| Electronic Components Datasheet Search |
|
610HTTDR10 Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() TME | 4610H-101-332LF | Bourns Inc | Resistor network: X; 3.3kΩ; ±2%; No.of resistors: 9; 300mW; THT RoHS : Compliant |
| 7,450 | |
| 4610H-101-221LF | Bourns Inc | Resistor network: X; 220Ω; ±2%; No.of resistors: 9; 300mW; THT RoHS : Compliant |
| 4,575 | ||
| BCX5610H6327XTSA1 | Infineon Technologies AG | Transistor: NPN; bipolar; 80V; 1A; 2W; SOT89 RoHS : Compliant |
| 3,800 | ||
| 610HR050E | The Heico Companies LLC | 50mΩ; ±3%; 1W; Leads: axial; 60; 19mm |
| 2,585 | ||
| C01610H0140031 | Amphenol Corporation | Connector: circular; plug; PIN: 15; industrial; C16-3; 100V; IP65 RoHS : Compliant |
| 372 | ||
| C01610H00600010 | Amphenol Corporation | Connector: circular; plug; PIN: 7; male; industrial; M; 250V; crimped RoHS : Compliant |
| 250 | ||
| C01610H0140021 | Amphenol Corporation | Connector: circular; plug; PIN: 15; industrial; C16-3; 100V; IP65 RoHS : Compliant |
| 150 | ||
| C01610H0120042 | Amphenol Corporation | Connector: circular; plug; male; industrial; C16-3; straight; IP65 RoHS : Compliant |
| 54 | ||
| MID3610H41 | MOREK | Support insulator; L: 36mm; Ø: 33mm; Uoper: 1kV; UL94V-0; Body: red |
| 29 | ||
| 183610H | KING TONY | Screwdriver bit: hex key; HEX 10mm; 5/16"; Overall len: 36mm |
| 3 | ||
| NSYTBS191610HT | Schneider Electric | Enclosure: multipurpose; X: 164mm; Y: 193mm; Z: 105mm; Thalassa TBS |
| 2 | ||
| NSYTBP191610H | Schneider Electric | Enclosure: multipurpose; X: 164mm; Y: 192mm; Z: 105mm; polycarbonate RoHS : Compliant |
| 1 | ||
| C01610H0140032 | Amphenol Corporation | Connector: circular; plug; PIN: 15; male; industrial; C16-3; 400V RoHS : Compliant |
| 0 | ||
| 35610H | Mega Electronics Inc | Wrench: combination spanner; double-sided; 10mm; steel |
| 0 | ||
| 163610H | KING TONY | Screwdriver bit: hex key; HEX 10mm; Socket size: 10mm |
| 0 | ||
![]() Avnet Americas | VLS201610HBX-4R7M-1 | TDK Corporation | Power Inductor (SMD), 4.7 ?H, 950 mA, Shielded, 1.2 A, VLS-HBX-1 Series - Tape and Reel (Alt: VLS201610HBX-4R7M-1) RoHS : Compliant |
| 36,000 | |
| 380AS001B1610H3 | Glenair Inc | - Bulk (Alt: 380AS001B1610H3) RoHS : Not Compliant | 0 | |||
| 610HS011NF19 | Glenair Inc | - Bulk (Alt: 610HS011NF19) RoHS : Not Compliant | 0 | |||
| C01610H0120042 | Amphenol Corporation | Circular Connector, Ecomate C016 Series, Cable Mount Plug, 12 Contacts - Boxed Product (Development Kits) (Alt: C01610H0120042) RoHS : Compliant |
| 0 | ||
| 4610H-101-181LF | Bourns Inc | - Bulk (Alt: 4610H-101-181LF) RoHS : Compliant |
| 0 | ||
| TN1610H-6T | STMicroelectronics | - Rail/Tube (Alt: TN1610H-6T) RoHS : Not Compliant |
| 0 | ||
| VLS201610HBX-R68M-1 | TDK Corporation | - Tape and Reel (Alt: VLS201610HBX-R68M-1) RoHS : Compliant |
| 0 | ||
| C01610H00601010 | Amphenol Corporation | Connector Circular Housing Plug Cable Mount PIN 6+PE Position Polyamide 6.6 - Boxed Product (Development Kits) (Alt: C01610H00601010) RoHS : Compliant |
| 0 | ||
| 4610H-101-682LF | Bourns Inc | - Bulk (Alt: 4610H-101-682LF) RoHS : Compliant |
| 0 | ||
| 4610H-102-102LF | Bourns Inc | - Bulk (Alt: 4610H-102-102LF) RoHS : Compliant |
| 0 | ||
| 4610H-102-184LF | Bourns Inc | - Bulk (Alt: 4610H-102-184LF) RoHS : Compliant |
| 0 | ||
| 4610H-102-472LF | Bourns Inc | - Bulk (Alt: 4610H-102-472LF) RoHS : Compliant |
| 0 | ||
| 4610H-101-103LF | Bourns Inc | - Bulk (Alt: 4610H-101-103LF) RoHS : Compliant |
| 0 | ||
| 4610H-101-392LF | Bourns Inc | - Bulk (Alt: 4610H-101-392LF) RoHS : Compliant |
| 0 | ||
| 4610H-102-470LF | Bourns Inc | - Bulk (Alt: 4610H-102-470LF) RoHS : Compliant |
| 0 | ||
![]() Newark | MAX9610HEXK+T | Analog Devices Inc | Curr Sense Amplifier, -40 To 85Deg C; |Analog Devices, Inc. MAX9610HEXK+T RoHS : Compliant |
| 2,847 | |
| MAX9610HEXK+T | Analog Devices Inc | Curr Sense Amplifier, -40 To 85Deg C; |Analog Devices, Inc. MAX9610HEXK+T RoHS : Compliant |
| 2,847 | ||
| LPWI201610H1R0T | Littelfuse Inc | Rf Inductor, 1Uh, 3.9A, Shielded, 0806; |Littelfuse LPWI201610H1R0T RoHS : Compliant |
| 2,825 | ||
| LPWI201610H1R0T | Littelfuse Inc | Rf Inductor, 1Uh, 3.9A, Shielded, 0806; |Littelfuse LPWI201610H1R0T RoHS : Compliant |
| 2,825 | ||
| C016 10H014 003 2 | Amphenol Sine Systems | Circular Connector, Plug, 15Pos, Crimp; Connector Type:Circular Industrial; Product Range:Ecomate C16-3 Series; Circular Connector Shell Style:Cable Mount Plug; No. Of Contacts:15Contacts; Coupling Style:Bayonet; Contact Material:- Rohs Compliant: Yes RoHS : Compliant |
| 462 | ||
| C016 10H006 010 12 | Amphenol Sine Systems | Plug, Free, Ecomate, 6+Pe; |Amphenol Sine/tuchel C016 10H006 010 12 RoHS : Compliant |
| 460 | ||
| TN1610H-6T | STMicroelectronics | Thyristor, 16A, 600V, To-220Ab-3; Available Until Stocks Are Exhausted |Stmicroelectronics TN1610H-6T RoHS : Compliant |
| 158 | ||
| C016 10H006 000 10 | Amphenol Sine Systems | Circular Connector, Plug, 6+Pe, Cable; |Amphenol Sine/tuchel C016 10H006 000 10 RoHS : Compliant |
| 131 | ||
| NSYTBS191610HT | Schneider Electric | Industrial Box, Wall Mnt, Abs, Gry/Clear; |Schneider Electric NSYTBS191610HT RoHS : Compliant |
| 106 | ||
| C01610H0120042 | Amphenol Sine Systems | Cir Conn, C01610H0120042; |Amphenol Sine/tuchel C01610H0120042 RoHS : Compliant |
| 76 | ||
| M6 10 HH88SC Z100 | TR Fastenings | Set Screw, Ht, Bzp, M6X10, Pk100; |Tr Fastenings M6 10 HH88SC Z100 RoHS : Compliant |
| 14 | ||
| PJU181610HF | Hammond Manufacturing | Plastic Enclosure, Solid Cover; |Hammond PJU181610HF RoHS : Compliant |
| 9 | ||
| PCJ201610HF | Hammond Manufacturing | Plastic Enclosure, Solid Cover; |Hammond PCJ201610HF RoHS : Compliant |
| 9 | ||
| PJU181610H | Hammond Manufacturing | Plastic Enclosure, Solid Cover; |Hammond PJU181610H RoHS : Compliant |
| 6 | ||
| PCJ181610H | Hammond Manufacturing | Plastic Enclosure, Solid Cover; |Hammond PCJ181610H RoHS : Compliant |
| 3 | ||
![]() Analog Devices Inc | MAX9610HEXK+T | Analog Devices Inc | 1µA, µDFN/SC70, Lithium-Ion Ba RoHS : Compliant |
| 32,912 | |
| MAX9610HELT+T | Analog Devices Inc | 1µA, µDFN/SC70, Lithium-Ion Ba RoHS : Compliant |
| 67 | ||
| LT8610HMSE#PBF | Analog Devices Inc | 42V,2.5A Sync Buck Reg w/ 2.5m RoHS : Compliant |
| 36 | ||
| LT8610HMSE#WTRPBF | Analog Devices Inc | 42V,2.5A Sync Buck Reg w/ 2.5m RoHS : Compliant |
| 0 | ||
| MAX9610HEXK+ | Analog Devices Inc | 1µA, µDFN/SC70, Lithium-Ion Ba RoHS : Compliant | 0 | |||
| LT8610HMSE#TRPBF | Analog Devices Inc | 42V,2.5A Sync Buck Reg w/ 2.5m RoHS : Compliant |
| 0 | ||
| MAX9610HELT+ | Analog Devices Inc | 1µA, µDFN/SC70, Lithium-Ion Ba RoHS : Compliant | 0 | |||
| LT8610HMSE#WPBF | Analog Devices Inc | 42V,2.5A Sync Buck Reg w/ 2.5m RoHS : Compliant |
| 0 | ||
![]() RS | C016 10H006 010 12 | Amphenol Tuchel | CIRCULAR PLASTIC MALE CABLE CONNECTOR, FOR 6+GND CRIMP CONT BLACK |
| 758 | |
| 17036 10 H100 | Volex Group | POWER CORD, C5, 5-15P PLUG, 3 COND SPT-2 CBL, 6FT., 18 AWG, PVC JKT, PLASTIC INS |
| 418 | ||
| C016 10H006 000 12 | Amphenol Tuchel | CIRCULAR PLASTIC MALE CABLE CONNECTOR, FOR 6+GND CRIMP CONTACT BLACK |
| 375 | ||
| 1610-H2-20A | E-T-A | CIRCUIT BREAKER THERMAL AUTOMOTIVE MINI RESET AND MANUAL RELEASE 1P 12VDC 20A RoHS : Compliant |
| 49 | ||
| 1610-H2-10A | E-T-A | CIRCUIT BREAKER THERMAL AUTOMOTIVE MINI RESET AND MANUAL RELEASE 1P 12VDC 10A RoHS : Compliant |
| 40 | ||
| NSYTBP191610H | Schneider Electric | PC BOX IP66 IK08 RAL7035 INT.H175W150D100 EXT.H193W164D105 OPAQUE PC COVER H40 RoHS : Compliant |
| 2 | ||
| SPS610HGRA | Tripp Lite | SURGE PROTECTOR STRIP MEDICAL RT ANGLE PLUG 6 OUTLET 10FT CORD |
| 1 | ||
| C016 10H017 003 1 | Amphenol Tuchel | MALE CABLE CONNECTOR 17+PE, ECOMATE CIRCULAR CONNECTORS SERIES |
| 1 | ||
| AA1-B0-16-610-HD2-C (AA1B016610HD2C | AA1-B0-16-610-HD2-C | AA1B016610HD2C) | Carling Technologies | CIRCUIT BREAKER, A-SERIES, HYDRAULIC-MAGNETIC |
| 0 | ||
| AA2-B0-22-610-H22-P (AA2B022610H22P | AA2-B0-22-610-H22-P | AA2B022610H22P) | Carling Technologies | CIRCUIT BREAKER, A-SERIES, HYDRAULIC-MAGNETIC |
| 0 | ||
| AM1-B0-10-610-H01-C (AM1B010610H01C | AM1-B0-10-610-H01-C | AM1B010610H01C) | Carling Technologies | CIRCUIT BREAKER, A-SERIES, HYDRAULIC-MAGNETIC |
| 0 | ||
| AA1-B0-34-610-HB2-C (AA1B034610HB2C | AA1-B0-34-610-HB2-C | AA1B034610HB2C) | Carling Technologies | CIRCUIT BREAKER, A-SERIES, HYDRAULIC-MAGNETIC |
| 0 | ||
| AA1-B0-14-610-H92-D (AA1B014610H92D | AA1-B0-14-610-H92-D | AA1B014610H92D) | Carling Technologies | CIRCUIT BREAKER, A-SERIES, HYDRAULIC-MAGNETIC |
| 0 | ||
| AJ1-B0-14-610-H24-D (AJ1B014610H24D | AJ1-B0-14-610-H24-D | AJ1B014610H24D) | Carling Technologies | CIRCUIT BREAKER, A-SERIES, HYDRAULIC-MAGNETIC |
| 0 | ||
| AA1-B0-14-610-H22-MK (AA1B014610H22MK | AA1-B0-14-610-H22-MK | AA1B014610H22MK) | Carling Technologies | CIRCUIT BREAKER, A-SERIES, HYDRAULIC-MAGNETIC |
| 0 | ||
![]() STMicroelectronics | T1610H-6T | STMicroelectronics | 16 A - 600 V - 150 °C logic level H-series Triac in TO-220AB RoHS : Compliant |
| 2,752 | |
| TN1610H-6I | STMicroelectronics | 16 A 600 V High Temperature SCR in insulated TO-220I RoHS : Compliant |
| 1,438 | ||
| TN1610H-6T | STMicroelectronics | High temperature 16 A 600 V TO220 Thyristor SCRs RoHS : Compliant |
| 0 | ||
T610H-6T![]() | STMicroelectronics | 6 A - 600 V - 150 °C logic level H-series Triac in TO-220AB RoHS : Compliant |
| 0 | ||
| TN1610H-6FP | STMicroelectronics | High temperature 16 A 600 V TO220-FP Thyristor SCRs RoHS : Compliant |
| 0 | ||
![]() Bisco Industries | 8129-A-0256-10-HL | Amatom Electronic Hardware | 25 | |||
| NAS6306-10H | NAS Bolts | 21 | ||||
| AD610H | Pop Rivets | 10 | ||||
| CA18161-0HS | Alcoa Fastening Systems Aerospace | 3 | ||||
![]() Rochester Electronics | BCX5610H6327XTSA1 | Infineon Technologies AG | Small Signal Bipolar Transistor, 1A I(C), 80V V(BR)CEO, 1-Element, NPN, Silicon RoHS : Compliant |
| 1,000 | |
PALCE610H-20/BLA![]() | AMD | SPLD PAL 16 Macrocell 4.5V - 5.5V 24-DIP RoHS : Not Compliant |
| 622 | ||
MAX9610HELT+T![]() | Maxim Integrated Products | Power Supply Support Circuit, Fixed, 1 Channel, BICMOS RoHS : Compliant |
| 40,000 | ||
| T1610H-6T | STMicroelectronics | TRIAC Logic - Sensitive Gate 600V 16A TO-220-3 Tube RoHS : Compliant |
| 9,700 | ||
| TN1610H-6T | STMicroelectronics | SCR Board Standard Recovery 600V 16A TO-220-3 Tube RoHS : Compliant |
| 16,000 | ||
![]() Sager | PBA-BA-24-610-H2B-AG | Carling Technologies | Circuit Breakers 60Hz Med, 10A Dual 120VAC 1 pole | 0 | ||
| B90610HD | ABB Group | Wire Ducting & Raceways | 0 | |||
| BA2-B0-22-610-H22-E | Carling Technologies | Circuit Breakers BA2B022610H22E RoHS : Compliant |
| 0 | ||
| X1U336-10-HM | ABB Group | Thomas & Betts |
| 0 | ||
| AA1-B0-34-610-HB2-C | Carling Technologies | Circuit Breakers AA1B034610HB2C RoHS : Compliant |
| 0 | ||
| HTSW-106-10-H-S-RA | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| HW-26-10-H-D-250-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| HW-26-10-H-D-575-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| HW-26-10-H-S-675-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| TX41AB00-1610H | TE Connectivity | Circular MIL Spec Strain Reliefs & Adapters TX41AB00-1610H |
| 0 | ||
| LPWI201610H1R0T | Littelfuse Inc | PWI 2016 1.0T 1.00UH HIGH CURRENT RoHS : Compliant |
| 0 | ||
| BA2-B0-24-610-H22-E | Carling Technologies | Circuit Breakers BA2B024610H22E RoHS : Compliant |
| 0 | ||
| MTMM-106-10-H-D-000 | Samtec Inc | Headers & Wire Housings Variable Post Height Header Strips, 2.00 mm Pitch RoHS : Compliant |
| 0 | ||
| MTSW-106-10-H-D-453-RA | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| MTSW-136-10-H-D-340 | Samtec Inc | Headers & Wire Housings Variable Height PCB Header Strips, 0.100 pitch RoHS : Compliant |
| 0 | ||
![]() ComSIT USA | BCP5610H6327 | Infineon Technologies AG | NPN SILICON AF TRANSISTOR Power Bipolar Transistor, 1A I(C), 80V V(BR)CEO, 1-Element, NPN, Silicon, Plastic/Epoxy, 4 Pin RoHS : Compliant | 27,898 | ||
| PALCE610H15PC | AMD | EE CMOS HIGH PERFORMANCE PROGRAMMABLE ARRAY LOGIC EE PLD, 15ns, PAL-Type, CMOS, PDIP24 RoHS : Not Compliant | 2,982 | |||
| MB86H610HPB200FGE1 | FUJITSU Limited | Consumer IC RoHS : Compliant | 782 | |||
| PALCE610H25JC | AMD | EE CMOS HIGH PERFORMANCE PROGRAMMABLE ARRAY LOGIC EE PLD, 25ns, PAL-Type, CMOS, PQCC28 RoHS : Not Compliant | 125 | |||
| MB86H610HPB6F1AGE1 | FUJITSU Limited | Electronic Component RoHS : Compliant | 6 | |||
![]() Interstate Connecting Components | C016 10H006 000 10 | Amphenol Sine Systems | MALE CABLE CONNECTOR C16-M |
| 99 | |
| C016 10H019 003 2 | Amphenol Sine Systems | 19PE MALE CABLE CONNECTOR WITH | 0 | |||
| C01610H0120042 | Amphenol Sine Systems | MALE PLUG SIZE 2 3PE9 CRIMP 14 | 0 | |||
| C01610H0150021 | Amphenol Sine Systems | MALE PLUG SIZE 1 3PE12 CRIMP 1 | 0 | |||
| 380AS001B1610H3 | Glenair Inc | EMI/RFI NON-ENVIRO BS STRAIGHT W STRAIN RELIEF RoHS : Not Compliant |
| 0 | ||
| 610HS011NF19 | Glenair Inc | ACCESSORIES - E NUT RoHS : Not Compliant |
| 0 | ||
| C01610H00601010 | Amphenol Sine Systems | MALE PLUG BLUE STRAIN RELIEF 6 | 0 | |||
| 380FS001NF1610H6 | Glenair Inc | EMI/RFI NON-ENVIRO BS STRAIGHT W STRAIN RELIEF RoHS : Not Compliant | 0 | |||
| C01610H0150031 | Amphenol Sine Systems | MALE PLUG SIZE 1 3PE12 CRIMP 1 | 0 | |||
| 370AH001Z11610H | Glenair Inc | ENVIROMENTAL BACKSHELL 45 DEG SPIN COUPLING RoHS : Compliant | 0 | |||
| 380FJ115M1610H | Glenair Inc | EMI/RFI NON-ENVIRO BS 90 DEG W STRAIN RELIEF RoHS : Compliant | 0 | |||
| 610HS011B21 | Glenair Inc | ACCESSORY - E NUT RoHS : Not Compliant |
| 0 | ||
| TX41AB00-1610H | TE Connectivity | TX41AB00-1610H | 0 | |||
| 610HS012M17 | Glenair Inc | ACCESSORIES - E NUT RoHS : Compliant |
| 0 | ||
| 380AS001C1610H6 | Glenair Inc | EMI/RFI NON-ENVIRO BS STRAIGHT W STRAIN RELIEF RoHS : Compliant |
| 0 | ||
![]() PEI Genesis | 75-069236-10H | Amphenol Corporation |
| 165 | ||
| 10-214536-10H | Amphenol Corporation |
| 165 | |||
| C016-10H014-002-1 | Amphenol Tuchel |
| 0 | |||
| C016-10H014-013-5 | Amphenol Tuchel |
| 0 | |||
| C016-10H017-003-1 | Amphenol Tuchel |
| 0 | |||
| C016-10H015-002-1 | Amphenol Tuchel |
| 0 | |||
| C016-10H017-002-1 | Amphenol Corporation |
| 0 | |||
| C016-10H017-002-1 | Amphenol Tuchel |
| 0 | |||
| C016-10H019-004-2 | Amphenol Tuchel |
| 0 | |||
| C016-10H014-005-2 | Amphenol Tuchel |
| 0 | |||
| C016-10H019-003-2 | Amphenol Tuchel |
| 0 | |||
| 10-729876-10H | Amphenol Corporation |
| 0 | |||
| C016-10H014-003-1 | Amphenol Tuchel |
| 0 | |||
| 10-457996-10H | Amphenol Corporation |
| 0 | |||
| C016-10H014-003-2 | Amphenol Tuchel |
| 0 | |||
![]() Powell Electronics | M55302/66-10H | AirBorn a molex company | MIL-DTL-55302 Series Connector |
| 193 | |
| 10-214536-10H | Amphenol Corporation | ER 48C 48#16 SKT PLUG |
| 108 | ||
| 75-069236-10H | Amphenol Corporation | CONNECTOR |
| 108 | ||
| C01610H0080021 | Amphenol Corporation | Connector RoHS : Compliant |
| 46 | ||
| TX41AB00-1610H | TE Connectivity | Connectors |
| 15 | ||
| 390AB001NF1610H-98J | Glenair Inc | ACCESSORIES - RFI/EMI ENVIRON ADAPTER |
| 15 | ||
| C3R363610HCR | Hammond Manufacturing | 3R HINGE COV 36X36X10 |
| 5 | ||
| PCJ181610HF | Hammond Manufacturing | PC NON MET HINGE FLANGE RoHS : Compliant |
| 5 | ||
| PJU181610H | Hammond Manufacturing | NONMET HNG SC CLR CVR FEET |
| 4 | ||
| PJU201610HF | Hammond Manufacturing | NONMET HNG SC CVR FLAN RoHS : Compliant |
| 3 | ||
| PCJ201610HF | Hammond Manufacturing | Polycarb 20 x 16 x 10 Hinge w/Flange RoHS : Compliant |
| 3 | ||
| PJU181610HF | Hammond Manufacturing | NONMET LIFT HNG SC CVR FLAN RoHS : Compliant |
| 1 | ||
| PJU201610HW | Hammond Manufacturing | NONMET HNG SC WDN CVR FEET |
| 1 | ||
| 610HS011B15 | Glenair Inc | ACCESSORIES - NUTS (AN HARDWARE) RoHS : Not Compliant |
| 1 | ||
![]() Chip 1 Exchange | PG610H | INSTOCK | 1,296 | |||
| MB86H610HPB-6F1T-GE1 | FUJITSU Semiconductor Limited | INSTOCK | 1,192 | |||
| VLS201610HBX-1R0M-1 | TDK Corporation | INSTOCK RoHS : Compliant | 485 | |||
| VLS201610HBX-R68M | TDK Corporation | INSTOCK RoHS : Compliant | 30 | |||
![]() Avnet Abacus | VLS201610HBX-2R2M-1 | TDK Corporation | Power Inductor SMD 22 H 17 A Shielded 19 A VLSHBX1 Series (Alt: VLS201610HBX-2R2M-1) RoHS : Compliant | 16,000 | ||
| C01610H00601010 | Amphenol Corporation | Circular Connector Circular Industrial Ecomate C016 Series (Alt: C01610H00601010) RoHS : Compliant | 1,750 | |||
| C01610H00601012 | Amphenol Corporation | Circular Connector 6PE Circular Industrial Ecomate C016 Series Cable Mount Plug 7 Contacts (Alt: C01610H00601012) RoHS : Compliant | 750 | |||
| C01610H00600010 | Amphenol Corporation | Circular Connector Circular Industrial Ecomate C016 Series (Alt: C01610H00600010) RoHS : Compliant | 250 | |||
| C01610H00600012 | Amphenol Corporation | Circular Connector 6PE Circular Industrial Ecomate C016 Series Cable Mount Plug 6 Contacts (Alt: C01610H00600012) RoHS : Compliant | 250 | |||
| C01610H0140021 | Amphenol Corporation | Circular Connector ecomate C16 Series Cable Mount Plug 15 Contacts (Alt: C01610H0140021) RoHS : Compliant | 100 | |||
| C01610H0140031 | Amphenol Corporation | Circular Connector ecomate C16 Series Cable Mount Plug 15 Contacts (Alt: C01610H0140031) RoHS : Compliant | 100 | |||
| C01610H0080031 | Amphenol Corporation | 8PE Male cable connector with strain relief and clamping ring For use with crimp contacts sold s (Alt: C01610H0080031) RoHS : Compliant | 100 | |||
| C01610H0120042 | Amphenol Corporation | 12PE Male cable connector with strain relief and clamping ring For use with crimp contacts sold (Alt: C01610H0120042) RoHS : Compliant | 0 | |||
| C01610H0150021 | Amphenol Corporation | Conn Circular M 16 POS Crimp ST Cable Mount 16 Terminal 1 Port (Alt: C01610H0150021) RoHS : Compliant | 0 | |||
| 4610H-101-181LF | Bourns Inc | (Alt: 4610H-101-181LF) RoHS : Compliant | 0 | |||
| PC610H501AP20LF | TE Connectivity | Rotary Potentiometer Conductive Polymer 500 Ohm 1Turn Linear 50 mW 20 (Alt: 1-1624231-1) RoHS : Compliant | 0 | |||
| 4610H-101-682LF | Bourns Inc | (Alt: 4610H-101-682LF) RoHS : Compliant | 0 | |||
| 4610H-102-102LF | Bourns Inc | (Alt: 4610H-102-102LF) RoHS : Compliant | 0 | |||
| VLS201610HBX-R68M-1 | TDK Corporation | Power Inductor SMD 680 nH 29 A Shielded 353 A VLSHBX1 Series (Alt: VLS201610HBX-R68M-1) RoHS : Compliant | 0 | |||
![]() Avnet Asia | BCP56-10HX![]() | Nexperia | (Alt: BCP56-10HX) RoHS : Compliant | 0 | ||
| VLS201610HBX-1R0M-1 | TDK Corporation | Power Inductor (SMD), 1 uH, ? 20%, 2.5 A, Shielded, 2.9 A, 2mm x 1.6mm x 1mm (Alt: VLS201610HBX-1R0M-1) RoHS : Compliant | 0 | |||
![]() Avnet Silica | TN1610H-6T | STMicroelectronics | (Alt: TN1610H-6T) RoHS : Compliant | 5,050 | ||
| TN1610H-6I | STMicroelectronics | (Alt: TN1610H-6I) RoHS : Compliant | 4,900 | |||
| T1610H-6T | STMicroelectronics | Thyristor TRIAC 600V 168A 3Pin TO220AB Tube (Alt: T1610H-6T) RoHS : Compliant | 3,100 | |||
T610H-6T![]() | STMicroelectronics | (Alt: T610H-6T) RoHS : Compliant | 0 | |||
| GBU610_HF | Diodes Incorporated | (Alt: GBU610_HF) RoHS : Compliant | 0 | |||
BCP56-10HX![]() | Nexperia | Bipolar BJT Single Transistor NPN 80 V 1 A 22 W SOT223 Surface Mount (Alt: BCP56-10HX) RoHS : Compliant | 0 | |||
| RW610HN/A2IK | NXP Semiconductors | (Alt: RW610HN/A2IK) RoHS : Compliant | 0 | |||
| RW610HN/A2IMP | NXP Semiconductors | (Alt: RW610HN/A2IMP) RoHS : Compliant | 0 | |||
![]() Braemac Americas-Symmetry | IC-PT2610HOQFN32-5X5 | iC-Haus | 6-Ch. Phased Array Opto Encoder 26-1000, adj. Gating |
| 0 | |
![]() Component Electronics, Inc | 4610H-101-182LF | Bourns Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 1,300 | |
| 4610H-701-500/390L | Bourns Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 550 | ||
| 4610H-702-820/101 | Bourns Inc | IN STOCK SHIP TODAY |
| 350 | ||
| 610HR030E | Ohmite Mfg Co | IN STOCK SHIP TODAY RoHS : Compliant |
| 124 | ||
| 4610H-101-221 | Bourns Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 100 | ||
| 4610H-M99-00C | Bourns Inc | IN STOCK SHIP TODAY | 80 | |||
| 4610H-101-103 | Bourns Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 71 | ||
| 4610H-101-102 | Bourns Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 68 | ||
| 4610H-101-471 | Bourns Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 22 | ||
| 390AA036M1610H | Glenair Inc | IN STOCK SHIP TODAY | 1 | |||
PALCE610H-25PC![]() | AMD | IN STOCK SHIP TODAY RoHS : Not Compliant | 1 | |||
PALCE610H-15PC![]() | AMD | IN STOCK SHIP TODAY RoHS : Not Compliant | 1 | |||
![]() DB Roberts | AD610H | Pop Rivets | 0 | |||
![]() EBV Elektronik | BCX5610H6327XTSA1 | Infineon Technologies AG | Trans GP BJT NPN 80V 1A 4Pin3Tab SOT89 TR (Alt: SP001125480) RoHS : Compliant | 1,000 | ||
| T1610H-6T | STMicroelectronics | Thyristor TRIAC 600V 168A 3Pin TO220AB Tube (Alt: T1610H-6T) RoHS : Compliant | 0 | |||
| TN1610H-6T | STMicroelectronics | (Alt: TN1610H-6T) RoHS : Compliant | 0 | |||
| TN1610H-6I | STMicroelectronics | (Alt: TN1610H-6I) RoHS : Compliant | 0 | |||
| BCP5610H6327XTSA1 | Infineon Technologies AG | (Alt: SP000748366) RoHS : Compliant | 0 | |||
![]() Master Electronics | C01610H00601010 | Amphenol Tuchel | 6+PE Male straight cable connector with strain relief internal cable clamping and clamping ring. Crimp contacts sold separately. Available in gold or silver plating. RoHS : Compliant |
| 552 | |
| C01610H0140032U | Amphenol Tuchel | The C01610H0140032 is a circular thermoplastic connector from the ecomate® C16 series designed for industrial applications in rough environments. RoHS : Compliant |
| 64 | ||
| A36R3610HCR | Pentair Equipment Protection - Hoffman | Medium Drip-Shield Hinged-Cover Type 3R 36.00x36.00x10.00 Gray Steel RoHS : Compliant |
| 2 | ||
| 4610H-101-181LF | Bourns Inc | Res Thick Film NET 180 Ohm 2% 2W ƒA€A±100ppm/ƒA€A°C BUS Conformal Coated 10-Pin SIP Pin Thru-Hole Bulk RoHS : Compliant |
| 0 | ||
| BA2-B0-22-610-H22-E | Carling Technologies | 2-pole hydraulic-magnetic circuit breaker with handle actuator AC short time delay 10A current rating and screw M5 bus type terminals. RoHS : Compliant |
| 0 | ||
| HW-26-10-H-S-675-SM-A | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TSW-126-10-H-T | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 4610H-101-682LF | Bourns Inc | Res Thick Film NET 6.8K Ohm 2% 2W ƒA€A±100ppm/ƒA€A°C BUS Conformal Coated 10-Pin SIP Pin Thru-Hole Bulk RoHS : Compliant |
| 0 | ||
| 4610H-102-102LF | Bourns Inc | Res Thick Film NET 1K Ohm 2% 2W ƒA€A±100ppm/ƒA€A°C ISOL Conformal Coated 10-Pin SIP Pin Thru-Hole Bulk RoHS : Compliant |
| 0 | ||
| 4610H-102-184LF | Bourns Inc | Res Thick Film NET 180K Ohm 2% 2W ƒA€A±100ppm/ƒA€A°C ISOL Conformal Coated 10-Pin SIP Pin Thru-Hole Bulk RoHS : Compliant |
| 0 | ||
| 4610H-102-472LF | Bourns Inc | Res Thick Film NET 4.7K Ohm 2% 2W ƒA€A±100ppm/ƒA€A°C ISOL Conformal Coated 10-Pin SIP Pin Thru-Hole Bulk RoHS : Compliant |
| 0 | ||
| AA1-B0-34-610-HB2-C | Carling Technologies | AA1B034610HB2C RoHS : Compliant |
| 0 | ||
| 4610H-101-103LF | Bourns Inc | Res Thick Film NET 10K Ohm 2% 2W ƒA€A±100ppm/ƒA€A°C BUS Conformal Coated 10-Pin SIP Pin Thru-Hole Bulk RoHS : Compliant |
| 0 | ||
| 4610H-101-392LF | Bourns Inc | Res Thick Film NET 3.9K Ohm 2% 2W ƒA€A±100ppm/ƒA€A°C BUS Conformal Coated 10-Pin SIP Pin Thru-Hole Bulk RoHS : Compliant |
| 0 | ||
| 4610H-102-470LF | Bourns Inc | Res Thick Film NET 47 Ohm 1 Ohm 2W ƒA€A±250ppm/ƒA€A°C ISOL Conformal Coated 10-Pin SIP Pin Thru-Hole Bulk RoHS : Compliant |
| 0 | ||
![]() Neutron USA | SPS610HGRA | Tripp Lite | Tripp Lite SPS610HGRA 6-Outlets Surge Suppressor |
| 588 | |
| 1610-H2-10A | E-T-A | Circuit Breakers Miniaturised single pole press-to-reset cycling trip free thermal circuit breaker designed for automotive fuse block installation. Extends the benefits of circuit breaker performance and convenience to applications which are cost cri RoHS : Compliant |
| 50 | ||
| 1610-H2-20A | E-T-A | Circuit Breakers Miniaturised single pole press-to-reset cycling trip free thermal circuit breaker designed for automotive fuse block installation. Extends the benefits of circuit breaker performance and convenience to applications which are cost cri RoHS : Compliant |
| 50 | ||
| 1610-H2-6A | E-T-A | Circuit Breakers Miniaturised single pole press-to-reset cycling trip free thermal circuit breaker designed for automotive fuse block installation. Extends the benefits of circuit breaker performance and convenience to applications which are cost cri RoHS : Compliant |
| 50 | ||
| 1610-H2-30A | E-T-A | Circuit Breakers Miniaturised single pole press-to-reset cycling trip free thermal circuit breaker designed for automotive fuse block installation. Extends the benefits of circuit breaker performance and convenience to applications which are cost cri RoHS : Compliant |
| 50 | ||
| 1610-H2-5A | E-T-A | Circuit Breakers Miniaturised single pole press-to-reset cycling trip free thermal circuit breaker designed for automotive fuse block installation. Extends the benefits of circuit breaker performance and convenience to applications which are cost cri RoHS : Compliant |
| 50 | ||
| 1610-H2-8A | E-T-A | Circuit Breakers Miniaturised single pole press-to-reset cycling trip free thermal circuit breaker designed for automotive fuse block installation. Extends the benefits of circuit breaker performance and convenience to applications which are cost cri RoHS : Compliant |
| 50 | ||
| MS116-10-HKF1-11 | ABB Low Voltage Products and Systems | Manual Motor Starter; 3p, Setting: 6.3-10A; Main 690VAC; Thermal/Magnetic; MS116 Series |
| 0 | ||
![]() Pasternack Enterprises US | PE3C9610/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195-UF, RF Cable Type: LMR-195-UF, RF Cable Impedance: 50 Ohm. TNC Male to TNC Female Bulkhead Low Loss Cable Using LMR-195-UF Coax with HeatShrink., Radio frequency assembly TNC male to TNC female bulkhead low loss cable using LMR-195-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to TNC female bulkhead low loss cable using LMR-195-UF coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a TNC cable connection on one end and a TNC bulkhead cable connection on the other. Our low loss TNC to TNC cable assembly has a male gender on end 1 and a female on end 2. PE3C9610/HS can also be known as a low loss TNC plug to TNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C9610/HS RF cable has a TPE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 74% and a minimum RF shielding of 90 dB. Our TNC male to bulkhead TNC female cable has a maximum VSWR of 1.5:1. TNC plug to TNC jack cable assembly PE3C9610/HS is built with LMR-195-UF which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C9610/HS can also be used in the other direction and will be a TNC female bulkhead to TNC male cable assembly if the opposite connectivity is required. Low loss TNC plug to TNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 7,353 | ||
| PE3W12610/HS-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195-UF, RF Cable Type: LMR-195-UF, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. N Male to N Male Low Loss Cable 48 Inch Length Using LMR-195-UF Coax with HeatShrink., Radio frequency assembly N male to N male low loss cable 48 inch length using LMR-195-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 48 inch length using LMR-195-UF coax with heatshrink, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and N type cable connection on the other. Our low loss type N to type N cable assemblies have a male gender on end 1 and male on end 2. PE3W12610/HS-48 can also be known as a low loss type N plug to N type plug cable assembly and will be shipped same-day as it is purchased. Type N plug to type N plug cable assembly PE3W12610/HS-48 is built with LMR-195-UF which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N male to N type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss type N plug to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male low loss cable 48 inch length using LMR-195-UF coax with heatshrink. |
| 2,060 | ||
| PE3W12610/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195-UF, RF Cable Type: LMR-195-UF, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. N Male to N Male Low Loss Cable 24 Inch Length Using LMR-195-UF Coax with HeatShrink., Radio frequency assembly N male to N male low loss cable 24 inch length using LMR-195-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 24 inch length using LMR-195-UF coax with heatshrink, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type cable connection on one end and N type cable connection on the other. Our low loss type N to type N cable assemblies have a male gender on end 1 and male on end 2. PE3W12610/HS-24 can also be known as a low loss type N plug to N type plug cable assembly and will be shipped same-day as it is purchased. Type N plug to type N plug cable assembly PE3W12610/HS-24 is built with LMR-195-UF which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N male to N type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss type N plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male low loss cable 24 inch length using LMR-195-UF coax with heatshrink. |
| 2,060 | ||
| PE3W12610/HS-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195-UF, RF Cable Type: LMR-195-UF, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. N Male to N Male Low Loss Cable 36 Inch Length Using LMR-195-UF Coax with HeatShrink., Radio frequency assembly N male to N male low loss cable 36 inch length using LMR-195-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 36 inch length using LMR-195-UF coax with heatshrink, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type cable connection on one end and N type cable connection on the other. Our low loss type N to type N cable assemblies have a male gender on end 1 and male on end 2. PE3W12610/HS-36 can also be known as a low loss type N plug to N type plug cable assembly and will be shipped same-day as it is purchased. Type N plug to N type plug cable assembly PE3W12610/HS-36 is built with LMR-195-UF which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N male to N type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss type N plug to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male low loss cable 36 inch length using LMR-195-UF coax with heatshrink. |
| 2,060 | ||
| PE3C9610/HS-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195-UF, RF Cable Type: LMR-195-UF, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. TNC Male to TNC Female Bulkhead Low Loss Cable 60 Inch Length Using LMR-195-UF Coax with HeatShrink., Radio frequency assembly TNC male to TNC female bulkhead low loss cable 60 inch length using LMR-195-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to TNC female bulkhead low loss cable 60 inch length using LMR-195-UF coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a TNC cable connection on one end and a TNC bulkhead cable connection on the other. Our low loss TNC to TNC cable assembly has a male gender on end 1 and a female on end 2. PE3C9610/HS-60 can also be known as a low loss TNC plug to TNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C9610/HS-60 RF cable has a TPE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 74% and a minimum RF shielding of 90 dB. Our TNC male to bulkhead TNC female cable has a maximum VSWR of 1.5:1. TNC plug to TNC jack cable assembly PE3C9610/HS-60 is built with LMR-195-UF which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C9610/HS-60 can also be used in the other direction and will be a TNC female bulkhead to TNC male cable assembly if the opposite connectivity is required. Low loss TNC plug to TNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 1,745 | ||
| PE3W17610/HS-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: QMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. N Female Bulkhead to QMA Male Right Angle Cable 36 Inch Length Using RG142 Coax with HeatShrink., Radio frequency assembly N female bulkhead to QMA male right angle cable 36 inch length using RG142 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The N female bulkhead to QMA male right angle cable 36 inch length using RG142 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to QMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a type N bulkhead cable connection on one end and a right angle QMA cable connection on the other. Our type N to right angle QMA cable assembly has a female gender on end 1 and a male on end 2. PE3W17610/HS-36 can also be known as a type N jack to right angle QMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.97-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W17610/HS-36 RF cable has a FEP jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 70 dB. Type N jack to QMA plug cable assembly PE3W17610/HS-36 is built with RG142 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to right angle QMA cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/crimp attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W17610/HS-36 can also be used in the other direction and will be a right angle QMA male to type N female bulkhead cable assembly if the opposite connectivity is required. Type N jack bulkhead to QMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to QMA cable assembly for quick shipment worldwide. Variations of type N and QMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to QMA RF cable assembly as per your requirements. |
| 233 | ||
| PE3W17610/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: QMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. N Female Bulkhead to QMA Male Right Angle Cable 24 Inch Length Using RG142 Coax with HeatShrink., Radio frequency assembly N female bulkhead to QMA male right angle cable 24 inch length using RG142 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The N female bulkhead to QMA male right angle cable 24 inch length using RG142 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to QMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a type N bulkhead cable connection on one end and a right angle QMA cable connection on the other. Our type N to right angle QMA cable assembly has a female gender on end 1 and a male on end 2. PE3W17610/HS-24 can also be known as a type N jack to right angle QMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.97-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W17610/HS-24 RF cable has a FEP jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 70 dB. Type N jack to QMA plug cable assembly PE3W17610/HS-24 is built with RG142 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to right angle QMA cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/crimp attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W17610/HS-24 can also be used in the other direction and will be a right angle QMA male to type N female bulkhead cable assembly if the opposite connectivity is required. Type N jack bulkhead to QMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to QMA cable assembly for quick shipment worldwide. Variations of type N and QMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to QMA RF cable assembly as per your requirements. |
| 233 | ||
| PE3W25610/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P086HF, RF Cable Type: PE-P086HF, RF Cable Impedance: 50 Ohm. SMP Female Right Angle to SMB Plug Cable Using PE-P086HF Coax with HeatShrink. PE3W25610/HS is a SMP female right angle to SMB plug cable using PE-P086HF coax. This Pasternack SMP female right angle to SMB plug cable assembly uses a 50 Ohm SMP for connector 1 and a 50 Ohm SMB for connector 2. SMP right angle to SMB coaxial cable assembly uses 90 degree right angle coax cable connector. Our female SMP right angle to plug SMB cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W25610/HS SMP female right angle to SMB plug cable assembly is constructed with PE-P086HF coax. | 0 | |||
| PE3W13610/HS | Pasternack Enterprises | 0 | ||||
| PE3W21610/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-600-DB, RF Cable Type: LMR-600-DB, RF Cable Impedance: 50 Ohm. 7/16 DIN Male to 7/16 DIN Male Cable Using LMR-600-DB Coax with HeatShrink. PE3W21610/HS is a 7/16 DIN male to 7/16 DIN male cable using LMR-600-DB coax. This Pasternack 7/16 DIN male to 7/16 DIN male cable assembly uses a 50 Ohm 7/16 DIN for connector 1 and a 50 Ohm 7/16 DIN for connector 2. Our male 7/16 DIN to male 7/16 DIN cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W21610/HS 7/16 DIN male to 7/16 DIN male cable assembly is constructed with LMR-600-DB coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE37610/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: MCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm. MCX Plug to BNC Male Cable Using RG223 Coax with HeatShrink. PE37610/HS is a MCX plug to BNC male cable using RG223 coax. This Pasternack MCX plug to BNC male cable assembly uses a 50 Ohm MCX for connector 1 and a 50 Ohm BNC for connector 2. Our plug MCX to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE37610/HS MCX plug to BNC male cable assembly is constructed with RG223 coax. | 0 | |||
| PE3W18610/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: UHF, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195-UF, RF Cable Type: LMR-195-UF, RF Cable Impedance: 50 Ohm. UHF Male to N Male Cable Using LMR-195-UF Coax with HeatShrink. PE3W18610/HS is a UHF male to N male cable using LMR-195-UF coax. This Pasternack UHF male to N male cable assembly uses a 50 Ohm UHF for connector 1 and a 50 Ohm N for connector 2. Our male UHF to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W18610/HS UHF male to N male cable assembly is constructed with LMR-195-UF coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W09610/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MMCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm. TNC Male to MMCX Plug Right Angle Cable Using RG188 Coax with HeatShrink. PE3W09610/HS is a TNC male to MMCX plug right angle cable using RG188 coax. This Pasternack TNC male to MMCX plug right angle cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm MMCX for connector 2. TNC to MMCX right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male TNC to plug MMCX right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W09610/HS TNC male to MMCX plug right angle cable assembly is constructed with RG188 coax. | 0 | |||
| PE3C8610/HS | Pasternack Enterprises | 0 | ||||
| PE3C3610/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-200, RF Cable Type: LMR-200, RF Cable Impedance: 50 Ohm. SMA Male to N Male Cable Using LMR-200 Coax with HeatShrink. PE3C3610/HS is a SMA male to N male cable using LMR-200 coax. This Pasternack SMA male to N male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm N for connector 2. Our male SMA to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C3610/HS SMA male to N male cable assembly is constructed with LMR-200 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
![]() Vyrian | 4610H-101-103LF | Bourns Inc | Array/Network Resistor, Bussed, Metal Glaze/thick Film, 2W, 10000ohm, 100V, 2% +/-Tol, 100ppm/Cel, Through Hole Mount RoHS : Compliant | 17,100 | ||
T610H-6T![]() | STMicroelectronics | TRIAC, 600V V(DRM), 6A I(T)RMS, TO-220AB RoHS : Compliant | 10,000 | |||
| LT8610HMSE#WTRPBF | Analog Devices Inc | Switching Regulator RoHS : Compliant | 9,000 | |||
| PCF50610HN/01 | NXP Semiconductors | 7,000 | ||||
| PCF50610HN01N1 | NXP Semiconductors | 4,250 | ||||
| C01610H00601012 | Amphenol Corporation | Circular Connector, 7 Contact(s), Polyamide66/Polyamide6, Male, Crimp Terminal RoHS : Compliant | 3,000 | |||
TDA9610H![]() | NXP Semiconductors | 950 | ||||
| ADS610HB | Texas Instruments | ADC, Flash Method, 14-Bit, 1 Func, 1 Channel, Parallel, Word Access, CDIP40 | 700 | |||
| MAX9610HEXK+T | Analog Devices Inc | Power Supply Support Circuit, Fixed, 1 Channel, BICMOS, PDSO5 RoHS : Compliant | 490 | |||
| ADS610H | Texas Instruments | ADC, Flash Method, 14-Bit, 1 Func, 1 Channel, Parallel, Word Access, CDIP40 | 370 | |||
| MAX9610HEXK+ | Analog Devices Inc | Power Supply Support Circuit, Fixed, 1 Channel, BICMOS, PDSO5 RoHS : Compliant | 280 | |||
XC95216-10HQ208C![]() | AMD Xilinx | Flash PLD, 10ns, 216-Cell, CMOS, PQFP208 RoHS : Not Compliant | 28 | |||
XC95216-10HQG208C![]() | AMD Xilinx | Flash PLD, 10ns, CMOS, PQFP208 RoHS : Compliant | 25 | |||
XC95216-10HQG208I![]() | AMD Xilinx | Flash PLD, 10ns, CMOS, PQFP208 RoHS : Compliant | 25 | |||
XC95216-10HQ208I![]() | AMD Xilinx | Flash PLD, 10ns, 216-Cell, CMOS, PQFP208 RoHS : Not Compliant | 20 | |||
![]() Win Source Electronics | WPN201610H1R0MT | Sunlord | FIXED IND 1UH 2.05A 90 MOHM SMD RoHS : Compliant |
| 990,000 | |
| WPN201610H2R2MT | Sunlord | FIXED IND 2.2UH 1.45A 170MOHM SM RoHS : Compliant |
| 316,000 | ||
| VLS201610HBX-1R0M-1 | TDK Corporation | FIXED IND 1UH 2.13A 72 MOHM SMD RoHS : Compliant |
| 162,030 | ||
| VLS201610HBX-4R7M-1 | TDK Corporation | FIXED IND 4.7UH 1.1A 370 MOHM RoHS : Compliant |
| 100,000 | ||
| VLS201610HBX-2R2M-1 | TDK Corporation | FIXED IND 2.2UH 1.45A 170 MOHM RoHS : Compliant |
| 20,000 | ||
| LT8610HMSE | Analog Devices Inc | 42V 2.5A Synchronous Step-Down Regulator with 2.5µA Quiescent Current |
| 3,000 | ||
LT8610HMSE#PBF![]() | Linear Technology | IC REG BUCK ADJ 2.5A SYNC 16MSOP / Conv DC-DC 3.4V to 42V Synchronous Step Down Single-Out 0.97V to 41.58V 2.5A Automotive 16-Pin MSOP EP Tube RoHS : Compliant |
| 1,900 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |