| Distributor | Part # | Manufacturer | Description | Price | Qty.
BuyNow |
Neutron USA | 09552156622741
| HARTING Technology Group | D-Sub Standard Connectors 15 Position D-Sub Receptacle, Female Sockets Connector
RoHS : Compliant | | 50
 |
4896-227G
| MG Chemicals | Solder 20AWG .040IN DIA 1/2lb. SPOOL | | 50
|
622-1104-304F
| Dialight | LED Panel Mount Indicators 22mm FLT PMI RED 24VDC
RoHS : Compliant | | 50
|
THN 15-3622UIR
| Traco Power | Isolated DC/DC Converters - Through Hole 15W 9-75Vin +12Vout 625mA, -12Vout 625mA 1 x 1 Metal Case, Railway | | 44
|
16220-1
| Eaton Bussmann | Power Distribution Block, 175A, 600V, 1P, Panel Mount, Magnum 160 and 162 Series
RoHS : Unknown | | 41
|
R06-222-NNKA
| Norgren | Norgren R06-222-NNKA Regulator, 1/4" PTF, 12scfm, Non-Relieving Diaphragm, 5 to 100psi, R06 Series | | 33
|
46-2234.11G0.000
| EAO AG | Switch Actuators Actuator, oe 22.3 mm, oe 29 mm, flush, illuminative, Yellow, Plastic, transparent, round, Black, Plastic, Maintained, IP65, IK03 | | 27
|
09062216883
| HARTING Technology Group | DIN 41612 Connectors 21+5 FEMALE CONN
RoHS : Compliant | | 24
|
46-2231.4FK0.000
| EAO AG | Switch Actuators Actuator, oe 30.5 mm, oe 35 mm, flush, illuminative, White, Plastic, transparent, round, Silver, Aluminium, Momentary, IP65, IK04
RoHS : Compliant | | 18
|
1862200000
| Weidmüller Interface GmbH & Co. KG | Other Tools WK-1/4(SCREWTY) | | 5
|
1412622
 | Phoenix Contact | Heavy Duty Power Connectors HC-STA-B10-HLFD- 1TTP16-EL-AL
RoHS : Compliant | | 0
|
1622459
| Phoenix Contact | Controllers EV-CC-AC1-M3-CC-SER HS - CHRGING CNTRLR
RoHS : Compliant | | 0
|
1406224
| Phoenix Contact | Sensor/actuator cable, Str M12 M 4p to cut end, 4wire 10m, PVC, yel, SAC-4P-M12MS/10,0-542 BK
RoHS : Compliant | | 0
|
1622152
| Phoenix Contact | Fuse Plug Connector Black PV-C-M/F-PRO/ F-1500/30-EU | | 0
|
17262202102
| HARTING Technology Group | Hard Metric Connectors 220P FEMALE MONOBLOCK MODULE
RoHS : Compliant | | 0
|
Pasternack Enterprises US | PE3C6226-200CM
| Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 78.7402 inches. Plenum Snap-On 4.3-10 Male to N Female Bulkhead Low PIM Cable 200 cm Length Using SPP-250-LLPL Coax Using Times Microwave Parts., Radio frequency assembly plenum snap-on 4.3-10 male to N female bulkhead low PIM cable 200 cm length using SPP-250-LLPL coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum snap-on 4.3-10 male to N female bulkhead low PIM cable 200 cm length using SPP-250-LLPL coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-SPP250-4310MS-LP 4.3-10 to TC-SPP250-NF-BH-LP N type cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-SPP250-4310MS-LP 4.3-10 cable connection on one end and TC-SPP250-NF-BH-LP type N bulkhead cable connection on the other. Our low PIM TC-SPP250-4310MS-LP 4.3-10 to TC-SPP250-NF-BH-LP type N cable assemblies have a male gender on end 1 and female on end 2. This TC-SPP250-4310MS-LP 4.3-10 to TC-SPP250-NF-BH-LP N type cable is a male to female coax assembly, PE3C6226-200CM, can also be known as a low PIM TC-SPP250-4310MS-LP 4.3-10 plug to TC-SPP250-NF-BH-LP type N jack cable assembly and will be shipped same-day as it is purchased. TC-SPP250-4310MS-LP 4.3-10 plug to TC-SPP250-NF-BH-LP type N jack cable assembly PE3C6226-200CM is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-SPP250-4310MS-LP 4.3-10 cable assembly is manufactured with TC-SPP250-4310MS-LP 4.3-10 to TC-SPP250-NF-BH-LP N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-SPP250-4310MS-LP 4.3-10 male to TC-SPP250-NF-BH-LP type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6226-200CM can also be used in the other direction and will be TC-SPP250-NF-BH-LP type N female bulkhead to TC-SPP250-4310MS-LP 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM TC-SPP250-4310MS-LP 4.3-10 plug to TC-SPP250-NF-BH-LP type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-SPP250-4310MS-LP 4.3-10 to TC-SPP250-NF-BH-LP type N cable assembly for quick shipment worldwide. Variations of TC-SPP250-4310MS-LP 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum snap-on 4.3-10 male to N female bulkhead low PIM cable 200 cm length using SPP-250-LLPL coax using Times Microwave parts. | 1 : $163.99
25 : $155.79
50 : $147.59
100 : $141.03
|
| 52
|
PE3C6226-12
| Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 12 inches. Plenum Snap-On 4.3-10 Male to N Female Bulkhead Low PIM Cable 12 Inch Length Using SPP-250-LLPL Coax Using Times Microwave Parts., Radio frequency assembly plenum snap-on 4.3-10 male to N female bulkhead low PIM cable 12 inch length using SPP-250-LLPL coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum snap-on 4.3-10 male to N female bulkhead low PIM cable 12 inch length using SPP-250-LLPL coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-SPP250-4310MS-LP 4.3-10 to TC-SPP250-NF-BH-LP type N cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-SPP250-4310MS-LP 4.3-10 cable connection on one end and TC-SPP250-NF-BH-LP N type bulkhead cable connection on the other. Our low PIM TC-SPP250-4310MS-LP 4.3-10 to TC-SPP250-NF-BH-LP type N cable assemblies have a male gender on end 1 and female on end 2. This TC-SPP250-4310MS-LP 4.3-10 to TC-SPP250-NF-BH-LP N type cable is a male to female coax assembly, PE3C6226-12, can also be known as a low PIM TC-SPP250-4310MS-LP 4.3-10 plug to TC-SPP250-NF-BH-LP type N jack cable assembly and will be shipped same-day as it is purchased. TC-SPP250-4310MS-LP 4.3-10 plug to TC-SPP250-NF-BH-LP type N jack cable assembly PE3C6226-12 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-SPP250-4310MS-LP 4.3-10 cable assembly is manufactured with TC-SPP250-4310MS-LP 4.3-10 to TC-SPP250-NF-BH-LP N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-SPP250-4310MS-LP 4.3-10 male to TC-SPP250-NF-BH-LP type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6226-12 can also be used in the other direction and will be TC-SPP250-NF-BH-LP type N female bulkhead to TC-SPP250-4310MS-LP 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM TC-SPP250-4310MS-LP 4.3-10 plug to TC-SPP250-NF-BH-LP type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-SPP250-4310MS-LP 4.3-10 to TC-SPP250-NF-BH-LP type N cable assembly for quick shipment worldwide. Variations of TC-SPP250-4310MS-LP 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum snap-on 4.3-10 male to N female bulkhead low PIM cable 12 inch length using SPP-250-LLPL coax using Times Microwave parts. | 1 : $105.99
25 : $100.69
50 : $95.39
100 : $91.15
|
| 52
|
PE45622
| Pasternack Enterprises | Key Specifications, Polarity: Standard, Connector Series: 2.4mm, Connector Gender: Female, Body Style: Straight, Attachment Method: Field Replaceable, Mount Method: 2 Hole Flange, Minimum Frequency: DC, Maximum Frequency: 50 GHz, Interface Type 1: 0.009 inch Pin. 2.4mm Female Field Replaceable Connector 2 Hole Flange Mount 0.009 inch Pin, .355 inch Hole Spacing with Metal Contact Ring. PE45622 2.4mm female 2 hole flange connector has an interface type of 0.009 inch pin and a impedance. Pasternack 2.4mm female 2 hole flange connector uses shield/contact as an attachment method. Our female 2.4mm connector provides a minimum frequency of DC and a maximum frequency of 50 GHz. The Pasternack 2.4mm female 2 hole flange connector has a PEI dielectric type and a VSWR of 1.2. The Pasternack 2.4mm connector has a passivated stainless steel body. Our PE45622 2.4mm connector uses beryllium copper contact. This 2.4mm female 2 hole flange RF connector is REACH compliant. This Pasternack female 2.4mm 2 hole flange connector will ship the same day as purchased. Our 2 hole flange 2.4mm female connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. We also build custom 2.4mm connector cable assemblies that will ship the same day as well. | 1 : $25.19
25 : $23.93
50 : $22.67
100 : $21.66
|
| 5
|
PE3MSA00662-24
| Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB 3-Lug, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB 3-Lug, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: TWC-124-2, RF Cable Type: TWC-124-2, RF Cable Impedance: 124 Ohm, Length, Max: 24 inches. TRB 3-Lug Jack Bulkhead to TRB 3-Lug Jack Bulkhead 1553 Cable 24 Inch Length Using 124 Ohm TWC-124-2 Coax., Radio frequency assembly TRB 3-Lug jack bulkhead to TRB 3-Lug jack bulkhead 1553 cable 24 inch length using 124 Ohm TWC-124-2 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-STD-1553 coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TRB 3-Lug jack bulkhead to TRB 3-Lug jack bulkhead 1553 cable 24 inch length using 124 Ohm TWC-124-2 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB 3-Lug to TRB 3-Lug cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB 3-Lug bulkhead cable connection on one end and TRB 3-Lug bulkhead cable connection on the other. Our 1553 TRB 3-Lug to TRB 3-Lug cable assemblies have a jack gender on end 1 and jack on end 2. PE3MSA00662-24 can also be known as a MIL-STD-1553 1553 TRB 3-Lug female to TRB 3-Lug female cable assembly and will be shipped same-day as it is purchased. TRB 3-Lug female to TRB 3-Lug female cable assembly PE3MSA00662-24 is built with TWC-124-2 which is a flexible twinax type. The Pasternack flexible TRB 3-Lug cable assembly is manufactured with TRB 3-Lug to TRB 3-Lug cable connectors, has a 78 Ohm impedance. RF specs on this MIL-STD-1553 500 MHz maximum frequency TRB 3-Lug jack bulkhead to TRB 3-Lug jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 1553 TRB 3-Lug female bulkhead to TRB 3-Lug female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB 3-Lug to TRB 3-Lug cable assembly for quick shipment worldwide. Variations of TRB 3-Lug cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TRB 3-Lug jack bulkhead to TRB 3-Lug jack bulkhead 1553 cable 24 inch length using 124 Ohm TWC-124-2 coax. | 1 : $313.99
25 : $298.29
50 : $282.59
100 : $270.03
|
| 3
|
PE71S6229
| Pasternack Enterprises | Key Specifications, Connector Series: 2.92mm, Connector Gender: Female, Switch Design: Reflective, Minimum Frequency: 500 MHz, Maximum Frequency: 40 GHz, Impedance: 50 Ohm, Maximum Input Power: 0.1 Watts, Minimum Isolation: 45 dB. SP8T PIN Diode Switch Operating From 500 MHz to 40 GHz Up to 0.1 Watts (+20 dBm) and Field Replaceable 2.92mm. PE71S6229 PIN diode switch from Pasternack is a Reflective design. Our RF Reflective PIN diode switch uses 2.92mm connectors at 50 Ohm. This 2.92mm PIN diode Reflective switch has a minimum frequency of 500 MHz and a maximum frequency of 40 GHz. The Pasternack PIN diode Reflective RF switch is rated at a switching speed of 50 ns and a maximum input power of 0.1 Watts (+20 dBm ). Insertion loss maximum of this 2.92mm Reflective switch is dB with an isolation minimum of 45 dB. Reflective PIN diode radio frequency switch PE71S6229 is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. Our Reflective 2.92mm coaxial PIN diode switch can ship worldwide the same day that it is bought as with our other available RF parts. | 1 : $8,090.0
5 : $7,766.4
10 : $7,442.8
|
| 2
|
PE3MSA00562-24
| Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02001, RF Cable Type: 30-02001, RF Cable Impedance: 78 Ohm, Length, Max: 24 inches. Lead Free 78 Ohm 3-Slot TRB Solder/Clamp Plug to TRB Threaded Solder/Clamp Plug for PE-30-02001 Twinax (.242 O.D.) 24" Cable., Radio frequency assembly lead free 78 Ohm 3-Slot TRB solder/clamp plug to TRB threaded solder/clamp plug for PE-30-02001 twinax (.242 O.D.) 24" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Lead free 78 Ohm 3-Slot TRB solder/clamp plug to TRB threaded solder/clamp plug for PE-30-02001 twinax (.242 O.D.) 24" cable, TRB cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB cable connection on the other. Our 1553 TRB to TRB cable assemblies have a plug gender on end 1 and plug on end 2. PE3MSA00562-24 can also be known as a 1553 TRB male to TRB male cable assembly and will be shipped same-day as it is purchased. TRB male to TRB male cable assembly PE3MSA00562-24 is built with 30-02001 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 400 MHz maximum frequency TRB plug to TRB plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 1553 TRB male to TRB male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this lead free 78 Ohm 3-Slot TRB solder/clamp plug to TRB threaded solder/clamp plug for PE-30-02001 twinax (.242 O.D.) 24" cable. | 1 : $261.99
25 : $248.89
50 : $235.79
100 : $225.31
|
| 1
|
PE3C9622-36
| Pasternack Enterprises | Key Specifications, Connector 1 Series: BMA, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Straight Cut Lead, Connector 2 Gender: Hermaphroditic, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. Snap-On BMA Jack to Straight Cut Lead Low Loss Cable 36 Inch Length Using LMR-100 Coax., Radio frequency assembly snap-on BMA jack to straight cut lead low loss cable 36 inch length using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The snap-on BMA jack to straight cut lead low loss cable 36 inch length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BMA to straight cut lead cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a BMA cable connection on one end and a straight cut lead cable connection on the other. Our low loss BMA to straight cut lead cable assembly has a jack gender on end 1 and a sexless on end 2. PE3C9622-36 can also be known as a low loss BMA female to straight cut lead sexless cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C9622-36 RF cable has a PVC jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. BMA female to straight cut lead sexless cable assembly PE3C9622-36 is built with LMR-100A which is a flexible coax type. The Pasternack flexible BMA cable assembly is manufactured with BMA to straight cut lead cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C9622-36 can also be used in the other direction and will be a straight cut lead sexless to BMA jack cable assembly if the opposite connectivity is required. Low loss BMA female to straight cut lead sexless cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BMA to straight cut lead cable assembly for quick shipment worldwide. Variations of BMA and straight cut lead cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BMA to Straight Cut Lead low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 1 : $185.99
10 : $182.27
25 : $178.55
100 : $174.83
|
| 0
|
PE3W21622
| Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm. N Male Right Angle to N Female Bulkhead Cable Using LMR-240 Coax. PE3W21622 is a N male right angle to N female bulkhead cable using LMR-240 coax. This Pasternack N male right angle to N female bulkhead cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. N right angle to N coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N right angle to female N bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W21622 N male right angle to N female bulkhead cable assembly is constructed with LMR-240 coax, * LMR™ is a trademark of Times Microwave Systems. | | 0
|
PE3C8622
| Pasternack Enterprises | | | 0
|
PE3C9622-200CM
| Pasternack Enterprises | Key Specifications, Connector 1 Series: BMA, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Straight Cut Lead, Connector 2 Gender: Hermaphroditic, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. Snap-On BMA Jack to Straight Cut Lead Low Loss Cable 200 CM Length Using LMR-100 Coax., Radio frequency assembly snap-on BMA jack to straight cut lead low loss cable 200 cm length using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The snap-on BMA jack to straight cut lead low loss cable 200 cm length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BMA to straight cut lead cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a BMA cable connection on one end and a straight cut lead cable connection on the other. Our low loss BMA to straight cut lead cable assembly has a jack gender on end 1 and a sexless on end 2. PE3C9622-200CM can also be known as a low loss BMA female to straight cut lead sexless cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C9622-200CM RF cable has a PVC jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. BMA female to straight cut lead sexless cable assembly PE3C9622-200CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible BMA cable assembly is manufactured with BMA to straight cut lead cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C9622-200CM can also be used in the other direction and will be a straight cut lead sexless to BMA jack cable assembly if the opposite connectivity is required. Low loss BMA female to straight cut lead sexless cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BMA to straight cut lead cable assembly for quick shipment worldwide. Variations of BMA and straight cut lead cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BMA to Straight Cut Lead low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 1 : $189.99
10 : $186.19
25 : $182.39
100 : $178.59
|
| 0
|
PE3W02622
| Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm. BNC Male to BNC Female 4 Hole Flange Cable Using RG142 Coax. PE3W02622 is a BNC male to BNC female 4 hole flange cable using RG142 coax. This Pasternack BNC male to BNC female 4 hole flange cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm BNC for connector 2. Our male BNC to female BNC 4 hole flange cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W02622 BNC male to BNC female 4 hole flange cable assembly is constructed with RG142 coax. | | 0
|
PE1WAN062-20SF
| Pasternack Enterprises | Key Specifications, Waveguide Size: WR-62, Gain Min: 20, Beam Width, 3dB V: 17.3, Beam Width, 3dB H: 17.5, Frequency, Min: 12.4 GHz, Frequency, Max: 18 GHz. WR-62 Standard Gain Horn with 20 dBi gain, SMA Female connector, Integrated Cage-Style Mount. The PE1WAN062-20SF standard gain horn antenna (also known as a waveguide horn antenna) is part of our huge selection of waveguide antennas. Pasternack’s standard gain horn antenna is manufactured with a WR-62 input and a waveguide to coaxial transition adapter. Our WR-62 waveguide antenna features an SMA female connector. This antenna is suitable for applications such as antenna measurements, wireless communication, laboratory use, microwave radio systems, radome testing, automotive antenna test solutions, radar cross section and satellite antenna testing. Our WR-62 standard gain horn antenna with an SMA female input has a minimum frequency of 12.4 GHz and a maximum frequency of 18 GHz. Pasternack’s PE1WAN062-20SF waveguide horn antenna has a typical gain of 20 dBi. Our waveguide antenna has a typical vertical beam width of 17.3 degrees and a horizontal beam width of 17.5 degrees at 3 dB. This antenna has a length of 12.22 inches, a width of 7.76 inches, and a weight of 1.08 lbs. This WR-62 waveguide horn antenna with 20 dBi gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Additional dimensions and specifications for this antenna are available on our downloadable PDF datasheet. Our standard gain horn antenna with an SMA female interface can ship worldwide the same business day that it is purchased, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements. | 1 : $2,230.0
5 : $2,140.8
10 : $2,051.6
25 : $1,962.4
|
| 0
|
PE3C6227
| Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.3-10, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm. Plenum 4.3-10 Male Right Angle to 4.3-10 Female Low PIM Cable Using SPP-250-LLPL Coax Using Times Microwave Parts., Radio frequency assembly plenum 4.3-10 male right angle to 4.3-10 female low PIM cable using SPP-250-LLPL coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum 4.3-10 male right angle to 4.3-10 female low PIM cable using SPP-250-LLPL coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-250-4310M-RA-LP 4.3-10 to TC-SPP250-4310F-LP 4.3-10 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with right angle TC-250-4310M-RA-LP 4.3-10 cable connection on one end and TC-SPP250-4310F-LP 4.3-10 cable connection on the other. Our low PIM right angle TC-250-4310M-RA-LP 4.3-10 to TC-SPP250-4310F-LP 4.3-10 cable assemblies have a male gender on end 1 and female on end 2. This TC-250-4310M-RA-LP 4.3-10 to TC-SPP250-4310F-LP 4.3-10 cable is a male to female coax assembly, PE3C6227, can also be known as a low PIM right angle TC-250-4310M-RA-LP 4.3-10 plug to TC-SPP250-4310F-LP 4.3-10 jack cable assembly and will be shipped same-day as it is purchased. TC-250-4310M-RA-LP 4.3-10 plug to TC-SPP250-4310F-LP 4.3-10 jack cable assembly PE3C6227 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-250-4310M-RA-LP 4.3-10 cable assembly is manufactured with right angle TC-250-4310M-RA-LP 4.3-10 to TC-SPP250-4310F-LP 4.3-10 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-250-4310M-RA-LP 4.3-10 right angle male to TC-SPP250-4310F-LP 4.3-10 female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6227 can also be used in the other direction and will be TC-SPP250-4310F-LP 4.3-10 female to right angle TC-250-4310M-RA-LP 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM TC-250-4310M-RA-LP 4.3-10 right angle plug to TC-SPP250-4310F-LP 4.3-10 jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-250-4310M-RA-LP 4.3-10 to TC-SPP250-4310F-LP 4.3-10 cable assembly for quick shipment worldwide. Variations of TC-250-4310M-RA-LP 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 4.3-10 male right angle to 4.3-10 female low PIM cable using SPP-250-LLPL coax using Times Microwave parts. | | 0
|
PE3C9622-100CM
| Pasternack Enterprises | Key Specifications, Connector 1 Series: BMA, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Straight Cut Lead, Connector 2 Gender: Hermaphroditic, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. Snap-On BMA Jack to Straight Cut Lead Low Loss Cable 100 CM Length Using LMR-100 Coax., Radio frequency assembly snap-on BMA jack to straight cut lead low loss cable 100 cm length using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The snap-on BMA jack to straight cut lead low loss cable 100 cm length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BMA to straight cut lead cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a BMA cable connection on one end and a straight cut lead cable connection on the other. Our low loss BMA to straight cut lead cable assembly has a jack gender on end 1 and a sexless on end 2. PE3C9622-100CM can also be known as a low loss BMA female to straight cut lead sexless cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C9622-100CM RF cable has a PVC jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. BMA female to straight cut lead sexless cable assembly PE3C9622-100CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible BMA cable assembly is manufactured with BMA to straight cut lead cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C9622-100CM can also be used in the other direction and will be a straight cut lead sexless to BMA jack cable assembly if the opposite connectivity is required. Low loss BMA female to straight cut lead sexless cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BMA to straight cut lead cable assembly for quick shipment worldwide. Variations of BMA and straight cut lead cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BMA to Straight Cut Lead low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 1 : $185.99
10 : $182.27
25 : $178.55
100 : $174.83
|
| 0
|
PE3W16222/HS
| Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TCOM-240, RF Cable Type: TCOM-240, RF Cable Impedance: 50 Ohm. SMA Male to N Male Cable Using TCOM-240 Coax with HeatShrink. PE3W16222/HS is a SMA male to N male cable using TCOM-240 coax. This Pasternack SMA male to N male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm N for connector 2. Our male SMA to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W16222/HS SMA male to N male cable assembly is constructed with TCOM-240 coax. | | 0
|
Teledyne HiRel | 5962-87622012A
| Teledyne HiRel | DECODER/DEMULTIPLEXER, 3-TO-8-LINE
RoHS : Not Compliant | | 0
 |
5962-8762201EA
| Teledyne HiRel | DECODER/DEMULTIPLEXER, 3-TO-8-LINE
RoHS : Not Compliant | | 0
|
5962-8762201FA
| Teledyne HiRel | DECODER/DEMULTIPLEXER, 3-TO-8-LINE
RoHS : Not Compliant | | 0
|
Venkel Ltd. | SWCR2010-WK-622JT
| VENKEL LTD | Surge Withstanding CR;2010;3/4W;�100PPM;6.2K;�5%
RoHS : Compliant | | 0
|
PWCR0603-UK-5622FT
| VENKEL LTD | Pulse Withstanding CR;0603;1/3W;�100PPM;56.2K;�1%
RoHS : Compliant | | 0
|
PWCR1210-XK-5622DT
| VENKEL LTD | Pulse Withstanding CR;1210;1W;�100PPM;56.2K;�0.5%
RoHS : Compliant | | 0
|
PWCR2010-WK-1622DT
| VENKEL LTD | Pulse Withstanding CR;2010;3/4W;�100PPM;16.2K;�0.5%
RoHS : Compliant | | 0
|
TFCR0402-16W-C-5622FT
| VENKEL LTD | Thin Film CR;0402;1/16W;�50PPM;56.2K;�1%
RoHS : Compliant | | 0
|
TFCR0402-16W-E-5622BT
| VENKEL LTD | Thin Film CR;0402;1/16W;�25PPM;56.2K;�0.1%
RoHS : Compliant | | 0
|
TFCR0603-10W-E-5622FT-1K
| VENKEL LTD | Thin Film CR;0603;1/10W;�25PPM;56.2K;�1%
RoHS : Compliant | | 0
|
TFCR0603-16W-E-5622CT
| VENKEL LTD | Thin Film CR;0603;1/16W;�25PPM;56.2K;�0.25%
RoHS : Compliant | | 0
|
TFCR0603-16W-K-1622DT-1K
| VENKEL LTD | Thin Film CR;0603;1/16W;�100PPM;16.2K;�0.5%
RoHS : Compliant | | 0
|
TFCR0603-16W-K-5622BT-1K
| VENKEL LTD | Thin Film CR;0603;1/16W;�100PPM;56.2K;�0.1%
RoHS : Compliant | | 0
|
TFCR0805-10W-C-1622BT-1K
| VENKEL LTD | Thin Film CR;0805;1/10W;�50PPM;16.2K;�0.1%
RoHS : Compliant | | 0
|
TFCR1206-4W-C-1622CT-1K
| VENKEL LTD | Thin Film CR;1206;1/4W;�50PPM;16.2K;�0.25%
RoHS : Compliant | | 0
|
TFCR1206-8W-C-1622DT
| VENKEL LTD | Thin Film CR;1206;1/8W;�50PPM;16.2K;�0.5%
RoHS : Compliant | | 0
|
TFCR2010-4W-C-1622BT
| VENKEL LTD | Thin Film CR;2010;1/4W;�50PPM;16.2K;�0.1%
RoHS : Compliant | | 0
|
UPTF2512-2W-P-5622BT
| VENKEL LTD | Ultra Precision Thin Film CR;2512;1/2W;�5PPM;56.2K;�0.1%
RoHS : Compliant | | 0
|
Waytek, Inc. | AT62-209-16141
| Amphenol Sine Systems | AT/AHD-9 Female Nickel Socket Contact 14GA SIZE 16 Solid 0462-209-16141 | 10 : $0.6742
50 : $0.6487
100 : $0.6265
200 : $0.5947
500 : $0.5756
1,000 : $0.5533
|
| 173,717
|
AT60-16-0622
| Amphenol Sine Systems | AT Series Nickel-Plated, Male Stamped & Formed,Contact, Size 16,18-20GA (4K on Reel) | 4,000 : $0.1481
20,000 : $0.1417
|
| 28,000
|
AT62-210-1231
| Amphenol Sine Systems | ATP/AHD-6 Female Gold Socket Contact 14-12 GA Size 12 Solid 0462-210-1231 GOLD PLATED | 1 : $1.4894
10 : $1.4217
50 : $1.383
100 : $1.3443
200 : $1.2863
500 : $1.2573
|
| 3,615
|
AT60-16-0622
| Amphenol Sine Systems | Amphenol Sine Systems AT60-16-0622 A Series male pin terminal is a size 16, nickel-plated copper alloy contact for 20-18 gauge wire. Designed as a Deutsch DT Series drop-in replacement, it supports sealed AT connector assemblies. | 25 : $0.27
50 : $0.2444
100 : $0.2237
200 : $0.2128
500 : $0.2031
1,000 : $0.1933
|
| 2,615
|
12162280
| Aptiv PLC | Aptiv 12162280 Metri-Pack 150.2 Series sealed connector is a 3-way female connector rated to 14A max. It is suited for space-limited in-line connections and low-energy electronic circuits, with a pull-to-seat design for high-demand sealed applications.
RoHS : Compliant | 5 : $2.0934
50 : $1.7708
100 : $1.6763
200 : $1.574
500 : $1.511
|
| 2,368
|
AT62-203-08141
| Amphenol Sine Systems | Amphenol Sine Systems AT62-203-08141 ATHD female socket terminal is a size 8 connector socket for 10-8 Ga. wire. Built from copper alloy with nickel plating, it supports ATHD Series heavy-duty power connector assemblies. | 1 : $4.62
10 : $4.47
50 : $4.35
100 : $4.18
200 : $4.07
500 : $3.96
|
| 2,010
|
AT62-203-04141
| Amphenol Sine Systems | Amphenol Sine Systems AT62-203-04141 ATHD female socket terminal is a size 4 connector socket for 6 gauge wire. Built from copper alloy with nickel plating, it supports ATHD Series heavy-duty power connector assemblies. | 1 : $8.6
10 : $7.88
50 : $7.3
100 : $7.11
200 : $6.66
500 : $6.23
|
| 1,499
|
4606-2222B
| Egis Mobile Electric | Harness for 8+2 Fuse Block 14 AWG, 10 ft ea Marked Circuits #5-8 | 1 : $31.51
5 : $28.12
10 : $26.3
50 : $24.85
100 : $23.63
200 : $22.54
|
| 18
|
SP2778/6228 CT
| Sargent Quality Tools | Battery Terminal Diamond Crimp Tool 1 thru 8 AWG | | 8
|
7622
| Blue Sea Systems | Automatic Charging Relay ACR Manual Control 12V DC DC 500A SPDT SWtCH INCLD ON/OFF/O | | 6
|
4320-0622
| Pressmaster AB | Waytek Precision Stripping TOOL | | 0
|
SP2776/6226 CT
| Sargent Quality Tools | Battery Terminal Diamond Crimp Tool 4/0 AWG and 250kcmil (Formally SP2776 6226CT) | | 0
|
AT62-16-0622
| Amphenol Sine Systems | AT Series Female Contact #16 Stamped & Formed, 18-20AWG Nickel Reel (4,000/Reel) | 4,000 : $0.2263
20,000 : $0.2184
|
| 0
|
AT62-20-0122
| Amphenol Sine Systems | ATM Female Reel Socket Contact 22-16GA Size 20 S&F 4000/Reel 1062-20-0122 | 4,000 : $0.2099
20,000 : $0.1882
|
| 0
|
SP2777/6227 CT
| Sargent Quality Tools | Battery Terminal Diamond Crimp Tool 1/0 thru 3/0 (Formally SP2777/6227 CT) | | 0
|
Wuhan P&S | TSV622AIDT
 | STMicroelectronics | Dual Rail-to-rail i/o CMOS op-amps
RoHS : Compliant | 1 : $0.57
100 : $0.57
500 : $0.57
1,000 : $0.57
|
| 10,000
|
RCA1206221KFHEA
| Vishay Intertechnologies | Sulfur Resistant Thick Film Chip Resistors
RoHS : Compliant | 1 : $0.24
100 : $0.08
500 : $0.08
1,000 : $0.08
|
| 5,000
|
English ▼ 
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand