N Channel Power Trench MosFET (Alt: FDWS86369-F085) RoHS : Compliant | 0 | |||
| MPQ8633B-HGLE-Z | Monolithic Power Systems | DCDC Switching Synchronous Buck Regulator Adjustable 4 to 16V in 06 to 55V20A Out QFN21 (Alt: MPQ8633B-HGLE-Z) RoHS : Compliant | 0 | |||
| KSZ8863MLL-EVAL | Microchip Technology Inc | KSZ8863MLL 3Port 100Mbps Ethernet Switch Evaluation Board (Alt: KSZ8863MLL EVAL) RoHS : Compliant | 0 | |||
| MPQ8633B-HGLE-P | Monolithic Power Systems | DCDC Switching Synchronous Buck Regulator Adjustable 4 to 16V in 06 to 55V20A Out QFN21 (Alt: MPQ8633B-HGLE-P) RoHS : Compliant | 0 | |||
| MPQ8636GVE-20-Z | Monolithic Power Systems | (Alt: MPQ8636GVE-20-Z) RoHS : Compliant | 0 | |||
| MPQ8636HGLE-10-Z | Monolithic Power Systems | 10A 4518VCCM Nonlatch OVP COT Synchronous Stepdown Converter (Alt: MPQ8636HGLE-10-Z) RoHS : Compliant | 0 | |||
| MPQ8636HGLE-10-P | Monolithic Power Systems | (Alt: MPQ8636HGLE-10-P) RoHS : Compliant | 0 | |||
![]() Braemac Americas-Symmetry | AMMLPEBXRS-28.6363T | Abracon Corporation |
| 0 | ||
| AMMLPFLALJS-28.6363T | Abracon Corporation |
| 0 | |||
| AMMLPFLBVRS-28.6363T | Abracon Corporation |
| 0 | |||
ABM8G-28.63636MHZ-18-D2Y-T![]() | Abracon Corporation | CRYSTAL 28.63636MHZ 18PF SMD RoHS : Unknown |
| 0 | ||
| AMMLPABVRS-28.6363T | Abracon Corporation |
| 0 | |||
| AMMLPFLALRS-28.6363T | Abracon Corporation |
| 0 | |||
| AMMLPABXRS-28.6363T | Abracon Corporation |
| 0 | |||
| AMMLPDAVRS-28.6363T | Abracon Corporation |
| 0 | |||
| AMMLPFLAXRS-28.6363T | Abracon Corporation |
| 0 | |||
| AMMLPVALRS-28.6363T | Abracon Corporation |
| 0 | |||
ABM3-28.6363MHZ-B2-T![]() | Abracon Corporation | CRYSTAL 28.6363MHZ 18PF SMD RoHS : Compliant |
| 0 | ||
| AMMLPABXCS-28.6363T | Abracon Corporation |
| 0 | |||
| AMMLPDBXJS-28.6363T | Abracon Corporation |
| 0 | |||
| TMCS-28-6.35-10000-AT-01 | Analog Devices Inc | High Resolution Optical Encoder |
| 0 | ||
AB308-28.6363MHZ![]() | Abracon Corporation | CRYSTAL 28.6363MHZ 16PF T/H RoHS : Compliant |
| 0 | ||
![]() Component Electronics, Inc | SIP-1X08-636C | McKenzie Electronics | IN STOCK SHIP TODAY | 3,800 | ||
| 5786382-1 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 1,456 | ||
LM4863LQ/NOPB![]() | Texas Instruments | IN STOCK SHIP TODAY RoHS : Compliant |
| 1,275 | ||
| 0874370863 | Molex | IN STOCK SHIP TODAY RoHS : Compliant |
| 823 | ||
| 87437-0863 | Molex | IN STOCK SHIP TODAY RoHS : Compliant |
| 823 | ||
| 2128-632-S-12 | RAF Electronic Hardware | IN STOCK SHIP TODAY |
| 700 | ||
| 103186-3 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 270 | ||
| 86353.15.05 | General Cable Technologies Corporation | IN STOCK SHIP TODAY | 200 | |||
| 1-338086-3 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 200 | ||
| 145286-3 | TE Connectivity | IN STOCK SHIP TODAY |
| 51 | ||
| ACO-28.63636MHZ-D | Abracon Corporation | IN STOCK SHIP TODAY |
| 48 | ||
| CS10-28.63636MABJ-UT | Citizen Finedevice Co Ltd | IN STOCK SHIP TODAY |
| 11 | ||
| 65863-717 | Amphenol FCi | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 2 | ||
AD8631ART-REEL7![]() | Analog Devices Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 2 | ||
| 8638PSS4005LF | Amphenol FCi | IN STOCK SHIP TODAY |
| 2 | ||
![]() DB Roberts | SOS-8632-6 | PennEngineering (PEM) | These standoffs which use the proven self-clinching design install with a squeeze in properly sized round holes - and become permanently mounted in the thin sheet. PEM� brand thru-hole threaded standoffs are installed with their heads flush with |
| 100,908 | |
| BSOS-8632-20 | PennEngineering (PEM) | These standoffs which use the proven self-clinching design install with a squeeze in properly sized round holes - and become permanently mounted in the thin sheet.When blind-threaded types are used outer sheet surfaces are not only flush but c |
| 39,571 | ||
| SOA-8632-10 | PennEngineering (PEM) | These standoffs which use the proven self-clinching design install with a squeeze in properly sized round holes - and become permanently mounted in the thin sheet. PEM� brand thru-hole threaded standoffs are installed with their heads flush with |
| 738 | ||
| 2098-632-N | RAF Electronic Hardware | 0 | ||||
| 1286388 | Essentra Components | 48MM ROUND H DUTY THREADED GLI | 0 | |||
| 2238-632-N | RAF Electronic Hardware | HEX STANDOFF THREADED #6-32 NYLON 0.500 (12.70MM) 1/2 | 0 | |||
| 1818-632-S | RAF Electronic Hardware | 0 | ||||
| 10863 | Heyco | HSSRS8-12 NATURAL | 0 | |||
| 4538-632-S | RAF Electronic Hardware | 0 | ||||
| SOS-8632-34 | PennEngineering (PEM) | These standoffs which use the proven self-clinching design install with a squeeze in properly sized round holes - and become permanently mounted in the thin sheet. PEM� brand thru-hole threaded standoffs are installed with their heads flush with | 0 | |||
| 2108-632-B-12 | RAF Electronic Hardware | ZINC(CLEAR CROMATE)PLATED 1/4 HEX FEM STANDOFF | 0 | |||
| 2098-632-SSMODL=.787 | RAF Electronic Hardware | 0 | ||||
| 1286372 | Essentra Components | 50MM SQUARE H DUTY THREADED GL | 0 | |||
| 1286378 | Essentra Components | 30MM ROUND H DUTY THREADED GLI | 0 | |||
| 186301070409 | Essentra Components | PEEK Threaded Hex Standoff M3 10.0 mm Spacer Light Brown | 0 | |||
![]() EBV Elektronik | LTE6SG-BACA-36-U686-30-S | ams OSRAM Group | LED Single Chip Green 530nm 50mA 4Pin PLCC TR (Alt: Q65113A4324) RoHS : Compliant | 568,000 | ||
| LTE6SG-AABB-36-U686-30-S | ams OSRAM Group | LED Single Chip True Green 530nm 30mA 4Pin TR (Alt: Q65113A1343) RoHS : Compliant | 64,000 | |||
| SFH6186-3T | Vishay Intertechnologies | SMD4 CPLR 100200 CTR e3 (Alt: SFH6186-3T) RoHS : Compliant | 34,000 | |||
| KSZ8863RLLI-TR | Microchip Technology Inc | Ethernet Controller Ethernet Switch IEEE 8023 IEEE 8023u 3135 V 3465 V LQFP 48 Pins (Alt: KSZ8863RLLI-TR) RoHS : Compliant | 3,000 | |||
| KSZ8863RLL | Microchip Technology Inc | Ethernet Switch 3Port 10Mbps100Mbps 48Pin LQFP Tray (Alt: KSZ8863RLL) RoHS : Compliant | 2,750 | |||
| FDD86369-F085 | onsemi | NChannel PowerTrench MOSFET 80 V 90 A 79 mO (Alt: FDD86369-F085) RoHS : Compliant | 2,500 | |||
| FDS8638 | onsemi | NChannel PowerTrench MOSFET 40V 18A 43mO (Alt: FDS8638) RoHS : Compliant | 0 | |||
| SFH6186-3 | Vishay Intertechnologies | SMD4 CPLR 100200 CTR e3 (Alt: SFH6186-3) RoHS : Compliant | 0 | |||
| SFH6286-3T | Vishay Intertechnologies | SMD4 CPLR 100320 CTR e3 (Alt: SFH6286-3T) RoHS : Compliant | 0 | |||
| KSZ8863RLLI | Microchip Technology Inc | Ethernet Switch 3Port 100Mbps 48Pin LQFP Tray (Alt: KSZ8863RLLI) RoHS : Compliant | 0 | |||
| SFH6286-3076 | Vishay Intertechnologies | Optocoupler (Alt: SFH6286-3076) RoHS : Compliant | 0 | |||
| KSZ8863MLLI-TR | Microchip Technology Inc | Ethernet Switch 3 Port 10Mbps100Mbps 48Pin LQFP TR (Alt: KSZ8863MLLI-TR) RoHS : Compliant | 0 | |||
| FDWS86369-F085 | onsemi | MV7 N Channel Power Trench MosFET (Alt: FDWS86369-F085) RoHS : Compliant | 0 | |||
| PFS8632BMBAVES | NXP Semiconductors | PMIC PFS8632BMBAVES Engineering sample (Alt: PFS8632BMBAVES) RoHS : Compliant | 0 | |||
| PFS8632BMDAKES | NXP Semiconductors | Engeneering samples (Alt: PFS8632BMDAKES) RoHS : Compliant | 0 | |||
![]() ECCO | 97-3102A-18(639)(0850) | Amphenol Industrial Operations |
| 2,014 | ||
| 97-3102A-28(639)(0850) | Amphenol Industrial Operations |
| 104 | |||
| 97-3102A-28(639)(0850) | Amphenol Industrial Operations |
| 104 | |||
| 97-3106A-28(639)(0850) | Amphenol Industrial Operations |
| 38 | |||
| 97-3106A-28(639)(0850) | Amphenol Industrial Operations |
| 38 | |||
| 97-3057-28(639) | Amphenol Industrial Operations |
| 25 | |||
| 97-3057-28(639) | Amphenol Industrial Operations |
| 25 | |||
| 97-3107B-18(639)(0850) | Amphenol Industrial Operations |
| 25 | |||
| 97-3106B-18(639)(417)(085 | Amphenol Industrial Operations | 21 | ||||
| 97-3106B-18(639)(0850) | Amphenol Industrial Operations | 21 | ||||
| 97-3108B-28(639)(0850) | Amphenol Industrial Operations |
| 14 | |||
| 97-3108B-28(639)(0850) | Amphenol Industrial Operations |
| 14 | |||
| 97-60-28(639) | Amphenol Industrial Operations |
| 12 | |||
| 97-60-28(639) | Amphenol Industrial Operations |
| 12 | |||
| 97-3106B-28(639)(0850) | Amphenol Industrial Operations |
| 9 | |||
![]() Flip Electronics | FDWS86380-F085 | onsemi | Stock, Ship Today RoHS : Compliant | 73,353 | ||
| FDWS86369-F085 | onsemi | Stock, Ship Today RoHS : Compliant | 55,687 | |||
| FAN48630UC315X | onsemi | Stock, Ship Today RoHS : Compliant |
| 30,000 | ||
| FDMC86340 | onsemi | Stock, Ship Today RoHS : Compliant | 24,000 | |||
| FAN48630UC35X | onsemi | Stock, Ship Today RoHS : Compliant |
| 18,209 | ||
| FDB86366-F085 | onsemi | Stock, Ship Today RoHS : Compliant |
| 16,000 | ||
| FDB86366 | onsemi | Stock | 16,000 | |||
| FDMS86300DC | onsemi | Stock, Ship Today RoHS : Compliant |
| 6,000 | ||
| FDD86369-F085 | onsemi | Stock, Ship Today RoHS : Compliant |
| 5,566 | ||
| FAN48632UC35X | onsemi | Stock, Ship Today RoHS : Compliant |
| 3,000 | ||
| LB1863M-TLM-E | onsemi | Stock, Ship Today RoHS : Compliant |
| 1,000 | ||
| CY7C2565XV18-633BZXC | Infineon Technologies AG | Stock, Ship Today RoHS : Compliant |
| 936 | ||
| SI5340B-D13863-GM | Skyworks Solutions Inc | Stock, Ship Today |
| 693 | ||
| FDS8638 | onsemi | Stock, Ship Today RoHS : Compliant | 643 | |||
| CY7C2563XV18-633BZXC | Infineon Technologies AG | Stock, Ship Today RoHS : Compliant |
| 509 | ||
![]() Maritex | 2038638103 | Molex | Solid-State Lighting (SSL) Connectors; 2038638103; MOLEX; 7 A; Yes; 1 RoHS : Compliant |
| 31,740 | |
| FDD86381-F085 | onsemi | MOSFETs; FDD86381-F085; ON SEMICONDUCTOR; 80 V; 25 A; 20 V; 48.4 W RoHS : Compliant |
| 9,317 | ||
| 1-1827863-0 | TE Connectivity | Rectangular Connector Housings; 1-1827863-0; TE CONNECTIVITY; 2; 40; 40; Yes RoHS : Compliant |
| 9,225 | ||
| PAM2863ECR | Diodes Incorporated | DC DC Converters; PAM2863ECR; DIODES; 8; Buck; 1.63 mm; 1 RoHS : Compliant |
| 5,000 | ||
| 1-1827863-4 | TE Connectivity | Rectangular Connector Housings; 1-1827863-4; TE CONNECTIVITY; 2; 28; 28; Yes RoHS : Compliant |
| 4,700 | ||
| FDMS86300 | onsemi | MOSFETs; FDMS86300; ON SEMICONDUCTOR; 24 A; 80 V; 3.1 m?; 20 V RoHS : Compliant |
| 2,768 | ||
AD8638ARZ-REEL7![]() | Analog Devices Inc | General Purpose Amplifiers; AD8638ARZ-REEL7; ANALOG DEVICES; 8; 1; 5 V; 37 mA RoHS : Compliant |
| 1,290 | ||
OPA2863IDGKR![]() | Texas Instruments | Operational Amplifiers; OPA2863IDGKR; TEXAS INSTRUMENTS; 8; 2 RoHS : Compliant |
| 950 | ||
LP8863ADCPRQ1![]() | Texas Instruments | LED Drivers; LP8863ADCPRQ1; TEXAS INSTRUMENTS; 38 RoHS : Compliant |
| 773 | ||
CSD86330Q3D![]() | Texas Instruments | MOSFETs; CSD86330Q3D; TEXAS INSTRUMENTS; 20 A; 25 V; 8 V RoHS : Compliant |
| 440 | ||
| 51863-4 | TE Connectivity | Ring Terminals; 51863-4; TE CONNECTIVITY; Free Hanging; Crimp; Insulated; Copper RoHS : Compliant |
| 315 | ||
| 1-1827863-1 | TE Connectivity | Rectangular Connector Housings; 1-1827863-1; TE CONNECTIVITY; 2; 22; 22; Yes RoHS : Compliant |
| 100 | ||
AD7863BR-3![]() | Analog Devices Inc | Analog-to-Digital Converters (ADC); AD7863BR-3; ANALOG DEVICES; 28; Parallel; 5.25 V; SOIC RoHS : Not Compliant |
| 29 | ||
AD8634HRZN![]() | Analog Devices Inc | Operational Amplifiers; AD8634HRZN; ANALOG DEVICES; 250 �V; 2; 1.1 mA; 115 dB RoHS : Compliant |
| 29 | ||
TPS78633DCQR![]() | Texas Instruments | LDO Regulators; TPS78633DCQR; TEXAS INSTRUMENTS; 6; 1; 1.5 A; 3.3 V RoHS : Compliant |
| 1 | ||
![]() Master Electronics | 1863886-3 | Honeywell Sensing and Control | Honeywell 1863886-3 RoHS : Compliant |
| 0 | |
| 2386386-3 | TE Connectivity | JPT REC 2.8 CONTACT SRC SN MOQ Reduction RoHS : Compliant |
| 0 | ||
| 2-1565086-3 | TE Connectivity | GRACE INERTIA CONNECTOR 3.5 3P RoHS : Compliant |
| 0 | ||
| 207911-8630 | Molex | RoHS : Compliant |
| 0 | ||
| 2098-632-N | RAF Electronic Hardware | 1/4 HEX X 1/8 LENGTH RoHS : Compliant |
| 0 | ||
| 2176486-3 | TE Connectivity | BMC 0805 220R 25% A Gen C RoHS : Compliant |
| 0 | ||
| 219-3-1-63-8-6-30 | Sensata Circuit Breakers | Circuit Breaker Hydraulic Magnetic 3Pole 30A 480VAC RoHS : Compliant |
| 0 | ||
| 1792863 | Phoenix Contact | PCB terminal block - nominal current: 16 A - rated voltage (III/2): 400 V - nominal cross section: 1.5 mm² - pitch: 5 mm - number of positions: 2 - connection method: Push-in spring connection - mounting: Wave soldering - conductor/PCB connection direction: 0 ° - color: green - Pin layout: Linear pinning - Solder pin [P]: 2.5 mm RoHS : Compliant |
| 0 | ||
| 121551-1863 | ITT Interconnect Solutions | DA-15P-1-A-7-N-A191-K87-162; D Sub; D Sub RoHS : Compliant |
| 0 | ||
| 2238-632-N | RAF Electronic Hardware | Hex Standoff #6-32 Thrd Sz 1/2 in L Nylon Plain 3/8 Hex W RoHS : Compliant |
| 0 | ||
| 223863-1200 | Molex | HAND TOOL RoHS : Compliant |
| 0 | ||
| 2286369-5 | TE Connectivity | Insert Assy Amplimite 90 Rcpt Mil SZ5 RoHS : Compliant |
| 0 | ||
| 121086-3079 | ITT Interconnect Solutions | Cge Bench Mt Safety Device RoHS : Compliant |
| 0 | ||
| 121086-3330 | ITT Interconnect Solutions | Itt Cannon Tool RoHS : Compliant |
| 0 | ||
| 10216863-00 | TE Connectivity | EGCS-D0-100-/V5/L2M MOQ Reduction RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3W06863-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. N Male to N Male Right Angle Cable 100 cm Length Using RG142 Coax., Radio frequency assembly N male to N male right angle cable 100 cm length using RG142 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to N male right angle cable 100 cm length using RG142 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and right angle type N cable connection on the other. Our N type to right angle type N cable assemblies have a male gender on end 1 and male on end 2. This type N to type N cable is a male to male coax assembly, PE3W06863-100CM, can also be known as a N type plug to right angle type N plug cable assembly and will be shipped same-day as it is purchased. Type N plug to N type plug cable assembly PE3W06863-100CM is built with RG142 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to right angle type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this type N male to N type right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W06863-100CM can also be used in the other direction and will be right angle type N male to type N male cable assembly if the opposite connectivity is required. N type plug to type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male right angle cable 100 cm length using RG142 coax. |
| 1,244 | |
| PE3C8634LF/HS-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Male to SMA Male Low Loss Cable 36 Inch Length Using LMR-100A-UF Coax with HeatShrink, LF Solder., Radio frequency assembly SMA male to SMA male low loss cable 36 inch length using LMR-100A-UF coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA male low loss cable 36 inch length using LMR-100A-UF coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a SMA cable connection on the other. Our low loss SMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3C8634LF/HS-36 can also be known as a low loss SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C8634LF/HS-36 RF cable has a TPE jacket of 0.110-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. SMA plug to SMA plug cable assembly PE3C8634LF/HS-36 is built with LMR-100A-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 927 | ||
| PE3C8634LF/HS-100CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. SMA Male to SMA Male Low Loss Cable 100 CM Length Using LMR-100A-UF Coax with HeatShrink, LF Solder., Radio frequency assembly SMA male to SMA male low loss cable 100 cm length using LMR-100A-UF coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA male low loss cable 100 cm length using LMR-100A-UF coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a SMA cable connection on the other. Our low loss SMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3C8634LF/HS-100CM can also be known as a low loss SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C8634LF/HS-100CM RF cable has a TPE jacket of 0.110-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. SMA plug to SMA plug cable assembly PE3C8634LF/HS-100CM is built with LMR-100A-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 847 | ||
| PE3C7863-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm, Length: 48 inches. SMA Male to SMA Male Low PIM Cable 48 Inch Length Using 1/4 inch Superflexible Coax., Radio frequency assembly SMA male to SMA male low PIM cable 48 inch length using 1/4 inch superflexible coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA male low PIM cable 48 inch length using 1/4 inch superflexible coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our low PIM SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE3C7863-48, can also be known as a low PIM SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3C7863-48 is built with 1/4" superflexible which is a corrugated coax type. The Pasternack low passive intermodulation corrugated SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low PIM SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male low PIM cable 48 inch length using 1/4 inch superflexible coax. |
| 182 | ||
| PE3W17863-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPF-250, RF Cable Type: SPF-250, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. NEX10 Female Bulkhead to NEX10 Female Bulkhead Low PIM Cable 36 Inch Length Using SPF-250 Coax., Radio frequency assembly NEX10 female bulkhead to NEX10 female bulkhead low PIM cable 36 inch length using SPF-250 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 female bulkhead to NEX10 female bulkhead low PIM cable 36 inch length using SPF-250 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 bulkhead cable connection on one end and a NEX10 bulkhead cable connection on the other. Our low PIM a NEX10 to a NEX10 cable assembly has female gender on end 1 and female on end 2. PE3W17863-36 can also be known as a low PIM NEX10 jack to NEX10 jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for general purpose, laboratory use and low pim applications. Our PE3W17863-36 RF cable has a FRPE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The corrugated RF cable has an in-series connection. NEX10 jack to NEX10 jack cable assembly PE3W17863-36 is built with SPF-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated NEX10 cable assembly is manufactured with NEX10 to NEX10 cable connectors and has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM NEX10 jack bulkhead to NEX10 jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements. |
| 74 | ||
| PE3W05863/HS-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: MMBX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length: 48 inches. Snap-On MMBX Plug to SMA Male Cable 48 Inch Length Using PE-SR405FLJ Coax with HeatShrink., Radio frequency assembly snap-on MMBX plug to SMA male cable 48 inch length using PE-SR405FLJ coax with heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Snap-on MMBX plug to SMA male cable 48 inch length using PE-SR405FLJ coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MMBX to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with MMBX cable connection on one end and SMA cable connection on the other. Our MMBX to SMA cable assemblies have a plug gender on end 1 and male on end 2. This MMBX to SMA cable is a plug to male coax assembly, PE3W05863/HS-48, can also be known as a MMBX male to SMA plug cable assembly and will be shipped same-day as it is purchased. MMBX male to SMA plug cable assembly PE3W05863/HS-48 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable MMBX cable assembly is manufactured with MMBX to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 12.4 GHz maximum frequency MMBX plug to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W05863/HS-48 can also be used in the other direction and will be SMA male to MMBX plug cable assembly if the opposite connectivity is required. MMBX male to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MMBX to SMA cable assembly for quick shipment worldwide. Variations of MMBX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this snap-on MMBX plug to SMA male cable 48 inch length using PE-SR405FLJ coax with heatshrink. |
| 69 | ||
| PE3C6186-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 36 inches. Plenum 4.3-10 Male to 7/16 DIN Male Low PIM Cable 36 Inch Length Using SPP-250-LLPL Coax Using Times Microwave Parts., Radio frequency assembly plenum 4.3-10 male to 7/16 DIN male low PIM cable 36 inch length using SPP-250-LLPL coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum 4.3-10 male to 7/16 DIN male low PIM cable 36 inch length using SPP-250-LLPL coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-250-4310M-LP 4.3-10 to TC-SPP250-716M-LP 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-250-4310M-LP 4.3-10 cable connection on one end and TC-SPP250-716M-LP 7/16 DIN cable connection on the other. Our low PIM TC-250-4310M-LP 4.3-10 to TC-SPP250-716M-LP 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. This TC-250-4310M-LP 4.3-10 to TC-SPP250-716M-LP 7/16 DIN cable is a male to male coax assembly, PE3C6186-36, can also be known as a low PIM TC-250-4310M-LP 4.3-10 plug to TC-SPP250-716M-LP 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. TC-250-4310M-LP 4.3-10 plug to TC-SPP250-716M-LP 7/16 DIN plug cable assembly PE3C6186-36 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-250-4310M-LP 4.3-10 cable assembly is manufactured with TC-250-4310M-LP 4.3-10 to TC-SPP250-716M-LP 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-250-4310M-LP 4.3-10 male to TC-SPP250-716M-LP 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6186-36 can also be used in the other direction and will be TC-SPP250-716M-LP 7/16 DIN male to TC-250-4310M-LP 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM TC-250-4310M-LP 4.3-10 plug to TC-SPP250-716M-LP 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-250-4310M-LP 4.3-10 to TC-SPP250-716M-LP 7/16 DIN cable assembly for quick shipment worldwide. Variations of TC-250-4310M-LP 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 4.3-10 male to 7/16 DIN male low PIM cable 36 inch length using SPP-250-LLPL coax using Times Microwave parts. |
| 42 | ||
| PE3W15863 | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm. 4.3-10 Male to N Male Cable Using LMR-400 Coax. PE3W15863 is a 4.3-10 male to N male cable using LMR-400 coax. This Pasternack 4.3-10 male to N male cable assembly uses a 50 Ohm 4.3-10 for connector 1 and a 50 Ohm N for connector 2. Our male 4.3-10 to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W15863 4.3-10 male to N male cable assembly is constructed with LMR-400 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE38632-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: UHF, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: UHF, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C195, RF Cable Type: PE-C195, RF Cable Impedance: 50 Ohm, Length: 48 inches. UHF Male to UHF Male Cable 48 Inch Length Using PE-C195 Coax., Radio frequency assembly UHF male to UHF male cable 48 inch length using PE-C195 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. UHF male to UHF male cable 48 inch length using PE-C195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom UHF to UHF cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with UHF cable connection on one end and UHF cable connection on the other. Our low loss UHF to UHF cable assemblies have a male gender on end 1 and male on end 2. This UHF to UHF cable is a male to male coax assembly, PE38632-48, can also be known as a low loss UHF plug to UHF plug cable assembly and will be shipped same-day as it is purchased. UHF plug to UHF plug cable assembly PE38632-48 is built with PE-C195 which is a flexible coax type. The Pasternack flexible UHF cable assembly is manufactured with UHF to UHF cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 300 MHz maximum frequency UHF male to UHF male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss UHF plug to UHF plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality UHF to UHF cable assembly for quick shipment worldwide. Variations of UHF cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this UHF male to UHF male cable 48 inch length using PE-C195 coax. |
| 0 | ||
| PE38638-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C240, RF Cable Type: PE-C240, RF Cable Impedance: 50 Ohm, Length: 60 inches. SMA Male to SMA Female Cable 60 Inch Length Using PE-C240 Coax., Radio frequency assembly SMA male to SMA female cable 60 inch length using PE-C240 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. SMA male to SMA female cable 60 inch length using PE-C240 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our low loss SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMA cable is a male to female coax assembly, PE38638-60, can also be known as a low loss SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE38638-60 is built with PE-C240 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SMA male to SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE38638-60 can also be used in the other direction and will be SMA female to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA female cable 60 inch length using PE-C240 coax. |
| 0 | ||
| PE34486-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMC, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMC, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-B100, RF Cable Type: PE-B100, RF Cable Impedance: 50 Ohm, Length: 36 inches. SMC Plug Right Angle to SMC Jack Bulkhead Cable 36 Inch Length Using PE-B100 Coax., Radio frequency assembly SMC plug right angle to SMC jack bulkhead cable 36 inch length using PE-B100 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMC plug right angle to SMC jack bulkhead cable 36 inch length using PE-B100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMC to SMC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMC cable connection on one end and SMC bulkhead cable connection on the other. Our right angle SMC to SMC cable assemblies have a plug gender on end 1 and jack on end 2. This SMC to SMC cable is a plug to jack coax assembly, PE34486-36, can also be known as a right angle SMC male to SMC female cable assembly and will be shipped same-day as it is purchased. SMC male to SMC female cable assembly PE34486-36 is built with PE-B100 which is a flexible coax type. The Pasternack flexible SMC cable assembly is manufactured with right angle SMC to SMC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency SMC right angle plug to SMC jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34486-36 can also be used in the other direction and will be SMC jack bulkhead to right angle SMC plug cable assembly if the opposite connectivity is required. SMC right angle male to SMC female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMC to SMC cable assembly for quick shipment worldwide. Variations of SMC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMC plug right angle to SMC jack bulkhead cable 36 inch length using PE-B100 coax. |
| 0 | ||
| PE3C0863/HS/PH180 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm. N Male Right Angle to SMA Male Right Angle Cable Using LMR-240-UF Coax with HeatShrink and 180 Deg. Clock. PE3C0863/HS/PH180 is a N male right angle to SMA male right angle cable using LMR-240-UF coax. This Pasternack N male right angle to SMA male right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm SMA for connector 2. N right angle to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N right angle to male SMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C0863/HS/PH180 N male right angle to SMA male right angle cable assembly is constructed with LMR-240-UF coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3C3286-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG402/U, RF Cable Type: RG402, RF Cable Impedance: 50 Ohm, Length: 36 inches. N Male to N Female Bulkhead Cable 36 Inch Length Using RG402 Coax., Radio frequency assembly N male to N female bulkhead cable 36 inch length using RG402 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to N female bulkhead cable 36 inch length using RG402 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and N type bulkhead cable connection on the other. Our type N to type N cable assemblies have a male gender on end 1 and female on end 2. This type N to type N cable is a male to female coax assembly, PE3C3286-36, can also be known as a N type plug to N type jack cable assembly and will be shipped same-day as it is purchased. Type N plug to type N jack cable assembly PE3C3286-36 is built with RG402 which is a semi-rigid coax type. The Pasternack semi-rigid N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 8 GHz maximum frequency N type male to N type female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C3286-36 can also be used in the other direction and will be type N female bulkhead to type N male cable assembly if the opposite connectivity is required. Type N plug to N type jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N female bulkhead cable 36 inch length using RG402 coax. |
| 0 | ||
| PE3W02863 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Female to N Female Cable Using LMR-195 Coax. PE3W02863 is a reverse polarity SMA female to N female cable using LMR-195 coax. This Pasternack reverse polarity SMA female to N female cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm N for connector 2. Our reverse polarity female SMA to female N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W02863 SMA reverse polarity female to N female cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W18631 | Pasternack Enterprises | Key Specifications, Connector Series 1: MCX, Connector Gender 1: Plug, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm. MCX Plug Right Angle to MCX Plug Right Angle Cable Using RG178 Coax. PE3W18631 is a MCX plug right angle to MCX plug right angle cable using RG178 coax. This Pasternack MCX plug right angle to MCX plug right angle cable assembly uses a 50 Ohm MCX for connector 1 and a 50 Ohm MCX for connector 2. MCX right angle to MCX right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug MCX right angle to plug MCX right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W18631 MCX plug right angle to MCX plug right angle cable assembly is constructed with RG178 coax. | 0 | |||
![]() Teledyne HiRel | 5962-8863604KA | Teledyne HiRel | PROM, 1K X 8, REGISTERED, 30 NS RoHS : Not Compliant | 0 | ||
5962-8863902RA![]() | Teledyne HiRel | LATCH, 8-BIT, TRANSPARENT, WITH 3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS RoHS : Not Compliant | 0 | |||
| 5962-8863605LA | Teledyne HiRel | PROM, 1K X 8, REGISTERED, 25 NS RoHS : Not Compliant | 0 | |||
| 5962-8986304XA | Teledyne HiRel | FIFO MEMORY, 512 X 9, 40 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
5962-8986302YA![]() | Teledyne HiRel | FIFO MEMORY, 512 X 9, 65 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
| 5962-8986302ZA | Teledyne HiRel | FIFO MEMORY, 512 X 9, 65 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
| 5962-8986305XA | Teledyne HiRel | FIFO MEMORY, 512 X 9, 30 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
| 5962-88636023A | Teledyne HiRel | PROM, 1K X 8, REGISTERED, 30 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
5962-8986305YA![]() | Teledyne HiRel | FIFO MEMORY, 512 X 9, 30 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
| 5962-8863701KA | Teledyne HiRel | PROG. LOGIC DEVICE, 40 NS PROP. DELAY RoHS : Not Compliant | 0 | |||
| 5962-8986303UA | Teledyne HiRel | FIFO MEMORY, 512 X 9, 50 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
| 5962-8863605KA | Teledyne HiRel | PROM, 1K X 8, REGISTERED, 25 NS RoHS : Not Compliant | 0 | |||
| 5962-8863601KA | Teledyne HiRel | PROM, 1K X 8, REGISTERED, 40 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
| 5962-88636053A | Teledyne HiRel | PROM, 1K X 8, REGISTERED, 25 NS RoHS : Not Compliant | 0 | |||
5962-8986301YA![]() | Teledyne HiRel | FIFO MEMORY, 512 X 9, 80 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
![]() Vyrian | LT8637EV-PBF | Analog Devices Inc | 12,222 | |||
| LTC3863MPDE#PBF | Analog Devices Inc | Switching Controller, Current-mode, 850kHz Switching Freq-Max, CMOS, PDSO12 RoHS : Compliant | 10,832 | |||
| 1863055 | Phoenix Contact | Modular Terminal Block, 8A, 1.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 10,144 | |||
| 130560-HMC863LP4E | Analog Devices Inc | 9,066 | ||||
| MFS8630BMBA0ES | NXP Semiconductors | Power Supply Management Circuit, Fixed, 1 Channel RoHS : Compliant | 8,649 | |||
| LT8638SJV#WPBF | Analog Devices Inc | Switching Regulator, Current-mode, 12A, 3000kHz Switching Freq-Max RoHS : Compliant | 7,675 | |||
| LTC3863MPMSE#PBF | Analog Devices Inc | Switching Controller, Current-mode, 850kHz Switching Freq-Max, CMOS, PDSO12 RoHS : Compliant | 7,533 | |||
| LT8630IFE#TRPBF | Analog Devices Inc | Switching Regulator, Current-mode, 0.6A, PDSO16 RoHS : Compliant | 7,274 | |||
| LT8638SEV#PBF | Analog Devices Inc | Switching Regulator, Current-mode, 12A, 3000kHz Switching Freq-Max RoHS : Compliant | 6,570 | |||
| MFS8630BMBA0ESR2 | NXP Semiconductors | Power Supply Management Circuit, Fixed, 1 Channel RoHS : Compliant | 5,495 | |||
| 2944863 | Phoenix Contact | Enclosures/Accessories | 5,307 | |||
SN74ABT863DWG4![]() | Texas Instruments | Bus Transceiver, ABT Series, 1-Func, 9-Bit, True Output, BICMOS, PDSO24 RoHS : Compliant | 4,465 | |||
SN74BCT29863BDWRE4![]() | Texas Instruments | Bus Transceiver, BCT/FBT Series, 1-Func, 9-Bit, True Output, BICMOS, PDSO24 RoHS : Compliant | 4,450 | |||
| 1610L3863 | Broadcom Limited | 4,425 | ||||
| RKT8-6-337/5M | Belden Inc | Circular Connector, 6 Contact(s), TPU, Female, Plug RoHS : Compliant | 801 | |||
![]() Waytek, Inc. | 131863-91W | General Cable Technologies Corporation | 18GA GXL Orange Cross-Link Automotive Wire XLPE -51C to 125C |
| 336,500 | |
| 148630-91W | General Cable Technologies Corporation | 10GA SXL Red Cross-Link Automotive Wire XLPE -51C to 125C |
| 10,250 | ||
| 7100163863 | 3M | 12-10 GA #10 Spade Terminal Insulated Vinyl |
| 3,012 | ||
| 15326863 | Aptiv PLC | GT 150 Series, 16 Way Sealed Female Connector RoHS : Compliant |
| 2,917 | ||
| 12065863 | Aptiv PLC | 2-Way Metri-Pack 480 Connector Male DELPHI # 12065863 RoHS : Compliant |
| 2,320 | ||
| 098633220981B | The Bosch Group | The Bosch 098633220981B is a 12V, 30 amp mini relay with SPST (normally open) configuration, designed for reliable switching of high-current circuits in automotive and mobile electrical systems. Incorporating an internal resistor for circuit protection, it helps suppress voltage spikes and improve overall system stability. |
| 1,355 | ||
| 986332401 | The Bosch Group | Mini Relay, Change Over, 5-Pin SPDT, 30NO, 20NC, 12VDC Like 75413 |
| 1,176 | ||
| 986332302 | The Bosch Group | Mini Relay, Normally Open, 4-Pin, SPST, 30A, 12VDC w/Resistor | Like 75302 |
| 1,158 | ||
| 0986332300 | The Bosch Group | The Bosch 0332019150441 is a 12V, 30 amp mini relay with SPST (normally open) configuration, designed for reliable switching of high-current circuits in automotive and mobile electrical systems. Featuring a 5-pin Mini ISO layout with 6.3 mm blade terminals, it provides secure connections and consistent electrical performance. Built for durability, this relay operates in temperatures from -40C to +100C and offers excellent resistance to vibration, impact, and harsh environmental conditions. Its compact design allows easy integration into wiring systems for controlling loads such as lighting, fuel pumps, motors, and auxiliary equipment. |
| 1,138 | ||
| 098633220381B | The Bosch Group | Mini Relay, Change Over, 5-Pin SPDT, 20NO, 10NC, 24VDC w/Bracket | Like 75326 |
| 919 | ||
| 986332215 | The Bosch Group | Mini Relay, Change Over, 5-Pin SPDT, 50NO, 20NC, 12VDC Like 75312 |
| 590 | ||
| 986332405 | The Bosch Group | Mini Relay, Change Over, 5-Pin SPDT, 20NO, 10NC, 24VDC Like 75325 |
| 341 | ||
| 0986332402 | The Bosch Group | Mini Relay, Change Over, SPDT 12VDC, 30A, 20 NC |
| 138 | ||
| 098633221081B | The Bosch Group | Mini Relay, Normally Open, SPST, 4-Pin, 12VDC, 30A |
| 124 | ||
| 986332053 | The Bosch Group | Mini Relay, CHange Over, 5-Pin SPDT, 30NO, 20NC, 12VDC w/Resistor | Like 75414 |
| 46 | ||
![]() Wuhan P&S | NVD5863NLT4G | onsemi | Power MOSFET,60V,82A,7.1m��,Single N-CH RoHS : Compliant |
| 20 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |