| Electronic Components Datasheet Search |
|
6650-S08-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() ComSIT USA | CA4AD665*01FS1 | KRAUS & NAIMER | AVAILABLE EU | 138 | ||
![]() ComSIT USA | 665063 | TE Connectivity | Connector Accessory, 0.05in Min Cable Dia, 0.06in Max Cable Dia, Contact, Brass RoHS : Compliant | 10,000 | ||
| MK0201A66500W | Standex-Meder Electronics | REED SENSOR Photoelectric Sensor, 4.5mm Min, 10mm Max, Rectangular, Panel Mount RoHS : Not Compliant | 1,000 | |||
MAX6650EUB![]() | Maxim Integrated Products | FAN-SPEED REGULATOR AND MONITOR WITH SMBUS/I2C-COMPATIBLE INTERFACE Brushless DC Motor Controller, 0.1A, PDSO10 RoHS : Not Compliant | 766 | |||
| HCPL0466500E | Agilent Technologies Inc | INTELLIGENT POWER MODULE AND GATE DRIVE INTERFACE OPTOCOUPLER Logic IC Output Optocoupler, 1-Channel, 1-Element, 3750V Isolation RoHS : Compliant | 450 | |||
| LT6650HS5TRMPBF | Linear Technology | MICROPOWER RAIL-TO-RAIL BUFFER AMPLIFIER Three Terminal Voltage Reference, 1 Output, 0.4V, Trim/Adjustable, BIPolar, PDSO5 RoHS : Compliant | 315 | |||
| MSM6650G3BK | OKI Electric Industry Co Ltd | Small Signal Bipolar Transistor, 0.1A I(C), 50V V(BR)CEO, 2-Element, PNP, Silicon RoHS : Not Compliant | 112 | |||
| CJ2B22665033JD | carting | Circuit Breaker Hydraulic Magnetic 2Pole 50A 250VAC RoHS : Not Compliant | 2 | |||
![]() NexGen Digital | ERJ-2RKF6650X | Panasonic Electronic Components | 2,500 | |||
![]() PUI | 8949-H66/50BFA | Oupiin | RoHS : Compliant | 26 | ||
![]() Chip 1 Exchange | 536650-1 | TE Connectivity | INSTOCK | 23,625 | ||
| 66506-3 | INSTOCK | 10,100 | ||||
| 66504-4 | TE Connectivity | INSTOCK RoHS : Compliant | 10,000 | |||
| 68X6650 | Vishay Intertechnologies | INSTOCK | 1,000 | |||
| 38665/06 | INSTOCK | 991 | ||||
| 336650-001 | Amphenol FCi | INSTOCK | 483 | |||
| 66504-9 | TE Connectivity | INSTOCK RoHS : Compliant | 163 | |||
| 5545166504B | INSTOCK | 162 | ||||
| 6650383-1 | TE Connectivity | INSTOCK RoHS : Compliant | 136 | |||
| 336650-001 | INSTOCK | 132 | ||||
| 929665-01-04-I | 3M | INSTOCK | 120 | |||
| RNC55H6650FS | INSTOCK | 40 | ||||
| LC66508B | INSTOCK | 36 | ||||
| R114665000 | INSTOCK | 22 | ||||
| R114.665.000 | Radial Magnet Inc | INSTOCK | 7 | |||
![]() Pasternack Enterprises US | PE366-50CM | Pasternack Enterprises |
| 72 | ||
| PE7366-50 | Pasternack Enterprises | Key Specifications, Design: Fixed, Maximum Frequency: 6 GHz, Impedance: 50 Ohm, Power Maximum: 25 Watt, VSWR Maximum: 1.3:1, Attenuation: 50 dB, Connector Series 1: N, Connector Gender 1: Male, Connector Series 2: 7/16 DIN, Connector Gender 2: Female, Body Material: Black Anodized Aluminum Heatsink. 50 dB Fixed Attenuator, N Male to 7/16 DIN Female Black Anodized Aluminum Heatsink Body Rated to 25 Watts Up to 6 GHz. PE7366-50 is a fixed 50 dB attenuator from Pasternack. This 50dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This type N attenuator has a male gender on side 1 and a 7/16 DIN female connector on side 2. The Pasternack PE7366-50 50 dB attenuator is rated for up to 6 GHz. Our microwave attenuator is rated to 25 Watts at the stated attenuation value. Our fixed RF attenuator PE7366-50 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 50dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. |
| 2 | ||
| PE3W16650 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to BNC Female 4 Hole Flange Cable Using LMR-195 Coax. PE3W16650 is a SMA male right angle to BNC female 4 hole flange cable using LMR-195 coax. This Pasternack SMA male right angle to BNC female 4 hole flange cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm BNC for connector 2. SMA right angle to BNC coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to female BNC 4 hole flange cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W16650 SMA male right angle to BNC female 4 hole flange cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3C6650 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Mini SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm. 2.92mm Male to Mini SMP Female Cable Using PE-SR405AL Coax., Radio frequency assembly 2.92mm male to mini SMP female cable using PE-SR405AL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to mini SMP female cable using PE-SR405AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.92mm to mini SMP cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with 2.92mm cable connection on one end and mini SMP cable connection on the other. Our 2.92mm to mini SMP cable assembly has male gender on end 1 and female on end 2. PE3C6650 can also be known as a 2.92mm plug to mini SMP jack cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. 2.92mm plug to mini SMP jack cable assembly PE3C6650 is built with PE-SR405AL which is a semi-rigid coax type. The Pasternack semi-rigid 2.92mm cable assembly is manufactured with 2.92mm to mini SMP cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a solder attachment method and a beryllium copper body with gold over nickel plating. Additional dimensions, specifications and CAD drawings for this PE3C6650 RF cable are available on our downloadable PDF datasheet.PE3C6650 can also be used in the other direction and will be mini SMP female to 2.92mm male cable assembly if the opposite connectivity is required. 2.92mm plug to mini SMP jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to mini SMP cable assembly for quick shipment worldwide. Variations of 2.92mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm RF cable assembly as per your requirements. | 0 | |||
| PE6066-50 | Pasternack Enterprises | Key Specifications, Termination Type: RF Load, Connector Series: TNC, Connector Gender: Female, Minimum Frequency: DC, Maximum Frequency: 1 GHz, Impedance: 50 Ohm, Maximum Power: 0.5 Watt. 0.5 Watt RF Load with Chain Up to 1,000 MHz with TNC Female Nickel Plated Brass. PE6066-50 0.5 Watts RF load (also known as termination or dummy load) has a TNC connector that is female. This Pasternack 0.5 watt TNC female load / termination is rated for a maximum frequency of 1 GHz. Our TNC female termination load is a rf load termination with a 50 Ohm impedance. This TNC load / coax terminator is manufactured with chain. PE6066-50 0.5 watt TNC female load termination is one of over 40,000 RF, microwave and millimeter wave components in-stock at Pasternack. Our TNC female 0.5 watt termination load will ship worldwide the same day as purchased. |
| 0 | ||
| PE3C6650-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Mini SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. 2.92mm Male to Mini SMP Female Cable 24 Inch Length Using PE-SR405AL Coax., Radio frequency assembly 2.92mm male to mini SMP female cable 24 inch length using PE-SR405AL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to mini SMP female cable 24 inch length using PE-SR405AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.92mm to mini SMP cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with 2.92mm cable connection on one end and mini SMP cable connection on the other. Our 2.92mm to mini SMP cable assembly has male gender on end 1 and female on end 2. PE3C6650-24 can also be known as a 2.92mm plug to mini SMP jack cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. 2.92mm plug to mini SMP jack cable assembly PE3C6650-24 is built with PE-SR405AL which is a semi-rigid coax type. The Pasternack semi-rigid 2.92mm cable assembly is manufactured with 2.92mm to mini SMP cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a solder attachment method and a beryllium copper body with gold over nickel plating. Additional dimensions, specifications and CAD drawings for this PE3C6650-24 RF cable are available on our downloadable PDF datasheet.PE3C6650-24 can also be used in the other direction and will be mini SMP female to 2.92mm male cable assembly if the opposite connectivity is required. 2.92mm plug to mini SMP jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to mini SMP cable assembly for quick shipment worldwide. Variations of 2.92mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm RF cable assembly as per your requirements. |
| 0 | ||
| PE3W06650/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. SMA Male to SSMA Male Cable Using RG316 Coax with HeatShrink. PE3W06650/HS is a SMA male to SSMA male cable using RG316 coax. This Pasternack SMA male to SSMA male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SSMA for connector 2. Our male SMA to male SSMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W06650/HS SMA male to SSMA male cable assembly is constructed with RG316 coax. | 0 | |||
| PE3W06650 | Pasternack Enterprises | Key Specifications, Connector Series 1: SSMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. SSMA Male to SMA Male Cable Using RG316 Coax. PE3W06650 is a SSMA male to SMA male cable using RG316 coax. This Pasternack SSMA male to SMA male cable assembly uses a 50 Ohm SSMA for connector 1 and a 50 Ohm SMA for connector 2. Our male SSMA to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W06650 SSMA male to SMA male cable assembly is constructed with RG316 coax. | 0 | |||
| PE3C0666-50CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 2.92mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P086, RF Cable Type: PE-P086, RF Cable Impedance: 50 Ohm, Length: 19.69 inches. 2.92mm Male to 2.92mm Male Cable 50 cm Length Using PE-P086 Coax., Radio frequency assembly 2.92mm male to 2.92mm male cable 50 cm length using PE-P086 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 2.92mm male to 2.92mm male cable 50 cm length using PE-P086 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.92mm to 2.92mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 2.92mm cable connection on one end and 2.92mm cable connection on the other. Our 2.92mm to 2.92mm cable assemblies have a male gender on end 1 and male on end 2. This 2.92mm to 2.92mm cable is a male to male coax assembly, PE3C0666-50CM, can also be known as a 2.92mm plug to 2.92mm plug cable assembly and will be shipped same-day as it is purchased. 2.92mm plug to 2.92mm plug cable assembly PE3C0666-50CM is built with PE-P086 which is a flexible coax type. The Pasternack flexible 2.92mm cable assembly is manufactured with 2.92mm to 2.92mm cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 40 GHz maximum frequency 2.92mm male to 2.92mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 2.92mm plug to 2.92mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to 2.92mm cable assembly for quick shipment worldwide. Variations of 2.92mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.92mm male to 2.92mm male cable 50 cm length using PE-P086 coax. |
| 0 | ||
| PE3C5866-50CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.1/9.5 Mini DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: QMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 19.685 inches. Plenum 4.1/9.5 Mini DIN Male to QMA Male Low PIM Cable 50 cm Length Using SPP-250-LLPL Coax, LF Solder., Radio frequency assembly plenum 4.1/9.5 mini DIN male to QMA male low PIM cable 50 cm length using SPP-250-LLPL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum 4.1/9.5 mini DIN male to QMA male low PIM cable 50 cm length using SPP-250-LLPL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.1/9.5 mini DIN to QMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.1/9.5 mini DIN cable connection on one end and QMA cable connection on the other. Our low PIM 4.1/9.5 mini DIN to QMA cable assemblies have a male gender on end 1 and male on end 2. This 4.1/9.5 mini DIN to QMA cable is a male to male coax assembly, PE3C5866-50CM, can also be known as a low PIM 4.1/9.5 mini DIN plug to QMA plug cable assembly and will be shipped same-day as it is purchased. 4.1/9.5 mini DIN plug to QMA plug cable assembly PE3C5866-50CM is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 4.1/9.5 Mini DIN cable assembly is manufactured with 4.1/9.5 mini DIN to QMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM 4.1/9.5 mini DIN male to QMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5866-50CM can also be used in the other direction and will be QMA male to 4.1/9.5 mini DIN male cable assembly if the opposite connectivity is required. Low PIM 4.1/9.5 mini DIN plug to QMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.1/9.5 mini DIN to QMA cable assembly for quick shipment worldwide. Variations of 4.1/9.5 mini DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 4.1/9.5 mini DIN male to QMA male low PIM cable 50 cm length using SPP-250-LLPL coax, LF solder. |
| 0 | ||
| PE3C6650-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Mini SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 2.92mm Male to Mini SMP Female Cable 12 Inch Length Using PE-SR405AL Coax., Radio frequency assembly 2.92mm male to mini SMP female cable 12 inch length using PE-SR405AL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to mini SMP female cable 12 inch length using PE-SR405AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.92mm to mini SMP cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with 2.92mm cable connection on one end and mini SMP cable connection on the other. Our 2.92mm to mini SMP cable assembly has male gender on end 1 and female on end 2. PE3C6650-12 can also be known as a 2.92mm plug to mini SMP jack cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. 2.92mm plug to mini SMP jack cable assembly PE3C6650-12 is built with PE-SR405AL which is a semi-rigid coax type. The Pasternack semi-rigid 2.92mm cable assembly is manufactured with 2.92mm to mini SMP cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a solder attachment method and a beryllium copper body with gold over nickel plating. Additional dimensions, specifications and CAD drawings for this PE3C6650-12 RF cable are available on our downloadable PDF datasheet.PE3C6650-12 can also be used in the other direction and will be mini SMP female to 2.92mm male cable assembly if the opposite connectivity is required. 2.92mm plug to mini SMP jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to mini SMP cable assembly for quick shipment worldwide. Variations of 2.92mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm RF cable assembly as per your requirements. |
| 0 | ||
| PE3C6650-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Mini SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. 2.92mm Male to Mini SMP Female Cable 18 Inch Length Using PE-SR405AL Coax., Radio frequency assembly 2.92mm male to mini SMP female cable 18 inch length using PE-SR405AL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to mini SMP female cable 18 inch length using PE-SR405AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.92mm to mini SMP cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with 2.92mm cable connection on one end and mini SMP cable connection on the other. Our 2.92mm to mini SMP cable assembly has male gender on end 1 and female on end 2. PE3C6650-18 can also be known as a 2.92mm plug to mini SMP jack cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. 2.92mm plug to mini SMP jack cable assembly PE3C6650-18 is built with PE-SR405AL which is a semi-rigid coax type. The Pasternack semi-rigid 2.92mm cable assembly is manufactured with 2.92mm to mini SMP cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a solder attachment method and a beryllium copper body with gold over nickel plating. Additional dimensions, specifications and CAD drawings for this PE3C6650-18 RF cable are available on our downloadable PDF datasheet.PE3C6650-18 can also be used in the other direction and will be mini SMP female to 2.92mm male cable assembly if the opposite connectivity is required. 2.92mm plug to mini SMP jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to mini SMP cable assembly for quick shipment worldwide. Variations of 2.92mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm RF cable assembly as per your requirements. |
| 0 | ||
| PE3C6650-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Mini SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. 2.92mm Male to Mini SMP Female Cable 36 Inch Length Using PE-SR405AL Coax., Radio frequency assembly 2.92mm male to mini SMP female cable 36 inch length using PE-SR405AL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to mini SMP female cable 36 inch length using PE-SR405AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.92mm to mini SMP cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with 2.92mm cable connection on one end and mini SMP cable connection on the other. Our 2.92mm to mini SMP cable assembly has male gender on end 1 and female on end 2. PE3C6650-36 can also be known as a 2.92mm plug to mini SMP jack cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. 2.92mm plug to mini SMP jack cable assembly PE3C6650-36 is built with PE-SR405AL which is a semi-rigid coax type. The Pasternack semi-rigid 2.92mm cable assembly is manufactured with 2.92mm to mini SMP cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a solder attachment method and a beryllium copper body with gold over nickel plating. Additional dimensions, specifications and CAD drawings for this PE3C6650-36 RF cable are available on our downloadable PDF datasheet.PE3C6650-36 can also be used in the other direction and will be mini SMP female to 2.92mm male cable assembly if the opposite connectivity is required. 2.92mm plug to mini SMP jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to mini SMP cable assembly for quick shipment worldwide. Variations of 2.92mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm RF cable assembly as per your requirements. |
| 0 | ||
| PE3C6650-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Mini SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. 2.92mm Male to Mini SMP Female Cable 6 Inch Length Using PE-SR405AL Coax., Radio frequency assembly 2.92mm male to mini SMP female cable 6 inch length using PE-SR405AL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to mini SMP female cable 6 inch length using PE-SR405AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.92mm to mini SMP cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with 2.92mm cable connection on one end and mini SMP cable connection on the other. Our 2.92mm to mini SMP cable assembly has male gender on end 1 and female on end 2. PE3C6650-6 can also be known as a 2.92mm plug to mini SMP jack cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. 2.92mm plug to mini SMP jack cable assembly PE3C6650-6 is built with PE-SR405AL which is a semi-rigid coax type. The Pasternack semi-rigid 2.92mm cable assembly is manufactured with 2.92mm to mini SMP cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a solder attachment method and a beryllium copper body with gold over nickel plating. Additional dimensions, specifications and CAD drawings for this PE3C6650-6 RF cable are available on our downloadable PDF datasheet.PE3C6650-6 can also be used in the other direction and will be mini SMP female to 2.92mm male cable assembly if the opposite connectivity is required. 2.92mm plug to mini SMP jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to mini SMP cable assembly for quick shipment worldwide. Variations of 2.92mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm RF cable assembly as per your requirements. |
| 0 | ||
| PE3C7866-50CM | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm, Length: 19.68 inches. SMA Male to SMA Female Bulkhead Low PIM Cable 50 Cm Length Using 1/4 inch Superflexible Coax., Radio frequency assembly SMA male to SMA female bulkhead low PIM cable 50 cm length using 1/4 inch superflexible coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA female bulkhead low PIM cable 50 cm length using 1/4 inch superflexible coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with SMA cable connection on one end and SMA bulkhead cable connection on the other. Our low PIM SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMA cable is a male to female coax assembly, PE3C7866-50CM, can also be known as a low PIM SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE3C7866-50CM is built with 1/4" superflexible which is a corrugated coax type. The Pasternack low passive intermodulation corrugated SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM SMA male to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7866-50CM can also be used in the other direction and will be SMA female bulkhead to SMA male cable assembly if the opposite connectivity is required. Low PIM SMA plug to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA female bulkhead low PIM cable 50 cm length using 1/4 inch superflexible coax. |
| 0 | ||
![]() Venkel Ltd. | TFCR0402-16W-C-6650BT-1K | VENKEL LTD | Thin Film CR;0402;1/16W;�50PPM;665R;�0.1% RoHS : Compliant | 0 | ||
| TFCR0402-16W-C-6650CT | VENKEL LTD | Thin Film CR;0402;1/16W;�50PPM;665R;�0.25% RoHS : Compliant | 0 | |||
| CR0402-10W-6650FT | VENKEL LTD | Chip Resistor;0402;1/10W;665R;�1% RoHS : Compliant | 0 | |||
| CR0402-16W-6650DT | VENKEL LTD | Chip Resistor;0402;1/16W;665R;�0.5% RoHS : Compliant | 0 | |||
| TFCR0603-10W-E-6650FT | VENKEL LTD | Thin Film CR;0603;1/10W;�25PPM;665R;�1% RoHS : Compliant | 0 | |||
| TFCR1206-8W-E-6650FT-1K | VENKEL LTD | Thin Film CR;1206;1/8W;�25PPM;665R;�1% RoHS : Compliant | 0 | |||
| TFCR2010-4W-E-6650FT-1K | VENKEL LTD | Thin Film CR;2010;1/4W;�25PPM;665R;�1% RoHS : Compliant | 0 | |||
| TFCR2512-2W-K-6650BT | VENKEL LTD | Thin Film CR;2512;1/2W;�100PPM;665R;�0.1% RoHS : Compliant | 0 | |||
| TFCR2512-2W-K-6650CT-1K | VENKEL LTD | Thin Film CR;2512;1/2W;�100PPM;665R;�0.25% RoHS : Compliant | 0 | |||
| UPTF0805-10W-N-6650DT-1K | VENKEL LTD | Ultra Precision Thin Film CR;0805;1/10W;�10PPM;665R;�0.5% RoHS : Compliant | 0 | |||
| UPTF1206-8W-N-6650AT-1K | VENKEL LTD | Ultra Precision Thin Film CR;1206;1/8W;10PPM;665R;�0.05% RoHS : Compliant | 0 | |||
| UPTF1206-8W-P-6650UT-1K | VENKEL LTD | Ultra Precision Thin Film CR;1206;1/8W;5PPM;665R;�0.01% RoHS : Compliant | 0 | |||
| CRG0805-R-6650FT | VENKEL LTD | RoHS 10/10 Green CR;0805;1/8W;665R;�1% RoHS : Compliant | 0 | |||
| CR1206-4W-6650FT | VENKEL LTD | Chip Resistor;1206;1/4W;665R;�1% RoHS : Compliant | 0 | |||
| AGCR0805-YK-6650DT | VENKEL LTD | Auto Grade Resistor;0805;1/3W;�100PPM;665R;�0.5% RoHS : Compliant | 0 | |||
![]() Vyrian | TM3RA-66(50) | Hirose Electric | Telecom and Datacom Connector, 6 Contact(s), Female, Straight, Solder Terminal, Jack | 9,951 | ||
V62/04665-01YE![]() | Texas Instruments | Bus Driver, LVC/LCX/Z Series, 1-Func, 8-Bit, Inverted Output, CMOS, PDSO20 RoHS : Compliant | 9,768 | |||
V62/03665-01XE![]() | Texas Instruments | Differential Multiplexer, 1 Func, 2 Channel, CMOS, PDSO16 RoHS : Compliant | 8,964 | |||
| TPS76650PWR | Texas Instruments | Fixed Positive LDO Regulator, 5V, 0.25V Dropout, PDSO8 | 8,236 | |||
V62/06665-01XE![]() | Texas Instruments | Monostable Multivibrator, AHC/VHC/H/U/V Series, 2-Func, CMOS, PDSO16 RoHS : Compliant | 7,509 | |||
| TPS7A6650EVM | Texas Instruments | 5,616 | ||||
V62/04665-01XE![]() | Texas Instruments | Bus Driver, LVC/LCX/Z Series, 1-Func, 8-Bit, Inverted Output, CMOS, PDSO20 RoHS : Compliant | 4,949 | |||
| TLV76650QWDRBRDN | Texas Instruments | 4,297 | ||||
V62/06650-01XE![]() | Texas Instruments | D/A Converter, 1 Func, Parallel, Word Input Loading, 0.0104us Settling Time, PQFP100 RoHS : Compliant | 4,274 | |||
V62/03665-01YE![]() | Texas Instruments | Differential Multiplexer, 1 Func, 4 Channel, CMOS, PDSO16 RoHS : Compliant | 4,136 | |||
| SN76650N | Texas Instruments | Consumer IC, Bipolar, PDIP14 RoHS : Not Compliant | 3,721 | |||
TPS76650DRG4![]() | Texas Instruments | Fixed Positive LDO Regulator, 5V, 0.25V Dropout, PMOS, PDSO8 RoHS : Compliant | 3,379 | |||
TPS76650DG4![]() | Texas Instruments | Fixed Positive LDO Regulator, 5V, 0.25V Dropout, PMOS, PDSO8 RoHS : Compliant | 3,019 | |||
LT6650CS5![]() | Linear Technology | Three Terminal Voltage Reference, 1 Output, 0.4V, Trim/Adjustable, BIPolar, PDSO5 RoHS : Not Compliant | 769 | |||
| TM5RJ2-66(50) | Hirose Electric | Telecom and Datacom Connector | 237 | |||
![]() Waytek, Inc. | 1-2066502-3 | TE Connectivity | TE 2 Position Mini Fuse Holder Cover RoHS : Compliant |
| 1,568 | |
![]() Win Source Electronics | TPS7A6650QDGNRQ1![]() | Texas Instruments | LDO Regulator Pos 5V 0.15A Automotive 8-Pin HVSSOP EP T/R / IC REG LDO 5V 0.15A 8MSOP RoHS : Compliant |
| 266,666 | |
| 0466.500NRHF | Littelfuse Inc | FUSE BOARD MOUNT 500MA 63VAC/VDC RoHS : Compliant |
| 80,000 | ||
MAX6650EUB![]() | Maxim Integrated Products | IC REG LIN FAN SPEED REGULATOR RoHS : Not Compliant |
| 50,000 | ||
MAX6650EUB+![]() | Maxim Integrated Products | Fan-Speed Regulators and Monitors with SMBus/I2C-Compatible Interface / IC MOTOR CONTROLLER I2C 10UMAX RoHS : Compliant |
| 50,000 | ||
| HCPL-0466-500 | Broadcom Limited | Optocoupler |
| 26,331 | ||
| HCPL-0466-500E | Broadcom Limited | Optocoupler Logic-Out Pull Up DC-IN 1-CH 8-Pin SOIC T/R / OPTOISO 3.75KV OPN COLLECTOR 8SO RoHS : Compliant |
| 21,888 | ||
MAX6650EUB+T![]() | Maxim Integrated Products | Fan-Speed Regulators and Monitors with SMBus/I2C-Compatible Interface / IC MOTOR CONTROLLER I2C 10UMAX RoHS : Compliant |
| 15,000 | ||
MAX6650EUB-T![]() | Maxim Integrated Products | Fan-Speed Regulators and Monitors with SMBus/I2C-Compatible Interface RoHS : Not Compliant |
| 15,000 | ||
LT6650HS5![]() | Linear Technology | Micropower, 400mV Reference with Rail-to-Rail Buffer Amplifier in SOT-23 RoHS : Not Compliant |
| 8,665 | ||
| LT6650HS5#TRMPBF | Analog Devices Inc | Voltage References uP, 400mV Ref w/ R2R Buf Amp in SOT-23 RoHS : Compliant |
| 8,140 | ||
| LT6650HS5#TRPBF | Analog Devices Inc | IC VREF SERIES 1.5% TSOT23-5 RoHS : Compliant |
| 8,070 | ||
LT6650IS5#TRMPBF![]() | Linear Technology | IC VREF SERIES 0.4V TSOT23-5 / V-Ref Precision 0.4V 0.2mA Automotive 5-Pin TSOT-23 T/R RoHS : Compliant |
| 1,852 | ||
| LT6650IS5#TRPBF | Analog Devices Inc | IC VREF SERIES 1% TSOT23-5 RoHS : Compliant |
| 1,460 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |