| Electronic Components Datasheet Search |
|
8282LATCH Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() Avnet Americas | 1587828-2 | TE Connectivity | - Bulk (Alt: 1587828-2) RoHS : Not Compliant |
| 3,000 | |
| MAL211828221E3 | Vishay Intertechnologies | - Tape and Reel (Alt: MAL211828221E3) RoHS : Compliant |
| 400 | ||
| 1-282828-2 | TE Connectivity | - Boxed Product (Development Kits) (Alt: 1-282828-2) RoHS : Compliant |
| 0 | ||
| 282828-2 | TE Connectivity | - Boxed Product (Development Kits) (Alt: 282828-2) RoHS : Compliant |
| 0 | ||
| 2007828-2 | TE Connectivity | - Boxed Product (Development Kits) (Alt: 2007828-2) RoHS : Compliant |
| 0 | ||
| 282828-5 | TE Connectivity | - Boxed Product (Development Kits) (Alt: 282828-5) RoHS : Compliant |
| 0 | ||
| R523482825 | Radiall | SP8 R S18 LSA 12 TL D DS SQ F - Bulk (Alt: R523482825) RoHS : Not Compliant |
| 0 | ||
| M39003/01-8282H | Vishay Intertechnologies | Tantalum Capacitor, 3.3 uF, 75 V, ? 10%, Axial Leaded, D, 4.7 mm, 12.04 mm - Bulk (Alt: M39003/01-8282H) RoHS : Not Compliant |
| 0 | ||
| M83723/82820418(LC) | Amphenol Corporation | - Bulk (Alt: M83723/82820418(LC)) RoHS : Not Compliant |
| 0 | ||
| 1-468282-8 | TE Connectivity | - Bag (Alt: 1-468282-8) RoHS : Not Compliant |
| 0 | ||
| 1-282822-0 | TE Connectivity | - Boxed Product (Development Kits) (Alt: 1-282822-0) RoHS : Compliant |
| 0 | ||
| 282825-7 | TE Connectivity | - Boxed Product (Development Kits) (Alt: 282825-7) RoHS : Compliant |
| 0 | ||
| M83723/82820418 | Amphenol Corporation | - Bulk (Alt: M83723/82820418) RoHS : Not Compliant |
| 0 | ||
| MAL215828222E3 | Vishay Intertechnologies | Aluminum Electrolytic Capacitor, 2200 uF, 63 V, ? 20%, Snap-In - Boxed Product (Development Kits) (Alt: MAL215828222E3) RoHS : Compliant |
| 0 | ||
| ARC6-08-28.2-LU-LD-2-1 | Samtec Inc | B43724A5478M650 - Bulk (Alt: ARC6-08-28.2-LU-LD-2-1) RoHS : Compliant |
| 0 | ||
![]() Newark | 744758282A | Wurth Elektronik | Wirewound Inductor, 820Nh, 0.4A, 1008; |Würth Elektronik 744758282A RoHS : Compliant |
| 1,770 | |
| 744758282A | Wurth Elektronik | Wirewound Inductor, 820Nh, 0.4A, 1008; |Würth Elektronik 744758282A RoHS : Compliant |
| 1,770 | ||
| 1587828-2 | TE Connectivity | Inner Ferrule, Size B, Hva280-2Pi- Pkg Rohs Compliant: Yes |Te Connectivity 1587828-2 RoHS : Compliant |
| 1,000 | ||
| MAL211828221E3 | Vishay Intertechnologies | Cap Alu Elec, 220Uf, 63V, ±20%; |Vishay MAL211828221E3 RoHS : Compliant |
| 713 | ||
| 1828265 | Phoenix Contact | Terminal Block, Pluggable, 4Pos, 10Awg; |Phoenix Contact 1828265 RoHS : Compliant |
| 434 | ||
| 1828281 | Phoenix Contact | Terminal Block, Pluggable, 6Pos, 10Awg; |Phoenix Contact 1828281 RoHS : Compliant |
| 103 | ||
| 08-2823-000-000 | Franz Binder GmbH & Co | Protection Cap, Circular Connector; |Binder 08-2823-000-000 RoHS : Compliant |
| 64 | ||
| 1828278. | Phoenix Contact | Terminal Block, Pluggable, 5Pos, 10Awg; |Phoenix Contact 1828278. RoHS : Compliant |
| 49 | ||
| SF8282-8PG-520 | Switchcraft Conxall | Sf Mini Inline 8#20 Pin Solder Rohs Compliant: Yes |Switchcraft/conxall SF8282-8PG-520 RoHS : Compliant |
| 25 | ||
| 2882828 | Phoenix Contact | Surge Protection Device, 185V, Din Rail; |Phoenix Contact 2882828 RoHS : Compliant |
| 16 | ||
| SD8282 | Fairview Microwave Inc | Rf/Coaxial Connector; |Fairview Microwave SD8282 RoHS : Not Compliant |
| 5 | ||
| 1828278 | Phoenix Contact | Pluggable Terminal Block, 7.62Mm; |Phoenix Contact 1828278 RoHS : Compliant |
| 5 | ||
| 8282 | Lumberg Automation | Rsts 5-183/9 M/ Orange; |Lumberg Automation 8282 RoHS : Not Compliant |
| 0 | ||
| 8282 | Keystone Electronics Corp | Crimp Lug; |Keystone 8282 RoHS : Compliant |
| 0 | ||
| 8282 | Abbatron | Spacer/Standoff, Hex Brass 6.35Mm X 12.7Mm; |Abbatron Hh Smith 8282 RoHS : Compliant |
| 0 | ||
![]() RS | NPQH-L-G18-Q8-P10 (578282) | Festo | L FITTING, NICKEL PLATED BRASS, AIR, G 1/8 PLUG THREAD, FOR 8MM TUBING |
| 98 | |
| 8282 | HH Smith | STANDOFF, HEX, MALE-FEMALE, THREAD 8-32, LENGTH 0.5", OD 0.25", BRASS |
| 86 | ||
| 8282-4PG-3XX | Switchcraft Conxall | MINI-CON CABLE-CABLE #20 SOLDER |
| 55 | ||
| 20982-82 (ST11-PC) | Deltrol Controls | RELAY SOCKET,11 PIN,3 POLE, DIN RAIL/PANEL MOUNT,166ML RELAYS,10A AT 300VAC,3PDT |
| 15 | ||
| 0828282 (CARRIER-TM 300) | Phoenix Contact | LABELING;WIRE MARKER;MARKER CARRIER |
| 13 | ||
| 28828222 | Southwire Company LLC | NONMETALLIC-SHEATHED ROMEX CABLE, 12-2 NM W/G, YELLOW |
| 9 | ||
| 45-2828.2C50.001 | EAO AG | SELECTOR SWITCH ACTUATOR,2 POS.,SHORT HANDLE,90 DEG RIGHT, REST-MAINTAIN, GREEN RoHS : Compliant |
| 9 | ||
| 61828-2RS-HLU (618282RSHLU) | INA Bearings | DEEP GROOVE BALL BEARING, SINGLE ROW, 140MM ID, 175MM OD, 18MM W |
| 6 | ||
| 182824 | RS Pro | CAST IRON STEEL PULLEY 71MM OUTSIDE DIA. 67MM PITCH DIA. 42MM BORE |
| 5 | ||
| 2451828 (25531355) (MPPI02500250-100RS) | RS Pro | SCREW, 1/4-20 X 1/4 PHILLIPS PAN MACHINE, ZINC PLATED |
| 5 | ||
| 2882828 (PT 2-TELE) | Phoenix Contact | INDUSTRIAL SURGE PROTECTOR, 18KA, 185 V DC, DIN RAIL MOUNT |
| 2 | ||
| 682826 | RS Pro | 303S31 STAINLESS STEEL ROD,1M L 6MM DIA |
| 1 | ||
| 45-1828.2C90.001.101 | EAO AG | SELECTOR SWITCH, ON-OFF,1NO,2 POS, MAINT, L/R, METAL, WHITE,10A, SCREW TERMINAL |
| 1 | ||
| 8282 | Keystone Electronics Corp | QUICK-FIT NON-INSULATED MALE TERMINAL RoHS : Compliant |
| 0 | ||
| 8282 | HH Smith | STANDOFF, 1/2 IN., #8-32, BRASS, HEX, ZINC PLATE, 13/32 IN., 7/16 IN. |
| 0 | ||
![]() Rochester Electronics | LV8282PV-MPB-H | onsemi | Motor Driver ICs Driver - Fully Integrated, Control and Power Stage 1A 44-SOP Tube RoHS : Compliant |
| 940 | |
| LV8282PV-TLM-H | onsemi | Motor Driver ICs Driver - Fully Integrated, Control and Power Stage 1A 44-SOP RoHS : Compliant |
| 32,849 | ||
| ADA8282WBCPZ-R7 | Analog Devices Inc | Analog Front End 16 Bits 4 CH SPI 32-QFN T/R RoHS : Compliant |
| 673 | ||
| ADA8282WBCPZ | Analog Devices Inc | Analog Front End 16 Bits 4 CH SPI 32-QFN Tray RoHS : Compliant |
| 80 | ||
| TPS71828-28YZCT | Texas Instruments | IC VOLT REG Fixed 2 REG 2.8V, 2.8V 200mA 6-BGA T/R RoHS : Compliant |
| 45,300 | ||
| TPS71828-28YZCR | Texas Instruments | IC VOLT REG Fixed 2 REG 2.8V, 2.8V 200mA 6-BGA T/R RoHS : Compliant |
| 116,925 | ||
EPF8282VLC84-4![]() | Altera Corporation | FPGAs FLEX 8000 3V 64 I/O 84-LCC RoHS : Not Compliant |
| 1,767 | ||
EPF8282AVTC100-4![]() | Altera Corporation | FPGAs FLEX 8000 4.75V 78 I/O 100-QFP Tray RoHS : Compliant |
| 13 | ||
EPF8282AVTC100-3![]() | Altera Corporation | FPGAs FLEX 8000 4.75V 78 I/O 100-QFP Tray RoHS : Compliant |
| 1,187 | ||
AT89LP828-20AU![]() | Atmel Corporation | IC MCU 8051 8Bit 1 Core FLASH 8kB (8k x 8) 20MHz 32-QFP Tray RoHS : Compliant |
| 2,240 | ||
AT89LP828-20JU![]() | Atmel Corporation | Microcontroller, 8-Bit, FLASH, 8051 CPU, 20MHz, CMOS, PQCC32 RoHS : Compliant |
| 159 | ||
| AT89LP828-20MH | Atmel Corporation | Microcontroller, 8-Bit, FLASH, 20MHz RoHS : Compliant |
| 189 | ||
| ISL8282MFRZ | Renesas Electronics Corporation | Off-Line Power Supply Evaluation Board 500mV to 5V ISL8282M Tray RoHS : Compliant |
| 716 | ||
| SI8282BD-IS | Skyworks Solutions Inc | SI8282BD - Automotive Isolated SiC and IGBT driver with integrated dc-dc RoHS : Compliant |
| 1,208 | ||
| SI8282CC-IS | Skyworks Solutions Inc | SI8282CC - Automotive Isolated SiC and IGBT driver with integrated dc-dc RoHS : Compliant |
| 416 | ||
![]() Sager | 8282 | Keystone Electronics Corp | Terminals MALE CRIMP LUG RoHS : Compliant |
| 0 | |
| 0828282 | Phoenix Contact | Terminal Block Tools & Accessories CARRIER-TM 300 RoHS : Compliant |
| 0 | ||
| 1-282828-2 | TE Connectivity | Pluggable Terminal Blocks TERMI-BLOK HEADER ASSY90 13P. RoHS : Compliant |
| 0 | ||
| 282828-2 | TE Connectivity | Pluggable Terminal Blocks TERMI-BLOK HEADER ASSY90 2P. RoHS : Compliant |
| 0 | ||
| 2-468282-2 | TE Connectivity | Bench Top Tools CRIMPER, INSULATION (.200 ) | 0 | |||
| 2007828-2 | TE Connectivity | High Speed / Modular Connectors 192POS 12R PART SHRD HDR BRD/BRD R/A VT RoHS : Compliant |
| 0 | ||
| 1482827-12 | Honeywell Sensing and Control / MICRO SWITCH | Sensor Hardware & Accessories CAP |
| 0 | ||
| 45-1828.2C90.001.101 | EAO AG | Rotary Switches L-R Short 90V WH 1NO On-Off Scrw Trm Mtl |
| 0 | ||
| 282828-5 | TE Connectivity | Pluggable Terminal Blocks TERMI-BLOK HEADER ASSY90 5P.5 RoHS : Compliant |
| 0 | ||
| PP11-51-20.0A-30828-2-V | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
| SF8282-2PG-520 | Switchcraft Conxall | Standard Circular Connector SF MINI INLINE 2#20 PIN SOLDER |
| 0 | ||
| 2266828-2 | TE Connectivity | Bench Top Tools OCEAN-2.0-APPLICATOR -S-130F230O | 0 | |||
| 18282-3SG-311 | Switchcraft Conxall | Standard Circular Connector 3P SOCKET CBL TO CBL O.D.=.09-.14 RoHS : Compliant |
| 0 | ||
| 1-468282-8 | TE Connectivity | Bench Top Tools CRIMPER INSULATION |
| 0 | ||
| W8282-3SG-P-528 | Switchcraft Conxall | Standard Circular Connector 3#20 F Long Backshell .28 Grommet Size |
| 0 | ||
![]() TME | 282825-4 | TE Connectivity | Connector: pluggable terminal block; male; power supply; 15A RoHS : Compliant |
| 2,550 | |
| 8282 | Keystone Electronics Corp | Terminal: flat; 6.4mm; 0.8mm; male; crimped; for cable; straight RoHS : Compliant |
| 68 | ||
| 468282-1 | TE Connectivity | Crimping tool: dedicated; Ocean RoHS : Compliant |
| 2 | ||
| 1828282 | Gedore Torque Ltd | Protective gloves; Size: 10; red; latex; insulated |
| 0 | ||
| 1828274 | Gedore Torque Ltd | Protective gloves; Size: 9; red; latex; insulated |
| 0 | ||
| 45-2828.2C20.001 | EAO AG | Switch: rotary; 22mm; Stabl.pos: 2; red; none; IP66,IP67,IP69K; 45 RoHS : Compliant |
| 0 | ||
| 00828 22 000 200 | RECA | Screw; M8; M8x22; Head: cheese head; hex key; HEX 6mm; steel; none |
| 0 | ||
| 45-2828.2C30.001 | EAO AG | Switch: rotary; 22mm; Stabl.pos: 2; amber; none; IP66,IP67,IP69K RoHS : Compliant |
| 0 | ||
| 468282-2 | TE Connectivity | Crimping tool: dedicated RoHS : Compliant |
| 0 | ||
| 558282 | Festo | Pneumatic tubing; -0.95÷10bar; PUN-H; Tube in.diam: 8mm; silver |
| 0 | ||
| 44428282 | Lapp Group | Cable: solar; EPIC® SOLAR 4 GEN2; solar male,solar female; 4m |
| 0 | ||
| 62.82.8.230.4009 | FINDER SpA | Relay: electromagnetic power; Ucoil: 230VAC; DPDT; Icoil: 10.5mA |
| 0 | ||
| M80-8282022P | Harwin | Connector: wire-wire/PCB; socket; male; data; Datamate L-Tek; 3A RoHS : Not Compliant |
| 0 | ||
| M80-8282622 | Harwin | Connector: wire-wire/PCB; socket; male; data; Datamate L-Tek; 3A RoHS : Not Compliant |
| 0 | ||
| BFC246828225 | Vishay Intertechnologies | Capacitor: polypropylene; 2.2uF; 400VDC; 220VAC; 14x27x30mm; THT RoHS : Compliant |
| 0 | ||
![]() Ameya Holding Limited | TPSM82823ASILR | Texas Instruments | RoHS : Compliant | 15,000 | ||
TPSM82822SILR![]() | Texas Instruments | RoHS : Compliant | 9,000 | |||
| TPSM82823SILR | Texas Instruments | RoHS : Compliant | 6,000 | |||
TPSM82821SILR![]() | Texas Instruments | RoHS : Compliant | 6,000 | |||
| TPSM82822ASILR | Texas Instruments | RoHS : Compliant | 157 | |||
![]() ComSIT USA | TPSM828224SILR | Texas Instruments | AVAILABLE EU RoHS : Compliant | 5,233 | ||
![]() ComSIT USA | SAB8282AP | Siemens | OCTAL LATCH D Latch, 1-Func, 8-Bit, Bipolar, PDIP20 RoHS : Not Compliant | 14,603 | ||
| 8282143 | TE Connectivity | MODU II PIN HEADER ECONOMY LINE Board Connector, 3 Contact(s), 1 Row(s), Male, Straight, 0.1 inch Pitch, Solder Terminal, Green Insulator, Receptacle RoHS : Compliant | 3,000 | |||
| MBL8282CZG | FUJITSU Limited | D Latch, 1-Func, 8-Bit, Bipolar, CDIP20 RoHS : Not Compliant | 1,756 | |||
| EPF8282ALC844 | Altera Corporation | PROGRAMMABLE LOGIC DEVICE Loadable PLD, CMOS, PQCC84 RoHS : Not Compliant | 477 | |||
| AT89LP82820PU | Atmel Corporation | IC MCU 8051 8Bit 1 Core FLASH 8kB (8k x 8) 20MHz 28-DIP Tube RoHS : Not Compliant | 476 | |||
| EPF8282ATC1002N | Altera Corporation | PROGRAMMABLE LOGIC DEVICE Loadable PLD, CMOS, PQFP100 RoHS : Compliant | 162 | |||
| EPF8282AVTC1004 | Altera Corporation | PROGRAMMABLE LOGIC DEVICE Loadable PLD, CMOS, PQFP100 RoHS : Not Compliant | 52 | |||
| EPF8282ATC1003N | Altera Corporation | PROGRAMMABLE LOGIC DEVICE Loadable PLD, CMOS, PQFP100 RoHS : Compliant | 18 | |||
| EPF8282ATC1004N | Altera Corporation | PROGRAMMABLE LOGIC DEVICE Loadable PLD, CMOS, PQFP100 RoHS : Compliant | 17 | |||
| EPF8282ALC843 | Altera Corporation | PROGRAMMABLE LOGIC DEVICE Loadable PLD, CMOS, PQCC84 RoHS : Not Compliant | 14 | |||
| EPF8282VLC844 | Altera Corporation | 3.3-VOLT FLEX 8000 PROGRAMMABLE LOGIC DEVICE Loadable PLD, CMOS, PQCC84 RoHS : Not Compliant | 13 | |||
| EPF8282VLC843 | Altera Corporation | 3.3-VOLT FLEX 8000 PROGRAMMABLE LOGIC DEVICE Loadable PLD, CMOS, PQCC84 RoHS : Not Compliant | 9 | |||
| EPF8282LC842 | Altera Corporation | Loadable PLD, CMOS, PQCC84 RoHS : Not Compliant | 5 | |||
| EPF8282ATC1003 | Altera Corporation | PROGRAMMABLE LOGIC DEVICE Loadable PLD, CMOS, PQFP100 RoHS : Not Compliant | 5 | |||
| EPF8282ATC1002 | Altera Corporation | PROGRAMMABLE LOGIC DEVICE Loadable PLD, CMOS, PQFP100 RoHS : Not Compliant | 1 | |||
![]() Interstate Connecting Components | W8282-3SG-P-528 | Switchcraft Conxall | MINICON-X 3#20 FM,CBL-CBL LNG BCKSHL,.28 GRMT |
| 6 | |
| W8282-2PG-P-528 | Switchcraft Conxall | MINICON-X 2#20 M,CBL-CBL LNG BCKSHL,.28 GRMT |
| 6 | ||
| 1-282828-2 | TE Connectivity | TERMI-BLOK HEADER,ASSY90 12P. RoHS : Compliant |
| 0 | ||
| 282828-2 | TE Connectivity | TERMI-BLOK HEADERASSY90 2P. RoHS : Compliant |
| 0 | ||
| 2007828-2 | TE Connectivity | IMP100S,H,V4P16C,RG,OEW46,4.9 RoHS : Compliant |
| 0 | ||
| 282828-5 | TE Connectivity | TERMI-BLOK HEADER,ASSY90 5P. RoHS : Compliant |
| 0 | ||
| 1-468282-8 | TE Connectivity |
| 0 | |||
| 1-282822-0 | TE Connectivity | TERMI-BLOK HEADERASSY90 10P. RoHS : Compliant |
| 0 | ||
| 282825-7 | TE Connectivity | TERMI-BLOK HEADERASSY90 7P.5 RoHS : Compliant |
| 0 | ||
| G61658-282 | Glenair Inc | 0 | ||||
| 10-072828-20P | Amphenol Industrial Operations | 10-072828-20P PLUG | 0 | |||
| 10-072828-20P | Amphenol Industrial Operations | Solder Angle Plug, OD |
| 0 | ||
| 1-282828-1 | TE Connectivity | TERMI-BLOK HEADER,ASSY90 11P. RoHS : Compliant |
| 0 | ||
| 282822-6 | TE Connectivity | TERMI-BLOK HEADERASSY90 6P. RoHS : Compliant |
| 0 | ||
| 2378282-1 | TE Connectivity | STD TIMER CONTACT RoHS : Compliant | 0 | |||
![]() PEI Genesis | GTC08-28-21PX-025-B30-LC | Amphenol Corporation |
| 76 | ||
| GTC08-28-22SX-025 | Amphenol Corporation |
| 0 | |||
| GTS08-28-20SX | Amphenol Corporation |
| 0 | |||
| GTC08-28-20S-B30 | Amphenol Corporation |
| 0 | |||
| GTC08-28-21P | Amphenol Corporation |
| 0 | |||
| GTS08-28-21PX | Amphenol Corporation |
| 0 | |||
| GTS08-28-21S-116 | Amphenol Corporation |
| 0 | |||
| GTS08-28-21SX-025-116 | Amphenol Corporation |
| 0 | |||
| GTS08-28-22S | Amphenol Corporation |
| 0 | |||
| ABS1358-28-28C | SOURIAU-SUNBANK |
| 0 | |||
| GTC08-28-20PZ-025-LC | Amphenol Corporation |
| 0 | |||
| GTC08-28-20SW-025 | Amphenol Corporation |
| 0 | |||
| GTC08-28-20SW-025-B30-LC | Amphenol Corporation |
| 0 | |||
| GTC08-28-20SW-LC | Amphenol Corporation |
| 0 | |||
| GTC08-28-22SW-025-B30-LC | Amphenol Corporation |
| 0 | |||
![]() Chip 1 Exchange | FW82820PC600 | Intel Corporation | INSTOCK | 720 | ||
| FW82820PC600 | INSTOCK | 360 | ||||
FW82820![]() | Intel Corporation | INSTOCK RoHS : Not Compliant | 296 | |||
| SAB8282AP | INSTOCK | 280 | ||||
EPF8282ATC100-4![]() | Altera Corporation | INSTOCK RoHS : Not Compliant | 191 | |||
EPF8282AVTC100-4![]() | Altera Corporation | INSTOCK RoHS : Not Compliant | 141 | |||
| EPF8282ALC843 | Altera Corporation | INSTOCK | 90 | |||
| EPF8282ATC100-4 | INSTOCK | 73 | ||||
| 87368-2820 | INSTOCK | 65 | ||||
| EPF8282ALC84-4 | INSTOCK | 12 | ||||
| MBL8282 | FUJITSU Semiconductor Limited | INSTOCK | 5 | |||
![]() Avnet Abacus | BFC246828224 | Vishay Intertechnologies | General Purpose Film Capacitor Metallized PET Radial Box 2 Pin 022 uF 10 220 V 400 V (Alt: BFC246828224) RoHS : Compliant | 1,500 | ||
| M80-8282642 | Harwin | Pin Header Latched BoardtoBoard WiretoBoard 2 mm 2 Rows 26 Contacts Surface Mount (Alt: M80-8282642) RoHS : Compliant | 728 | |||
| 1828265 | Phoenix Contact | PC 4 4STF762 PC44STF762 (Alt: 1828265) RoHS : Compliant | 150 | |||
| 1828249 | Phoenix Contact | PC 4 2STF762 PC42STF762 (Alt: 1828249) RoHS : Compliant | 150 | |||
| 1828252 | Phoenix Contact | Pluggable Terminal Block 762 mm 3 Ways 24 AWG 10 AWG 4 mm Screw (Alt: 1828252) RoHS : Compliant | 50 | |||
| 1882829 | Phoenix Contact | MSTB 25 2GF508 ABGY MSTB252GF508ABGY (Alt: 1882829) RoHS : Compliant | 0 | |||
| 282828-2 | TE Connectivity | Conn Shrouded Header HDR 2 POS 1016mm Solder ST ThruHole (Alt: 282828-2) RoHS : Compliant | 0 | |||
| 282828-2 | TE Connectivity | Conn Shrouded Header HDR 2 POS 1016mm Solder ST ThruHole (Alt: 282828-2) RoHS : Compliant | 0 | |||
| 282828-5 | TE Connectivity | (Alt: 282828-5) RoHS : Compliant | 0 | |||
| 2007828-2 | TE Connectivity | (Alt: 2007828-2) RoHS : Compliant | 0 | |||
| 1989828-2 | TE Connectivity | HEADER ASSEMBLY MQS 18P (Alt: 1989828-2) RoHS : Compliant | 0 | |||
| 1-282828-2 | TE Connectivity | (Alt: 1-282828-2) RoHS : Compliant | 0 | |||
| 1-468282-8 | TE Connectivity | (Alt: 1-468282-8) RoHS : Not Compliant | 0 | |||
| 1-468282-8 | TE Connectivity | (Alt: 1-468282-8) RoHS : Not Compliant | 0 | |||
| 1-282822-0 | TE Connectivity | Conn Shrouded Header HDR 10 POS 5mm Solder ST ThruHole (Alt: 1-282822-0) RoHS : Compliant | 0 | |||
![]() Avnet Asia | 2391828-2 | TE Connectivity | ECONOMY POWER 2.5 PLUG HOUSING, 2P (Alt: 2391828-2) RoHS : Compliant | 0 | ||
| 2541828-2 | TE Connectivity | (Alt: 2541828-2) RoHS : Compliant | 0 | |||
| 282828-4 | TE Connectivity | (Alt: 282828-4) RoHS : Compliant |
| 0 | ||
![]() Component Electronics, Inc | 8238-282-19333 | Philips Semiconductors | IN STOCK SHIP TODAY |
| 8,000 | |
| 8282 | GC Electronics | IN STOCK SHIP TODAY |
| 250 | ||
| 00-8282-0000 | GC Electronics | IN STOCK SHIP TODAY |
| 250 | ||
| 00-8282-0100 | GC Electronics | IN STOCK SHIP TODAY |
| 250 | ||
| DCP-2828-25-OR | IN STOCK SHIP TODAY | 200 | ||||
| TDA18282 | Philips Semiconductors | IN STOCK SHIP TODAY | 100 | |||
| 8238-282-19273 | Philips Semiconductors | IN STOCK SHIP TODAY |
| 70 | ||
| 8282-5PG-522 | Switchcraft Conxall | IN STOCK SHIP TODAY RoHS : Compliant |
| 50 | ||
| 8282-7PG-522 | Switchcraft Conxall | IN STOCK SHIP TODAY RoHS : Compliant |
| 38 | ||
| 1828249 | Phoenix Contact | IN STOCK SHIP TODAY RoHS : Compliant |
| 30 | ||
| BFC246828225 | Vishay Intertechnologies | IN STOCK SHIP TODAY RoHS : Compliant | 28 | |||
| 1828265 | Phoenix Contact | IN STOCK SHIP TODAY RoHS : Compliant |
| 17 | ||
| 8282-2SG-3DC | Switchcraft Conxall | IN STOCK SHIP TODAY |
| 15 | ||
| 8282-2SG-3XX | Switchcraft Conxall | IN STOCK SHIP TODAY |
| 9 | ||
EPF8282ATC100-4![]() | Altera Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 1 | ||
![]() Master Electronics | 8282 | HH Smith | Brass Male/Female Hex Standoff - 8-32 Thread - 1/2 Length. RoHS : Compliant |
| 432 | |
| 8282 | GC Electronics | Alignment Tool RoHS : Compliant |
| 185 | ||
| 1-282828-2 | TE Connectivity | TERMI-BLOK HEADER ASSY90 12P. RoHS : Compliant |
| 0 | ||
| 282828-2 | TE Connectivity | TERMI-BLOK HEADER ASSY90 2P. MOQ Reduction RoHS : Compliant |
| 0 | ||
| 0828282 | Phoenix Contact | Marker carriers - gray - unlabeled - mounting type: snap into flat marker groove - lettering field size: 10.5 x 300 mm RoHS : Compliant |
| 0 | ||
| 2-468282-2 | TE Connectivity | CRIMPER INSULATION (.200 ) RoHS : Not Compliant |
| 0 | ||
| 2007828-2 | TE Connectivity | Conn High Density HDR 192 POS 1.9mm Press Fit ST Thru-Hole Tube MOQ Reduction RoHS : Compliant |
| 0 | ||
| 1482827-12 | Honeywell Sensing and Control | Cap RoHS : Compliant |
| 0 | ||
| 282828-5 | TE Connectivity | TERMI-BLOK HEADER ASSY90 5P. MOQ Reduction RoHS : Compliant |
| 0 | ||
| IEGBX6-33828-25-V | Sensata Circuit Breakers | Circuit Breakers Cir Brkr Hyd Mag RoHS : Compliant |
| 0 | ||
| FW-02-03-S-D-118-282 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 2266828-2 | TE Connectivity | OCEAN-2.0-APPLICATOR-S-130F230O RoHS : Not Compliant |
| 0 | ||
| 1-468282-8 | TE Connectivity | CRIMPER INSULATION RoHS : Not Compliant |
| 0 | ||
| 0828205 | Phoenix Contact | Marker for terminal blocks - Sheet - red - unlabeled - can be labeled with: BLUEMARK ID - BLUEMARK ID COLOR - BLUEMARK CLED - PLOTMARK - CMS-P1-PLOTTER - mounting type: snap into flat marker groove - for terminal block width: 5 mm - lettering field size: 4.45 x 5.2 mm - Number of individual labels: 96 RoHS : Compliant |
| 0 | ||
| 1-282822-0 | TE Connectivity | TERMI-BLOK HEADER ASSY90 10P. RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3W10828-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: MCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MCX, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG188-DS, RF Cable Type: RG188-DS, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. MCX Plug Right Angle to MCX Jack Cable 24 Inch Length Using RG188-DS Coax., Radio frequency assembly MCX plug right angle to MCX jack cable 24 inch length using RG188-DS coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The MCX plug right angle to MCX jack cable 24 inch length using RG188-DS coax, MCX cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MCX to MCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle MCX cable connection on one end and MCX cable connection on the other. Our right angle MCX to MCX cable assemblies have a plug gender on end 1 and jack on end 2. PE3W10828-24 can also be known as a right angle MCX male to MCX female cable assembly and will be shipped same-day as it is purchased. MCX male to MCX female cable assembly PE3W10828-24 is built with RG188-DS which is a flexible coax type. The Pasternack flexible MCX cable assembly is manufactured with right angle MCX to MCX cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this MCX right angle plug to MCX jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W10828-24 can also be used in the other direction and will be MCX jack to right angle MCX plug cable assembly if the opposite connectivity is required. MCX right angle male to MCX female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MCX to MCX cable assembly for quick shipment worldwide. Variations of MCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MCX plug right angle to MCX jack cable 24 inch length using RG188-DS coax. |
| 188 | |
| PE3C9828-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-240, RF Cable Type: TCOM-240, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. N Male to SMA Male Low Loss Cable 24 Inch Length Using TCOM-240 Coax with Times Microwave Components., Radio frequency assembly N male to SMA male low loss cable 24 inch length using TCOM-240 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to SMA male low loss cable 24 inch length using TCOM-240 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and SMA cable connection on the other. Our low loss type N to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3C9828-24 can also be known as a low loss N type plug to SMA plug cable assembly and will be shipped same-day as it is purchased. Type N plug to SMA plug cable assembly PE3C9828-24 is built with TCOM-240 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency type N male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C9828-24 can also be used in the other direction and will be SMA male to type N male cable assembly if the opposite connectivity is required. Low loss N type plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to SMA male low loss cable 24 inch length using TCOM-240 coax with Times Microwave components. |
| 10 | ||
| PE3W09828-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 4 Hole Flange, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. N Female 4 Hole Flange to SMA Male Cable 24 Inch Length Using RG142 Coax., Radio frequency assembly N female 4 hole flange to SMA male cable 24 inch length using RG142 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The N female 4 hole flange to SMA male cable 24 inch length using RG142 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a type N 4 hole flange cable connection on one end and a SMA cable connection on the other. Our type N to SMA cable assembly has a female gender on end 1 and a male on end 2. PE3W09828-24 can also be known as a type N jack to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W09828-24 RF cable has a FEP jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The flexible RF cable has a between series connection. Our 4 hole flange type N female to SMA male cable has a maximum VSWR of 1.4:1. Type N jack to SMA plug cable assembly PE3W09828-24 is built with RG142 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the clamp/solder attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W09828-24 can also be used in the other direction and will be a SMA male to type N female 4 hole flange cable assembly if the opposite connectivity is required. Type N jack 4 hole flange to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of type N and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to SMA RF cable assembly as per your requirements. |
| 8 | ||
| PE3C8282-150CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.1/9.5 Mini DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.3-10, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length: 59.06 inches. 4.1/9.5 Mini DIN Male to Snap-On 4.3-10 Male Low PIM Cable 150 CM Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 4.1/9.5 mini DIN male to snap-on 4.3-10 male low PIM cable 150 cm length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 4.1/9.5 mini DIN male to snap-on 4.3-10 male low PIM cable 150 cm length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.1/9.5 mini DIN to 4.3-10 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.1/9.5 mini DIN cable connection on one end and 4.3-10 cable connection on the other. Our low PIM 4.1/9.5 mini DIN to 4.3-10 cable assemblies have a male gender on end 1 and male on end 2. This 4.1/9.5 mini DIN to 4.3-10 cable is a male to male coax assembly, PE3C8282-150CM, can also be known as a low PIM 4.1/9.5 mini DIN plug to 4.3-10 plug cable assembly and will be shipped same-day as it is purchased. 4.1/9.5 mini DIN plug to 4.3-10 plug cable assembly PE3C8282-150CM is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.1/9.5 Mini DIN cable assembly is manufactured with 4.1/9.5 mini DIN to 4.3-10 cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency low PIM 4.1/9.5 mini DIN male to 4.3-10 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8282-150CM can also be used in the other direction and will be 4.3-10 male to 4.1/9.5 mini DIN male cable assembly if the opposite connectivity is required. Low PIM 4.1/9.5 mini DIN plug to 4.3-10 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.1/9.5 mini DIN to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.1/9.5 mini DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 4.1/9.5 mini DIN male to snap-on 4.3-10 male low PIM cable 150 cm length using TFT-5G-402 coax using Times Microwave components. |
| 0 | ||
| PE3C7828-200CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.3-10, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm, Length: 78.74 inches. 4.3-10 Male to 4.3-10 Female Low PIM Cable 200 CM Length Using 1/4 inch Superflexible Coax., Radio frequency assembly 4.3-10 male to 4.3-10 female low PIM cable 200 cm length using 1/4 inch superflexible coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 4.3-10 male to 4.3-10 female low PIM cable 200 cm length using 1/4 inch superflexible coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.3-10 to 4.3-10 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.3-10 cable connection on one end and 4.3-10 cable connection on the other. Our low PIM 4.3-10 to 4.3-10 cable assemblies have a male gender on end 1 and female on end 2. This 4.3-10 to 4.3-10 cable is a male to female coax assembly, PE3C7828-200CM, can also be known as a low PIM 4.3-10 plug to 4.3-10 jack cable assembly and will be shipped same-day as it is purchased. 4.3-10 plug to 4.3-10 jack cable assembly PE3C7828-200CM is built with 1/4" superflexible which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 4.3-10 cable assembly is manufactured with 4.3-10 to 4.3-10 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM 4.3-10 male to 4.3-10 female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7828-200CM can also be used in the other direction and will be 4.3-10 female to 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 plug to 4.3-10 jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 4.3-10 male to 4.3-10 female low PIM cable 200 cm length using 1/4 inch superflexible coax. |
| 0 | ||
| PE3W08282/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm. TNC Female Bulkhead to Reverse Polarity TNC Male Cable Using RG223 Coax with HeatShrink. PE3W08282/HS is a TNC female bulkhead to reverse polarity TNC male cable using RG223 coax. This Pasternack TNC female bulkhead to reverse polarity TNC male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm TNC for connector 2. Our female TNC bulkhead to reverse polarity male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W08282/HS TNC female bulkhead to TNC reverse polarity male cable assembly is constructed with RG223 coax. | 0 | |||
| PE3C8282-200CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.1/9.5 Mini DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.3-10, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length: 78.74 inches. 4.1/9.5 Mini DIN Male to Snap-On 4.3-10 Male Low PIM Cable 200 CM Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 4.1/9.5 mini DIN male to snap-on 4.3-10 male low PIM cable 200 cm length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 4.1/9.5 mini DIN male to snap-on 4.3-10 male low PIM cable 200 cm length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.1/9.5 mini DIN to 4.3-10 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.1/9.5 mini DIN cable connection on one end and 4.3-10 cable connection on the other. Our low PIM 4.1/9.5 mini DIN to 4.3-10 cable assemblies have a male gender on end 1 and male on end 2. This 4.1/9.5 mini DIN to 4.3-10 cable is a male to male coax assembly, PE3C8282-200CM, can also be known as a low PIM 4.1/9.5 mini DIN plug to 4.3-10 plug cable assembly and will be shipped same-day as it is purchased. 4.1/9.5 mini DIN plug to 4.3-10 plug cable assembly PE3C8282-200CM is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.1/9.5 Mini DIN cable assembly is manufactured with 4.1/9.5 mini DIN to 4.3-10 cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency low PIM 4.1/9.5 mini DIN male to 4.3-10 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8282-200CM can also be used in the other direction and will be 4.3-10 male to 4.1/9.5 mini DIN male cable assembly if the opposite connectivity is required. Low PIM 4.1/9.5 mini DIN plug to 4.3-10 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.1/9.5 mini DIN to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.1/9.5 mini DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 4.1/9.5 mini DIN male to snap-on 4.3-10 male low PIM cable 200 cm length using TFT-5G-402 coax using Times Microwave components. |
| 0 | ||
| PE38282 | Pasternack Enterprises | 0 | ||||
| PE3C8282-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.1/9.5 Mini DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.3-10, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length: 12 inches. 4.1/9.5 Mini DIN Male to Snap-On 4.3-10 Male Low PIM Cable 12 Inch Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 4.1/9.5 mini DIN male to snap-on 4.3-10 male low PIM cable 12 inch length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 4.1/9.5 mini DIN male to snap-on 4.3-10 male low PIM cable 12 inch length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.1/9.5 mini DIN to 4.3-10 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.1/9.5 mini DIN cable connection on one end and 4.3-10 cable connection on the other. Our low PIM 4.1/9.5 mini DIN to 4.3-10 cable assemblies have a male gender on end 1 and male on end 2. This 4.1/9.5 mini DIN to 4.3-10 cable is a male to male coax assembly, PE3C8282-12, can also be known as a low PIM 4.1/9.5 mini DIN plug to 4.3-10 plug cable assembly and will be shipped same-day as it is purchased. 4.1/9.5 mini DIN plug to 4.3-10 plug cable assembly PE3C8282-12 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.1/9.5 Mini DIN cable assembly is manufactured with 4.1/9.5 mini DIN to 4.3-10 cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency low PIM 4.1/9.5 mini DIN male to 4.3-10 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8282-12 can also be used in the other direction and will be 4.3-10 male to 4.1/9.5 mini DIN male cable assembly if the opposite connectivity is required. Low PIM 4.1/9.5 mini DIN plug to 4.3-10 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.1/9.5 mini DIN to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.1/9.5 mini DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 4.1/9.5 mini DIN male to snap-on 4.3-10 male low PIM cable 12 inch length using TFT-5G-402 coax using Times Microwave components. |
| 0 | ||
| PE3C8282-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.1/9.5 Mini DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.3-10, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length: 48 inches. 4.1/9.5 Mini DIN Male to Snap-On 4.3-10 Male Low PIM Cable 48 Inch Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 4.1/9.5 mini DIN male to snap-on 4.3-10 male low PIM cable 48 inch length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 4.1/9.5 mini DIN male to snap-on 4.3-10 male low PIM cable 48 inch length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.1/9.5 mini DIN to 4.3-10 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.1/9.5 mini DIN cable connection on one end and 4.3-10 cable connection on the other. Our low PIM 4.1/9.5 mini DIN to 4.3-10 cable assemblies have a male gender on end 1 and male on end 2. This 4.1/9.5 mini DIN to 4.3-10 cable is a male to male coax assembly, PE3C8282-48, can also be known as a low PIM 4.1/9.5 mini DIN plug to 4.3-10 plug cable assembly and will be shipped same-day as it is purchased. 4.1/9.5 mini DIN plug to 4.3-10 plug cable assembly PE3C8282-48 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.1/9.5 Mini DIN cable assembly is manufactured with 4.1/9.5 mini DIN to 4.3-10 cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency low PIM 4.1/9.5 mini DIN male to 4.3-10 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8282-48 can also be used in the other direction and will be 4.3-10 male to 4.1/9.5 mini DIN male cable assembly if the opposite connectivity is required. Low PIM 4.1/9.5 mini DIN plug to 4.3-10 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.1/9.5 mini DIN to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.1/9.5 mini DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 4.1/9.5 mini DIN male to snap-on 4.3-10 male low PIM cable 48 inch length using TFT-5G-402 coax using Times Microwave components. |
| 0 | ||
| PE3C8282-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.1/9.5 Mini DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.3-10, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length: 24 inches. 4.1/9.5 Mini DIN Male to Snap-On 4.3-10 Male Low PIM Cable 24 Inch Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 4.1/9.5 mini DIN male to snap-on 4.3-10 male low PIM cable 24 inch length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 4.1/9.5 mini DIN male to snap-on 4.3-10 male low PIM cable 24 inch length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.1/9.5 mini DIN to 4.3-10 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.1/9.5 mini DIN cable connection on one end and 4.3-10 cable connection on the other. Our low PIM 4.1/9.5 mini DIN to 4.3-10 cable assemblies have a male gender on end 1 and male on end 2. This 4.1/9.5 mini DIN to 4.3-10 cable is a male to male coax assembly, PE3C8282-24, can also be known as a low PIM 4.1/9.5 mini DIN plug to 4.3-10 plug cable assembly and will be shipped same-day as it is purchased. 4.1/9.5 mini DIN plug to 4.3-10 plug cable assembly PE3C8282-24 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.1/9.5 Mini DIN cable assembly is manufactured with 4.1/9.5 mini DIN to 4.3-10 cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency low PIM 4.1/9.5 mini DIN male to 4.3-10 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8282-24 can also be used in the other direction and will be 4.3-10 male to 4.1/9.5 mini DIN male cable assembly if the opposite connectivity is required. Low PIM 4.1/9.5 mini DIN plug to 4.3-10 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.1/9.5 mini DIN to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.1/9.5 mini DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 4.1/9.5 mini DIN male to snap-on 4.3-10 male low PIM cable 24 inch length using TFT-5G-402 coax using Times Microwave components. |
| 0 | ||
| PE3W18282 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: NMO Mount, Connector Gender 2: Sexless, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm. Reverse Polarity TNC Male to NMO Mount Sexless Cable Using RG142 Coax. PE3W18282 is a reverse polarity TNC male to NMO Mount sexless cable using RG142 coax. This Pasternack reverse polarity TNC male to NMO Mount sexless cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm NMO Mount for connector 2. Our reverse polarity male TNC to sexless NMO Mount cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W18282 TNC reverse polarity male to NMO Mount sexless cable assembly is constructed with RG142 coax. | 0 | |||
| PE3828-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm, Length: 24 inches. SMA Male to N Male Cable 24 Inch Length Using RG405 Coax., Radio frequency assembly SMA male to N male cable 24 inch length using RG405 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to N male cable 24 inch length using RG405 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to N type cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and type N cable connection on the other. Our SMA to type N cable assemblies have a male gender on end 1 and male on end 2. This SMA to type N cable is a male to male coax assembly, PE3828-24, can also be known as a SMA plug to type N plug cable assembly and will be shipped same-day as it is purchased. SMA plug to N type plug cable assembly PE3828-24 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3828-24 can also be used in the other direction and will be N type male to SMA male cable assembly if the opposite connectivity is required. SMA plug to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to N male cable 24 inch length using RG405 coax. |
| 0 | ||
| PE3C8282 | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.1/9.5 Mini DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.3-10, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm. 4.1/9.5 Mini DIN Male to 4.3-10 Male Low PIM Cable Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 4.1/9.5 mini DIN male to 4.3-10 male low PIM cable using TFT-5G-402 coax using Times Microwave components from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 4.1/9.5 mini DIN male to 4.3-10 male low PIM cable using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.1/9.5 mini DIN to 4.3-10 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.1/9.5 mini DIN cable connection on one end and 4.3-10 cable connection on the other. Our low PIM 4.1/9.5 mini DIN to 4.3-10 cable assemblies have a male gender on end 1 and male on end 2. This 4.1/9.5 mini DIN to 4.3-10 cable is a male to male coax assembly, PE3C8282, can also be known as a low PIM 4.1/9.5 mini DIN plug to 4.3-10 plug cable assembly and will be shipped same-day as it is purchased. 4.1/9.5 mini DIN plug to 4.3-10 plug cable assembly PE3C8282 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.1/9.5 Mini DIN cable assembly is manufactured with 4.1/9.5 mini DIN to 4.3-10 cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency low PIM 4.1/9.5 mini DIN male to 4.3-10 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8282 can also be used in the other direction and will be 4.3-10 male to 4.1/9.5 mini DIN male cable assembly if the opposite connectivity is required. Low PIM 4.1/9.5 mini DIN plug to 4.3-10 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.1/9.5 mini DIN to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.1/9.5 mini DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 4.1/9.5 mini DIN male to 4.3-10 male low PIM cable using TFT-5G-402 coax using Times Microwave components. | 0 | |||
| PE3C8282-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.1/9.5 Mini DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.3-10, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length: 36 inches. 4.1/9.5 Mini DIN Male to Snap-On 4.3-10 Male Low PIM Cable 36 Inch Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 4.1/9.5 mini DIN male to snap-on 4.3-10 male low PIM cable 36 inch length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 4.1/9.5 mini DIN male to snap-on 4.3-10 male low PIM cable 36 inch length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.1/9.5 mini DIN to 4.3-10 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.1/9.5 mini DIN cable connection on one end and 4.3-10 cable connection on the other. Our low PIM 4.1/9.5 mini DIN to 4.3-10 cable assemblies have a male gender on end 1 and male on end 2. This 4.1/9.5 mini DIN to 4.3-10 cable is a male to male coax assembly, PE3C8282-36, can also be known as a low PIM 4.1/9.5 mini DIN plug to 4.3-10 plug cable assembly and will be shipped same-day as it is purchased. 4.1/9.5 mini DIN plug to 4.3-10 plug cable assembly PE3C8282-36 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.1/9.5 Mini DIN cable assembly is manufactured with 4.1/9.5 mini DIN to 4.3-10 cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency low PIM 4.1/9.5 mini DIN male to 4.3-10 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8282-36 can also be used in the other direction and will be 4.3-10 male to 4.1/9.5 mini DIN male cable assembly if the opposite connectivity is required. Low PIM 4.1/9.5 mini DIN plug to 4.3-10 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.1/9.5 mini DIN to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.1/9.5 mini DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 4.1/9.5 mini DIN male to snap-on 4.3-10 male low PIM cable 36 inch length using TFT-5G-402 coax using Times Microwave components. |
| 0 | ||
![]() Vyrian | 2882828 | Phoenix Contact | Surge Arrestors RoHS : Compliant | 6,675 | ||
| 282827-2 | TE Connectivity | Modular Terminal Block, 15A, 3mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 5,985 | |||
| KTM-TP9828/256 | Kingston Technology Company | 4,710 | ||||
| TPSM82822ASILR | Texas Instruments | Switching Regulator, Current/voltage-mode, 2A, 4000kHz Switching Freq-Max, Hybrid RoHS : Compliant | 4,480 | |||
| EPF8282ATC100-4 | Intel / Altera | Loadable PLD, CMOS, PQFP100 | 3,230 | |||
| EPF8282ATC100-2A | Intel / Altera | Loadable PLD, CMOS, PQFP100 | 3,097 | |||
| EPF8282AVTC100-3N | Intel / Altera | Loadable PLD, CMOS, PQFP100 | 2,649 | |||
EPF8282TM100-2![]() | Altera Corporation | Loadable PLD, CMOS, PQFP100 | 2,461 | |||
EPF8282ALI84-A-3![]() | Altera Corporation | Loadable PLD, 1.8ns, CMOS, PQCC84 | 2,439 | |||
| MAL211828221E3 | Vishay Intertechnologies | Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 63V, 20% +Tol, 20% -Tol, 220uF, Through Hole Mount RoHS : Compliant | 2,400 | |||
AT89LP828-20JU![]() | Microchip Technology Inc | Microcontroller, 8-Bit, FLASH, 8051 CPU, 20MHz, CMOS, PQCC32 RoHS : Compliant | 2,371 | |||
| EPF8282AVTC100-5 | Intel / Altera | Loadable PLD, CMOS, PQFP100 | 2,143 | |||
EPF8282ALI84-2![]() | Altera Corporation | Loadable PLD, CMOS, PQCC84 RoHS : Not Compliant | 2,118 | |||
| EPF8282AVLI84-5 | Intel / Altera | Loadable PLD, CMOS, PQCC84 | 1,208 | |||
| 1828281 | Phoenix Contact | Barrier Strip Terminal Block, 20A, 4mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 385 | |||
![]() Win Source Electronics | TPSM82823ASILR | Texas Instruments | DC DC CONVERTER 0.6-4V / Non-Isolated PoL Module DC DC Converter 1 Output 0.6 ~ 4V 3A 2.4V - 5.5V Input RoHS : Compliant |
| 55,980 | |
| TPSM82821ASILR | Texas Instruments | DC DC CONVERTER 0.6-4V / Non-Isolated PoL Module DC DC Converter 1 Output 0.6 ~ 4V 1A 2.4V - 5.5V Input RoHS : Compliant |
| 29,620 | ||
| TPSM828214SILR | Texas Instruments | 5.5-V INPUT, 1-A STEP-DOWN MODUL / Non-Isolated PoL Module DC DC Converter 1 Output 3.3V 1A 2.4V - 5.5V Input RoHS : Compliant |
| 20,802 | ||
| TPSM828222SILR | Texas Instruments | 5.5-V INPUT, 2-A STEP-DOWN MODUL / Non-Isolated PoL Module DC DC Converter 1 Output 1.8V 2A 2.4V - 5.5V Input RoHS : Compliant |
| 10,991 | ||
| TPSM82823SILR | Texas Instruments | 5.5-V INPUT, 3-A STEP-DOWN MODUL / Non-Isolated PoL Module DC DC Converter 1 Output 0.6 ~ 4V 3A 2.4V - 5.5V Input RoHS : Compliant |
| 10,820 | ||
TPSM82821SILR![]() | Texas Instruments | 5.5-V INPUT, 1-A STEP-DOWN MODUL / Non-Isolated PoL Module DC DC Converter 1 Output 0.6 ~ 4V 1A 2.4V - 5.5V Input RoHS : Compliant |
| 9,320 | ||
| TPSM828224SILR | Texas Instruments | 5.5-V INPUT, 2-A STEP-DOWN MODUL / Non-Isolated PoL Module DC DC Converter 1 Output 3.3V 2A 2.4V - 5.5V Input RoHS : Compliant |
| 9,242 | ||
| TPSM828211SILR | Texas Instruments | 5.5-V INPUT, 1-A STEP-DOWN MODUL / Non-Isolated PoL Module DC DC Converter 1 Output 1.2V 1A 2.4V - 5.5V Input RoHS : Compliant |
| 8,550 | ||
| TPSM828223SILR | Texas Instruments | 5.5-V INPUT, 2-A STEP-DOWN MODUL / Non-Isolated PoL Module DC DC Converter 1 Output 2.5V 2A 2.4V - 5.5V Input RoHS : Compliant |
| 8,460 | ||
| TPSM828221SILR | Texas Instruments | 5.5-V INPUT, 2-A STEP-DOWN MODUL / Non-Isolated PoL Module DC DC Converter 1 Output 1.2V 2A 2.4V - 5.5V Input RoHS : Compliant |
| 8,400 | ||
| TPSM828213SILR | Texas Instruments | 5.5-V INPUT, 1-A STEP-DOWN MODUL / Non-Isolated PoL Module DC DC Converter 1 Output 2.5V 1A 2.4V - 5.5V Input RoHS : Compliant |
| 8,280 | ||
TPSM82822SILR![]() | Texas Instruments | 5.5-V INPUT, 2-A STEP-DOWN MODUL / Non-Isolated PoL Module DC DC Converter 1 Output 0.6 ~ 4V 2A 2.4V - 5.5V Input RoHS : Compliant |
| 8,190 | ||
| TPSM828212SILR | Texas Instruments | 5.5-V INPUT, 1-A STEP-DOWN MODUL / Non-Isolated PoL Module DC DC Converter 1 Output 1.8V 1A 2.4V - 5.5V Input RoHS : Compliant |
| 5,440 | ||
| ADA8282WBCPZ | Analog Devices Inc | IC AFE 4 CHAN 16BIT 32LFCSP RoHS : Compliant |
| 3,175 | ||
| ADA8282WBCPZ-R7 | Analog Devices Inc | IC AFE 4 CHAN 16BIT 32LFCSP RoHS : Compliant |
| 2,880 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |