| Electronic Components Datasheet Search |
|
612HTTDR10 Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() DigiKey | 0612HPP | Fix Supply | SELF-TAPPING SCREW PAN PHIL 6-19 |
| 200,000 | |
| 0612HPF410 | Fix Supply | SLF TAPPING SCREW FLAT PHIL 6-19 |
| 140,000 | ||
| 0612HTFBZ | Fix Supply | Self-Tapping Screw - High-Low - |
| 120,000 | ||
CAT3612HV2-T2![]() | Rochester Electronics LLC | IC LED DRV RGLTR MULT-STP 12TDFN RoHS : Unknown |
| 10,676 | ||
| VLS201612HBX-1R0M-1 | TDK Corporation | FIXED IND 1UH 2.7A 72 MOHM SMD RoHS : Compliant |
| 3,880 | ||
| VLS201612HBX-1R0M-1 | TDK Corporation | FIXED IND 1UH 2.7A 72 MOHM SMD RoHS : Compliant |
| 3,880 | ||
| VLS201612HBX-1R5M-1 | TDK Corporation | FIXED IND 1.5UH 2.16A 109 MOHM RoHS : Compliant |
| 2,437 | ||
| VLS201612HBX-1R5M-1 | TDK Corporation | FIXED IND 1.5UH 2.16A 109 MOHM RoHS : Compliant |
| 2,437 | ||
| VLS201612HBX-1R5M-1 | TDK Corporation | FIXED IND 1.5UH 2.16A 109 MOHM RoHS : Compliant |
| 2,437 | ||
| AFB0612HHD | Delta Electronics Inc | FAN AXIAL 60X20MM 12VDC WIRE |
| 131 | ||
| 03450612H | Littelfuse Inc | FUSE HLDR CART 600V 20A PNL MNT RoHS : Compliant |
| 103 | ||
| BMT1612H14-52 | BeStar Electronics Industry Co Ltd | Resonant Frequency:2048Hz |
| 90 | ||
AFB0612HD![]() | Delta Electronics Inc | FAN AXIAL 60X20MM 12VDC WIRE |
| 86 | ||
| 9GA0612H702 | Sanyo-Denki Co Ltd | FAN AXIAL 60X15MM 12VDC WIRE |
| 83 | ||
| 612H | Hammond Manufacturing | TRANSFORMER PULSE 1.5MH .45DCR RoHS : Compliant | 0 | |||
![]() Avnet Americas | 380FG112NF1612H6 | Glenair Inc | - Bulk (Alt: 380FG112NF1612H6) RoHS : Not Compliant |
| 0 | |
| 390BS002NF1612H6A | Glenair Inc | - Bulk (Alt: 390BS002NF1612H6A) RoHS : Not Compliant |
| 0 | ||
| 380FS115M1612H6 | Glenair Inc | - Bulk (Alt: 380FS115M1612H6) RoHS : Not Compliant |
| 0 | ||
| 360AS002B1612H3 | Glenair Inc | - Bulk (Alt: 360AS002B1612H3) RoHS : Not Compliant |
| 0 | ||
| 390FB001N1612H | Glenair Inc | - Bulk (Alt: 390FB001N1612H) RoHS : Not Compliant |
| 0 | ||
| 380AB001B1612H | Glenair Inc | - Bulk (Alt: 380AB001B1612H) RoHS : Not Compliant |
| 0 | ||
| HW-16-12-H-D-325-SM | Samtec Inc | - Bulk (Alt: HW-16-12-H-D-325-SM) RoHS : Compliant | 0 | |||
| HW-26-12-H-D-475-SM | Samtec Inc | - Bulk (Alt: HW-26-12-H-D-475-SM) RoHS : Compliant | 0 | |||
| HW-26-12-H-S-575-SM | Samtec Inc | - Bulk (Alt: HW-26-12-H-S-575-SM) RoHS : Compliant | 0 | |||
| MFS2612HMBA0AD | NXP Semiconductors | EFS26 - Trays (Alt: MFS2612HMBA0AD) RoHS : Compliant |
| 0 | ||
| ESW-116-12-H-D | Samtec Inc | Board Stackers & Spacers, Socket Strip, 2.54 mm, 32 Contacts, Solder, 2 Rows, 2.54 mm, ESW Series - Rail/Tube (Alt: ESW-116-12-H-D) RoHS : Compliant |
| 0 | ||
| MFS2612HMDA0ADR2 | NXP Semiconductors | EFS26 - Tape and Reel (Alt: MFS2612HMDA0ADR2) RoHS : Compliant |
| 0 | ||
| VLS201612HBX-1R5M-1 | TDK Corporation | Power Inductor (SMD), 1.5 uH, ? 20%, 2.22 A, Shielded, 2.5 A, 2mm x 1.6mm x 1.2mm - Tape and Reel (Alt: VLS201612HBX-1R5M-1) RoHS : Compliant |
| 0 | ||
| AFB0612HD | Eltek | - Bulk (Alt: AFB0612HD) RoHS : Not Compliant |
| 0 | ||
| HW-06-12-H-S-575-SM | Samtec Inc | - Bulk (Alt: HW-06-12-H-S-575-SM) RoHS : Compliant | 0 | |||
![]() Newark | VLS201612HBX-R47M-1 | TDK Corporation | POWER IND, 470NH, SHIELDED, 4.35A; RoHS : Compliant |
| 2,160 | |
| VLS201612HBX-R47M-1 | TDK Corporation | POWER IND, 470NH, SHIELDED, 4.35A; RoHS : Compliant |
| 2,160 | ||
| VLS201612HBX-R24M-1 | TDK Corporation | POWER INDUCTOR, 240NH, SHIELDED, 6.5A; RoHS : Compliant |
| 1,800 | ||
| VLS201612HBX-R24M-1 | TDK Corporation | POWER INDUCTOR, 240NH, SHIELDED, 6.5A; RoHS : Compliant |
| 1,800 | ||
| 9S0612H4011 | Sanyo-Denki Cooling | FAN, SILENT, 60MM, 12V, HI SPEED; RoHS : Compliant |
| 186 | ||
| IW612HN/A1IK | NXP Semiconductors | WIFI 6 /BLE 5.4, 2.4/5GHZ, HVQFN-116; Supply Voltage Min:990mV; Supply Voltage Max:1.155V; IC Case / Package:HVQFN; No. of Pins:116Pins; Frequency Response RF Min:5.17GHz; Frequency Response RF Max:5.895GHz; Product Range:- RoHS Compliant: Yes RoHS : Compliant |
| 100 | ||
| RW612HN/A2IK | NXP Semiconductors | MCU, 32BIT, 260MHZ, HVQFN-116; Product Range:RW612 Family RW612x Series Microcontrollers; Device Core:ARM Cortex-M33F; Data Bus Width:32 bit; Operating Frequency Max:260MHz; Program Memory Size:-; No. of Pins:116Pins; ADC Channels:- RoHS Compliant: Yes RoHS : Compliant |
| 97 | ||
| 9GA0612H9001 | Sanyo-Denki Cooling | AXIAL FAN, 60MM, 12VDC, 17.6CFM, 37DBA; RoHS : Compliant |
| 47 | ||
| VLS201612HBX-3R3M-1 | TDK Corporation | INDUCTOR, 3.3UH, 20%, 1.57A, SHLD; RoHS : Compliant |
| 30 | ||
| VLS201612HBX-3R3M-1 | TDK Corporation | INDUCTOR, 3.3UH, 20%, 1.57A, SHLD; RoHS : Compliant |
| 30 | ||
| M612 HHA2SCS100- | TR Fastenings | HEX SET, S/S, A2, M6X12, PK100; RoHS : Compliant |
| 20 | ||
| 9A0612H402 | Sanyo-Denki Cooling | AXIAL FAN, 60MM, 12VDC, 18.7CFM, 28DBA; RoHS : Compliant |
| 16 | ||
| C3R603612HCR | Hammond Manufacturing | METAL ENCLOSURE, WALL MNT; RoHS : Compliant |
| 5 | ||
| C3R483612HCR | Hammond Manufacturing | METAL ENCLOSURE, WALL MNT; RoHS : Compliant |
| 1 | ||
| 612H | Hammond Manufacturing | PULSE TRANSFORMER, OPEN STYLE, 1:01; RoHS : Compliant |
| 0 | ||
![]() RS | 19193-0612 (H-380-38) | Woodhead Molex | VERSAKRIMP RING TONGUE TERMINAL FOR 1 0 AWG WIRE |
| 85 | |
| 2454174 (25533612) (HFI804301751NA-050RS) | RS Pro | 7/16-20 X 1 3/4 IN HEX HEAD CAP SCREW, GRADE 8, YELLOW ZINC PLATED, FINE |
| 3 | ||
| 2702106 (AXL F DI16/1 DO16/1 2H) | Phoenix Contact | PLC EXPANSION MODULE, 16 DIGITAL I/O, 24 VDC, AXIOLINE F SERIES |
| 2 | ||
| 612H | Hammond Manufacturing | TRANSFORMER PULSE 1.5MH .45DCR RoHS : Compliant |
| 0 | ||
| 47612-HBK | Leviton Manufacturing Co | WH PLASTIC HALF BRKT - 3 SGLE BAYS |
| 0 | ||
| BFB0612H-F00 | Delta Electronics Inc | BLOWER SQUARE-60MM L X 60MM H X25.4MM W 12VDC 3 LEADS SPEED SENSOR RoHS : Compliant |
| 0 | ||
| CA1-B2-14-810-612-H (CA1B214810612H | CA1-B2-14-810-612-H | CA1B214810612H) | Carling Technologies | CIRCUIT BREAKER, C-SERIES, HYDRAULIC-MAGNETIC |
| 0 | ||
| CA1-B0-14-810-612-H (CA1B014810612H | CA1-B0-14-810-612-H | CA1B014810612H) | Carling Technologies | CIRCUIT BREAKER, C-SERIES, HYDRAULIC-MAGNETIC |
| 0 | ||
| AC2-B0-46-612-H6B-D (AC2B046612H6BD | AC2-B0-46-612-H6B-D | AC2B046612H6BD) | Carling Technologies | CIRCUIT BREAKER, A-SERIES, HYDRAULIC-MAGNETIC |
| 0 | ||
| CA1-B0-12-810-612-H (CA1B012810612H | CA1-B0-12-810-612-H | CA1B012810612H) | Carling Technologies | CIRCUIT BREAKER, C-SERIES, HYDRAULIC-MAGNETIC |
| 0 | ||
| GA4-B0-44-616-12-HC (GA4B04461612HC | GA4-B0-44-616-12-HC | GA4B04461612HC) | Carling Technologies | CIRCUIT BREAKER, G-SERIES, HYDRAULIC-MAGNETIC |
| 0 | ||
| GA4-B1-24-616-12-HC (GA4B12461612HC | GA4-B1-24-616-12-HC | GA4B12461612HC) | Carling Technologies | CIRCUIT BREAKER, G-SERIES, HYDRAULIC-MAGNETIC |
| 0 | ||
| CA2-B0-14-810-612-H (CA2B014810612H | CA2-B0-14-810-612-H | CA2B014810612H) | Carling Technologies | CIRCUIT BREAKER, C-SERIES, HYDRAULIC-MAGNETIC |
| 0 | ||
| CA1-B0-14-650-612-H (CA1B014650612H | CA1-B0-14-650-612-H | CA1B014650612H) | Carling Technologies | CIRCUIT BREAKER, C-SERIES, HYDRAULIC-MAGNETIC |
| 0 | ||
| CA1-B0-14-450-612-H (CA1B014450612H | CA1-B0-14-450-612-H | CA1B014450612H) | Carling Technologies | CIRCUIT BREAKER, C-SERIES, HYDRAULIC-MAGNETIC |
| 0 | ||
![]() Rochester Electronics | CAT3612HV2-T2![]() | onsemi | LED Driver, 2-Segment RoHS : Compliant |
| 10,676 | |
CAT3612HV2-GT2![]() | onsemi | LED Driver, Charge Pump, 2-Channel RoHS : Compliant |
| 6,490 | ||
![]() Sager | HW-16-12-H-D-325-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | ||
| 9A0612H4D011 | Sanyo-Denki Co Ltd | DC Fans DC Axial Fan, 60x60x25mm, 12VDC, Ribless, Locked Rotor Sensor |
| 0 | ||
| TW-06-12-H-D-698-110 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| HW-26-12-H-D-475-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| HW-26-12-H-S-575-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| 9GA0612H702 | Sanyo-Denki Co Ltd | DC Fans DC Axial Fan, 60x60x15mm, 12VDC, Low Power |
| 0 | ||
| 9RA0612H4D0011 | Sanyo-Denki Co Ltd | DC Fans Axial Fan, 60x60x25mm, 12VDC, Low Noise, Energy Saving, Ribless, Lock Sensor |
| 0 | ||
| CA2-B0-14-810-612-H | Carling Technologies | Circuit Breakers CA2B014810612H RoHS : Compliant |
| 0 | ||
| LCD6-12H-L | Panduit Corp | Terminals | 0 | |||
| 109P0612H601 | Sanyo-Denki Co Ltd | DC Fans DC Axial Fan, 60x60x20mm, 12VDC, Tachometer RoHS : Compliant |
| 0 | ||
| 109P0612H6D01 | Sanyo-Denki Co Ltd | DC Fans DC Axial Fan, 60x60x20mm, 12VDC, Locked Rotor Sensor |
| 0 | ||
| V1D2GTTC-PZC61-2HY-XTX1 | Carling Technologies | Rocker Switches | 0 | |||
| 109R0612H4D011 | Sanyo-Denki Co Ltd | DC Fans Axial Fan, 60x60x25mm, 12VDC, 20.5CFM, 28dBA, Ribless, Wire, Lock Rotor Sensor |
| 0 | ||
| ESW-116-12-H-D | Samtec Inc | PC / 104 Connectors .100 Elevated Socket Strip RoHS : Compliant |
| 0 | ||
| 109L0612H4D01 | Sanyo-Denki Co Ltd | DC Fans DC Axial Fan, 60x60x25mm, 12VDC, Long Life, Ribless, Locked Rotor Sensor |
| 0 | ||
![]() TME | SBL 66-12HR V0 | SSB | Re-battery: acid-lead; 12V; 55Ah; AGM; maintenance-free |
| 25 | |
| VLS201612HBX-100M-1 | TDK Corporation | Inductor: wire; SMD; 10uH; 0.89A; R: 756mΩ; ±20%; VLS; 2x1.6x1mm RoHS : Compliant |
| 0 | ||
| VLS201612HBX-4R7M-1 | TDK Corporation | Inductor: wire; SMD; 4.7uH; 1.37A; R: 312mΩ; ±20%; VLS; 2x1.6x1mm RoHS : Compliant |
| 0 | ||
| 109P0612H602 | Sanyo-Denki Co Ltd | Fan: DC; 60x60x20mm; axial; 12VDC; 25.2m3/h; 31dBA; ball; 4200rpm RoHS : Compliant |
| 0 | ||
| 0612HD/SB | Ersa GmbH | Tip; special; 2.5mm |
| 0 | ||
| HF32FV-16/12-HLTF(045)(590) | Xiamen Hongfa Electroacoustic Co.,Ltd. | Relay: electromagnetic; Ucoil: 12VDC; SPST-NO; 16A; 16A/250VAC |
| 0 | ||
| HF32FV-16/12-HLTF(045)(590) | Xiamen Hongfa Electroacoustic Co.,Ltd. | Relay: electromagnetic; Ucoil: 12VDC; SPST-NO; 16A; 16A/250VAC |
| 0 | ||
| 109R0612H401 | Sanyo-Denki Co Ltd | Fan: DC; 60x60x25mm; axial; 12VDC; 31.8m3/h; 28dBA; ball; 3800rpm RoHS : Compliant |
| 0 | ||
| D4N-612H | OMRON Corporation | Limit switch; adjustable lever, roller; 10A; max.240VAC; IP67 RoHS : Compliant |
| 0 | ||
| HF32FV-16/12-HLTF(335)(590) | Xiamen Hongfa Electroacoustic Co.,Ltd. | Relay: electromagnetic; Ucoil: 12VDC; SPST-NO; 16A; 16A/250VAC |
| 0 | ||
| RJUM-06-12-HK | igus Inc | Pillow block; aluminium,iglidur® J; 12mm; DryLin® R; with lever |
| 0 | ||
| HF32FV-16/12-HLTF(335) | Xiamen Hongfa Electroacoustic Co.,Ltd. | Relay: electromagnetic; Ucoil: 12VDC; SPST-NO; 16A; 16A/250VAC |
| 0 | ||
| HF163F-L16/12-HLT-L1 | Xiamen Hongfa Electroacoustic Co.,Ltd. | Relay: electromagnetic; Ucoil: 12VDC; SPST-NO; Icontacts max: 20A |
| 0 | ||
| HF32FV-16/12-HLTF | Xiamen Hongfa Electroacoustic Co.,Ltd. | Relay: electromagnetic; Ucoil: 12VDC; SPST-NO; 16A; 16A/250VAC |
| 0 | ||
| HFV16/12-H1TY-R | Xiamen Hongfa Electroacoustic Co.,Ltd. | Relay: electromagnetic; Ucoil: 12VDC; SPST-NO; automotive; HFV16 RoHS : Compliant |
| 0 | ||
![]() ComSIT USA | AD0612HXD71GL | ADDA USA Corporation | Fan RoHS : Not Compliant | 74 | ||
![]() PEI Genesis | S4295F0616-12H-2G-003 | SOURIAU-SUNBANK |
| 0 | ||
| S4295FM6516-12H-2G-003 | SOURIAU-SUNBANK |
| 0 | |||
| 10-729876-12H | Amphenol Corporation |
| 0 | |||
![]() PUI | 109P0612H702 | Sanyo-Denki Co Ltd | RoHS : Compliant | 2,000 | ||
![]() Richardson RFPD | LTC3612HFE#PBF | Analog Devices Inc | Conv DC-DC 2.25V to 5.5V Synchronous Step Down Sin RoHS : Compliant |
| 0 | |
| LTC3612HUDC#TRPBF | Analog Devices Inc | Conv DC-DC 2.25V to 5.5V Synchronous Step Down Sin RoHS : Compliant |
| 0 | ||
| LTC3612HFE#TRPBF | Analog Devices Inc | Conv DC-DC 2.25V to 5.5V Synchronous Step Down Sin RoHS : Compliant |
| 0 | ||
| WMSAW612H-X | Wall Industries Inc | ACTODC CONVERTR MOD | 0 | |||
| LTC3612HUDC#PBF | Analog Devices Inc | Conv DC-DC 2.25V to 5.5V Synchronous Step Down Sin RoHS : Compliant |
| 0 | ||
![]() Chip 1 Exchange | AFB0612HH-T9LY | Delta Electronics Inc | INSTOCK | 381 | ||
| AUB0612HH | INSTOCK | 10 | ||||
![]() Avnet Abacus | VLS201612HBX-4R7M-1 | TDK Corporation | Power Inductor SMD 47 H 129 A Shielded 137 A VLSHBX1 Series (Alt: VLS201612HBX-4R7M-1) RoHS : Compliant | 6,000 | ||
| KXG1612-H | Kingstate Electronics Corporation | KISKXG1612H (Alt: KXG1612-H) RoHS : Compliant | 5,000 | |||
| G14B80221612HR | Amphenol Corporation | Oculink Connector Receptacle 80 Position Straight Surface Mount TR - Tape and Reel (Alt: G14B80221612HR) RoHS : Compliant | 0 | |||
| G14A42211612HR | Amphenol Corporation | - Tape and Reel (Alt: G14A42211612HR) RoHS : Compliant | 0 | |||
| G14A42221612HR | Amphenol Corporation | - Tape and Reel (Alt: G14A42221612HR) RoHS : Compliant | 0 | |||
| 4612H-101-511LF | Bourns Inc | (Alt: 4612H-101-511LF) RoHS : Compliant | 0 | |||
| 4612H-101-103LF | Bourns Inc | (Alt: 4612H-101-103LF) RoHS : Compliant | 0 | |||
| VLS201612HBX-1R5M-1 | TDK Corporation | Power Inductor SMD 15 uH 20 222 A Shielded 25 A 2mm x 16mm x 12mm (Alt: VLS201612HBX-1R5M-1) RoHS : Compliant | 0 | |||
| VLS201612HBX-1R0M-1 | TDK Corporation | Power Inductor SMD 1 uH 20 285 A Shielded 31 A 2mm x 16mm x 12mm (Alt: VLS201612HBX-1R0M-1) RoHS : Compliant | 0 | |||
| VLS201612HBX-R47M-1 | TDK Corporation | Power Inductor SMD 470 nH 20 376 A Shielded 435 A 2mm x 16mm x 12mm (Alt: VLS201612HBX-R47M-1) RoHS : Compliant | 0 | |||
| VLS201612HBX-2R2M-1 | TDK Corporation | Power Inductor SMD 22 uH 20 197 A Shielded 21 A 2mm x 16mm x 12mm (Alt: VLS201612HBX-2R2M-1) RoHS : Compliant | 0 | |||
| VLS201612HBX-6R8M-1 | TDK Corporation | Power Inductor SMD 68 uH 20 102 A Shielded 107 A 2mm x 16mm x 12mm (Alt: VLS201612HBX-6R8M-1) RoHS : Compliant | 0 | |||
| VLS201612HBX-R24M-1 | TDK Corporation | Power Inductor SMD 240 nH 20 5 A Shielded 65 A 2mm x 16mm x 12mm (Alt: VLS201612HBX-R24M-1) RoHS : Compliant | 0 | |||
| VLS201612HBX-R33M-1 | TDK Corporation | Ind Power Chip Shielded Wirewound 033uH 20 1MHz Metal 387A TR (Alt: VLS201612HBX-R33M-1) RoHS : Compliant | 0 | |||
| VLS201612HBX-3R3M-1 | TDK Corporation | Power Inductor SMD 33 uH 20 157 A Shielded 16 A 2mm x 16mm x 12mm (Alt: VLS201612HBX-3R3M-1) RoHS : Compliant | 0 | |||
![]() Avnet Asia | G14A42221612HR | Amphenol Corporation | (Alt: G14A42221612HR) RoHS : Compliant | 0 | ||
| G14B80121612HR | Amphenol Corporation | (Alt: G14B80121612HR) RoHS : Compliant | 0 | |||
| AXG4B0612HP1 | Panasonic Electronic Components | (Alt: AXG4B0612HP1) RoHS : Compliant | 0 | |||
![]() Avnet Silica | RW612HN/A2IK | NXP Semiconductors | (Alt: RW612HN/A2IK) RoHS : Compliant | 0 | ||
| IW612HN/A1CK | NXP Semiconductors | (Alt: IW612HN/A1CK) RoHS : Compliant | 0 | |||
| IW612HN/A1IMP | NXP Semiconductors | (Alt: IW612HN/A1IMP) RoHS : Compliant | 0 | |||
| RW612HN/A2IMP | NXP Semiconductors | (Alt: RW612HN/A2IMP) RoHS : Compliant | 0 | |||
| MFS2612HMBA0AD | NXP Semiconductors | EFS26 (Alt: MFS2612HMBA0AD) RoHS : Compliant | 0 | |||
![]() EBV Elektronik | IW612HN/A1IMP | NXP Semiconductors | (Alt: IW612HN/A1IMP) RoHS : Compliant | 24,000 | ||
| IW612HN/A1IK | NXP Semiconductors | (Alt: IW612HN/A1IK) RoHS : Compliant | 0 | |||
| IW612HN/A1CMP | NXP Semiconductors | (Alt: IW612HN/A1CMP) RoHS : Compliant | 0 | |||
![]() Flip Electronics | IW612HN/A1CK | NXP Semiconductors | Stock | 2,000 | ||
![]() Maritex | VLS201612HBX-R24M-1 | TDK Corporation | SMD Inductors; VLS201612HBX-R24M-1; TDK; 240 nH; 1 MHz; 29 m?; 1.6 mm RoHS : Compliant |
| 13,827 | |
![]() Master Electronics | AFB0612HHD | Delta Thermal Inc | Axial Square-60mm L x 60mm H x 20 mm W 12VDC 2 Wire Leads RoHS : Compliant |
| 163 | |
| TSW-126-12-H-D | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HW-16-12-H-D-325-SM | Samtec Inc | Conn Board Stacker HDR 32 POS 2.54mm Solder ST SMD Tube RoHS : Compliant |
| 0 | ||
| TW-06-12-H-D-698-110 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HTSW-106-12-H-D | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HTSW-116-12-H-Q | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HW-26-12-H-D-475-SM | Samtec Inc | Conn Board Stacker HDR 52 POS 2.54mm Solder ST SMD RoHS : Compliant |
| 0 | ||
| HW-26-12-H-S-575-SM | Samtec Inc | RoHS : Compliant |
| 0 | ||
| BFB0612H-F00 | Delta Thermal Inc | Blower Square-60mm L x 60mm H x25.4mm W 12VDC 3 Wire Leads Speed Sensor (Tach) RoHS : Compliant |
| 0 | ||
| TW-16-12-H-D-305-090 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| CA2-B0-14-810-612-H | Carling Technologies | CA2B014810612H RoHS : Compliant |
| 0 | ||
| ESW-116-12-H-D | Samtec Inc | .100 Elevated Socket Strip RoHS : Compliant |
| 0 | ||
| ESQ-126-12-H-D | Samtec Inc | RoHS : Compliant |
| 0 | ||
| AFB0612HH-AR00 | Delta Thermal Inc | Axial Square-60mm L x 60mm H x 25mm W 12VDC 3 Wire Leads Locked Rotor Sensor RoHS : Compliant |
| 0 | ||
| AFB0612HD | Delta Thermal Inc | Axial Square-60mm L x 60mm H x 20 mm W 12VDC 2 Wire Leads RoHS : Compliant |
| 0 | ||
![]() Neutron USA | AFB0612HD![]() | Delta Electronics Inc | DC Fans 60x60x20mm 12V DC 1.32W, 16.6CFM 28dB, 2 wire |
| 50 | |
| AFB0612HHD | Delta Electronics Inc | DC Fans 60x60x20mm 12V DC Fan |
| 50 | ||
| 03450612H | Littelfuse Inc | Fuse Holder Shock Safe RoHS : Compliant |
| 50 | ||
| BUB0612HJ-00 | Delta Electronics Inc | DC Fans Blower, 60x60x23mm, 12VDC, 11.38CFM, 5.28W, 43dBA, 6000RPM, Sleeve, Tach, 3wire |
| 50 | ||
| EFB0612HHA | Delta Electronics Inc | DC Fan 60x60x10mm 12V 0.18A 2.16W, 21.19CFM 4800RPM 36.5dBA BB, 2 Wire Leads, Plastic Frame/Blade RoHS : Compliant |
| 50 | ||
| OD4006-12HSS | Orion Fans | DC Fans DC Fan, 40x6mm, 12VDC, 6CFM, 0.06A, 30dBA, 6600RPM, Sealed Sleeve, Lead Wire |
| 50 | ||
| 9WP0612H4011 | Sanyo-Denki Co Ltd | DC Fans Fan 60x25mm 12VDC Long Life NoRib Tach |
| 50 | ||
| KFB0612HAFDB | Delta Electronics Inc | Blowers DC Blower Frameless Fan, 60x12mm Round, Tachometer, PWM RoHS : Compliant |
| 50 | ||
| AFB0612HH-AF00 | Delta Electronics Inc | DC Fans 60x60x25mm 12V DC 2.04W, 27.6CFM 40dB, Tach |
| 50 | ||
| AFB0612HH-A | Delta Electronics Inc | DC Fan Axial Ball Bearing 12V 4V to 13.8V 27.55CFM 40dB 60 X 60 X 25.4mm |
| 21 | ||
| AFB0612HHE-T500 | Delta Electronics Inc | DC Fans 60x60x38mm 12V DC fan with IP55 Dust Resistant and protected against water jets RoHS : Compliant |
| 19 | ||
| 9A0612H4D011 | Sanyo-Denki Co Ltd | DC Fan Sq60x25mm 12VDC 1.32W, 3800rpm 18.7CFM 28dB, NoRib LockRtrSensor, 3 wire, Plastic F/B |
| 0 | ||
| AFB0612HHB-R00 | Delta Electronics Inc | DC Fans 60x60x15mm 12V DC 1.44W, 17.3CFM 35dB, Locked Rotor Sensor |
| 0 | ||
| 9A0612H4011 | Sanyo-Denki Co Ltd | DC Fan 60x25mm 12VDC 1.32W, 18.7CFM Ribless Tach, Plastic F/B |
| 0 | ||
| AFB0612H-AF00 | Delta Electronics Inc | DC Fans 60x60x25mm 12V DC Fan w/ Speed Sensor (Tach) |
| 0 | ||
![]() Pasternack Enterprises US | PE3C8612/HS | Pasternack Enterprises | 0 | |||
| PE3W16612/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMB, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. TNC Female Bulkhead to SMB Plug Low Loss Cable 24 Inch Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly TNC female bulkhead to SMB plug low loss cable 24 inch length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC female bulkhead to SMB plug low loss cable 24 inch length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to SMB cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a TNC bulkhead cable connection on one end and a SMB cable connection on the other. Our low loss TNC to SMB cable assembly has a female gender on end 1 and a plug on end 2. PE3W16612/HS-24 can also be known as a low loss TNC jack to SMB male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W16612/HS-24 RF cable has a PVC jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. TNC jack to SMB male cable assembly PE3W16612/HS-24 is built with LMR-100A which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to SMB cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the clamp/solder attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W16612/HS-24 can also be used in the other direction and will be a SMB plug to TNC female bulkhead cable assembly if the opposite connectivity is required. Low loss TNC jack bulkhead to SMB male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to SMB cable assembly for quick shipment worldwide. Variations of TNC and SMB cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to SMB low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W01612/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: MCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. MCX Plug to BNC Male Cable Using RG316 Coax with HeatShrink. PE3W01612/HS is a MCX plug to BNC male cable using RG316 coax. This Pasternack MCX plug to BNC male cable assembly uses a 50 Ohm MCX for connector 1 and a 50 Ohm BNC for connector 2. Our plug MCX to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W01612/HS MCX plug to BNC male cable assembly is constructed with RG316 coax. | 0 | |||
| PE3C1612/HS | Pasternack Enterprises | 0 | ||||
| PE34612/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMB, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm. SMB Jack to TNC Male Cable Using RG178 Coax with HeatShrink. PE34612/HS is a SMB jack to TNC male cable using RG178 coax. This Pasternack SMB jack to TNC male cable assembly uses a 50 Ohm SMB for connector 1 and a 50 Ohm TNC for connector 2. Our jack SMB to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE34612/HS SMB jack to TNC male cable assembly is constructed with RG178 coax. | 0 | |||
| PE3W10612/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm. N Male to BNC Male Cable Using LMR-400-UF Coax with HeatShrink. PE3W10612/HS is a N male to BNC male cable using LMR-400-UF coax. This Pasternack N male to BNC male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm BNC for connector 2. Our male N to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W10612/HS N male to BNC male cable assembly is constructed with LMR-400-UF coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W15612/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMB, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm. SMA Male to SSMB Jack Bulkhead Cable Using RG316-DS Coax with HeatShrink. PE3W15612/HS is a SMA male to SSMB jack bulkhead cable using RG316-DS coax. This Pasternack SMA male to SSMB jack bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SSMB for connector 2. Our male SMA to jack SSMB bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W15612/HS SMA male to SSMB jack bulkhead cable assembly is constructed with RG316-DS coax. | 0 | |||
| PE3W16612/HS-200CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMB, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. TNC Female Bulkhead to SMB Plug Low Loss Cable 200 CM Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly TNC female bulkhead to SMB plug low loss cable 200 cm length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC female bulkhead to SMB plug low loss cable 200 cm length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to SMB cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a TNC bulkhead cable connection on one end and a SMB cable connection on the other. Our low loss TNC to SMB cable assembly has a female gender on end 1 and a plug on end 2. PE3W16612/HS-200CM can also be known as a low loss TNC jack to SMB male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W16612/HS-200CM RF cable has a PVC jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. TNC jack to SMB male cable assembly PE3W16612/HS-200CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to SMB cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the clamp/solder attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W16612/HS-200CM can also be used in the other direction and will be a SMB plug to TNC female bulkhead cable assembly if the opposite connectivity is required. Low loss TNC jack bulkhead to SMB male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to SMB cable assembly for quick shipment worldwide. Variations of TNC and SMB cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to SMB low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W20612/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: FAKRA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. Bordeaux FAKRA Jack to SMA Female Bulkhead Cable Using RG316 Coax with HeatShrink. PE3W20612/HS is a FAKRA jack to SMA female bulkhead cable using RG316 coax. This Pasternack FAKRA jack to SMA female bulkhead cable assembly uses a 50 Ohm FAKRA for connector 1 and a 50 Ohm SMA for connector 2. Our jack FAKRA to female SMA bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20612/HS FAKRA jack to SMA female bulkhead cable assembly is constructed with RG316 coax. | 0 | |||
| PE3W16612/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMB, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. TNC Female Bulkhead to SMB Plug Low Loss Cable Using LMR-100 Coax with HeatShrink., Radio frequency assembly TNC female bulkhead to SMB plug low loss cable using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC female bulkhead to SMB plug low loss cable using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to SMB cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a TNC bulkhead cable connection on one end and a SMB cable connection on the other. Our low loss TNC to SMB cable assembly has a female gender on end 1 and a plug on end 2. PE3W16612/HS can also be known as a low loss TNC jack to SMB male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W16612/HS RF cable has a PVC jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. TNC jack to SMB male cable assembly PE3W16612/HS is built with LMR-100A which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to SMB cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the clamp/solder attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W16612/HS can also be used in the other direction and will be a SMB plug to TNC female bulkhead cable assembly if the opposite connectivity is required. Low loss TNC jack bulkhead to SMB male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to SMB cable assembly for quick shipment worldwide. Variations of TNC and SMB cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to SMB low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 0 | |||
| PE3W16612/HS-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMB, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. TNC Female Bulkhead to SMB Plug Low Loss Cable 36 Inch Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly TNC female bulkhead to SMB plug low loss cable 36 inch length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC female bulkhead to SMB plug low loss cable 36 inch length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to SMB cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a TNC bulkhead cable connection on one end and a SMB cable connection on the other. Our low loss TNC to SMB cable assembly has a female gender on end 1 and a plug on end 2. PE3W16612/HS-36 can also be known as a low loss TNC jack to SMB male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W16612/HS-36 RF cable has a PVC jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. TNC jack to SMB male cable assembly PE3W16612/HS-36 is built with LMR-100A which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to SMB cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the clamp/solder attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W16612/HS-36 can also be used in the other direction and will be a SMB plug to TNC female bulkhead cable assembly if the opposite connectivity is required. Low loss TNC jack bulkhead to SMB male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to SMB cable assembly for quick shipment worldwide. Variations of TNC and SMB cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to SMB low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3612/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG6A/U, RF Cable Type: RG6, RF Cable Impedance: 75 Ohm. 75 Ohm N Male to 75 Ohm N Male Cable Using 75 Ohm RG6 Coax with HeatShrink. PE3612/HS is a N male to N male cable using RG6 coax. This Pasternack N male to N male cable assembly uses a 75 Ohm N for connector 1 and a 75 Ohm N for connector 2. Our male N to male N cable assembly uses a flexible cable type that is 75 Ohm. Pasternack PE3612/HS N male to N male cable assembly is constructed with RG6 coax. | 0 | |||
| PE3W16612/HS-100CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMB, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. TNC Female Bulkhead to SMB Plug Low Loss Cable 100 CM Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly TNC female bulkhead to SMB plug low loss cable 100 cm length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC female bulkhead to SMB plug low loss cable 100 cm length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to SMB cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a TNC bulkhead cable connection on one end and a SMB cable connection on the other. Our low loss TNC to SMB cable assembly has a female gender on end 1 and a plug on end 2. PE3W16612/HS-100CM can also be known as a low loss TNC jack to SMB male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W16612/HS-100CM RF cable has a PVC jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. TNC jack to SMB male cable assembly PE3W16612/HS-100CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to SMB cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the clamp/solder attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W16612/HS-100CM can also be used in the other direction and will be a SMB plug to TNC female bulkhead cable assembly if the opposite connectivity is required. Low loss TNC jack bulkhead to SMB male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to SMB cable assembly for quick shipment worldwide. Variations of TNC and SMB cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to SMB low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W16612/HS-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMB, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. TNC Female Bulkhead to SMB Plug Low Loss Cable 48 Inch Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly TNC female bulkhead to SMB plug low loss cable 48 inch length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC female bulkhead to SMB plug low loss cable 48 inch length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to SMB cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a TNC bulkhead cable connection on one end and a SMB cable connection on the other. Our low loss TNC to SMB cable assembly has a female gender on end 1 and a plug on end 2. PE3W16612/HS-48 can also be known as a low loss TNC jack to SMB male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W16612/HS-48 RF cable has a PVC jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. TNC jack to SMB male cable assembly PE3W16612/HS-48 is built with LMR-100A which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to SMB cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the clamp/solder attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W16612/HS-48 can also be used in the other direction and will be a SMB plug to TNC female bulkhead cable assembly if the opposite connectivity is required. Low loss TNC jack bulkhead to SMB male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to SMB cable assembly for quick shipment worldwide. Variations of TNC and SMB cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to SMB low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W08612/HS | Pasternack Enterprises | 0 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |