7702Z-O2 Price, Distributor, Stock

Key Specifications, Connector 1 Series: 2.4mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. 2.4mm Male to 2.4mm Male Cable 24 Inch Length Using PE-SR405FLJ Coax., Radio frequency assembly 2.4mm male to 2.4mm male cable 24 inch length using PE-SR405FLJ coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.4mm male to 2.4mm male cable 24 inch length using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.4mm to 2.4mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 2.4mm cable connection on one end and 2.4mm cable connection on the other. Our 2.4mm to 2.4mm cable assemblies have a male gender on end 1 and male on end 2. PE3C5770-24 can also be known as a 2.4mm plug to 2.4mm plug cable assembly and will be shipped same-day as it is purchased. 2.4mm plug to 2.4mm plug cable assembly PE3C5770-24 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable 2.4mm cable assembly is manufactured with 2.4mm to 2.4mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 50 GHz maximum frequency 2.4mm male to 2.4mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 2.4mm plug to 2.4mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 2.4mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.4mm male to 2.4mm male cable 24 inch length using PE-SR405FLJ coax.

1 : $347.99
25 : $330.59
50 : $313.19
100 : $299.27

PE3C9770-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: 20KV, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MHV, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel Over Copper, RF Cable Part Number: RG213HV, RF Cable Type: RG213HV, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. 20KV Female Bulkhead to MHV Male Cable 24 Inch Length Using RG213HV Coax., Radio frequency assembly 20KV female bulkhead to MHV male cable 24 inch length using RG213HV coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 20KV female bulkhead to MHV male cable 24 inch length using RG213HV coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 20KV to MHV cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 20KV bulkhead cable connection on one end and MHV cable connection on the other. Our 20KV to MHV cable assembly has female gender on end 1 and male on end 2. PE3C9770-24 can also be known as a 20KV jack to MHV plug cable assembly and will be shipped same-day as it is purchased. 20KV jack to MHV plug cable assembly PE3C9770-24 is built with RG213HV which is a coax type. The Pasternack 20KV cable assembly is manufactured with 20KV to MHV cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 20KV female bulkhead to MHV male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C9770-24 can also be used in the other direction and will be MHV male to 20KV female bulkhead cable assembly if the opposite connectivity is required. 20KV jack bulkhead to MHV plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 20KV to MHV cable assembly for quick shipment worldwide. Variations of 20KV cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 20KV female bulkhead to MHV male cable 24 inch length using RG213HV coax.

1 : $227.99
25 : $216.59
50 : $205.19
100 : $196.07

PE7702-20

Pasternack Enterprises

Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 18 GHz, Nominal Attenuation: 20 dB, VSWR, Max: 1.35:1, Input Power, Max (CW): 1 Watts, Body Material: Copper, Connector-In Series: 2.92mm, Connector-In Gender: Female, Connector-Out Series: 2.92mm, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -269.15 deg C. 20 dB Fixed Attenuator Bulkhead for Cryogenic Application, 2.92mm Female to 2.92mm Female Copper Gold Plated Body Rated to 1 W, DC to 18 GHz. PE7702-20 is a 20 dB fixed attenuator from Pasternack that is designed for cryogenic applications. This 20 dB attenuator is an in-line, resistive PI attenuator pad design. This RF attenuator comes with a maximum attenuation accuracy of 0.75 dB. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. The max input power rating (CW) of this RF attenuator is 1 Watt. This attenuator has a maximum VSWR of 1.35:1 and operates between 4 kelvin and 125 deg C. Our fixed radio frequency attenuator with 2.92mm connectors is constructed with copper body material and gold plating. The bidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 20 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This 2.92mm attenuator has a female gender on side 1 and a 2.92mm female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 20 dB. The Pasternack PE7702-20 attenuator is rated for up to 18 GHz. This fixed coaxial attenuator is suitable for quantum computing, precision measurements, instrumentation and prototyping and characterization applications. Our attenuator can work and maintain excellent RF performance at the low temperature of 4 kelvin. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7702-20 will ship the same business day as purchased from Pasternack’s production facility. This 20 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements.

1 : $505.0
10 : $494.9
25 : $484.8
100 : $474.7

PE7702-6

Pasternack Enterprises

Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 18 GHz, Nominal Attenuation: 6 dB, VSWR, Max: 1.35:1, Input Power, Max (CW): 1 Watts, Body Material: Copper, Connector-In Series: 2.92mm, Connector-In Gender: Female, Connector-Out Series: 2.92mm, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -269.15 deg C. 6 dB Fixed Attenuator Bulkhead for Cryogenic Application, 2.92mm Female to 2.92mm Female Copper Gold Plated Body Rated to 1 W, DC to 18 GHz. PE7702-6 is a 6 dB fixed attenuator from Pasternack that is designed for cryogenic applications. This 6 dB attenuator is an in-line, resistive PI attenuator pad design. This RF attenuator comes with a maximum attenuation accuracy of 0.75 dB. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. The max input power rating (CW) of this RF attenuator is 1 Watt. This attenuator has a maximum VSWR of 1.35:1 and operates between 4 kelvin and 125 deg C. Our fixed radio frequency attenuator with 2.92mm connectors is constructed with copper body material and gold plating. The bidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 6 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This 2.92mm attenuator has a female gender on side 1 and a 2.92mm female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 6 dB. The Pasternack PE7702-6 attenuator is rated for up to 18 GHz. This fixed coaxial attenuator is suitable for quantum computing, precision measurements, instrumentation and prototyping and characterization applications. Our attenuator can work and maintain excellent RF performance at the low temperature of 4 kelvin. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7702-6 will ship the same business day as purchased from Pasternack’s production facility. This 6 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements.

1 : $505.0
10 : $494.9
25 : $484.8
100 : $474.7

PE7702-10

Pasternack Enterprises

Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 18 GHz, Nominal Attenuation: 10 dB, VSWR, Max: 1.35:1, Input Power, Max (CW): 1 Watts, Body Material: Copper, Connector-In Series: 2.92mm, Connector-In Gender: Female, Connector-Out Series: 2.92mm, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -269.15 deg C. 10 dB Fixed Attenuator Bulkhead for Cryogenic Application, 2.92mm Female to 2.92mm Female Copper Gold Plated Body Rated to 1 W, DC to 18 GHz. PE7702-10 is a 10 dB fixed attenuator from Pasternack that is designed for cryogenic applications. This 10 dB attenuator is an in-line, resistive PI attenuator pad design. This RF attenuator comes with a maximum attenuation accuracy of 0.75 dB. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. The max input power rating (CW) of this RF attenuator is 1 Watt. This attenuator has a maximum VSWR of 1.35:1 and operates between 4 kelvin and 125 deg C. Our fixed radio frequency attenuator with 2.92mm connectors is constructed with copper body material and gold plating. The bidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 10 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This 2.92mm attenuator has a female gender on side 1 and a 2.92mm female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 10 dB. The Pasternack PE7702-10 attenuator is rated for up to 18 GHz. This fixed coaxial attenuator is suitable for quantum computing, precision measurements, instrumentation and prototyping and characterization applications. Our attenuator can work and maintain excellent RF performance at the low temperature of 4 kelvin. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7702-10 will ship the same business day as purchased from Pasternack’s production facility. This 10 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements.

1 : $505.0
10 : $494.9
25 : $484.8
100 : $474.7

PE7702-0

Pasternack Enterprises

Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 18 GHz, Nominal Attenuation: 0 dB, VSWR, Max: 1.35:1, Input Power, Max (CW): 1 Watts, Body Material: Copper, Connector-In Series: 2.92mm, Connector-In Gender: Female, Connector-Out Series: 2.92mm, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -269.15 deg C. 0 dB Fixed Attenuator Bulkhead for Cryogenic Application, 2.92mm Female to 2.92mm Female Copper Gold Plated Body Rated to 1 W, DC to 18 GHz. PE7702-0 is a 0 dB fixed attenuator from Pasternack that is designed for cryogenic applications. This attenuator is an in-line, resistive PI attenuator pad design. This RF attenuator comes with a maximum attenuation accuracy of 0.75 dB. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. The max input power rating (CW) of this RF attenuator is 1 Watt. This attenuator has a maximum VSWR of 1.35:1 and operates between 4 kelvin and 125 deg C. Our fixed radio frequency attenuator with 2.92mm connectors is constructed with copper body material and gold plating. The bidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This fixed attenuator has a gold-plated beryllium copper inner conductor. This 2.92mm attenuator has a female gender on side 1 and a 2.92mm female connector on side 2. The Pasternack PE7702-0 attenuator is rated for up to 18 GHz. This fixed coaxial attenuator is suitable for quantum computing, precision measurements, instrumentation and prototyping and characterization applications. Our attenuator can work and maintain excellent RF performance at the low temperature of 4 kelvin. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7702-0 will ship the same business day as purchased from Pasternack’s production facility. This attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements.

1 : $505.0
10 : $494.9
25 : $484.8
100 : $474.7

PE3C10770-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: 1.85mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 3.5mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. 1.85mm Male to 3.5mm Female Bulkhead Cable 24 Inch Length Using PE-SR405FLJ Coax., Pasternack’s PE3C10770-24 1.85mm male to 3.5mm female bulkhead RF cable assembly using PE-SR405FLJ coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.85mm male to 3.5mm female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 1.85mm to 3.5mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 1.85mm cable connection on one end and a 3.5mm bulkhead cable connection on the other. Our 1.85mm to 3.5mm cable assembly has a male gender on end 1 and a female on end 2. PE3C10770-24 can also be known as a 1.85mm plug to 3.5mm jack cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.787-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10770-24 RF cable has an FEP jacket of 0.105-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 105 degrees C. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 100 dB. Our 1.85mm male to bulkhead 3.5mm female cable has a maximum VSWR of 1.4:1. This PE3C10770-24 1.85mm plug to 3.5mm jack cable assembly is built with PE-SR405FLJ, which is a formable coax type. The Pasternack formable 1.85mm cable assembly is manufactured with 1.85mm to 3.5mm cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the solder attachment method and a beryllium copper body with gold over nickel plating, while the other has the clamp/solder attachment method and a stainless steel body with passivated plating. Additional dimensions, specifications, and CAD drawings for this 24-inch-long RF cable are available on our downloadable PDF datasheet. PE3C10770-24 can also be used in the other direction and will be a 3.5mm female bulkhead to 1.85mm male cable assembly if the opposite connectivity is required. This 1.85mm plug to 3.5mm jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to 3.5mm cable assembly for quick shipment worldwide. Variations of 1.85mm and 3.5mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.85mm to 3.5mm RF cable assembly as per your requirements.

1 : $334.8
10 : $321.41
25 : $308.02
100 : $294.62

PE7702-3

Pasternack Enterprises

Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 18 GHz, Nominal Attenuation: 3 dB, VSWR, Max: 1.35:1, Input Power, Max (CW): 1 Watts, Body Material: Copper, Connector-In Series: 2.92mm, Connector-In Gender: Female, Connector-Out Series: 2.92mm, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -269.15 deg C. 3 dB Fixed Attenuator Bulkhead for Cryogenic Application, 2.92mm Female to 2.92mm Female Copper Gold Plated Body Rated to 1 W, DC to 18 GHz. PE7702-3 is a 3 dB fixed attenuator from Pasternack that is designed for cryogenic applications. This 3 dB attenuator is an in-line, resistive PI attenuator pad design. This RF attenuator comes with a maximum attenuation accuracy of 0.75 dB. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. The max input power rating (CW) of this RF attenuator is 1 Watt. This attenuator has a maximum VSWR of 1.35:1 and operates between 4 kelvin and 125 deg C. Our fixed radio frequency attenuator with 2.92mm connectors is constructed with copper body material and gold plating. The bidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 3 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This 2.92mm attenuator has a female gender on side 1 and a 2.92mm female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 3 dB. The Pasternack PE7702-3 attenuator is rated for up to 18 GHz. This fixed coaxial attenuator is suitable for quantum computing, precision measurements, instrumentation and prototyping and characterization applications. Our attenuator can work and maintain excellent RF performance at the low temperature of 4 kelvin. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7702-3 will ship the same business day as purchased from Pasternack’s production facility. This 3 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements.

1 : $505.0
10 : $494.9
25 : $484.8
100 : $474.7

PE3C3770-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P141, RF Cable Type: PE-P141, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male to N Female Cable 24 Inch Length Using PE-P141 Coax., Radio frequency assembly SMA male to N female cable 24 inch length using PE-P141 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to N female cable 24 inch length using PE-P141 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and type N cable connection on the other. Our SMA to N type cable assemblies have a male gender on end 1 and female on end 2. PE3C3770-24 can also be known as a SMA plug to type N jack cable assembly and will be shipped same-day as it is purchased. SMA plug to type N jack cable assembly PE3C3770-24 is built with PE-P141 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SMA male to type N female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C3770-24 can also be used in the other direction and will be N type female to SMA male cable assembly if the opposite connectivity is required. SMA plug to type N jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to N type cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to N female cable 24 inch length using PE-P141 coax.

1 : $103.99
25 : $98.79
50 : $93.59
100 : $89.43

PE3C7702/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: 2.4mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P086, RF Cable Type: PE-P086, RF Cable Impedance: 50 Ohm.

PE3W17702

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm. N Male Right Angle to N Female Cable Using LMR-240-UF Coax. PE3W17702 is a N male right angle to N female cable using LMR-240-UF coax. This Pasternack N male right angle to N female cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. N right angle to N coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N right angle to female N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W17702 N male right angle to N female cable assembly is constructed with LMR-240-UF coax, * LMR™ is a trademark of Times Microwave Systems.

PE34770-24

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length: 24 inches. Reverse Polarity SMA Male to N Male Cable 24 Inch Length Using RG316 Coax., Radio frequency assembly reverse polarity SMA male to N male cable 24 inch length using RG316 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Reverse polarity SMA male to N male cable 24 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with reverse polarity SMA cable connection on one end and type N cable connection on the other. Our reverse polarity SMA to N type cable assemblies have a male gender on end 1 and male on end 2. This reverse polarity SMA to type N cable is a male to male coax assembly, PE34770-24, can also be known as a reverse polarity SMA plug to N type plug cable assembly and will be shipped same-day as it is purchased. Reverse polarity SMA plug to type N plug cable assembly PE34770-24 is built with RG316 which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this reverse polarity SMA male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34770-24 can also be used in the other direction and will be N type male to reverse polarity SMA male cable assembly if the opposite connectivity is required. SMA reverse polarity plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity SMA male to N male cable 24 inch length using RG316 coax.

1 : $79.99
25 : $75.99
50 : $71.99
100 : $68.79

PE3W07702

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm. TNC Male to Reverse Polarity TNC Female Cable Using LMR-400-UF Coax. PE3W07702 is a TNC male to reverse polarity TNC female cable using LMR-400-UF coax. This Pasternack TNC male to reverse polarity TNC female cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm TNC for connector 2. Our male TNC to reverse polarity female TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W07702 TNC male to TNC reverse polarity female cable assembly is constructed with LMR-400-UF coax, * LMR™ is a trademark of Times Microwave Systems.

PE3C7702

Pasternack Enterprises

Sager

7702

Keystone Electronics Corp

Terminals 45deg 15A PCB SCREW
RoHS : Compliant

500 : $1.08
1,000 : $0.8142
2,500 : $0.736

9857702010

Qnity Laird